Infopath 2013 - Values are not appearing in a drop down field referencing site column which uses lookup in custom list
I have a master custom list that has a set of site columns. For each site column there is a lookup to a custom list with reference data. When I edit the list in data entry view all values in drop down fields work fine, but when I customize the form for
the master list, no data appears in the drop down fields. I can change the data binding on the form so it references the the correct data and when I preview the form it works. But when I publish it, no data is available in these drop down fields.
Hi shakonarson,
According to your description, I try to reproduce your scenario but the lookup field works fine.
When we customize the form for the list in the InfoPath 2013 , it is by design that the Drop-Down List Box control cannot display its value.
For troubleshooting your issue, please take steps as below:
Go to lookup List Box on your form in InfoPath 2013 , right click it and choose “Drop-Down List Properties” from the bottom of your field menu.
Make Sure you select “Get choices from an external data source” and correct Data source.
Make Sure the Xpath of Entries is “d:SharePointListItem_RW” under the dataFields.
Here is a good blog for sorting lookup column DropDown by customizing your list form with InfoPath you can have a look:
Sort SharePoint lookup column Dropdown by customizing your list form
with InfoPath
Hope this helps!
Best Regards,
Eric
Eric Tao
TechNet Community Support
Similar Messages
-
Tax codes are not appearing in FB70 drop down list.
Hi all,
I have created some new taxcodes and assigned them with company code.
Now these tax codes are not appearing in FB70 down list.
Can anyone suggest the solution for this?
Thanks & regards,
Rupam.HI,
To appear the TAX codes in FB70 dropdown list you need to assign those new tax codes in the below configuration.
Spro -> financial accounting -> Accounts Receivable and Accounts Payable ->Business Transactions-> Outgoing Invoices/Credit Memos->Outgoing Invoices/Credit Memos - Enjoy ->Define Tax Code per Transaction
in that selct your country and in the next screen select new entries button and add those new tax codes. when adding chose the option FIAR FInancial accounting out going invoices. and save the entries.
after this setting you can able to see those new tax codes in FB70 dropdown list.
hope this helpful.
Regards,
Sandhya. -
Payscale group and levels values are not appearing in IT0008
Hi Friends,
I craeted Payscale group & Level in V_T510. Eventhough these values are not coming as F4 (drop down)values in IT0008.
Pls adivice where I have missed the configuration.
ThanksHi..
ESG/CAP and and its grouping in V-t510 have already been maintained. however still it is not coming as drop down values.
Pls suggest to resolve.
Thanks -
SEM Measure Builder - dataSource values are not appearing in measures
Dear Experts
we recently upgraded our SEM system from 4.0 to 6.0. I am getting few problems in measure builder catelouge entries. when i checked the measures in measure catalouge the datasource tab is blank. Can any one please tell me how do I get the results in datasource tab. Measure values are not appearing in DataSource tab in measure catalouge.
Thanks
PramodYes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.
-
I am trying to import video footage from my sony camera on to imovie. The camera does not appear on the drop down when i connect it to the pc via usb. Anyone any ideas?
I'm using a zr500 via firewire and it doesn't recognize it either. Are you using firewire?
-
Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should. Where can I find them?
You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).
If you can't find them in the "From Internet Explorer" folder then try this:
Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export<br />
Import the HTML file in Firefox 3: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file") -
Lead time values are not appearing in the report for current year.
Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman -
Actions not appearing in Action Drop Down Box
We are in the process of upgrading from 4.0 to 7.0, in 4.0 we have used SAP GUI as the main UI, we are due to go-live with the upgrade very soon and have a problem when creating an opportunity through to a quotation within the SAP GUI Screens, we need this to work for go-live in SAP GUI, we are however after go-live working on the NEW WEB UI
Problem:
We have set up that the Partners are determined from the opp --> Quotaion, these all work fine and transfer as expected. We also have a number of ACTIONS set up that should appear within the ACTION DROP DOWN area of the screen - these are no working in V7.0
For Example:-
Action - 'Email Quotation To Customer'
This action is set up to email lthe customer when triggered, this no longer appears. If I remove the customer and re-add them then it shows and works fine, it is acting as though the Action is not seeing the customer that is brough through from the OPP
The conditions of the action are met, it is set to look for SalesTrans.UserStatus and Partner Detimation - BOTH ARE MET but the system doesn't seem to see the PARTNER
Any help would be appreciated
Regards
BarryThe actions are defiened as follows
Action = 'Email Quotation to Customer'
The action sends an email to the customer (using partner ZQUOPAR (Quotation Partner) which is determined from the Sold-To-Party in the proceding document)
The Action is set to show in the drop down box, the Action does not show even when the Partner is listed
This works fine in V4.0 but not in V7.0
Regards
Barry -
Actual and Commitments values are not Appearing in Internal order report
Hi
We have done budget in KO22 for Internal Order and active the availability controle after that we made PO with the same IO and with account assignment category 'A' and GR also happened.
So when we run the report (S_ALR_87013019 - List: Budget/Actual/Commitments ), system is not showing Actual and Commitments values...
Please help me in this regard...
Thanks,
SaisriHi,
Here we are giving internal order in PO with account assignment category 'A'
In case of Account assignment category 'K' it is showing the Actual values in Report.
Why is it showing Actal /commitment values incase of 'K' ?
Why it is not showing when we select the 'A' category ?
Please provide me answer about my queries...plz
Thanks,
Saisri -
Filter Values are not appearing in WAD
Dear Experts,
In WAD I have been used multiple Data Providers for a Report for the first Tab it is showing the Filter values and when I double click on it, it is showing the results in the report but in the second Tab Strip for another Data Provider I am able to see the Filter Values but when I double click on it, it is not showing the results in the Report.
FYI in BEx these Queries are working fine.
Could any one of you come across this issue if so plz give me the solution.
Thanks and Regards,
Sai Phani.Hi SDBI,
Thanks for your help.
Regards,
Sai Krishna
Edited by: Sai Phani on Mar 5, 2009 9:52 AM
Edited by: Sai Phani on Mar 5, 2009 9:57 AM -
CJ88 - Settlement values are not appearing in CJ88
Hi,
I am not able to see any settlement values when i run CJ88. I have followed below steps.
1. Create Sales Order (TC: VA01)
2. Post Outbound delivery and PGI for the sales order (TC: VL01N)
3. Set the Order (Project) status to REL (TC: CJ20N)
4. Create Rework WBS/Network and Activity element at the project (TC: CJ20N)
5. Post one direct labor cost and rework entry to the order (CN25) (Use Activity type TECHXX for direct labor cost and RWRKXX for rework labor cost)
6. Post overhead (CJ44)
7. Post RA (KKA2)
8. Post Settlement (CJ88)
9. Change the order status from REL to TECO
10. Post RA (KKA2)
11. Post Settlement (CJ88) (Here you should see the costs posted to rework order should get settled to GL account 600724000)
I am stucked at step 8, when i ran CJ88, i am not able to see any values. I have checked allocation structure and it is correct. Please help to resolve issue a.s.a.p.Hi,
After step 5 verify CJI3 report. This is to show actuals against a project. Ensure the costs are posted correctly to the project. Next before OH calculation, do CJ88 for netowork so that it settles the cost to WBS Element. Then run the CJ44. During KKA2 verify the values make sure system calculated the PoC correctly. If everything till here is fine then run CJ88 for the WBS. System should picke up the RA values and post the settlement entries.
PS: all the above assuming RA / Settlement configs are in place.
Regards
Sreekanth -
While in IMovie, having completed a new project and wanting to send to IDVD, I choose the Share icon but the IDVD is not in the choices of the dropdown. I can't find or locate IDVD on my new Macbook pro Please help, anyone
Buy and install an iLife 09 or 11 DVD from a source such as Amazon or eBay.
(99166) -
Tax Levels are not appearing in PO
Dear All,
I am using Taxinn and i am maintained Conditions in FV11 on Plant/Tax Code Level.
While raising PO these values are not appearing.
Regards
ameyHi,
Once you have maintained the tax condition record through FV11, you have to come out of the PO creation transaction and again try to create PO. (Sometimes it is required). As mentioned above, it is necessary to check the date of the condition record should cover the date of creation of purchase order. Also check the condition record you entered is not deleted by somebody.
Also check the company code assignment to tax code as mentioned above reply.
SPRO->Logistic General-> Tax on Goods movements -> India -> Basic Settings -> Maintain Excise duty -> Conditionbased excise determination -> Assign tax codes to company codes.
Thanks,
Harikrishnan.
Edited by: Harikrishnan_sap on Aug 13, 2010 3:52 AM -
I was asked to update my Firefox today. The prompts said the yahoo and norton toolbars would be disabled during the update and ENABLED after. They did not reset and do not appear in view drop down menu. How to I reset the toolbars? I am a novice user please be as simple as possible.
Add-ons are Disabled after Updating Firefox
* https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox
Check and tell if its working. -
SAP EXIT Processing Type not comin in the drop down
Hi,
The SAP Exit Processing type is not appearing in the drop down of the Variable processing types in the Variable wizard while defining the Variable.
Regards,
ViratHi Virat,
SAP Exit processing type is meant for Business Content variables only ( which are provided by SAP), if you want to create a variable & use exit in that, choose Customer Exit option.
hope it helps
regards
VC
Maybe you are looking for
-
Recording Video and Audio at Same time with simultaneous sync
I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that
-
Cannot open indd file in either CS5 or CS5.5
I downloaded CS5.5 on my laptop this afternoon. I then opened a CS5 file, worked on it, then saved. Now I cannot open the file in either CS5 or CS5.5. Is says InDEsign may not support the file format, the file is missing, or it is opened in anaother
-
Problem with App-V 5 in Xenapp 6.5 Feature Pack 2 /PVS Server 7.1 Environment
Hi I hope someone can help me. We are pretty desperate right now. At e customer of mine we are Using App-V 5 SP2 RDS Client together with a Xenapp 6.5 Feature Pack 2 /PVS Server 7.1 Environment. The Golden Image for PVS gets built with SCCM 2007. We
-
Problem! i Have an old account that has been discontinued and my existing apps will not update. Is there a way to using my new hotmail account to update my old apps? How do I change my email so I come update my old apps and new apps with the same pas
-
Help required in using Javanbean in forms
Can any one can write me the easy steps of how to use Javabean in a form. I am using D.S 9i.... Thanks