Infotype for  Employeeu2019s Work cell and Emergency contact phone?

Hi All,
I am currently working on HR ABAP.
I   want to know the following fields information.
Employeeu2019s Work cell and Emergency contact phone.
in sap from where, we can get the Employeeu2019s Work cell  and Emergency contact phone??  In which infotype   , field and subtype?
What about Emergency contact phone? Note that for Emergency contacts, there can be multiple records with current validity. You need to determine if you should show all of them, or only one. There is no way to know which one is the u201Cprimaryu201D contact.
Regards,
Kishan

Kishan,
This is not a ABAP related question. To give you some hint check IT 0006
Thanks
Bala Duvvuri

Similar Messages

  • I currently have one iTunes account for my personal iPod Touch and for my work iPhone and iPad.  Can I create a separate account for work and keep my current account for my personal use - on the same computers?

    I have an iTunes account for my personal iPod Touch - have had for several years.  When my work provided me with an iPhone and now and iPad 2, they all fall under my personal iTunes account.  Is it possible for me to create a separate account for my work devices and apps, while leaving my personal account intact?  I use both my compter at home and at work to sync occasionally.

    A much simpler solution would be to go into Settings > Store and turn off Automatic Downloads

  • I have a .mac family account, a personal .mac account and separate iTunes id I use for my work iPhone and the associated apps.  How do I keep them separate in the iCloud change?

    I have a .mac family account, a personal .mac account and separate iTunes id I use for my work iPhone and the associated apps.  How do I keep them separate in the iCloud change?

    Welcome to the Apple community.
    Could you tell us a little more about what you want to do. Bear in mind that iTunes has nothing to do with your iCloud account.

  • I would like to forward my phone calls and texts from current number to work cell and discontinue my current plan while still maintaining my cell number

    I have a work cell and would prefer to just have one phone on me, however, I don't want to lose my personal cell number.
    I'm ok with paying $5 or $10 a month. Is this possible? I hear I can do it through google voice as well.

    So, if I understand what you want to do - you want to keep your current, personal cell #, and forward all calls to your work phone.  (I'm not sure if text messages can be forwarded, you may be able to use the desktop Messages app to view and reply to text messages when the phone is not with you.)
    In order to accomplish this, you need to have service on the phone number ... what plan are you on now?  And what phone do you have on your personal Verizon line?

  • Can someone please help i cant connect to itunes from my iphone 4 ,,i had an iphone 3 and when i got my iphone 4 i changed my email address for new itunes account and my old phone which hubby uses

    Can someone please help i cant connect to itunes from my iphone 4 ,,i had an iphone 3 and when i got my iphone 4 i changed my email address for new itunes account and my old phone which hubby uses is changed aswell ..for some reason i cant update my apps off m iphone & in itunes via pc it will say apps are all up to date but i have 25 apps that need updating please can someone help ,, i can download a new app but i cant update existing ones ,,,
    very frustrated iphone user !!

    Changing devices is no reason to create a new Apple ID.
    All content purchased from iTunes is permanently linked to the Apple ID it was purchased with.
    To update apps purchased with the old ID, you MUST sign in with that Apple ID.

  • HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode.  Are there any options available to avoid going through with the recovery.  This seems really lame.

    No.
    You must restore.

  • I recently brought an iPhone 5 from a person and their apple id is still on the phone i for got my passcode and locked the phone up. I factory restored the phone and i still need their id to unlock it. how can i bypass the unlock activation

    i recently brought an iPhone 5 from a person and their apple id is still on the phone i for got my passcode and locked the phone up. I factory restored the phone and i still need their id to unlock it. how can i bypass the unlock activation

    You can't. Until the previous owner removes the activation lock, the device is useless to you; Apple won't remove it unless presented with proof that the registered owner is dead.
    (108990)

  • I have a personal Apple ID for my home pc and iPod, and a work Apple ID for my work laptop and iPhone. Can I get the music from my home pc on my work iPhone?

    I have a home Apple id for my home pc and ipod. Then I had to create a work Apple id on my work laptop for my work iPhone 4s. My question is how can I get my music from my hoe pc onto my new iphone 4s? Thanks in advance

    Time to contact Apple support directly and have them assist you with resetting the password.
    http://www.apple.com/contact/
    B-rock

  • Load cells and non contact strain measurement

    I am designing a bi-axial machine which meant for a fatigue test.
    Could someone recommend me where to get a dynamic load cells and as well non-contact strain measurement?
    Thanks.

    Hi Alvin788,
    Do you presently use any hardware to measure these or are you enquiring as to what hardware/software you will need? Are you planning to use LabVIEW? The following three links talk about measuring Load Cells as well as Strain Gauges 
    Continuous Acquisition from a Smart TEDS Load Cell Sensor
    How do I Configure a Load Cell in MAX?
    Strain Measurement with a Strain Gauge
    This post will also be highly helpful.

  • Oracle EBS drill link targets for EAM Work Order and Asset

    Hi All - I am running Oracle EBS 12.1.3 and OBIEE 11g and I'm trying to link from OBIEE to EBS, but struggling to find the target functions / parameters to provide a direct URL link to EBS EAM Work Order and Asset. I have successfully linked to a Purchase Order View page, I would like to find the similar for EAM Asset and Work Order.
    I can see some parameters in WorkOrderDetailsPGCO but can't seem to work out how to get to the page from a URL.
    For reference MOS Note 555254.1 has some details, but not for EAM.
    Has anyone provided users in any reporting system with a link to EAM Work Order or Asset page and if so how were the links generated?
    Thanks,
    Gareth

    I am giving this a bump as I really need some help with this. Is I run the SQL with TOAD or SQLPlus it seems to consistently runs fine, The problem seems to only be from APEX. I think it has do to with the non-persistent state.

  • For whom work iwlwifi and IEEE 802.11a ?

    Hi,
    I've a big problem with iwl3945 and my 11A-network (I have a router which supports A as well as B/G): It used to work (although not very well), but for about two months now I can't connect anymore, even without encryption. It works with ipw3945, but it fails on OpenBSD (using the same firmware image) as well. I've tried the driver in [testing] as well as the driver in [core].
    The old output was:
    Oct 22 22:01:05 arch64 wlan0: Initial auth_alg=0
    Oct 22 22:01:05 arch64 wlan0: authenticate with AP 00:0e:8e:04:xx:xx
    Oct 22 22:01:06 arch64 wlan0: authenticate with AP 00:0e:8e:04:xx:xx
    Oct 22 22:01:06 arch64 wlan0: RX authentication from 00:0e:8e:04:xx:xx (alg=0 transaction=2 status=0)
    Oct 22 22:01:06 arch64 wlan0: authenticated
    Oct 22 22:01:06 arch64 wlan0: associate with AP 00:0e:8e:04:xx:xx
    Oct 22 22:01:06 arch64 wlan0: RX AssocResp from 00:0e:8e:04:xx:xx (capab=0x11 status=0 aid=1)
    Oct 22 22:01:06 arch64 wlan0: associated
    Now it will fail with a time out, whilst it works fine with any 11G network and all kinds of encryption.
    Nov 18 16:25:44 arch64 wlan0: Initial auth_alg=0
    Nov 18 16:25:44 arch64 wlan0: authenticate with AP 00:0e:8e:04:xx:xx
    Nov 18 16:25:45 arch64 wlan0: authenticate with AP 00:0e:8e:04:xx:xx
    Nov 18 16:25:45 arch64 wlan0: authenticate with AP 00:0e:8e:04:xx:xx
    Nov 18 16:25:45 arch64 wlan0: authentication with AP 00:0e:8e:04:xx:xx timed out
    Now that the kernel .24 is close to the release, I'll be forced to use iwl3945 again. I use it currently with a G-network and it works, but there are more than 14 b/g-networks here, but not a single a-network, so I really would like to use the a-network which offers me a better reception as well.
    Is there anyone who uses the iwlwifi driver successfully with an 11A-network? What's your router model? (I have a Trendnet TEW-511BRP, which is almost the same as the Linksys WRT55AG)
    thanks for reading so far and any help

    I'll repeat the question. I'm unhappy about using 11g, but in contrast to 11a, it works at least. Is there anyone who uses the iwlwifi driver successfully in 11a mode? I don't know if I should blame the microcode (because ipw3945 worked) or my router (because 11a doesn't work with drivers using the microcode).

  • Well I am in my first year in college and am finally looking to get a macbook that I have always wanted. But I dont know what one to get. Ill be using it for school work, music and pictures, searching the web and traveling abroad.

    I have a lot of pictures and i know I am going to be getting an external hardrive. But i am stuck between the 13 in new macbook air and the 15 in retina macbook. battery life is important but i want it to be really fast and just like a powerhorse. I could use all the input I could get. I will be studying abraod to and i want something that will be good to use over there and still be fast. Thanks guys all imput needed!

    Goodness me, a month? That's crazy! I'd say wait it
    out and get your free adapter or battery (though I'm
    bitter I just barely missed the free nano promotion
    too).
    I am expressing interest in getting that free battery, but I really don't need an extra adapter because I still have the original one from my first MacBook.
    Had you mailed your MacBook in for just the random
    shutdown issue? It seems bizarre that it has taken so
    long, because I sent mine in for the same issue and
    it took two weeks total turn around. Also, did they
    give you any reason as to why it will take so long to
    ship out your replacement?
    My MacBook was initially sent in just for the random shutdown issue, but then I called them while it was getting repaired to request the new plastic, since that was becoming a public issue. I think the logic board was replaced by two weeks into the repair, but then it had to wait longer for plastic. When all of that was replaced, it failed the final testing and was going to take longer, but they offered a replacement.
    I think my replacement is taking so long because it is a custom build (so that took about 3 business days) and then estimated shipping is always one week, so since yesterday it has been waiting to be shipped.
    ARGH.

  • Can I use a different Apple ID for Find My IPhone and syncing contacts, calendars, etc?

    I would like to use one Apple ID to sync all of my contacts and calendars, but I need to place the Find My iPhone functionality in a different Apple ID account. Is this possible? Ideally Find My iPhone would be the ONLY feature used by that account, not app sharing, store purchases or anything else.

    To better describe what I am needing:
    1. - iPhone 1
    2. - iPhone 2
    A. - Apple ID #1
    B. - Apple ID #2
    On 1. I need A for purchases and iCloud and B for Find My iPhone.
    On 2. I need A for purchases and B for iCloud and Find My iPhone.
    In addition, will iCloud store text messages?

  • Which mac is really good for hdv working process and render??

    I'll work my hdv native workflow soon and I'm really very interesting on how to get the most of Mac product,s but I'm still asking me what is the minimun of features do I need on a MAc to process without any disturb or overload and render my video in Blu ray for distribution and broadcasting purposes.

    The MacBook Pro provides one key advantage not possible with the 12-inch PB -- the ability to create a second firewire bus using the ExpressCard/34 slot.
    In this manner, you can separate fw drives from camera/deck -- a big issue with FCP5 and certain cameras and hard drives.
    It is a key difference for anyone considering video editing.
    You'll get a beefier video card, and the ability to preview.

  • Infotype for Employee begin date and end date

    Hi Friends,
    Could any one tell me the infotype and fields for getting employee joining date and end date.
    Regards,
    Susmita.

    Infotype 41 (Date Specifications) should have all dates.
    Infotype 2...i.e. PA0002 BEGDA & ENDDA may not have actual start and end date depending on how your company maintains it.
    In Infotype 41 (table PA0041)...get either BEGDA & ENDDA or get correct date based on qualifier DAR01-DAR12.
    Thanks,
    Pushpinder Randhawa

Maybe you are looking for

  • 2 monitors on a 2008 macbook

    I have early 2008 macbook and currently have 1 monitor connected via a mini dvi to hdmi adapter, is there a way in which I can connect another monitor to my macbook?

  • Arithmetic operations using Picklist field values

    Hi, I tried to multiply a picklist field value as below and wanted to store the result in a field (datatype = Integer or Number) using a workflow which triggers based on the Trigger Event "Before modified record saved". Criticality = [<plFrequency_of

  • ConcurrentSkipListMap concurrency question

    I am not much familiar with the internals of that class... Is it thread-safe to add entries to that map and in another thread to clone the map ? What about the ConcurrentHashMap ? Thanks.

  • Align Components how a panel Form Layout

    hi, I have the panel form layout with components, fine perfect, but... when I want to put a LOV such an output the text the center together the alignment of the components is lost i have the picture :) http://img100.imageshack.us/img100/7164/perfecto

  • Vision V Plus: Video conversion/compress

    I've grabbed the latest version of the Creative Video Converter... but converting a 350MB AVI gives me a 700MB AVI (which kind of defeats the purpose of all the cool compression tools around). I've poked around with SUPER a bit, but I have no idea wh