Info type 0003 View indicator Error

Hi SAP Gurus,
Recently we have upgraded our system from R3 4.7 to ECC 6.0.Now in testing i have found that when i try to change the entry date of an employee then system gives me the message
"Organizational reassignment not permitted**
*Message no. PG162*
*Diagnosis*
*The organizational reassignment is not possible because*
*The previous and new personnel areas are assigned to different country groupings (MOLGA)*
*or*
*The organizational assignment (feature IVWID) and the employee have different infotype view indicators.*
*System Response*
*The organizational reassignment is rejected.*
*Procedure*
*Check the attributes of the personnel areas, the settings in feature IVWID, and the employee's infotype view indicator in the Payroll Status infotype (transaction SE16, table PA0003, field VIEKN).*
As per the procedure given when i checked the  VIEKN field in PA0003 i found that its blank and in feature IVWID for country grouping 40 return value is 40 itself.I have checked for other employees also and for each one field VIEKN is blank.
When i compared the upgraded test system with the previous R3 system i found that field VIEKN is blank there for all employees and in feature IVWID there is no entry for  country grouping 40 and system is returning the value through a function "RP_GET_IVWID"
Can any body suggest what should i do for this scenario.
Regards

Hi,
In brief the issue is this that for all the employees whose master data were already present on the system before upgrade for all of them "VIEKN" field in info type 0003 is blank as before upgarde in feature IVWID there were no entry in our system for country grouping 40.
Now in upgarded system In feature IVWID there is an entry for country grouping 40 hence when ever i do any kind of the action on previous employees system gives error to me that no oraganization reassignment possible because of mismatch in IVWID and field VIEKN in info type 0003.
Now i want to ask should i maintain VIEKN field for all the existing employees or should i remove country grouping entry in feature IVWID.

Similar Messages

  • Infotype 0003  View Indicator

    Hi
    Any body have idea about view indicator in Infotype 0003.
    While running separation action it is giving error orgnanizational reassginment not permitted.
    By intial checking i found that VIEKN View indicator is not maintained.
    Now my problem how can i maintian it , as in infotype 3 there is no such data entry field called view indicator but the field in the table pa0003.
    Note : I cant maintain it through SE11.
    Please if you could provide any idea it would be worth for me.
    Please let me know if more clarification required.
    Thanks
    Manoj Shakya

    HI
    This report enables you to repair inconsistencies concerning Data Sharing. The report can perform the following repairs:
    If a personnel number (object type P) is not linked to other personnel numbers by the central person (object type CP), that is the employee has only one personnel assignment, the report corrects incorrect grouping values. Technical splits are also generated for this purpose if necessary.
    If several personnel numbers are linked to each other that indicate different data in the grouped infotypes, this data is compared.
    The processing sequence determines the direction in which the data is compared: the report always attempts to make as few changes as possible to the data of the "first" personnel number. The data of the next personnel numbers in order may also have to be adjusted or even deleted. The report interprets the data of the first personnel number as more important or more correct than the data of the next personnel
    Thanks
    Manoj Shakya

  • Error in info type 0001

    Hi all
    when hired an employee, while saving 0001 info type inpa40
    system shows one error
    " Define a fiscal year variant first for company code 9369"
    anyone solve prob
    thanks and regards
    Seenu

    thanks for reply
    after filled this table (V_001_U) i got one error in info type 0001
    "Define a chart of accounts first for company code 9369"

  • Report Viewer Configuration Error

    Hi,
    I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
    when attempting to open a report in the Microsoft Visual Studio Report Viewer:
    Report Viewer Configuration Error
    The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
    Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
    path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
    Internet Information Services 7 or later.
    Has anyone seen this error before, or have any advice on finding a solution?
    Thank you.

    Hi HealthServices3300,
    You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
    For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
    issue, please post this issue to
    this forum. If it's a report viewer control issue, you can post this issue in
    this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Problem with customized info type creation

    hi
    When i am creating customized info type using T-code PM01, i get error message like "package in non original system only modifiable with organizer tools".
    The above message is coming whenever save the infotype in either customized package or local package.
    As per my observation when i save the infotype, it default takes SAP package So i need to change that package.So how can i change the package in T-code PM01.
    Please tell me the solution to overcome the error.
    Thanks,
    Ali

    Hi,
    Since infotype attribute in table T582A is clent specific, so you should maintain the entries in the target client.
    Create the table entry of your infotype in the other client in view V_T582A (infotype attribute) or via t-code PM01 and click button 'infotype characteristics. Also you can transport CR from client to client via t-code SCC1 as well.
    Hope helps,
    Chen Jian

  • HR PQAH (Ad hoc query) info-type filtering

    Hi,
    in our company the users can use/create HR ad hoc queries (tcode PQAH) with which they can display almost all master data employees informations.
    Is it possible to use P_ORGIN authorizations in roles in order to filter info-types in ad hoc query ?
    We have created a test user only authorized to start PQAH (on S_TCODE & P_TCODE) and he is able to create a PQAH query that can display all HR master data.
    We were expecting that P_ORGIN was also checked in PQAH.
    Any suggestion ?
    Thanks
    Andrea

    Hi Andrea,
    No, not what I said.  Employees with access to PQAH can both construct and run Ad Hoc Queries.  However, if their authorization does not permit display access to an infotype in the query, the query will not run for that individual.  If she has the proper access, then the report will run for those individuals she can view - controlled by P_ORGIN or P_ORGINCON.  If the query is saved, another employee can then run it via PQAH or SQ01.  Again, that employee's access will limit what he can see in the output. 
    So if a user has access to PQAH, that user can create and run queries, but the security authorization from P_ORGIN will determine the output.  Example:  I create a query that includes ANSAL from IT0008-Basic Pay, but I do not have P_ORGIN access to view IT0008, then the report would error out if I tried to run it.  If I did have authorization to view IT0008, I could execute the report via PQAH and receive the output.  If I save the report and you ran that same report via PQAH, but you have view authorization only for Personnel Area 0001 for IT0008, then your output would only include individuals assigned to PA 0001. 
    So PQAH can be used by various individuals what controls the output is their authorizations from P_ORGIN or P_ORGINCON and other authorization objects.
    Paul

  • Custom table needs to be updated based on changes in Info type P0000

    Hi All,
       I have a requirement wherein when we make changes to info type P0000 this should be reflected to a custom table.
    If i create a new record, delete an existing record or make changes to a record in INFOTYPE P0000 this should also be reflected in my custom table.
       My custom table has 5 fields from info type p0000 and some custom fieds.
       please can you let me know exactly which user exit to use to acchieve the solution. and where exactly i can put the logic.
    Thanks,
    Mars

    Hi Venkat,
      I tried to code in the method AFTER_INPUT and executed but there are few thing which i have come across.
    1. when ever i create a new record in PA40 and each time i save the screens of PA40 this method is called and based on check it tries to update the table taht many times.
    2. The logic which i have used in the BADI implementations is as below:
      DATA: l_text TYPE string,
                 l_answer TYPE string,
                 lw_split TYPE XXXX.  (custom table)
      IF old_innnn NE new_innnn.
        lw_split-mandt = sy-mandt.
        lw_split-pernr = new_innnn-pernr.
        lw_split-begda = new_innnn-begda.
        lw_split-endda = new_innnn-endda.
        l_text = 'Does this employee need a split STIP?'.
            Display a pop up message to the user.
        CALL FUNCTION 'POPUP_TO_CONFIRM'
          EXPORTING
            titlebar                    = 'Choose'
            text_question               = l_text
            text_button_1               = 'Yes'
            text_button_2               = 'No'
            default_button              = '1'
            display_cancel_button       = space
         IMPORTING
            answer                      = l_answer
         EXCEPTIONS
            text_not_found              = 1
            OTHERS                      = 2.
        IF sy-subrc EQ 0.
          IF l_answer EQ '1'.
            lw_split-stflg = 'Yes'.
          ELSE.
            lw_split-stflg = 'No'.
          ENDIF.
        ENDIF.
        MODIFY TABLE  XXXX FROM lw_split.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
      ENDIF.
    3. when i try to activate this chunk of code it gives me error  saying "XXXX" is unknown. i tried to declare it under TABLES but in Vain.
    4 I have also tried to use the modify statement in IN_UPDATE instead of updating custom table in same method but its giving me same error "XXXX" is unknown. i tried to declare it under TABLES but in Vain.
    can you let me know your view on this. The above chunk of code is in case of creating a new record in P0000 info type.
    Thanks,
    Mars
    Edited by: Mars878 on Oct 13, 2009 9:18 AM

  • How to create a view indicating column's length?

    SQL>create table abc (a number(12));
    I want to create a view cde with a length of number(5) by "describe cde" in sql*plus.
    SQL>create view cde(a) as select a from abc;
    SQL>desc cde
    A NUMBER(12)
    how to create a view indicating column's length? the actual value in abc only <1000
    I want to create a view cde with a length of number(5) .
    SQL>desc cde
    A NUMBER(12)
    Thank You
    Ming-An Zhang

    This does not make sense. How can a view be a NUMBER(5) and the actual column a NUMBER(12)?
    What happens if there is a 10 or 12 digit number in the table? Just what is the view suppose to do? Crash and burn? Where is the logic in that?!
    If the table's column has an incorrect precision and size, THEN FIX IT!! Do not hack it with view!
    It is silly purposefully building constructs into the database that can easily result in run-time errors.

  • How to change P.O. duplication message type from warning to error for Order

    Hi Experts,
    I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate.  I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType).   If this BAdI is not good way,  is there other way? and how to please?
    Please advise / help..
    Thanks, Jin

    Thanks Easwer for your help. 
    The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much.  I need to learn where I can see the system status of the template,  i.e.  I1034 (Order Template) or Order or Quotation .....?  if I need to filter out Quotation, I can easily do it in the BAdI.   Could you please provide me more details?
    Thanks again, Jin
    Thanks again, Jin

  • How to Enhance the info type in ECC 6.0,

    I  face a problem while enhanceing the infotype in EEC 6.0 ,
    but i know how to enhance in 4.7, here i face a problem is
    a error message comming like this
    "" SCREEN STRUCTURES AND CONVERSION CLASSES ARE NOT CREATED IN CORE SYSTEM"""
    what is that mean.
    actually i follow procedure in EEC 6.0 is
    initally go to T-CODE PM01 , then enter the info type num and click on edit button ,it will navigate into create the strrecture ,then iam creating the domain ,data element and save active.
    then  i click on GENERATE OBJECT button.
    finalliy i face above message like that,
    plz give me an idia ..
    Thank& Regards
    varma

    Please follow follwoing steps for PA infotypes.
    1. Execute PM01.
    2. Select 4th Tab as "SingleScrn" and enter infotype no. (eg. 0001).
    3. click Generate Objects button.
    4. Will get a screen for entering fields which u want to append to infotypes.
    5. Activate it.
    Pls mark necessary points if this helps to u.
    Regards,
    Ranjith

  • "Outlook cannot perform search. Cannot display view." error coming up when searching shared calenders in Outlook 2010.

    Hi,
    So I am having issues with the advanced find feature in Outlook 2010. When I goes to search a shared calender it gives me the "Outlook cannot perform search. Cannot display view." error. It is odd because it only does it with shared calenders
    and only when a calender is selected. If I search my inbox it works fine. It also works fine when I first open Outlook and perform a search without selecting any calenders. If I select on it then gives me the error. I have tried resetting the views, I ran
    cleanfinders and I went through this page (http://www.msoutlook.info/question/47) and rebuilt the index/scanned the pst/etc. Nothing seems to be working. I would appreciate some help if anyone knows why this would be happening. 
    Thank you for your time,
    Gabe M. 

    Pst file size would not cause this and Outlook 2010 can have huge pst files as long as you use the new Unicode format.
    If the problem is a corrupt view, cleanviews will clear it. I'm sure there are other causes besides corrupt views, but I can't think of any at the moment.
    Does it work in Safe mode? To open Outlook in Safe mode: Close Outlook then hold Ctrl as you click on the Outlook icon. You'll get a message asking if you want to start in Safe mode. Click Ok.
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • How to load info type 7410 career types to Jobs or Positions

    Hello Expert,
    I’m trying to use T-code PP01 to load career types and career levels (info  type 7410 )  by LSMW,
    But I’m not able to maintain info type 7410 by pp01,
    I had change the  table T77CD to accept maintain infotype from standard transaction,
    But getting below error:
    “Time constraint not found for S 7410”
    Any advice please on how to load career types and levels by LSMW
    Thanks

    Hello,
    I can't use HRTMC_PPOM with LSMW for data load,
    I had add also CP with 7410 , C & S was there for each career types only CP was missing and I add it, but still in PP01 not able to maintain career types , check attached
    Thanks

  • Changing screen layout of custom info type

    Hi we created a new custom info type from std info type 0002 .We want to realign the fields in the generated info type,but we get an syntax error if we chg it from the screen editor ... can u tell me how to chg it?

    Have you read <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf">Developing an Infotype in Personnel Administration</a> before creating your new infotype ?
    Look at pages 16-25. (in peculiar look for T588M and modification groups)
    Regards

  • Problem in HR Custom Info Type Creation

    Hi,
    Created custom info type from PM01...
    Activated... This is working fine in the System and Client where I created.
    But its not working from other client..?
    I am getting error by saying that Info Type is not created... All the Structure and PAXXXX table got activated in both Clients.
    Earlier we faced same problem, at that time our team made some changes to info type and probelm resolved.
    I don't know where and what exactly we need to do...
    But,
    One of the problem I identified is,
    We are not getting T591A, T591S tables at Subtype Tab, Subtype text tab in INFOTYPE CHARACTERSTICS.
    I can enter these two from TECHNICAL ATTRIBUTES... but when I generate all aobjects from PM01, these two values getting deleted from INFOTYPE CHARACTERSTICS.
    (Above may be the reason)
    Please let me know if any solution for this.
    Thanks,
    Naveen Inuganti

    Hi Gautham,
    I deleted previous one, Created as your blog says. Still same problem.
    Venkat,
    Yes, you are correct. We need to release the Customizing request which contains Subtype , Subtype Text Tables with Info Type Entries.
    Problem with Info type Creation
    Thanks,
    Naveen.I

  • How can we view the error message numbers in the web ui?

    Dear all,
    How can we view the error message numbers in the web ui? It gives the error but no number.  It is possible to debug in web UI so how can we accomplish this?
    Thanks,
    FK

    Hi  Fakhan,
    You can absolutely do that.
    Check the class: CL_BSP_MESSAGES
    Also if you want to find out the exact Message Class and Message Number, go to table T100, type text in field TEXT, you will get Message Class and Message number in fields ARBGB and MSGNR respectively.
    I hope this helps.
    THanks
    Vishal

Maybe you are looking for