Information about the default setup for the demo user

Hi,
Can anyone guide me the properties which we have to set for the below
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=FOD
db.demoUser.password=fusion
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
And what exactly they represent
Regards,
Krishna

Krishna,
It's pretty obvious...
db.adminUser = the username of a dba user in your database
db.demoUser = the username of the demo user that will get created
db.demoUser.password = the password that will be used for the demo user
db.demoUser.tablespace = the default tablespace for the demo user
db.demoUser.tempTablespace = the default temporary tablespace for the demo user
You don't have to change any of them.
John

Similar Messages

  • Windows cannot load the user's profile but has logged you on with the default profile for the system.

    My Windows 7  crashed a couple days ago after a windows update, I got this message.
    Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    I restarted the machine and got this message
    Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
    DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
    I checked the event Log I found these .
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
     DETAIL - The process cannot access the file because it is being used by another process.
    This is the first error in the event viewer after a successful logon
    The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
     If the event originated on another computer, the display information had to be saved with the event.
    ccSetMgr
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Access is denied.
    Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
    The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    then this one
    The Desktop Window Manager has exited with code (0x40010004)
    Then this before it shutdown.
    The User Profile Service has stopped.
    I started up the PC and the first message I got was
    How can I get access to my user profile? do I need to createa new Administrator account? Please help
    The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

    hi do the following
    1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
    2. If prompted click yes,
    3.  expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
    something similair)
    5. right click the sid and press delete.
    6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
    in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
    i cant remember which one is which but just check both, one will still have all your files and folders in it.
    i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

  • "I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library.  Can't find it.  Thanks

    "I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it."  Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns.  Trouble is, I can't find a Musi Folder or icon in my user library.
    Any help would be appreiated.  OSX 10.9.2  iTunes version 11.1.5  Thanks!!! CW!

    From the iTunes menu bar try View>Show View Options.  Make sure what you want to see is checked and what you don't is unchecked.  You can do this (may need to do this) for any playlists, your main Library, etc.
    Good luck
    srb

  • How do I change the default locations for the iTunes music and iPhone back-up folders?

    My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc.  When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition.  I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice).  Is there a way to change the default folders for the iTunes library and iPhone files?  It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
    Thanks!

    You can't selectively move individual folders withing the iTunes  folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
    Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
    In the resulting dialog, click the Choose Library button.
    Select the iTunes folder you moved to the external hard drive.
    Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

  • How do I change the default language for the spell checker? - solved, sort of...

    As the previous thread was closed without actual resolution - https://support.mozilla.org/en-US/questions/941350?esab=a&s=&r=0&as=s
    I managed to solve this on my end by just reinstalling firefox using the localisation of the default dictionary language i wanted from here - http://www.mozilla.org/en-US/firefox/all/
    A bit of a shame that the main download page doesnt select the geographically relevant localisation for you and even more so that changing the default language for the in built spell checker is so kak. oh well.

    Right-click a web form on any web page.
    Languages > Add Dictionaries
    *Install the Language pack
    You can look here for dictionaries:
    * http://addons.mozilla.org/firefox/language-tools/
    * http://kb.mozillazine.org/Spell_checking
    *http://kb.mozillazine.org/Dictionaries
    *http://support.mozilla.org/kb/Using+the+spell+checker
    Right-click a web form on any web page.
    Languages > Add Dictionaries
    *Install the Language pack

  • How can I change the default program for the external applications editor?

    I have read the on line directions for this and it reads "select a file type in the left pane."   I do not see where this is in the left pane.  All I see in the left pane is "Browser start pages" and a "How do I " Pane.  Nothing with file types.

    Hello,
    Welcome to Adobe Forums.
    In order to change the default program for the external applications editor. Please follow the steps as mentioned below.
    Click on Edit menu then choose preferences.
    Once the preferences dialog box open.
    click on file editors.
    On the Left pane you will find all the file types which you want to edit .
    On the right hand side you will find the editors for that specific file type.
    If you want to add any other application you need to click on + symbol at the top of right pane.
    Select the path of that application which you want to apply.
    clcik on open.
    If you want to make it primay you can click make primary option available at the right hand top. For more detials please check the screenshot below.
    Regards,
    Rajeev

  • Where is the default location for the OC4J logs?

    Where is the default location for the OC4J logs?

    Depends on what variant of the product you are using.
    In an Oracle Applicaiton Server environment (ie the one you install versus unzip) the stdout/stderr streams from OC4J are captured in the $ORACLE_HOME/opmn/logs/<group-instance> directory.
    If you are using standalone then stdout goes to the console where you started the process.
    The logs for the OC4J instance itself are located in $ORACLE_HOME/j2ee/home/log/<instance_group> directory. In this directory you'll see different logs for differet areas of the server. Most of the logs however are captured in the oc4j sub-directory in the log.xml file. Whenever you enable an OC4J component logger in the j2ee-logging.xml file or via ASControl, this is where the logs will end up.
    Take a look at the $ORACLE_HOME/j2ee/home/config/j2ee-logging.xml file -- the log handlers will give you some idea on the different log files that are in use.
    You can configure your application loggers to also direct their log into this file if you wish. See http://buttso.blogspot.com/2007/09/directing-log-messages-into-oc4j.html for an example.

  • Set the default pathname for the application server

    Dear Guru,
    I have encountered an issue in CG3Z and CG3Y
    I am not able to set the default pathname for the application server
    can any one give some guideline how to set the default pathname for the application server.
    Thanks and regards
    Saifur Rahaman

    Hi Saifur,
    There is no such option in CG3Z or CG3Y. If you still want to do it you will have to customize it by copying the program RC1TCG3Z & RC1TCG3Y  to Z & the Function Modules C13Z_FRONT_END_TO_APPL & C13Z_APPL_TO_FRONT_END to Z & also the program LC13ZF01 to Z which runs both of these transactions.
    And finally the data declaration in the program LC13ZF01  as :-
    DATA:      L_FILE_NAME_FTAPPL          LIKE RCGFILETR-FTAPPL value 'you default pathname'
               DATA:      L_FILE_NAME_FTFRONT         LIKE RCGFILETR-FTFRONT value 'you default pathname'.
    Regards
    Abhii

  • What is the default bufferTime for the OSMF player?

    Hi,
    I want to know what is the default buffer time for the OSMF player. And can we set it using NetMocker package using netStream.bufferTime? And when we set it once does it remain that afterwards?
    Regards,
    Amit

    NetMocker is used for unit testing OSMF features that depend on NetStream, it's not something that would be of much use in a production application.
    OSMFPlayer (and OSMF) uses the default values for the buffer for  progressive and RTMP streaming video.  For HTTP streaming video, OSMFPlayer (but not OSMF) uses an adapative algorithm to set the buffer (see HTTPStreamingNetLoaderWithBufferControl). You can set the buffer time via MediaPlayer.bufferTime, and it should retain its value.

  • What are the default values for the NetStream.multicast***** properties

    I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
    I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
    I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
    Sorry for my poor english, Thanks.

    the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream.  in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit.  setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher.  if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4).  this is for safety.  we recommend you always leave push enabled.
    each peer (including the publisher) can change the multicast stream parameters dynamically.  changes are local to that peer.
    for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called.  example:
       var ns:NetStream = new NetStream(netConnection, groupSpecification);
       ns.multicastWindowDuration = 10; // change default for everybody
       ns.publish("mystream");
       ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
    each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick.  overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

  • Anyone know how to change the default font for the new pages? Apparently it does not even come up when I search the 'Help' section of Pages. The level of incompetence in this new version seems breathtaking

    I cannot find how to change the default font in the new Pages. It does not appear in the Help area when I search for it. I am never sing Helvetica for my standard documents and cannot seem to change it. What am I missing? And why does Pages help not have an easy answer?
    dan

    You open a blank template and change the font to you liking. Remember to also get all the styles changed with new font. Then Save As Template. Now you have a template with the font you like.

  • Is there a way to set the default view for the App Store to only show Apps for iPads when the Store is launched?

    I'm a new iPad owner and would like to set the default view for myself to show only Apps for the iPad when I launch the the App Store app. Showing apps for iPhone seems a waste of real estate for me and time spent searching for a particular app since I do not own an iPhone.
    Thanks for any assist. :-)

    Hi ..
    That's not possible as yet but you can provide feedback to Apple here.

  • Is it possible to change the default settings for the slideshow?

    The default settings for any new slideshow use the dreaded Ken Burns effect and some awful background music from a standard library. Having to turn these things off for every new slideshow I start is driving me nuts. Perhaps preferring no music accompaniment and a static photo on the screen is for some people rather boring - but I would prefer it, at least as a starting point. If anyone can help, I'd be very grateful. Thanks
    MacBook Pro   Mac OS X (10.4.8)   iPhoto 6

    Choose "Export" and then the QuickTime option.
    It will make a 4 track video with a simple "fade" effect between photos. You can set the dimensions and the duration of your photos. You can also remove the music or add your own from your iTunes Library (no purchased music if you intend to share these movies).

  • Controlling the default language for new business users

    Hi everyone,
    If this has been answered elsewhere, my apologies for asking again.
    My company is currently in the initial implementation of ByDesign (1405). I just migrated our employees into ByD using the migration tool. This went fine, and also created (inactive) Business Users for each employee.
    One small issue I have, is that for each Business User created, ByD picked a "Default Language" based on the country where the user's organization unit is based (so Dutch for users assigned to an entity in the Netherlands, Danish for users assigned to a unit in Denmark, etc...).
    This despite the fact that the only language we have configured in ByD during scoping is English. In fact, when you edit the default language on the business user record, the drop down only offers English as a choice.
    Since this is our test environment, this is not a big deal, but I would like to prevent this once I migrate user to our production environment.
    So: how do I make sure that the Default Language on each Business User created when creating an Employee is English? (I would rather not have to fix this manually for a large number of users).
    Thanks!
    Eelco

    It applies to selected text. It is part of the text's style.
    So if you want a document to be by default a particular language, make a template in which all the text and all the styles in the styles drawer are set to what you want.
    Peter

  • Were are the default settings for the screen resolution

    ?

    The default resolution for any LCD display is usually it's maximum, which is the resolution at which the display is sharpest (for lower resolutions, an LCD display as to interpolate which results in a slightly fuzzy display). The maximum resolution for the built-in LCD for all models of MacBook (not the MacBook Pro) is 1280 by 800.

Maybe you are looking for