Infintiy in my area or not

A few weeks ago a enquired about upgrading to TV Unlimited and 40gb broaddband (I am currently on Option 1broadband). When my line speed was checked I was told that the speed was too slow for the TV package(between 1 & 1.5) and I did not have infinity in the area. When I checked for infinity the check told me it would be 30th June for Infinity in my area. So I thought, not long, I will wait. Now I have checked again and it is telling me September 30th 2012. What is going on here, when will we get Infinity? I thought that having to wait just a couple of weeks is ok, but it is not to be, another 3 months according to the check (Brigg area). If it is going to go on any longer I will be swtiching supplier, which I don't really want to do as I have been with BT for 30 years or more. Also, how can I find out when my phone and broadband contract ends, will it tell me in 'My Account'?

Sorry to have to say we've all been there when we first started looking into Infinity.  Those dates are regularly pushed back if the work hasn't been done for any reason, the most you should read into them is that if the checker is giving you a date then there are definite plans to install Infinity on your cabinet -  if there were no plans then the checker wouldn't mention FTTC at all.  If and when the checker says it's available now then of course that's different, that means precisiely what it says.
Puiblishing ever-shifting dates is bad PR, but that's how it is.

Similar Messages

  • Business Area is not getting updated in "Main Bank Account" Line item (FF_5

    Hi Gurus,
    I am executing T Code: FF_5 for uploading the "Multi-Cash" Format. This transaction clears the Bank Clearing Account and post the entry to the credit of "Bank Main Account".
    Now while i had executed F110, the Business area was properly captured in the Bank Clearing Account Line item. But while executing FF_5, the Business Area is not getting captured against the "Main Bank Account" Line item.
    Can you please tell me how to capture the Business Area against the "Main Bank Account" Line item.
    Rgds,
    Prasad.

    Hi,
    1. In case of Business where payments are made centrally it is important to report
        Bank A/c Business area wise.
    2. However I have solved the problem by doing "Sustitution", and its working fine. The Business Area is getting updated against the Main Bank Account Line item.
    3. I am however getting one error while doing the upload in FF_5. The error occurs
       only if Business Area is a "required" field in Bank Account's "Field Status
       Group".
       Error: (00 298) Formatting error in the field COBL-GSBER ; see next message.
       But if I make Business Area as an Optional Field I am not getting an error and
       also the posting is done to Main Bank Account.
    Is there anyother method by which this error can be corrected.
    I have assigned 2 points for your inputs. Can you help me to solve this error as well.
    Rgds
    Prasad

  • Planning area data not matching with backup cube / PSA

    Hi friends,
    while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
    At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
    Pls its urgent.
    Pts for sure.
    Vishal.
    9326179903

    make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
    if you got to /SAPAPO/SDP_EXTR then you can see this button
    you can set this up as a program scheduled to run before the updation of your cube
    As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
    Are you extracting at a detailed level or at the aggregated level
    Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

  • ReportViewer Parameter area state not saved without to refresh in ie

    Hi from Germany,
    we have created a master detail report with 3 levels and some parameters defined. Connected are these 3 reports by drill throughs with "go to report"-actions. We use the report manager for the navigation to the reports.
    For a faster go back from a detail report to its higher level report again we added links in the header with go to url actions and the expression "javascript:history.go(-1)").
    It works great but in the ie (version 10 and 11, too) there is a not wanted behavior after the user has updated the parameter values and clicked on "Show report". The report is rendered now with the changed parameters fine BUT the parameter area
    is still opened.
        First question: Is there a way to collapse the parameter area also with the click on "Show report"-Button?
    Now users close often the parameter section and drill through to the next level report. When you go from there back (history.go(-1) or also with the browsers back-button) the report before opens but again with an displayed parameter area. It forgots that users
    have collapsed it before.
        2nd question: It seems that the last state with the closed parameter area was not saved (in the session?). Can someone explain me why and if there is a way to solve it?
    In firefox it works like we wanted. There is the parameter area collapsed automaticly after go back in history. It seems it is realy a bug in the ie.
    I have found out a workaround:
    when you close the parameter area in ie and click after it on the refresh-button on the reportviewer-toolbar then the collapsed state is registered and go back to this report opens it right with collapsed parameters. Also a refresh by the browser-button opens
    the report with collapsed parameters.
    It seems for me it is a bug, isn't it?
    Kind regards
    René
    René

    Hi René,
    If I understand correctly, you want to hide the parameter area when the report render in report server. I have create a simple report to test, however, I cannot reproduce the same issue.
    Based on my test, it has two situation when we go to subreport the parameter area cannot hide.
    If we are use “Go to URL” action jump to the subreport, it will not hide the parameter area.
    We have not pass the parameter value to the subreport, it will display the parameter area for us to choose parameter value.
    If you are not above situation, we can use “Go to URL”
    action to work around it. To add parameter (rc:Parameters, rc:Toolbar) in report URL to control the parameter area visibility. Please refer to the following URL:
    Http://ServerName/ReportServer/Pages/ReportViewer.aspx? %2fReportFolder%2fReportName&rs:Command=Render&rc:Parameters=Collapsed
    Reference:
    http://blogs.msdn.com/b/jgalla/archive/2009/03/23/hiding-parameter-area-when-viewing-reports.aspx?Redirected=true
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • I have downloaded IOS7 on my iPhone and all calendar events have disappeared. The general functions of the calendar have changed and are definitely not 'user friendly'. How can I retrieve my calendar events. Will Apple improve the calendar function

    I have downloaded IOS7 on my iPhone and all calendar events have disappeared. The general functions of the calendar have changed and are definitely not 'user friendly'. How can I retrieve my calendar events. Will Apple improve the calendar function or revert to the previous system. Even the typing function on IOS 7 is faulty - very slow to respond to the keyboard. I no longer enjoy using my iPhone. Can anyone assist. Thank you

    Very strange! All of my calendar events have reappeared. This has happened one week after downloading iOS 7
    The calendar however,  is not easy to use.
    The typing function on the phone has  become even slower. Have to wait for each letter to show on screen.

  • My area is not on the drop-down list?

    just applied for skype number but my area is not on the drop-down list can't get any further until I choose something from the list, what do I do, just pick the nearest area?
    Post transferred to create its own new thread (topic);
    subject/title edited accordingly.

    Hi, ladyfromllan, and welcome to the Community,
    Yes, you are correct: you would need to choose a Skype Number nearest where you ultimately wished to have your Skype Number located.  Ultimately, the number would be best situated so that those who call it the most would not incur toll charges; however, that said, Skype Numbers are not available absolutely everywhere for several legitimate reasons.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • E-mail messages sent, are received not in the paragraph-form as sent, but

    Dear Friends,
    E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with just two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
    Yours Truly,
    GMS.

    Dear Friends,
    E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer
    business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
    Yours Truly,
    Broduff.

  • HT204411 iTunes store - I live in the German speaking part of Switzerland (and have a credit card address here too) but want to watch films in English, Italian, or French. Why are films not available in these other languages ?

    Hello, I live in the German speaking part of Switzerland (and have a credit card address here too) but want to watch films in English, Italian, or French. Why are films not available in these other languages ? Unless I am mistaken, iTunes Switzerland is far from Swiss and does not encourage its people to watch films in the local languages of its country (at least French and Italian would be good too...). Can anyone help ? Do I have to move to Geneva to watch a non French film in French or Lugano to watch a non Italian film in Italian or simply buy a DVD to get round it?

    I have the same problem. I want to watch any movies in French (in the original, or subtitled and/or dubbed). But I cannot seem to find any on iTunes. Does iTunes offer any content in other countries (I live overseas) in the languages of those countries?

  • Ive restored my Ipod nano and the songs that I've already purchased are now not syncing to my device. How do I get those songs back on the nano?

    Ive restored my Ipod nano and the songs that I've already purchased are now not syncing to my device. How do I get those songs back on the nano?

    Either redownload them directly to the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    or sync them to your iPod via iTunes
    iTunes: Syncing media content to iOS devices and iPod            

  • Hallo! How can i delete my files wich are saved not on the C: drive?

    Hallo! How can i delete my files wich are saved not on the C: drive?

    I'm guessing there must be more to this question than you are stating.
    But to answer the question you asked, if you want to delete files that are not on the C drive, select the files and then delete them (press the Delete key, and then Delete from Hard Disk or not, your choice)

  • SetText() works for one text area but not for another

    I am student new to java so forgive me if I'm making an obvious mistake. I have a GUI with 3 tabs. Two tabs have a text area in each in them and an action listener tells the textarea what to print. The problem is one text area works and the other doesn't. they are declared in the same way so I can't see why the problem occurs.

    If you have copied and pasted code for the second one, it is possible that you are setting text for the first text area at both the places. Check if you are calling the setText method on both the text areas and not the same one twice.

  • Business area is not appearing in the FBL1N

    Hello Experts,
    Please give me your valuable suggestions for below issue.
    Business area is not appearing for few transactions for particular vendor in TC:  FBL1N, We are using Ecc 6.0. Please advice.
    Thanks,
    Ratnam V

    Please review note  549182  FAQ: Business Area Accounting
    in particular see point  3.
    3.         Question:
    With customer and vendor items, why can you not enter a business area?
    Answer:
    Open items are assigned to business areas depending on the expense and
    revenue items of the invoice.
    Because of this dependency, open items can be assigned to several
    business areas. Thus the assignment is no longer unique. There is a
    function available in the balance sheet adjustment that enables a
    subsequent assignment.
    With a unique dependency, the business area is copied into the open
    items not assigned to a business area during the posting of the
    document.
    Also consider SAP Note 41294 in this context.

  • In Photoshop CC 2014, why are strokes not perfect 1px strokes as they were in the previous PS version? They are thicker/blurry on some sides!

    In Photoshop CC 2014, why are strokes not perfect 1px strokes as they were in the previous PS version? They are thicker/blurry on some sides!

    See if turning on "Align Edges" helps: Align and Snap to Pixel Grid in Photoshop « Julieanne Kost's Blog

  • I've tried everything suggested on forums, but my iMessage and FaceTime are still not working. Any suggestions?

    I've tried everything suggested on forums, but my iMessage and FaceTime are still not working. Any suggestions?

    Hi katz2010!
    I have an article for you here that may help you find those apps again:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I have over 4000 songs in my Itunes library.  I have 25-30 playlists det up.  I just did a sync on my daugthers itouch and 85% of my playlists dissappeared.  i rebooted my pc....playlists are still not there.  very strange.  advice appreciated

    I have over 4000 songs in my Itunes library.  I have 25-30 playlists set up.  I just did a sync on my daugthers itouch and 85% of my playlists dissappeared.  i rebooted my pc....playlists are still not there. The songs are still in my library.   Very strange.  Any Advice appreciated

    Thanks, Michael.  Itunes Match is not enabled on my daughter's Itouch.  I have subscribed to it and have used the service to back up my song purchases.  I merely did a sync via USB (as normal) to her Itouch.  The sync wiped out 85% of the playlists that were on my home computer for the last seveal years.  I have updated her itouch multiple times - both before and after I had subscribed to iTunes Match.  After the last sync to her iTouch, the playlists just disappeared.   My home computer is the main device I use to manage my Itunes library and my playlists.  I am not sure what happened?
    BTW - how are you affiliated with Apple?  Are you?  I feel like I have explained the issue pretty clearly, but your responses seem to focus on her iTouch and not my computer, where the playlists are managed.  I want to know how to get the playlists back on my computer.
    Thanks for your help.  Rob

Maybe you are looking for