Information: Patches that can Cause problem while Upgrading 10.2.0.4
Hi ALL
The Upgrade checklist and know issue for 10.2.0.4 is now available on Web iv .
Note 464674.1 - Checklist for EM 10g Grid Control 10.2.x to 10.2.0.4 OMS and Repository Upgrades.
This article is a quick checklist to follow when upgrading EM 10g 10.2.x to EM 10gR4 (10.2.0.4) and to report any Known Issues during Oracle Grid Control 10.2.0.4 Upgrade.
Please email me your suggestions/comments to improve it. Going forward this note would be updated as and when more information get in. In case you wish to get something added then please send me the details.
Regards
Akanksha
Hello Akanksha
Thank you for your note.
Unfortunately, it is rather confusing.
You are telling 10.2.0.4 is not supported as a DB for the OMS repository
And then, you describe the procedure to upgrade to this version.
I have a Cst who followed the Release Notes and upgraded its repository to 10.2.0.4.
Now, he can read that it is not supported. He just apply an Oracle doc and now he is no longer supported. That is quite amazing, isn't it ?
What should he do then ?
- Wait for 10.2.0.4 to be supported (as a terminal release, it is rather surprising it cannot be supported) ?
- Downgrade to 10.2.0.3 ?
Would you have some ideas or informations regarding the reasons of this no-support ?
Best regards
Gilles
Similar Messages
-
My husband shares my Apple ID but now I see that this causes problems. So how can he get his own Apple ID for his device?
I agree that having separate Apple IDs is a good idea. It helps keep things from getting confused between two user who might have different needs and wants on their devices.
You husband should save and backup to a computer all the files, photos and music that he wants to keep. He should also save any files created with the apps on his device. Once that is done he can use the Settings app to erase his device.
Settings > General > Reset > Erase all Content and Settings
He can then set up his device as new and create an Apple ID for himself. Once the device is up and running he can purchase and/or download the apps he wants and sync with a computer to restore the photos, files, etc.
To make syncing easier, with two Apple IDs, I suggest that you each use a different computer to sync with OR you have separate accounts on one computer. This way there will be two separate iTunes libraries and syncing with each will be straightforward. -
I am having a problem while upgrading my iTunes to 10.5.
I am having a problem while upgrading my iTunes to 10.5. I've been trying to use the 64-bit installer and have tried disabling my anti-virus software. In the end of the installing process, this error comes up:
Could not open thekey: HKEY_CLASSES_ROOT\Installer\Products\F65865963B6B0EB4ABB0F894B53E0233\SourceLis t\Media
I`ve already tried to change the permissions options in ``regedit``, but when I try to change them , it still complains about not having access to the key, it says ``You do not have permission to view the current permission settings for Media, but you can make permission changes``I click in ``Ok`` and when I tried to change the options, another error comes up:
``Unable to save permission changes on Media. Access is denied.``
Can anybody help?Try drifting up to the SourceList key, mariana. If you are able to change permissions there, try to make the changes described in Marconato's post (except that you're doing it in SourceList rather than Media):
Re: Could not open key: UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.
(If we can't get to the permissions on the key directly, it seems that sometimes going up one level and using the "inherit from parent" setting can get the permissions in.) -
I have Safari on an HP desktop running Windows 7, 64-bit. When I want to clear the history from Safari, the "Reset Top Sites Also" button is always checked. This can cause problems. Any way to have it unchecked all the time?
Welcome to the HP Forums Hinalover,
I see by your post that you are having issues with the print spooler on the Windows 7 computers.
I can help you with this issue.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Try running the Microsoft Fix It Tool to see if it will fix the print spooler.
Diagnose and repair Windows File and Folder Problems automatically.
You can also run the System File Checker to repair corrupted or missing files.
System File Checker: Run sfc /scannow & analyze its logs in Windows 7 | 8.
You might end up having to do a repair of Windows.
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Is there a software patch that can detect temporar...
I have been facing low memory issues and a lot of applications wont work.
Is there a software patch that can detect temporary files and delete them from E72?How large is your "dmgr" folder?? Mine contains 11 folders, but consumes about 2K of space. (Most folders are empty.) I don't know exactly what these directories do (storage space for Java apps?), but wouldn't recommend deleting anything unless you know what program(s) it would affect and are willing to accept it ceasing to run. (If the Java app is something you installed yourself, better to remove and then reinstall it through the OS.)
Are you sure the "dmgr" folders are the biggest problem? You might have a look at this thread: /t5/Eseries-and-Communicators/E72-RM-530-Phone-memory-full-for-no-apparent-reason-any-solution/m-p/1... and install NetQin Mobile Guard http://www.netqin.com/en/guard/symbian/ to aid in the search. Hope that helps! -
I have a 3GS phone that can no longer be upgraded on my Powerbook because it is ancient and the os will only run 10.4.11, consequently iTunes will only upgrade to 9.2.1(4). Please don't answer that i need to upgrade the computer os because that has been a past nightmare i have been through too many times.
Is there any way i can upgrade the phone w/o going to an apple store so hereafter w/ the upgrade to the new os (whenever that gets squared away), i will not need a computer to do it?
Thanks in advance,
donSolved my issue by setting up a new account on my daughter's computer. Not 100% solved, but i was able to get the update on my 3GS.
don -
have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected] -
I had closed out of all of my programs but heard the internal fans running so I checked the activity monitor. It shows syslog d as the top process using the CPU right now. I have no idea what that means.
I read a thread about the startup disk being full and how you can free up memory. I have an airport extreme so TimeCapsule is backing up everything. I do have a bunch of pictures on iPhoto on the laptop; could move those to another location but I'm a little gunshy. I know they are on the TimeCapsule but I would like to save them to a second place before deleting from laptop just to be sure. I went through several things yesterday and emptied trash, etc. I wasn't able to locate the hidden files that the thread about the startup disk being full was referencing --- they were talking about large emails that were causing processes to happen taking up the CPU.... I wasn't able to find out if that was the case for me.
Also I'm going to look into getting another 2MB of memory and installing it on the Macbook, so I can upgrade to the latest OS. Anyone have an idea if that is worth the $$$ over buying a new laptop? Or anyone have ideas as to where to buy memory, etc.
Any ideas - help!Go step by step and test.
1. Start up in Safe Mode.
http://support.apple.com/kb/PH11212
2. Empty Trash.
http://support.apple.com/kb/PH13806
3. Disk space / Time Machine ?/ Local Snapshots
Local backups
http://support.apple.com/kb/ht4878
4. Delete old iOS Devices Backup.
iTunes > Preferences > Devices
Highlight the old Backups , press “Delete Backup” and then “OK”.
http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
5. Re-index Macintosh HD.
This will take a while. Wait until it is finished.
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409 -
Hi all,
i want to upgrade signature on IDS, but IDS is on E3.
i know i have to use IPS-K9-7.0-2-E4.pkg to directly upgrade to E4.
my only concern, is there anything to take care of before doing this. or while doing this upgrade.
because this router is very important and i don't want to lose anything,
can you people share the information so that i can do this without getting into any problem.
and please note platform is IDSM-2
thanx
sh version
Application Partition:
Cisco Intrusion Prevention System, Version 6.2(1)E3
Host:
Realm Keys key1.0
Signature Definition:
Signature Update S479.0 2010-03-19
Virus Update V1.4 2007-03-02
OS Version: 2.4.30-IDS-smp-bigphys
Platform: WS-SVC-IDSM-2
Serial Number: +++++++++
Licensed, expires: 03-May-2011 UTC
Sensor up-time is 103 days.
Using 1407365120 out of 1983508480 bytes of available memory (70% usage)
application-data is using 37.4M out of 166.8M bytes of available disk space (24% usage)
boot is using 39.7M out of 68.6M bytes of available disk space (61% usage)
application-log is using 531.3M out of 2.8G bytes of available disk space (20% u sage)
MainApp E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500 Ru nning
AnalysisEngine E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500 Ru nning
CLI E-2008_OCT_16_16_24 (Release) 2008-10-16T16:40:57-0500
Upgrade History:
* IPS-sig-S467-req-E3 23:25:03 UTC Sun Feb 07 2010
IPS-sig-S479-req-E3.pkg 03:10:04 UTC Thu Jun 03 2010
Maintenance Partition Version 2.1(1)
Recovery Partition Version 1.1 - 6.2(1)E3
Host Certificate Valid from: 27-Jul-2010 to 27-Jul-2012Charanjit --
Before starting any upgrade work, I would suggest ALWAYS reading through the new version's release notes. They will provide any warnings, caveats, or special procedures that might be needed before doing the upgrade. Also, they will list out any basic requirements to use the new software. Release notes for 7.0(4)E4 can be found here:
http://www.cisco.com/en/US/docs/security/ips/7.0/release/notes/22789_01.html#wp1043779
That being said, it looks like you should have no problem upgrading directly to 7.0(4)E4 from your current version. From the link:
"The minimum required version for upgrading to 7.0(4)E4 is 5.1(6)E3 or later"
You shouldn't have to worry about the rest of the router chassis and modules, as the IDSM upgrades and reboots independently from the rest of the system. Just know that the upgrade can take a little while, so be patient while the module reboots and gets started up.
Of course, as with any upgrade, I would make new backups of all configurations and data before installation, just in case something unexpected occurs. -
So, I've been dealing with a problem with my 2013 non-retina MBP. I've already had it into Apple to be looked at, and they replaced the hard drive and RAM. Unfortunately, it is now out of warranty, and the issues have returned. They are two-fold, and hope they are related. One: my computer will freeze up periodically. Sometimes, it will shut down; others, it will make the screen go all wonky, like an old Atari video game. This usually happens when I have been streaming video. It is also sometimes accompanied by the 3 beeps. The second issue is when my computer just shuts down periodically, and I get 3 beeps
So far, I have done all usual matenaince I can think of. I've repaired permissions, uninstalled and reinstalled my RAM (official Apple RAM), run a RAM test, and cleared PRAM, run diagnostics, etc. Usually, my computer runs fine for awhile, perhaps a week, and then I get the same problems all over again. Is there anything I'm not doing, but could be? Anything else to check or try? Is there anything aside from the RAM that might cause this? I know a faulty video card or logic board would cause the screen freezing, but would they also cause the 3 beeps of death? Thanks for any help you can give me.LowLuster wrote:
Yes a bad Logic board. Specifically the RAM slots could be faulty.
Hmm. Makes sense. What's the best way of testing that? Aside from diagnostics, which hasn't pulled up anything. -
Need billing number for a real person that can fix problems
I got Fios a few months ago. A new account was set up for Fios but I'm still being billed for DSL. I've been trying to get the problem fixed for months. The first month they credited back the Fios charge. The second month they said they would send someone out to make changes to transfer my copper line number to Fios but the person never came. I've called several times after that to get the problem fixed. This month they turned off Fios so I paid to have it turned back on in addition to paying my phone and DSL bill. I've been on the phone several times for hours with people that can't do anything to help so they transfer me to others or tell me to call back the next day because their shift is over or the person that can really help me has different hours. If anyone has the phone number to someone that actually fixed a convoluted problem, please message me. I'll go postal if I have to explain my problem to another series of people that can't do a thing to help me.
Solved!
Go to Solution.Hi holeinone,
Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution. -
Maximum length of the Path that can be given while creating a directory
Hi
I would like to know the maximum length of a path that can be given in solaris?
e.g i have to create a directory like this
mkdir /a/b/c..../z ]---> what can be the max length ?
in the same way while reading a path also.
i heard something like getconf PATH_MAX .But i dont know what is this used for.
the value i got when i executed the above command is 1024 ]-->what is this value?
Thanks in advance
Raghu Amilineniraghu_java wrote:
Hi
I would like to know the maximum length of a path that can be given in solaris?What do you mean by "given"? The maximum that you can pass to the OS directly in many cases is PATH_MAX. But you can have files exist that are described by much longer absolute paths.
e.g i have to create a directory like this
mkdir /a/b/c..../z ]---> what can be the max length ?Very long in some sense. But mkdir will probably fail if handed a string longer than PATH_MAX.
in the same way while reading a path also.
i heard something like getconf PATH_MAX .But i dont know what is this used for.
the value i got when i executed the above command is 1024 ]-->what is this value?That is the guaranteed limit for the length of a path that system calls will deal with. But it is possible the absolute path of a file may be larger.
Darren -
Files that can be retrived while playing through a DVD-ROM
I have a client that wants to be able to retrive picture (jpeg) files off of the DVD while running it in a computer. This DVD will also have a video on it and the client wants the main menu to have a button to play the video and a buttom that will link to the picture files. I have never done this before and want to know if someone can give me steps to walk me through it or direct me to someplace that can. Thanks.
PowerBook G4 Mac OS X (10.4.6)Hi - welcome to the discussions.
There are two technologies that will allow you to do this. Native to the Mac (and DVDSP) is DVD@ccess - you can read about that in the manual - it is fairly comprehensively covered. The second involves using a PC and Sonic's 'eDVD' application. This is a far better way of doing things, but is not without its own issues.
Which method you use will depend on your access to a PC, your budget and your overall understanding of DVDs, I guess! -
Problem While Upgrading from ECC 5.0 to ECC 6.0
Hi Experts,
I am doing project on upgrading.
there is one program in ECC 5.0, and it is working fine in ECC 5.0
But while upgrading to ECC 6.0 it is giving syntax error.
below I am sending the code.
BEGIN OF lty_s_ekab_key, "1001282
konnr TYPE ekab-konnr,
ktpnr TYPE ekab-ktpnr,
ebeln TYPE ekab-ebeln,
ebelp TYPE ekab-ebelp,
END OF lty_s_ekab_key.
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
METHODS: constructor,
if_any_table_mm~read_line REDEFINITION,
if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
METHODS prefetch
IMPORTING im_key TYPE lty_s_ekab_key
RETURNING value(re_t_ekab) TYPE lty_t_sorted_ekab.
ENDCLASS.
after checking the systax error , i and getting error like lty_s_ekab_key is unknow.
Plz help me to solve in this issue.
Thanks and Regards
Ganesh ReddyHi
In my ECC 6 the defination is like yours:
CLASS lcl_entity_ekab DEFINITION INHERITING FROM lcl_entity_any.
PUBLIC SECTION.
METHODS: constructor,
if_any_table_mm~read_line REDEFINITION,
if_any_table_mm~read_lines REDEFINITION.
PRIVATE SECTION.
METHODS prefetch
IMPORTING im_key TYPE lty_s_ekab_key
RETURNING value(re_t_ekab) TYPE lty_t_sorted_ekab.
ENDCLASS. "lcl_entity_ekab DEFINITION
So try to re-generate the navigation index
Max -
Upgrade to Netweaver causing problem while opening pdf file in the portal
After an upgrade to Netweaver 4.0, the following code for opening a pdf file constructed from a byte stream passed from an RFC fails.
Document doc = new Document(PageSize.A4);
javax.servlet.http.HttpServletResponse myResponse = request.getServletResponse(true);
myResponse.setHeader("Content-Disposition","attachment;filename=\"AIPDoc.pdf\"");
myResponse.setContentType("application/pdf");
ByteArrayOutputStream baosPdf = new ByteArrayOutputStream();
OutputStream os = myResponse.getOutputStream();
os.write(pdfResult);
PdfWriter.getInstance(doc, os);
It throws a "file not found error" on opening directly. However, if saved and viewed; it opens fine. I believe we need to specify the portal url in the filename but not sure.
Thanks,
DevinaHi Devina,
We are also opening a pdf file constructed from a byte stream passed from an RFC. Our problem is that we are experiencing inconsistent results. The file appears to open on some PC workstations but not on others. When it doesn't work we simply get a blank screen in the window. Did you resolve your issue? If so, perhaps you can provide us with some suggestions for solving our problem.
Thank you,
Angie
Maybe you are looking for
-
Creating multiple reports from one query
Hello Everyone I are designing crystal reports where 1 query is built for 1 report / 1 sub-report. To improve overall efficiency of reports, I am trying to design multiple reports/ subreports from the same query. All the sub-reports belong to the par
-
Internal Order settlement "Acquisition value negative"
Hello, Internal Orders Settlement Process (TRX KO8G) Received the message "Acquisition Value negative in area 01" for I/O # 850100 & 861650 when attempting to run the February 2014 Settlement. What went wrong? How can I resolve this issue?
-
I have managed to delete app world off my phone by accident, due to my touch screen. I have tried many times to re-install the app world back onto my phone but every time the app down loads an "error" message appears and tells me it didn't work I hav
-
I have a mac os 10.4.11 with flash Player Version 10.3.183.75 and can't open Adobe Flash documents. When I try to open a document, it says "A newer version of the software is already installed on this system". How do I install the correct system th
-
How to recover the selection tool?
Acrobat XI. The selection tool (arrow only - not the one that's an arrow with a text-insert cursor next to it) disappeared from the ribbon on my Acrobat. How do I get it back?