Information needed on having one more CEN system for the monitored systems

Hi Everyone,
I need some information regarding configuring of one more CEN system
system for the systems which are already being monitored by another
central system.
1) Do I need to register a new CCMS agent on the monitored system for the NEW CEN system again. As I already have sapccm4x registered in the monitored system for the old CEN system, which i think can't be used for the new CEN system.
If I can go with configuring NEW CEN system for the same monitored systems, can you tell me how should I proceed.
Can anyone help me by providing the information for this issue.
Regards,
Bharath Kumar.K

1) yes you can use DSL with what you have, but you want more RAM and I would recommend getting OSX.3 or above because the web browsers for OS9, which I assume is what you are running, are a bit dated and not well supported any longer.
2) Yes you can add more RAM. The 64meg stick in there can be removed. You can add up to 1 Gig of RAM via two 512Mb PC100 or PC133 DIMMS.
See here: http://tinyurl.com/qdlo3
I would add at least 512 Mb if you use OSX and no less than 256 mb if you are using OS9
3) No you can not use CD-R or CDRW with the hardware you have. That iMac only has a CDRom drive and can not burn CDs. You can buy an external CD burner if you want to back up to CDRs
PS: You may want to remove your serial number from your post. Granted the warranty has expired but there's no need or reason to list it.

Similar Messages

Infocube and ODS populated with DATA (need to add one more field?)

Hi,
If infocube and ODS have been populated with data for past 3 months. Then we need to add one more field to this cube. What is the impact? Please advise.
The following is my understanding. Please correct me if I am wrong.
1) Need to delete content of ODS and infocube.
2) insert the new field at ODS and infocube.
3) reload the data into ODS and infocube.
Is there a way that the current data need not be deleted.
Just add in this new field and only subsequent month, infocube will have this new field? Please advise what is the best approach without affecting existing data.

Hi,
Siggi is right. You dont need to delete the previously loaded data to CUBE or ODS. The only catch is that, your new field will be empty as far as history is concerned. But so long as you did map it to the datasource and the datasource is able to fill it up, then your new field will now have value for incoming DELTA Updates.
Addition of a field is not that complicated compared to deletion of a field from CUBE or ODS.
--Jkyle

Credit card number change, your company can not charge , so , what can I do ?because I buy one year plan , but the plan stop already ,I can not change the credit card details.So, I need to buy one more year or can continous the paln with changing the cre

credit card number change, your company can not charge , so , what can I do ?because I buy one year plan ,
but the plan stop already ,I can not change the credit card details.
So, I need to buy one more year or can continous the paln with changing the credit number?

Hello pen pang,
if your Photoshop is a part of Creative Cloud you can use "Manage your membership and payments|Creative Cloud" at
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html >>>
Payment & credit card >>> Help changing the credit card on your account >>> from there see what hints are listed.
On the other hand I'm sure that you can use the recommended procedure with a "normal" PS too.
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
If you need these explanations in another language, please use "Change" at the end/bottom of the website from above
Good luck!
Hans-Günter

Adding one more participant to approve the task in workflows

Hi All,
I'm having a requirement of adding the adding one more workflow user for approving the task. How to add one more workflow user in the human and allow him to approve the task which has been already approved by another workflow user, means it is hierarchical approval.
First the task has been approved by assignee then finally the task has been approved by the approver who has admin rights.
Regards,
CH

Hi,
I have added the users but i need to approve the same task for twice then it is propagating the data to the other end. Is there any hierarchy that we have to
define for the user inside human task.
Everytime I'm approving the request for twice. How to approve the request for only one time.
Regards,
CH

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

How to Create one more SOA-INFRA under the same domain in weblogic server

Hi All,
Can anybody can guide how to create one more soa-infra under the same domain. In order to maintain my composites to be deployed into
different domains, I need to create one more soa-infra and deployed all the composites under that one.
Please let me know if any demo is available for this activity to be gets completed.
Regards,
CH

Hi Vijay,
There are several composites which needs to be deployed and maintained in the server. So, we I'm trying to maintian
by deploying composites into 3 different SOA-INFRA's so if one is not accessible, we can look into it and others can access the
composites from another SOA-INFRA instead of creating domains.
Let me know what will be feasible way to perform this activity.
Regards,
CH

How to create one more server node for SAP J2EE server?

Hi,
Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
Thanks and Regards,
Smriti.

Hai,
Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
Thanks and Regards,

I am interested in buying a macbook laptop. I am confused however in which one I should buy for the type of work that I will be doing. I either am looking into getting a macbook pro or the macbook air. I am leaning more towards the air.

I am interested in buying a macbook laptop. I am confused however in which one I should buy for the type of work that I will be doing. I either am looking into getting a macbook pro or the macbook air. I am leaning more towards the air.

A basic MBA will be more than adequate. Take into consideration that storage may be a long term issue unless you are not averse to traveling with an external HDD.
Ciao.

HI. I HAVE ALREADY MEMEBRSHIP for one app in creative cloud. I want to upgrade it to be complete membership . first I could not cancel my old one . second i pay for the second one, third i could not download the indesign cc ( which i need right now becaus

HI. I HAVE ALREADY MEMEBRSHIP for one app in creative cloud. I want to upgrade it to be complete membership . first I could not cancel my old one . second i pay for the second one, third i could not download the indesign cc ( which i need right now because they ask for serial number) . I have already cs6 products. is that technical problem in adobe or what ?

Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link

I own a Imac and a mac book. do I need to purchase one or two verions of the osx lion?

I own an Imac and a Mac book. Do I need to purchase one of two versions of the OXS lion.

One, you can install it on up to 5 computers under the same Apple ID.

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?

Anyone else having extra long delivery time for the late 2013 macbook pro 15" 2.6ghz 1tb model?
As of today feb 15 i have been waiting for 78 days. Finland doesn't have an official apple store (only authorized resellers) It was my mistake because i should have bought from apple.com. But i think 2.5 months is too long and i have no information about when i can get it..

The low-end 15” rMBP with a 8 GB or RAM and a 256 GB SSD costs $2,000.
The low-end 15” rMBP with a 8 GB or RAM and a 512 GB SSD costs $2,300.
With 16 GB of RAM and a 512 GB SSD it costs $2,500.
The high-end 15” rMBP with a 16 GB of RAM and a 512 GB SSD costs $2,600.
All cost $500 dollars more with a 1 TB SSD.
So the SSD size is not a differentiating factor unless you prefer 256 GB.
If you think you need 16 GB of RAM and a 512 GB SSD then you might as well spend the extra $100 for the high-end model.
The high-end model will make a difference on gaming and graphics-oriented applications.
They tend to run other applications at about the same speed.
Both models are rated with 8 hours of battery life.
Benchmarks on PhotoShop comparing memory sizes: https://discussions.apple.com/thread/5659174?tstart=30
The speed was about 10% different between 8 GB and 16 GB models.
On other applications your mileage may vary.
Application benchmarks:
http://www.macworld.com/article/2059215/15-inch-retina-macbook-pro-review-a-tale -of-two-laptops.html
The low-end and high-end performed the about the same on non-graphics oriented applications.
Graphics oriented benchmarks:
On the Cinebench OpenGL benchmark the high-end was about twice as fast.
On the Unigine Heaven Benchmark benchmark they ran at about the same speed.
On the Unigine Valley Benchmark benchmark the high-end was about 1.5x as fast.
Message was edited by: hands4

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

180 GB of my 639-GB Macintosh hard drive is used. 320 GB of my 498-GB Tie Capsule is used. Only one backup ("now") exists for the Time Capsule, which can no longer backup because of "insufficient space". How come? What is wrong?"

Thank you William for your most helpful response. I shall deal first with your three comments:
Not being tech savvy, I would not have been able to make that call myself but it sure makes sense.
I have updated my profiles as you suggest. Excellent tip.
This guidance is good. Being new to Apple Support Communities, I did not find the field a labeling and guidance to be clear, a point you make. Now I know, I shall do as you say and will use the small slim box as a header to the full message/question, which will place in the larger box below.
Secondly, I come to your question: Did anything change on your Mac recently, such as replacing the disk or main logic board?
The answer is “yes”. Two events have happened both of which concerned the Time Capsule:
The telephone company, with which I have access to the Internet and I have my email account, installed a new modum. After the technician left I had to try and get the Time Capsule and WiFi working again which ended with my having to call Apple for technical assistance. The Apple technician walked me through a number of procedural steps which effectively re-set up the Time Capsule.
Access to the Internet failed and the telephone company reset the modum. I had to call Apple again. This time the technician did not reset the Time Capsule but walked me through a number of steps tha included renaming the “site” (not the Time Capsule).
Another piece of information that may be relevant is that the MacBook Pro uses the Time Capsule for backup. Everything appears to be in order. When I enter the Time Capsule for this laptop I have backups going back for a long time.
Also, I do a weekly backup of the two computers onto another external hard drive using the Time Machine software. So I have another backup of both computers.

'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'

Hello,
Any idea how to fix this problem that casuses this error?
'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'
I have been re-loading LabVIEW 8.0.1 Pro Dev Sytem, NI-DAQ (Traditional) and NI-DAQmx, all day. This probelm seems to be related to the fact that I can, no longer, create executables or open my .lvproj files, yielding the other error:
'' Problem sending commands to the program"
Thank you
Message Edited by FLT CTRL 6 on 06-02-2006 03:41 PM

NI-PAL service Manager has encountered a problem and needs to close.… tell Microsoft...10Jan08
Yesterday I started having this error message pop up when I first boot up my computer. I haven’t even started LabVIEW.
Recent changes:
6Jan08 Replaced motherboard and CPU.
6Jan08 Formatted hard drive and reinstalled software(Windows XP Home Edition). Computer working fine.
8Jan08 Installed LabVIEW 8.0 Student Edition. LV is working fine and the message does not appear.
9Jan08 Download and install NiDAQ 8.6.1. Reboot the system and the above error shows up. LabVIEW works fine so far.
Anybody have any ideas on what the problem is? I have a screen shot of the actual message, but I can't load it on this page.
Oliver
[email protected]

Dynamiclinkmanager has encountered a problem and needs to close. We are sorry for the inconvenience

I get this message when opening Prem. ele 9 trial. "dynamiclinkmanager has encountered a problem and needs to close. We are sorry for the inconvenience."
Prem opens but does not work well. When I load a VOB file it comes in as audio only. Prem. barely works. Any suggestions?
thanks

So which issue do you want to deal with?
With this many problems, it appears that your computer is not set up well to work with this program. I recommend you contact Adobe Tech Support and have them see if they can troubleshoot it. You may need more help than we can give you on this forum. Sorry.
(It might also help to know what operating system you're working on, of course. Macs have a known issue with the dynamiclinkmanager file, as discussed in this thread: http://forums.adobe.com/thread/634929 )

Adobe Captivate has encountered a problem and needs to close. We are sorry for the inconvenience.

I am trying to use Adobe Captivate 5 and I am receiving this message when trying to open the application,
"Adobe® Captivate® has encountered a problem and needs to close. We are sorry for the inconvenience."
Can you explain how this issue can be resolve!?

Hi there,
On which operating system are you using Adobe Captivate?
Please recreate the preferences of Captivate, following is the location of Captivate Preferences:
Windows 7: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 5 folder
Windows XP: C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 5 folder
Mac: /Users/[user name]/Library/Preferences/Adobe Captivate 5 folder
rename Captivate 5 to Captivate 5_old
and then try to launch Captivate 5
Thanks.

Information needed on having one more CEN system for the monitored systems

Similar Messages

Maybe you are looking for