Infopath support in sharepoint 2013

hi,
I heard that infopath will not be supported with SharePoint in the future is that true ?
in SharePoint 2013 I can use forms library to submit infopath form to collect data ?
Thanks,

Hi,
Per the
Office Blog said below, now we can still use the InfoPath in SharePoint 2013.
The InfoPath 2013 client will be supported through April 2023.
InfoPath Forms Services for SharePoint Server 2013 will be supported until April 2023.
InfoPath Forms Services in Office 365 will be supported until further notice.
To collect data using InfoPath form to SharePoint, you can refer to the article below.
http://office.microsoft.com/en-in/infopath-help/submit-and-save-form-data-HA101783379.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Similar Messages

Cannot view InfoPath Form on SHarePoint 2013 since I removed SkyDrive for Business and installed OneDrive For Business

I removed SkyDrive for Business and installed OneDrive for Business on my laptop. After that, I had problems opening a Word and Excel document in a SharePoint site (SP2013). After installing Service Pack2 from Office2010, this problem is solved.
But I still have the same problem with InfoPath. Whenever I click an InfoPath form (I have InfoPath 2010 on my laptop),...
... I get the error "cannot display web page".
When I change the URL
ms-infopath:ofe|u|http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
into
http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
I can open the InfoPath form and read it.
Any ideas about how to fix this ? I already tried to restore the Office 2010 via Control Panel - Install Programs but without any success...

Hi Gert,
As I understand, you can’t open InfoPath form in SharePoint 2013 unless you change the URL without “ms-infopath:ofe|u|”.
There are some reasons which maybe cause this issue, and you can try to do things below:
Access CA -> General Application Settings -> Configure InfoPath Form Service -> Check the two options in User Browser-enabled Form Templates.
Go into the registry by typing regedit from the Run line and rename the SharePoint.OpenDocuments.5 key (ex. SharePoint.OpenDocuments.5.old) under HKEY_CLASSES_ROOT.
In library settings, click "relink documents to this library".
Here are some similar posts for your reference:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/quot-the-webpage-cannot-be-displayed-quot-when-trying-to-open-edit-an-office-file-from-a-sharepoint-2013-site.aspx
http://www.infopathdev.com/forums/t/28998.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

InfoPath deployment in SharePoint 2013

Hi,
I am new to INFOPATH development
We are trying to deploy code based infopath 2013 thourgh central admin.
It is getting deployed perfectly, but its getting deployed to 14 Hive folder.
How can we deploy it to 15 Hive folder structure ?
I have tried to deploy a sample infopath form. Even that is getting deployed to 14 Hive.
Are we missing anything?

Hi,
Per the
Office Blog said below, now we can still use the InfoPath in SharePoint 2013.
The InfoPath 2013 client will be supported through April 2023.
InfoPath Forms Services for SharePoint Server 2013 will be supported until April 2023.
InfoPath Forms Services in Office 365 will be supported until further notice.
To collect data using InfoPath form to SharePoint, you can refer to the article below.
http://office.microsoft.com/en-in/infopath-help/submit-and-save-form-data-HA101783379.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Requested registry access is not allowed when opening Infopath Forms on Sharepoint 2013

Hello Technet Community.
I hope this will help anybody out there that experienced this problem after patching Sharepoint 2013.
I have a distributed 3-tier Sharepoint 2013 environment. All of a sudden, after the last round of patched released on 7-Jul-2014, opening Infopath forms would throw a "something went wrong" error.
Looking at the ULS logs, you would see the error "Requested registry access is not allowed.".
I have looked at tons of posts on different blogs, and all pointed out that you need to grant "read" permissions to the application pool user (in my case a service account in AD) to the registry key (and subkeys):
HLKM/Software/Office Server/15.0
That indeed works, but it is not the proper way to do it. You should grant "read" permissions to this local group:
WSS_WPG
And special permissions to this local group:
WSS_ADMIN_WPG
Here is a snapshot of the special permissions needed
By the way, the WSS_PWG local group contains the app pool service account.
I do not know why patching Sharepoint removed these permissions from the registry keys, but oh well...
Anyway, Sharepoint is now happy and Infopath forms work as expected.
Claudio

Check if your service account or infopath service account has access to server and specially registry
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx
To solve the issue, please follow these steps:
Use the Process Monitor to monitor the registry, once you get the following ACCESS DENIED message(You can filter the result with “Result contains Access Denied”):
Date & Time:      <date time>
Event Class:        Registry
Operation: RegOpenKey
Result: ACCESS DENIED
Path:     HKLM\SOFTWARE\Microsoft\Office Server\14.0
TID:        2020
Duration:             0.0000297
Desired Access:                Read
Open Registry Editor (Start > Run, type regedit)
Open key: HKLM\SOFTWARE\Microsoft\Office Server\14.0(got from Process Monitor from step 1)
Assign the SharePoint Timer Service account the Read permission to this key
One can open registry using regedit command. In Registery editor go to
HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\15\Secure\FarmAdmin
Check central administration app pool Identity have permission on FarmAdmin. Permission can be check on right clicking FarmAdmin --> Permissions.
If this helped you resolve your issue, please mark it Answered

Server 2012 R2 support in SHarePoint 2013

When 2012 R2 is released will SharePoint 2013 be able to run on it? i've seen there are issues with Preview currently....my server admins would rather build machines in r2 for long term but asked my preference.

I would say the Windows Server 2012 R2 does support SharePoint 2013 installation. It's simply because the R2 is still built on the foundation platform of Windows Server 2012. Microsoft hasn't officially published the compatibility of Windows Server 2012
R2 for SharePoint 2013 though.
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter

Is anonymous access support in sharepoint 2013 bi sites to view dashboards reports without login ??

HI
In SharePoint 2013 :
IS Anonymous access supports for BI sites where dashboards are deployed using Performance point services and SQL SERVER ANALYSIS server?
adil

If you're using an Excel Services data connection, Anonymous is not supported:
https://technet.microsoft.com/en-us/library/ff191193.aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Creating the site content type failed when publish Infopath form to Sharepoint 2013

I have an InfoPath 2013 form trying to publish it to SharePoint 2013. When I click on publishing an error message appears stating "Creating the site content type failed". I can't figure out why this
is happening, any help on this one?
Also it appears the form template is uploaded when I go to the library settings under advance. When I see the .xsn file and click on it, it opens in InfoPath but not in sp.

Rettajm, could you please find any errors in ULS?

Uploading 2010 Infopath Form to Sharepoint 2013

Hello,
I uploaded a Infopath 2010 form from my Sharepoint 2010 website to my new Sharepoint 2013 website.
I get the following editing message under my form title: Last modified at (todays date with time) by admin (Edit this Page)
How can I deactivate this feature or is this a feature? If not what is it and how can I get rid of it ?
Please help,
Kind regards, Ali Tozlu

Hi,
According to your post, my understanding is that you got last modified message when you upload a InfoPath 2010 form.
How did you upload the form from the SharePoint 2010 site to SharePoint 2013 site?
Could you give more information about this issue?
I tried to reproduce the issue with the following three methods, and in the library I not got the last modified message with the form.
1.Use the “Open with Explorer” method.
I opened the SharePoint 2010 site library in explorer which contained the InfoPath 2010 form, and opened the SharePoint 2013 site library in explorer.
Then I dragged the InfoPath 2010 form to the SharePoint 2013 site, the form upload without the last modified message.
2.Upload the form using the URL
In SharePoint 2013 site library, I clicked the “New dcument”->Browser->typed the URL of the SharePoint 2010 site library which contained the InfoPath 2010 form.
The form also upload without the last modified message.
3.Downloaded the InfoPath 2010 form to local computer, then uploaded the form to SharePoint 2013 library, the form upload without the last modified message.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Publishing infopath 2007 to sharepoint 2013

Hi,
Please let me know if we can publish infopth 2007 forms to sharepoint 2013.
Thanks

Hi,
Open the InfoPath file in either Office 2010 or 2013. You will be prompted to update the template so select the InfoPath 2010 / InfoPath 2013 template.
Change the data connections and then publish

Infopath form for sharepoint 2013 lags when searching for person or group.

Dear all,
After implementing a infopath form on sharepoint, the search for person or group column lags when I search for someone the second time. (The first time won't lag). Is there a fix to this? And is there a way to modify the search for person or group function
to sharepoint OOTB person or group search? I think the OOTB one is a lot better. Thanks all.
Timothy Liu

Have a look at this thread which discussed a same question:
http://social.msdn.microsoft.com/forums/sharepoint/en-US/c55f4245-b2b0-410b-94fc-2afd1ef80da8/preventing-users-from-editing-other-users-infopath-forms
thanks,
Flynn

Is Quick View (preview of file contents under search results) supported in SharePoint 2013 Foundation?

We recently deployed SharePoint 2013 Foundation but can't make Quick View (seeing the contents of a file when you hover the mouse cursor over it) work in the search results.
All Site Collection/Site Features are turned on. Not sure what else to do.
Does anyone have this feature working in SharePoint 2013 Foundation?
Thank you!

Hi Charlie,
To view the Preview of the Search Results you need to Install/Configure Office Web Apps Server in your farm.
Please check the below links for reference.
http://technet.microsoft.com/en-us/library/ee855124(v=office.15).aspx
http://technet.microsoft.com/en-in/library/ff431687(v=office.15).aspx
If you think is helpful,Vote As Helpful! And if you see a reply being an answer to the question of the thread, click Mark As Answer.
Mahesh

Migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Infopath forms to SharePoint 2013

Hi,
We have a requirement to migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.
Can somebody please guide us as to what could be the best approach to go ahead?
Thanks in advance.
Regards,
Vijay

Use STSADM
backup and
restore to migrate SharePoint 2007 site
containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.

Configuring infopath forms in SharePoint 2013

The below is the error i am getting when i am tried to publish infopath form to a sharepoint list using WCF
A query to retrieve form data cannot be completed because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file
in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint
Central Administration.
An entry has been added to the Windows event log of the server. Log ID:6932
Correlation ID:a24eb39c-7a50-4022-af09-f4e99b531858

Hi ,
For resolving your issue , you can do as the followings:
Make sure that 'Allow user form templates to use authentication information contained in data connection files' in Central Admin is enabled
Create a Data Connection Library in your site
Convert the Data Connection to .udcx file
Give the path to data connection library
More information:
http://beginnerssharepointtips.blogspot.jp/2013/12/a-query-to-retrieve-form-data-cannot-be.html
Two similar posts for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d5c7480-a122-4210-b9b8-c45f74744446/infopath-2013-forms-on-office365-with-external-rest-datasources?forum=sharepointcustomization
http://social.technet.microsoft.com/Forums/sharepoint/en-US/349cb27f-0e1d-4670-9848-1f00958b12f1/domain-level-security-issue-with-infopath-form
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Latex support in SharePoint 2013 wikipages

Hi,
We have a requirement to support "latex" equation translation to look like a math equation in SharePoint wiki page.
What is the best way to do this using Jquery without any third party libraries?

Most probably you will get better response from Latex forum
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

Infopath support in sharepoint 2013

Similar Messages

Maybe you are looking for