Inflow and out flow
i dont know whether i am right or wrong
in info object
->under aggregation
->non cumulatine changes
inflow-------
outflow----
for example take obalance
inflow- credit
outflow- debit
so we get the output of 0balance
is my example correct?
please suggest me
i will asssign points
Hello
0ISSVS_VAL : *12.236,39 *
0RECVS_VAL : *23.155,20 *
0VALSTCKVAL: 39.897,96 EUR
I have the issued stock ,received stock and the valuated stock! The issued stock and the received stock is used as an inflow and outflow for valuated stock.
Now how the values is calculated ?
Thanks
Ram!
Points will be assigned!
Similar Messages
-
Non cumulative with inflow and out flow vales cant be seen in report
Hello
I have 0VALSTCKVAL Value of Valuated stock with inflow 0RECVS_VAL and Outflow 0ISSVS_VAL.
The Data is loaded into 0IC_C03 cube From BX Extractor and when I create the BEx Report it shows me the value only for the 0VALSTCKVAL.
I cannot see the value for inflow 0RECVS_VAL and Outflow 0ISSVS_VAL. What is the logic used behind this!
How can we know the reference value?
Informations please!
Points will be assigned!!
Thanks
RamHello
0ISSVS_VAL : *12.236,39 *
0RECVS_VAL : *23.155,20 *
0VALSTCKVAL: 39.897,96 EUR
I have the issued stock ,received stock and the valuated stock! The issued stock and the received stock is used as an inflow and outflow for valuated stock.
Now how the values is calculated ?
Thanks
Ram!
Points will be assigned! -
FI Cash in flow and Out flow report
Hi Experts,
How to get a report from BSEG and SKA1 tables based on refrence key and g/L account.
the user asked a report cash in flow and cash out flow report by joining these two tables.
Pls suggest how to achive this?
thanks,
Anand ReddyHi Reddy,
0GL_ACCOUNT_ATTR is the datasource for table SKA1.
0FI_GL_14 is the data source related to table BSEG.
create an infoset or MP on top of these two and build the report.
Edited by: prashanthk on Oct 1, 2010 1:18 PM -
Non cumulative key figure is not getting filled based on inflow and outflow
hi,
i have a non cumulative key figure which is having inflow and outflow.
i have these three info objects in dso.
as i know non *** key figure is calculated based on inflow and outflow.
i am getting values for inflow and outflow so non *** should be calculated based on this values.
<b>but the collumn is blank in the dso</b>
in that non *** keyfigure i have added two info objects in inflow and outflow.
is there any other setting i nedd to do?
please sugest me.
its urgentHi Venkat,
Have you followed the process right. First Filling the Initial Stocks and then Inflow and Out Flow and then Delta. If you follow the process correctly then you can able to view the Data in the Reporting Level.
For Initial Stocks the Marker Should be set. For Inflow and Outflow the Marker should not be set.
Hope This Helps,
Regards,
rik -
Can anyone explain me abt Cash inflow and outflow
Hi all,
Can anyone explain me the cummulative cash inflow and out flow available while creating an info object. with an example in realtime scenario.
thanxs in advance
hariHi,
Mainly inflow and outflow is using in inventory only. So take the inventory live scenario and understand the logic. Pay some passion to read the below doc. Coz it will explain the complete design of the inventory.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards,
Vivek V -
Any SAP report to capture Foreign currency Inflow and outflow
Hi Guru
Any report available which can provide Inflow and Outflow amount in a Company code in Foreign currency.
Account recievable report+ Account Payable report
I was thinking of using BSIK/BSAK and BSAD/BSID tables for this.
Report shud have these columns
For Each Vendor and Customer >>>>>>
Opening Balance This month Debit This month credit
it is to get closing balance..
please advise.........if no standard report than any logic will also be welcomed.
Edited by:
Edited by: AJeet N on Sep 14, 2010 1:27 PMYou can also try out the report HINUACRP.
Regards,
Santosh. -
Blurry/Scaled Down Artwork Column and Cover Flow are in 9.2
i have noticed on my iMac 27" that the album artwork is really blurry, and when i double click the art work at the left bottom and enlarge it, it looks fine. For some reason Apple scales down the pixel size of images and it looks really blurry. Before it was the standard 600x600 artwork that looked beautiful but not anymore..
This is an infuriating problem as I have taken a lot of time to embed high res art in my fles. The art still remains hi res in the bottom left, but in cover flow or the album artwork column it is a crappy looking blurry image.I noticed this also. And yes, it infuriates me too. I used to browse my music collection in Cover Flow on a 46" LCD. Not any more since iTunes 9.2. iTunes 9.2 comes with several new features and improvements, including this one: "Album Artwork improvements make artwork appear more quickly when exploring your library".
It turns out that the album artwork cache build by iTunes consists of scaled down copies with a size of 128x128!!! These scaled down copies are used in the album artwork column, grid view, and cover flow. Not much you can do about it except give feedback (http://www.apple.com/feedback/itunesapp.html). That's what I did. -
Analysing Task Audit, Data Audit and Process Flow History
Hi,
Internal Audit dept has requested a bunch of information, that we need to compile from Task Audit, Data Audit and Process Flow History logs. We do have all the info available, however not in a format that allows proper "reporting" of log information. What is the best way to handle HFM logs so that we can quickly filter and export required audit information?
We do have housekeeping in place, so the logs are partial "live" db tables, and partial purged tables that were exported to Excel to archive the historical log info.
Many Thanks.I thought I posted this Friday, but I just noticed I never hit the 'Post Message Button', ha ha.
This info below will help you translate some of the information in the tables, etc. You could report on it from the Audit tables directly or move them to another appropriate data table for analysis later. The concensus, though I disagree, is that you will suffer performance issues if your audit tables get too big, so you want to move them periodically. You can do this using a scheduled Task, manual process, etc.
I personally just dump it to another table and report on it from there. As mentioned above, you'll need to translate some of the information as it is not 'human readable' in the database.
For instance, if I wanted to pull Metadata Load, Rules Load, Member List load, you could run a query like this. (NOTE: strAppName should be equal to the name of your application .... )
The main tricks to know at least for task audit table are figuring out how to convert times and determing which activity code corresponds to the user friendly name.
-- Declare working variables --
declare @dtStartDate as nvarchar(20)
declare @dtEndDate as nvarchar(20)
declare @strAppName as nvarchar(20)
declare @strSQL as nvarchar(4000)
-- Initialize working variables --
set @dtStartDate = '1/1/2012'
set @dtEndDate = '8/31/2012'
set @strAppName = 'YourAppNameHere'
--Get Rules Load, Metadata, Member List
set @strSQL = '
select sUserName as "User", ''Rules Load'' as Activity, cast(StartTime-2 as smalldatetime) as "Time Start",
cast(EndTime-2 as smalldatetime) as ''Time End'', ServerName, strDescription, strModuleName
from ' + @strAppName + '_task_audit ta, hsv_activity_users au
where au.lUserID = ta.ActivityUserID and activitycode in (1)
and cast(StartTime-2 as smalldatetime) between ''' + @dtStartDate + ''' and ''' + @dtEndDate + '''
union all
select sUserName as "User", ''Metadata Load'' as Activity, cast(StartTime-2 as smalldatetime) as "Time Start",
cast(EndTime-2 as smalldatetime) as ''Time End'', ServerName, strDescription, strModuleName
from ' + @strAppName + '_task_audit ta, hsv_activity_users au
where au.lUserID = ta.ActivityUserID and activitycode in (21)
and cast(StartTime-2 as smalldatetime) between ''' + @dtStartDate + ''' and ''' + @dtEndDate + '''
union all
select sUserName as "User", ''Memberlist Load'' as Activity, cast(StartTime-2 as smalldatetime) as "Time Start",
cast(EndTime-2 as smalldatetime) as ''Time End'', ServerName, strDescription, strModuleName
from ' + @strAppName + '_task_audit ta, hsv_activity_users au
where au.lUserID = ta.ActivityUserID and activitycode in (23)
and cast(StartTime-2 as smalldatetime) between ''' + @dtStartDate + ''' and ''' + @dtEndDate + ''''
exec sp_executesql @strSQLIn regards to activity codes, here's a quick breakdown on those ....
ActivityID ActivityName
0 Idle
1 Rules Load
2 Rules Scan
3 Rules Extract
4 Consolidation
5 Chart Logic
6 Translation
7 Custom Logic
8 Allocate
9 Data Load
10 Data Extract
11 Data Extract via HAL
12 Data Entry
13 Data Retrieval
14 Data Clear
15 Data Copy
16 Journal Entry
17 Journal Retrieval
18 Journal Posting
19 Journal Unposting
20 Journal Template Entry
21 Metadata Load
22 Metadata Extract
23 Member List Load
24 Member List Scan
25 Member List Extract
26 Security Load
27 Security Scan
28 Security Extract
29 Logon
30 Logon Failure
31 Logoff
32 External
33 Metadata Scan
34 Data Scan
35 Extended Analytics Export
36 Extended Analytics Schema Delete
37 Transactions Load
38 Transactions Extract
39 Document Attachments
40 Document Detachments
41 Create Transactions
42 Edit Transactions
43 Delete Transactions
44 Post Transactions
45 Unpost Transactions
46 Delete Invalid Records
47 Data Audit Purged
48 Task Audit Purged
49 Post All Transactions
50 Unpost All Transactions
51 Delete All Transactions
52 Unmatch All Transactions
53 Auto Match by ID
54 Auto Match by Account
55 Intercompany Matching Report by ID
56 Intercompany Matching Report by Acct
57 Intercompany Transaction Report
58 Manual Match
59 Unmatch Selected
60 Manage IC Periods
61 Lock/Unlock IC Entities
62 Manage IC Reason Codes
63 Null -
Data Models and Data Flow diagrams.
Hi Gurus,
Can anybody brief me the concept of Data Models and Data Flow Diagrams and their development with illustrations. And is it a responsibility of a Technical or a Functional consultant..i.e to translate Business requirements and functional specifications into technical specifications, data flow diagrams and data models.
Your valuable answers will be rewarded.
Thanks in advance.Hi,
Concept of Data Models
Data model or Data modelling is basically how you define or design your BW Architecture based on Business requirements. It deals with designing and creating a effcient BW architecture sticking to standard practices.
Multi-Dimensional Modeling with SAP NetWeaver BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
/people/githen.ronney3/blog/2008/02/13/modeling-strategies
Modeling the Data Warehouse Layer with BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3668618d-0c01-0010-1ab5-aa75c3a4dfc2
/people/gilad.weinbach2/blog/2007/02/23/a-beginners-guide-to-your-first-bi-model-in-nw2004s
Data Flow Diagrams
This show the path of data flow for each individual object in BW. How data dets loaded into that object and how it is going out of the object etc.
Right click on the data target > show data flow .
It shows all the intermdeiate layer through which data comes into that particular object.
Responsibility of a Technical or a Functional consultant
This is done genrally in the designing phase itself by a Senior Technical Consultant with the help of a Functional consultant or a Techno=Functional consultant interacting with Business.
Hope this helps.
Thanks,
JituK -
Tangent In and Out per channel?
I can get the tangent in and out for the curve as shown in the composite view, but is it possible to obtain the tangents from the individual x, y, and z curves as shown in the graph editor?
Routing id is per agreement right?Routing id is per document definition.
I am trying to listen all the message flowing through B2B engineJust do not specify anything in routing id for all your document definitions. In this case all inbound messages will be enqueued with recipient as "B2BUSER".
Regards,
Anuj -
Safari 4's Top Sites and Cover Flow is missing!
So I downloaded the new Safari beta and tried it out. Top Sites and Cover Flow was missing and I couldn't find it anywhere. I installed the latest graphics driver for my computer but still no top sites. Ugh - THE PAIN!
Specs: Windows XP Pro SP3, 75GB HD, 512 RAM, 96MB intel GRAPHICS.
Please answer!!is your graphics card compatible with DirectX 9.0 and,
also do you have DirectX 9.0?
if you don't you need to get it, without CoverFlow and TopSite's don't work -
OWB : Runtime Repo for Target and Process Flows on Different M/C
Hi,
I have an environment where the Runtime Repositories for the Target Warehouse and Process Flows ( Workflows ) are on different machines. I have deployed :
* the mappings and Target Tables on the Target Warehouse
* Process Flows on the Workflow Server which resides on a seperate M/C.
When I try executing the Process Flows for the Mappings , it errors out indicating that the objects may not have been deployed. Looks like the Process Flows cannot see the Mappings deployed.
Can somebody help me here ?????I think target schema and runtime rep shuould be in same instance
-
Hi,
I have an ASA5510 running version 8.2(5). I have set up a new network on interface Ethernet0/1.777 of the fwl. The firewall works perfectly with remote access VPNs but has now given me the error with the new network that has been set up:
%ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.159.159.3/49204 dst tru777:10.1.34.19/3389 denied due to NAT reverse path failure
The difference between the other networks and the new one that I have set up is that this is the first one using a private addressing scheme. I understand that NAT is not allowing something along the way but I cant figure out what needs to change in order to get it to work. My config is as follows:
interface Ethernet0/1.777
description TRU 777
vlan 777
nameif tru777
security-level 50
ip address 10.1.34.17 255.255.255.240 standby 10.1.34.18
access-list acl_tru777 remark * ALLOW ALL OUTBOUND *
access-list acl_tru777 extended permit ip any any
access-list RA-VPN extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 10.0.0.0 255.0.0.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 172.16.0.0 255.240.0.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list acl_ra-lock-tru777 extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
access-list acl_ra-lock-tru777 extended permit ip 10.159.159.0 255.255.255.0 10.1.34.16 255.255.255.240
ip local pool ra-pool 10.159.159.0-10.159.159.254 mask 255.255.255.0
nat (tru777) 4 access-list acl_no-nat
nat (tru777) 2 10.1.34.16 255.255.255.240
global (outside) 2 x.x.x.x
crypto isakmp nat-traversal 20
I think that is everything you should need, if not please just ask.
Thank you very much in advance,
ChrisHi Julio,
Here you go:
FWL01# sh nameif
Interface Name Security
Ethernet0/0 outside 0
Ethernet0/1 CLIENTS 50
Ethernet0/1.314 tru01 50
Ethernet0/1.313 dmz01 50
Ethernet0/1.316 tru02 50
Ethernet0/1.776 dmz776 50
Ethernet0/1.777 tru777 50
Management0/0 management 100
FWL01# sh run nat
nat (tru02) 1 192.168.3.0 255.255.255.240
nat (tru777) 4 access-list acl_no-nat
nat (tru777) 2 10.1.34.16 255.255.255.240
FWL01# sh run glob
global (outside) 1 interface
global (outside) 2 x.x.x.x
Thanks,
Chris -
Compressor 3.02 In and Out Points Not Correct
This is a follow up to my compressor truncating movies post. I'd like to reiterate that my workflow has not changed and no new software has been added to my system. This work flow used to work like a charm, however after the most recent pro applications update this bug surfaced.
If i drag and drop any uncompressed .mov into compressor, compressor incorrectly detects the in and out points for that clip and truncates the file on output. It seems to be by the same amount every time.
Example:
Clip 1 is a 320x240 uncompressed .mov file created and exported directly from final cut pro (exported as self-contained). the file is 1:53:32 in duration.
Drop that clip into compressor and it sets the in-point at 59:56:09 (it does this every time no matter what clip i try to compress...) and incorrectly reports the duration of the movie as 1:53:05. these in and out times and duration are found in the preview window. no in and out points are set in compressor.
this being said, the resulting output file (same size, same frame rate - no changes to timing) is truncated and the last 4 seconds and change are cropped off the end of the clip.
Any ideas? anybody else have the same kind of problem and find a fix?
I've trashed preferences to no avail... help!
karlright - the question is... what do we do about it?
i have been able to narrow this down to a problem with footage that's 23.98 fps only however as this is part of my 24p workflow - and because it's the only reason i'm using fcp at this point -- in essence, this problem renders the entire final cut studio useless.
so frustrating!
who's found a workaround/fix for this?? i've been using this same workflow successfully for years and in previous versions of final cut. this problem only surfaced in the past couple of weeks.
AAARGH!
k -
Hi Experts,
Iam going through a peculiar problem.I have data flowing from R/3 to master data Info provider 0Requi. I have validated the data between R/3 and the master data info provider, it is found to be good. This data is being loaded from 0Requi to a staging write optimized DSO. there are routines in the Transformations for the DSO. when I check and compare the data, I found that out of 625 records in the Source only 599 were available in the target, and out of 599 records 17 records are duplicate and 29 records have not been populated from source to target.
Any help to solve the issue will be highly appreciated and thanked with suitable points.
Thanks and Regards
SHLThank you very much Jen, Full points to you.
There was nothing in the error stack. Sy_Subrc in the routine was giving the problem. It has been rectified and the Data is loading fine in the development system.
Now I am in another peculiar situation.
The routines, after debugging, are working good in the development system but after transporting to Quality system for testing, they are failing there. Iam facing the same old problem there again. The transports are checked, they were done properly. The ABAPer is satisfied with the transported code. If you can then please guide me.Iam closing this thread and opening a new thread with Subject as " In different behavior of Routines"
Thank you once again Jen. Full points assigned to you.
Kind Regards
SHL
Maybe you are looking for
-
The name 'InitializeControl' does not exist in the current context
Hi , i try to run my visual web part in vs2012,without adding any code to template i deploy web part into sharepoint2013. but i got below error The name 'InitializeControl' does not exist in the current context.how can i solve this error Thanks, Madh
-
IPhone 4s charger with Japan plug used in Australia
Hi, first time question. Two years ago I bought an iPhone 4S (black) in Australia with an Australian plug for my partner. Last week I purchased an iPhone 4S (white) from an Australian supplier on Ebay Australia. The phone arrived and (somewhat unsurp
-
The printing of .pdf file from Project 2013 stops when the file name should be written. Project 2013 crashes. Does someone know what is wrong between Project 2013 and Adobe Acrobat 9?
-
Dear Friends I am using ECC 6.0 IDES try to create my own enterprise structure by copying std 1000 after completion of define and assigned checked in EC01 which is showing all assignment of enterprise structur but when I am creating Material MM01
-
Can anyone tell me how to stop my screen flickering ?
It goes light and dark, but never black. It just dims and bright. maybe 2-3 times every 10 seconds .