Information Broadcasting - change to query does not show

Hi,
I'm on BW 3.5 and have created a scheduled Information Broadcasting setting for a query, that is emailed. This has been working fine for some weeks.
I have now changed the query, removing two key figures and replacing them with two formulas.
The output from Information Broadcasting does not show the new key figures, nor does it show the old key figures (!). I have maintained the IB setting, edited text in the message and saved it. The text has changed, but not the query content.
So, how does one make Information Broadcasting recognise query changes? Obviously, I could delete the setting and set up a new one, but this is a poor solution - there must be a better way. Or not?
Thanks,
David

Hi Dave
Can you please post the result for this issue or mail me the solution at [email protected]
i am facing the same issue and need to solve this problem asap.........
thanks
prat

Similar Messages

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • Option for changing country/region does not show

    I Use IPad IOS 8.
    I want to change the region from United States to The Netherlands, but there is no option to do this.
    I logged in to Apple Store and chose View Account. The option does not show.
    I Searched the community, but no solution found that helped me.

    I'm confused now as to what you need to do and what's not working. The whole part about using Safari makes no sense, but I could very well be misunderstanding you.
    Whatever your region is set to in the iPad settings should sync to the settings in the iStores ...iTunes, the App Store and the iBooks Stores on the iPad. Try this now. Go to the iTunes app on the iPad, swipe to the bottom of the screen in the featured tab. Tap on your ID and sign out. Then sign back in again and see if you are prompted to change to the store that you want to be in.

  • Changing a Query do not show Results in the PLD Format

    Hello Experts!!
    I have a PLD report,  and I changed the query a BIt 
    let say  the oiginal query is  select 'HELLO' from OINV where DocEntry between 100 and 110
    but then I Changed to +select 'HELLO' + World' from OINV where DocEntry between 100 and 110+
    But The PLD do not reload Data,  there is any way to change this?

    Gordon Thanks for your answer,
    but maybe i didnt explain myself clear.
    let me explain a bit:
    When you create a Query in the Query Manager,   you can create a Print Layout.
    then you can modify in
         Tools>Queries>Query Print Layout
    but that Layout is related to the Query  you just did. 
    but when you change the query the Layout wont change ...
    I think SAP  do not work well with this,  I think that Query Manager shoud have and Update button  and then  go and upate the query in PLD ...  well thats all

  • S_ALR_87012089-Display changes to Vendor:does not show details of change

    Hi Experts,
    S_ALR_87012089 report displays the changes to vendor master. However in ECC 6.0, the same report is not displaying the details of the change ('old' and 'new' ) value, wheras it was in 4.6 C. Now in ECC 6.0 it just says whether 'Created' /'Deleted'...but no details.
    Did some one face this kind of problem? I searched for SAP notes not with much success.
    -Pradeep

    Hi:
    Report S_ALR_87012089.
    Go to the report.give vendor account no
    In further selections
    Select General data,All vendors,Company code data,company code data,company code,purchasing organization,purchasing organization,check boxs,
    Execute the report.
    You will see the all the changes made in vendor master by date,time,vendor,changed by,field name,old value,new value.
    If you need more fields, select the screen layout and select additional fields for your report.
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • Adding New Fields to a BEx Query does not show up in the CR field explorer

    This could be a silly question.
    I have a CR report based on a BEx query.  I had to add a couple of new fields to the BEx query, and when i want to add those fields to the CR report, I don't see them even after I do a refresh in the field explorer. 
    How do i see this new fields in the CR report?
    Help Please
    Thanks

    Hi,
    you can open the report and go to the menu Database > Verify Database.
    that should add the new fields to the list of fields in CR
    Ingo

  • SFW5 (BF) does not show me Check / Activate Changes button in ECC 6 EHP4

    Hello All,
    i am facing a strange problem, i want to activate business Function 'HCM, Core Processes in Talent Management' (BF name 'HCM_TMC_CI_1') in ECC6 EH4 IDES system. I also have SAP enterprise SearchTREX installed and this component shows me dependency in green light in SFW5 tcode (that means all the pre-requisites are fullfilled).
    But in SFW5 tcode does not show me Check / Activate Changes button on the top bar, and if i see in menus its greyed out i am not able to activate the same.
    I tried to unlock client using tcode SE06 and SCC4 but nothign worked out.
    I even checked the authorization of user it has sap_all, SAP_new, IDES_IDA_SUP, IDES_SWITCH, R3_TRUSTED.
    I will appreciate any help on the same.
    We developed system from Homogenious Export Image provided by SAP to us.
    Mani

    Hello Mani,
    You have to check for the compitability and dependency of already activated Enterprise Extension. If an incompatible Extension set is activated than it wont allow other application to work. Please check and let me know if you require anymore information.
    Regards,
    Vinit Pagaria

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

    I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

    "The reply" as in the Rescue email to reset your Security Questions? If so, then you will have to contact iTunes Support directly to get them reset:
    ACCOUNT SECURITY CONTACT NUMBERS
    Cheers,
    GB

  • I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music it no longer goes to icloud an does not show up on my iphone.

    I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • My ipod touch 4g does not show in Windows 7 or itunes.  I've removed and reinstalled itunes, stopped and started apple mobile services and changed out cables.  Ipod is charging when connected.  I've also done a complete rollback to factory defaults.

    My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes.  I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.

    Did you remove and reinstall all the Apple software by:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to see if it helps determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if you have an iPod or computer problem'
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • Changes made in symbol does not show?

    Hi, I recently started working with adjusting a template with flash 8. Everything went smoothly except for one thing. I changed one certain symbol in my libray and when i exported the movie (after changing) i dont see the changes in my website. Other buttons, symbols etc immediatly show there adjustments and this just keeps on remaining the same? Anybody knows what to do with this? Please reply!

    Hi,
    I tried clearing the cache before. No success. The symbols that does not
    seem to change are on the website. I searches the whole library and the
    page i want to change i nowhere to be found (except for the symbols that
    does not show the changes). I hope to hear from you (and anyone) soon!
    2012/2/17 kglad <[email protected]>
       Re: Changes made in symbol does not show?  created by kglad<http://forums.adobe.com/people/kglad>in
    Flash Pro - General - View the full discussion<http://forums.adobe.com/message/4213017#4213017>

  • EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

    Hi guys,
    Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
    this related to Exchange 2010 SP1 known issue. 
    http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
    But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

    Hi,
    Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
    When did this issue begin?
    Please restart the AD topology service to check result.
    Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

Maybe you are looking for