Information for IDOC type TPSDLS01

Hi,
I want to create an IDOC for IDOC type TPSDLS01. The message type for this IDOC is TPSDLS. I need following information, since i am working for last two days and i am unable to figure it out. pls. it is urgent
1). Application , i found it is V2 ( shipping) is it correct?????/
2). Output Type . I found out so many, LD00, LAVA, LD01, TPS0 and many more. Which one is the correct one????????
3). Process Code for message type TPSDLS ( for outbound IDOC).
4). Function module assign to this process code.
Pls . help me as this is very very urgent.
Thanks in advance,
Pratik

Usually the functional guy or the domain expert would be able to guide you regarding the "Output Type".
In case of urgent/swift answers, you might have to approach <a href="OSS">http://service.sap.com</a>
As far as my knowledge goes, in case it is ALE, there is not a requirement of process code for outbound IDocs.
I would request you to purchase a good ALE book. The one which I always carry along is :
ALE,EDI & IDoc Technologies for SAP - Arvind Nagpal, John Pitlak
Hope you find it useful.
Best Regards,
Subramanian V.

Similar Messages

Issue loading Meta Data for IDoc Type WPUKSR01 in XI Integration Repository

Hi,
I want to load the Meta Data for IDoc Type WPUKSR01 in XI Integration Repository out of BI. Unfortunately, this IDoc is not available in the IDoc List. I checked in BI and the IDoc Type is available in WE60 and WE30. Also, I can load the Meta Data for the Idoc in XI ABAP (IDX2).
Can someone tell me why the IDoc doesn't show up in XI Integration Repository Import Object List?
Thanks in advance.
Best Regards.
Alex

Hi Aamir,
The Idoc is released since Release 30A. I also tried to load the IDoc Meta Data from ERP with the same result: it does not show up in the list.
Thanks anyway.
Alex

Inbound function module for IDoc type INFRECMASS01

Hello everybody,
What is the inbound function module for IDoc type INFRECMASS01?
I tried IDOC_INPUT_INFREC (as for IDoc INFREC01), but I got the following message (B1 044): Incorrect function module IDOC_INPUT_INFREC called up
Thanks in advance
Roland

The only difference between INFRECMASS01 and INFREC01 is that repitition of the same segments. However, the standard function module is hardcoded with IDOC type INFREC01, so if you want to use the MASS IDOC copy the standard one and put in the logic to loop around and process the info records one by one.
There is no standard funtion that can process mass idoc of the info record.
Regards,
Ravi
Note: Please mark the helpful answers

FM for idoc type DESADV01

Hi,
Which of the following function module is bet fit for IDOC type DESADV01, message type DESADV and processing code SD05.
IDOC_OUTPUT_DESADT
IDOC_OUTPUT_DESADV01
IDOC_OUTPUT_DELVRY (If I use this one as it doesn't have same segments then how data will be populated)
Question 1 I need to make some changes in the function module as need to fill segment data with custom table.
Question 2 Secondly, need to extend the idoc and I guess for extending the idoc it should have user exits.
Question 3. Please provide the user exit if there is any other than IDOC_OUTPUT_DELVRY.
Regards
Rinku
Message was edited by:
Rinku Malik

Hi,
use the FM -> IDOC_OUTPUT_ORDERS
REGARDS,
Nagaraj

Out Bound Function Module For IDoc Types CODCMT01

Hi Experts,
Can you please tell me the Out Bound Function Module For IDoc Types CODCMT01,CODCAGN01,PRCDOC01.
Thanks..
Debi.

Hi Debi,
You can use FM MASTER_IDOC_DISTRIBUTE to distribute outbound IDoc CODCMT01, CODCAGN01 and PRCDOC01.
Regards,
Ferry Lianto

What is outbound function module for IDoc type INFRECMASS01

Hi,
What is outbound function module for IDoc type INFRECMASS01? This is for purchasing info record.
Thanks
Kamal

Hi Kamal,
Have you looked standard program RBDSEINF or transaction code ME18?
This program will call function module MASTERIDOC_CREATE_REQ_INFREC to generate purchasing info record IDoc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Transaction document for Idoc type

Hi Experts,
I am seeking little information about below Idoc type from POS to SAP IS Retail,
I would like to know that, what are the transaction documents generated in SAP IS Retail after executing of below inbound idoc type.
For example WPUUMS – It will create billing document for aggregate sales and material document for Goods movement.
Similarly, please help me for below Idoc type.
·         WPUBON
·         WPUTAB
·         WPUBWB
·         WPUFIB
·         WPUKSR

Hi Vanrajsinh,
I'd recommend you to go through the help.sap.com POS Inbound Interface for general information;
POS Interface - Inbound @ help.sap.com
and then crawl through related customizing in SPRO: Sales & Distribution > POS Interface > Inbound where you'll find the document types corresponding to individual IDoc types and IMG documentation per activity is also quite 'explicit'.
Not to leave you only with links, more information below but document types generated depend on the above config;
WPUBON - POS interface: Upload sales docs (receipts) non-aggregated;
Usually creates billing document and article document to post sales and goods issue per receipt, billing type and movement types can be defined in SPRO POS as above > Control Sales per receipt
WPUFIB - POS Interface: Upload Financial Accounting Interface SRS/POS
creates only FI posting (accounting documents) for pre-defined POS financial transactions; SPRO POS as above > Transaction Types for Financial Transactions and Trans.Type Cotrol of Fin.Trans.
WPUKSR - POS Upload Cashier Data
Cashier statistics, I've only used it for statistics (RIS, no transaction documents created)
WPUTAB - POS interface: Upload day-end closing POS / Payment List
Creates billing document to post payment per payment type if not already posted via receipts, SPRO POS as above > Payment List Control
WPUUMS - POS interface: Upload sales data (compressed)
as WPUBON but aggregated sales, SPRO POS as above > Aggregated Sales Control
WPUWBW - POS interface: Upload goods movements
Creates article documents to post goods movements
Note that you usually do not use all IDoc types at the same time as this would lead e.g. to posting a single receipt via multiple flows.
Hope this helps!
Regards,
Tomas

Mapping problem for IDOC Type DESADV

Dear all
I need to change Segment E1EDP07 in the message type DESADV.
I should concatenate VBELN and VGPOS into BSTNK.
I tried to do this with BD79 (Rules for Data Converting). This seems not to work as I can get only 1 sender Field.
So I tried to use the userexit EXIT_SAPLBD11_001, but it seems that this is not used. I have set a break-point for debugging and treated the IDOC with RSNAT00 without any stop.
Do you have any ideas how I can do this?
Herbert

>
Herbert Schlup wrote:
> I have 2 entries for my DWSADV01
>
> 1 with FM IDOC_INPUT_DESADV and the other with IDOC_INPUT_DESADV1
With the first one, you cannot do much, as there is no user exit in it. But in the second one, there is a user exit when the idoc data is parsed the exit name is EXIT_SAPLV55K_004 and is called in the subroutine DESADV_IDOC_PARSE in the function.
But please note that the function IDOC_INPUT_DESADV1 is used with process code DELS for message type DESADV and Idoc type DELVRY01 and IDOC_INPUT_DESADV is used with process code DESA and message type DESADV with IDoc type DESADV01. So you might be using IDOC_INPUT_DESADV function and unfortunately there are no user exits to handle your requirement.
My advice would be to check with the source system or the middleware to define the mapping of these fields according to your requirement. But if that is not possible, then you need to first check which message type and IDoc type you are receiving and proceed accordingly
KR,
Advait

Idoc segment for shpmnt notification for idoc type shpmnt02

Hi gurus,
I have to find the idoc segment for shipment notification,idoc type which we are going to use is shpmnt02 or shpmnt01,Can any one of you please tell me the idoc segments for this idoc type with fields and table name?.Thanks in advance.

Hi Nagarathinam
You can use transaction WE60 for documentation on IDOCs
Best regards,
Chris

Multiple customers in Sender Party for IDOC type KU

Hi All,
My scenario is IDOC to HTTP with sender IDOC Type KU.
We are using PO 7.4 and IDOC_AAE.
I have done the following settings.
Created a Sender Party and assigned a customer under party identifiers. (Also I can't add multiple values with same Agency and scheme it throws eror in PI)
For a single customer the end to end scenario is working fine.
But if I try to send the IDOC with other customer Number it fails as the entry is not maintained for that customer in Sender Party identifiers.
Also I can't afford to create a different party for each customer as there are hundreds of customers in the ECC Application system.
I also tried with value mapping but it won't worked.
Please suggest on this.
Regards,
Nitin...

Dear Nitin,
did you solve this problem? A am faced to it right now... ...
Regards,
Markus

Process code or Fmodule for Idoc type PREQCR101 and message type PREQCR1

hi all,
Iam unable to find the process code or function module for the idoc type PREQCR101 and message type PREQCR1 for inbound process.
help from some one would be a lot appretiated.

Hi,
Go to transaction WE57 and you can find the processing FM and message type that are associcated to the IDOC type.
For process code if it is Inbound check WE42 and outbound check WE41 transactions
Regards
Shiva

Multiple message types for IDoc types

Hi,
can we assign multiple message types to IDoc Types?
Is so How to make it
Thanks in Advance....
Regards
Sravya

Hi,
For an IDOC Basic Type is the structure which defines the skeleton of the data transfer like what all fields can be present, how many times a field can appear, is it mandatory etc.
A message type is a label used to identification.
Message type come into picture because we can use the same IDOC basic type for any number of applications. So it becomes necessary that we need some other tag to identify & distinguish between all these. Message Type helps in this cause.
Message type & Basic Type are linked in WE82.

Process codes for Idoc types

Hi All,
Can you please send me the process codes for the following IDOC types as I could not find them in WE64. Also let me know how did you found out.
IDOC types are:
1) INTERNAL_ORDER_CREATE01
2) PROFITCENTER_CREATE01
3) COSTCENTERGROUP_CREATE01
Urgent help is really appreciated.
Regards,
Shahu

Hi,
1) INTERNAL_ORDER_CREATE01
           Please clarify for which order you are using this.
2) PROFITCENTER_CREATE01 -
           PRCM (PRCMAS)
3) COSTCENTERGROUP_CREATE01
           COSM (COSMAS)
Reward points if useful.
Regards,
Atish

Tables or fm to fetch the data for idoc type WMMBID01

hi
i have to create function module in whish i have to fill segments of idoc type
WMMBID01.
is there any fm which can fetch the data for the required fields of segment based on the document no.
or which tables i can use to fetch the required data for goods issued ie transaction migo.
regards
vijay

HI
GOOD
TRY WITH THESE FM
DYNP_VALUES_READ Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
HELP_START Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
RPY_DYNPRO_READ Read dynpro, including screen flow
RPY_TRANSACTION_READ Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
THANKS
MRUTYUN

User,Customer exits or BADI for IDOC Type - CRMXIF_ORDER_SAVE_M01 in CRM

Hi Friends,
We are creating teh EDI Sales order in CRM using below details:
Basic Type - CRMXIF_ORDER_SAVE_M01
Message Type - CRMXIF_ORDER_SAVE_M
Functional Module - IDOC_INPUT_CRMXIF_ORDER_SAVE_M
Direction -Inbound
We need to customize the values for the IDOC,
Can any one help us in providing the details on any Customer Exits , User Exits and /or BADIs for the abov ementioned FM.
We greatly appreciate your early responce.
Thanks
Vijay

Thanks Naresh, it helped...
Can you please help on the below:
1. For outbound Sales order IDoc- CRMXIF_ORDER_SAVE_M01,need BADIs for modification of the IDoc before it gets generated.
2. Need program to generate output as outbound IDoc- CRMXIF_ORDER_SAVE_M01 for sales order conformation/acknowledgement.
3. Need a BADI after the EDI Sales order is saved.
Thanks in advance
Vijay

Information for IDOC type TPSDLS01

Similar Messages

Maybe you are looking for