Initial Print jobs 'communication error with device'. Pause and restart job

So, I have an odd variant of the Leopard print problem; on 3 separate systems.
When I print to an HP Photosmart C7180, which setup fine, which I can scan to fine, the print job throws an error :error communicating with device, switch on and off' and so forth. It does that from any app, and consistently. I am printing via bonjour, the printer is networked, but on a static IP.
To fix this EVERY-TIME I PAUSE printer, then start printer again. It immediately starts working, consistently until I sleep, log out, or don't print for a while.
This seems to be some timeout issue or such. I tried IP printing, but no difference.
Resetting the print system also did not help.
It's not catastrophic but sooo annoying. Any input appreciated!
Thx,
Dan

Hello SunnygirlQ. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Extreme and AirPort Express
I assume that this printer works just fine when it is connected directly to your Mac ... correct? If so, has it worked when connected to the AX in the past ... or has it always had this problem? If it did work correctly before, did you do any updates, especially to the AX, recently?

Similar Messages

Itunes communication error with device

Didn't happen for a while until sometime about 2weeks ago and before 8.1, my iTunes just updated recently will not except my iPod and says cannot not read the contents and there's something wrong communicating to it and the OS is not installed correctly and ask me to restore, I am not doing not since idk yet how to backup to iCloud since iOS 8 internally without iTunes backing up. and another msg saying to reinstall iTunes to install the os on the device.
Other than I can still access my stuff through third party software and access my photo's and it does charge even thou my cord is old and needs to be replaced since my cord is really wear and tearing clod to the middle. (the outside cord tearing down to see the inside like all apple cords do since they are so weak from the protection on each ends)
I just updated about an hr ago from 8.0.0 to 8.1 and still does the same.
this whole time while on 8.0.0 safari less crashed than it did so many times when i got a new one (7.1.2) from china to replace my old one on 7.0.0 due to my flash not working.
But even if my cord needs to be replace, my cord still connected and charge but the new iTunes asking me to restore the firmware even thou an hr ago i just updated to 8.1? any ideas?

............bump!

Transferring photos from my Nikon coolpix s7c to my mac causes a "communications error" with the camera and will not transfer photos as it has done in the past. Seems to have stopped working with my Mac Lion upgrade?

iphoto has stopped transferring my photos from my Nikno coolpix s7c camera. Seems like it stopped when I upgraded to Lion? It continues to work with a PC?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

A communication error with disc drive

A communication error with disc drive and burn folder on macbook will not let me burn discs. Is this a program error kind of thing or just parts problems?
White Macbook using OS 10.6.8

There is a chance that the optical drive &/or its cable have failed
so a replacement, perhaps in the form of a third-party quality drive
may be in order. The Apple USB Superdrive does not directly work
with older computers that have internal optical drives; but there are
good ones by other makers, owners of older MacBook portables use.
{There may also be a Console error message failure-related code.}
Or see about the ifixit guide to repair that model MacBook & a
replacement part from OWC, to survey efforts & costs to DIY.
Good luck & happy computing!

Communication error with the opmn server local port

Working on 64-bit R12.0.6 on AIX 5L
Application services are not being started properly. They are being started with status 2(sometimes with 4).
Autocinfig is being successfully completed.
Please help me how I can get rid of this error. Following are some of the environment setting details:
ons.conf
nodes=appaix02.us.oracle.com:15007
opmn.xml
<opmn xmlns="http://www.oracle.com/ias-instance">
<notification-server>
<port local="15006" remote="15007" request="15005"/>
opmn.log
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
ons.log
07/01/11 13:12:02 [4] ONS server initiated
07/01/11 13:12:52 [4] Logging disabled
07/01/11 13:12:53 [4] ONS server initiated
07/01/11 13:13:04 [4] Logging disabled
07/01/11 13:13:04 [4] ONS server initiated
07/01/11 13:13:17 [4] Logging disabled
07/01/11 13:13:28 [4] ONS server initiated
07/01/11 13:13:40 [4] Logging disabled
07/01/11 13:13:41 [4] ONS server initiated
07/01/11 13:14:20 [4] Logging disabled
07/01/11 13:14:21 [4] ONS server initiated
07/01/11 13:14:29 [4] Logging disabled
07/01/11 13:14:29 [4] ONS server initiated
07/01/11 13:14:34 [4] Logging disabled
07/01/11 13:14:34 [4] ONS server initiated
07/01/11 13:15:53 [4] Logging disabled
adopmnctl.txt
10/08/10-23:30:43 :: adopmnctl.sh version 120.4.12000000.3
10/08/10-23:30:43 :: adopmnctl.sh: Stopping Oracle Process Manager (OPMN) and t
he managed processes
opmnctl: stopping opmn and all managed processes...
10/09/10-11:13:41 :: adopmnctl.sh version 120.4.12000000.3
10/09/10-11:13:41 :: adopmnctl.sh: Starting Oracle Process Manager (OPMN)
opmnctl: opmn start failed.
10/09/10-11:15:09 :: adopmnctl.sh: exiting with status 2
adformsctl.txt
opmnctl: stopping opmn managed processes...
10/09/10-11:18:11 :: adformsctl.sh version 120.12.12000000.5
10/09/10-11:18:11 :: adformsctl.sh: starting OPMN if it is not running
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
Communication error with the OPMN server local port.
Check the OPMN log files
opmnctl: opmn start failed.
Please help.

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

Communication error with Epson Stylus C63 with Airport Express

I have a brandnew iMac running 10.5.2. Set up my Airport Express and got the wifi to work in the house. Now I am dealing with remote printing. Printer is plugged into the port on the Airport Express, I see it in the Printer tab of Aiport Utility, I see it in the printer dialogue... but whenever I print I get "communication error with printer". I have unplugged the Airport Express, restarted computers, to no avail.
What am I missing?? Thanks in advance for any tips.
-Joanna

I solved this problem! After lots of searching I ended up at http://discussions.apple.com/thread.jspa?messageID=5692363 Printer setup utility in Leopard which gave the tip to reset the printing system... I did, and then somehow the Epson printer showed up as a Bonjour printer (which I had tried to do in the Airport utility but it would not let me because the name was too short or something strange like that). PageSender Fax showed up also and I just printed a document remotely...
Hope this helps someone else.

Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK

Hello,
We use timesheet (CATS) in a separate SAP system from the SAP system in which HR resides.
I found out how the loosely coupled scenario with CATS works with a SAP HR system. We transfer the workschedule and absence data with report RPTIMEOVERVIEW_REPLICATE to the SAP system in which CATS is used. This data is then available in the PTIMEOV1 table to perform time checks in CATS. The distribution model for ALE takes care of the fact that the data is posted into table PTIMEOV1. With BD97 I set up that the BAPI: PTMGREXTATTABS.CHECK has RFCdestination for synchronous calls = LOCAL_EXEC.
When I want to record on an attendance code without clock times then the above works fine. The SAP system in which CATS resides looks into table PTIMEOV1. So far so good.
However, when I want to record hours WITH clock times then I cannot save the data. The error message HRTIM00CATS667 shows up:
"Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK is no t available system"
Diagnosis
An error has occured during communication with the HR System. The HR data in the time sheet cannot be validated.
From the error message description it seems that it wants to check the SAP HR system instead of looking for the check in the SAP system in which CATS resides.....
When I change the value from LOCAL_EXEC to the system in which HR resides then the error disappears, but then it really checks into the SAP HR system (synchronous check with that SAP HR system) and that is not what the customer wants. The check should be local on the PTIMEOV1 table (in case the SAP HR system is down).
I did not find any OSS notes on the topic....or other info on SDN.
Can anyone help me out concerning this starnge error message, at least for me?
Thanks very much in advance,
Kind regards,
Mirko

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

I have a communication error between Lightroom 5 and my printer. It prints photos about 1/2 strength in color. Printer checks out ok. WHAT CAN I DO?

I have a communication error between Lightroom 5 and my printer. It prints photos about 1/2 strength in color.. The printer checks out ok. What can I do?

CF11 is crashing ( application pool suffered a fatal communication error with the Windows Process Activation Service)

I have a cluster of 2 IIS web servers on Windows Server 2008 R2. They had been running on CF10 for over a year (if not two) with no problems. I upgraded one server to CF11 and now that server is crashing while the CF10 servers is still running fine.
In the Windows event log I'm seeing 4 instances of this error:
"A process serving application pool '******' suffered a fatal communication error with the Windows Process Activation Service. The process id was '4652'. The data field contains the error number."
Then finally:
"Application pool '******' is being automatically disabled due to a series of failures in the process(es) serving that application pool.".
Looking at the application pool in the IIS admin it is stopped. Restarting will resolve but it will eventually crash.
What could be the issue?
-Phil

I'm seeing in the CF logs leading up to the crash:
Jun 04, 2014 11:11:31 AM org.apache.coyote.ajp.AjpProcessor getRealPathFromServer
SEVERE: Error in getRealPathFromConn
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(Unknown Source)
at java.net.SocketOutputStream.write(Unknown Source)
at org.apache.coyote.ajp.AjpProcessor.getRealPathFromServer(AjpProcessor.java:402)
at org.apache.coyote.ajp.AbstractAjpProcessor.getRealPath(AbstractAjpProcessor.java:1276)
at org.apache.naming.resources.FileDirContext.doGetRealPath(FileDirContext.java:202)
at org.apache.naming.resources.BaseDirContext.getRealPath(BaseDirContext.java:424)
at org.apache.catalina.core.StandardContext.getRealPath(StandardContext.java:4660)
at org.apache.catalina.core.ApplicationContext.getRealPath(ApplicationContext.java:432)
at org.apache.catalina.core.ApplicationContextFacade.getRealPath(ApplicationContextFacade.ja va:333)
at coldfusion.runtime.ServletContextWrapper.doGetRealPath(ServletContextWrapper.java:184)
at coldfusion.runtime.ServletContextWrapper._doGetRealPath(ServletContextWrapper.java:116)
at coldfusion.runtime.ServletContextWrapper.getRealPath(ServletContextWrapper.java:98)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:999)
at coldfusion.filter.FusionContext.getRealPath(FusionContext.java:937)
at coldfusion.runtime.RuntimeServiceImpl.resolveTemplatePath(RuntimeServiceImpl.java:866)
at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:420)
at cfApplication2ecfc1835967654.runPage(C:\Data\http\domain\apps\Application.cfc:3)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:246)
at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47)
at coldfusion.runtime.TemplateProxyFactory.resolveComponentHelper(TemplateProxyFactory.java: 538)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:248)
at coldfusion.runtime.TemplateProxyFactory.resolveName(TemplateProxyFactory.java:159)
at coldfusion.runtime.TemplateProxyFactory.resolveFile(TemplateProxyFactory.java:120)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:138)
at coldfusion.cfc.CFCProxy.<init>(CFCProxy.java:84)
at coldfusion.runtime.AppEventInvoker.<init>(AppEventInvoker.java:64)
at coldfusion.filter.PathFilter.resolveApplicationScope(PathFilter.java:195)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:124)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:58)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62)
at coldfusion.CfmServlet.service(CfmServlet.java:219)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:241)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at sun.reflect.GeneratedMethodAccessor118.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:97)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doNext(FusionReactorR equestHandler.java:472)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doHttpServletRequest( FusionReactorRequestHandler.java:312)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.doFusionRequest(Fusio nReactorRequestHandler.java:192)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorRequestHandler.handle(FusionReactorR equestHandler.java:507)
at com.intergral.fusionreactor.j2ee.filter.FusionReactorCoreFilter.doFilter(FusionReactorCor eFilter.java:36)
at sun.reflect.GeneratedMethodAccessor117.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.j2ee.filterchain.WrappedFilterChain.doFilter(WrappedFilterCha in.java:79)
at sun.reflect.GeneratedMethodAccessor116.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.intergral.fusionreactor.agent.filter.FusionReactorStaticFilter.doFilter(FusionReactor StaticFilter.java:53)
at com.intergral.fusionreactor.agent.pointcuts.NewFilterChainPointCut$1.invoke(NewFilterChai nPointCut.java:41)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:422)
at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:198)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:607)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:313)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Sharepoint application pool suffered a fatal communication error with the Windows Process Activation Service

I am using form based Sharepoint servers and received below error. Is there any way to solve this?
Sharepoint 2010 in Windows 2008 R2 Server.
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '11516'. The data field contains the error number.

I don't see any number provided in the event log. I got this through Sharepoint diagnostic tool. below is the log.
Log Name: System
Source: Microsoft-Windows-WAS
Date: 12/17/2013 5:16:34 AM
Event ID: 5011
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: 525531-WEB03.dfw.intensive.int
Description:
A process serving application pool 'Sharepoint-2' suffered a fatal communication error with the Windows Process Activation Service. The process id was '8180'. The data field contains the error number.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WAS" Guid="{524B5D04-133C-4A62-8362-64E8EDB9CE40}" EventSourceName="WAS" />
<EventID Qualifiers="32768">5011</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-17T10:16:34.000000000Z" />
<EventRecordID>23515</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>525531-WEB03.dfw.intensive.int</Computer>
<Security />
</System>
<EventData>
<Data Name="AppPoolID">Sharepoint-2</Data>
<Data Name="ProcessID">8180</Data>
<Binary>6D000780</Binary>
</EventData>
</Event>

Communication error with external system ( VERTEX )

Hi Folks,
While creation the Credit memo request or Sales order /invoice system giving the error message " COmmunication error with external system ( VERTEX ) " and stopping to proceed further and even not able to post the accounting document.
Please help me out here.
Answers will be appreciated and rewared.
Regards,
Ram.

Hi,
check this below thread
Communication error with the external tax system (VERTEX_MS0018)
OR
Remove V from the Extrernal System at the location IMG->financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Basic Settings->External Tax Calculation->Activate External Tax Calculation
Reg,
JJ
Edited by: Jagsap on Mar 5, 2010 1:15 PM

Getting Communication error with the external tax system(VERTEX_MS0018)

Hi All,
I am a new SAP HCM self learner. I am practicing it on company's sandbox system. When I am trying to create a company and saving the address, it is returning Communication error with the external tax system(VERTEX_MS0018). I have already tried to solve is issue by going thru previous related to same issue like
Communication error with the external tax system (VERTEX_MS0018) ...Urgent
but coudn't solve the issue.
Please help. Is this issue coming as I am using a training environment? any alternate approach?

Hi Ravi,
To disable the connection to Vertex:
Goto tcode SPRO > Cross Application Components > Transaction Tax Engine >
Technical Settings> Define External Tax System
Here an RFC would be defined. Remove it and try again.
Also in SPRO > Cross Application Components > Tax Determination based on Jurisdiction Codes > External Tax Jurisdiction > Activate External Tax Jurisdiction.
Remove the entry 'V' here.
Regards,
Srikishan

COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018

When I copied US company code 3000 to my org using USD as currency code with a a view to simulate US scenarios it threw an error as under.
The error occurred when I was trying to fill in the address tab after copying the company code.
<b>
COMMUNICATION ERROR WITH EXTERNAL TAXATION SYSTEM - VERTEX_MS0018</b>.
Thank you and regards,
Ram

Hi Ram Shiva,
Deactivate External tax
Path:SPRO>Financial Accounting>Financial Accounting Global Settings>Tax on Sales/Purchases>Basic Settings>External Tax Calculation>Activate External Tax Calculation
Hope this will solve
Best Regards
Ashish Jain

Communication error with the external tax system(vertex_ms0018)

Hi All
I have installed ECC6 IDES S/W on my PC. I have activated SAP Insurance module (FS-CD). When I try to create business partner using FPP1 with US address, It is throwing error as follows:
"communication error with the external tax system(vertex_ms0018)"
I dont want to use any external Tax system like Vertex etc. because I am not calculating any taxes.
I gave correct US address with valid ZIP etc. but no use.
Please help me if any one of you has idea. How to overcome this error. How to deactivate connection to external tax system.
Your help will be greatly appreciated.
Thanks
Giri

Hi Giri,
I've notice that you took the 'V' from the configuration but you left the RFC destination.
Clearly the RFC destination is not working thus the reason you get the error (in your case, your server can't determine a valid IP address for the host iwdf8334.wdf.sap.corp).
To sort out the problem you got I can think of at least two ways:
1. Get the RFC connection working (get the correct setup for it) using transaction SM59
2. Or if you don't really need the external tax calculations, remove the RFC configuration from TAXUJ under Assign RFC Destination to Country on the Cross-Application SPRO entry.
3. You can always add TAXUS to transaction OBBG if you require it (as it comes out of the box).
This should fix the problem you are having but I'm assuming you don't need the external tax calculations.
If you do, just fix the connection using SM59 (you may want to ask for help from your Basis team if you don't know how to do it).
Cheers
Jorge Laranjo
[email protected]
+44 741 847 5946

Communication Error with PIC µC through RS232.

Hello Friends.
I am getting continuous communication error with PIC µC reading through RS 232. Our µC programmed by external company and according to Communication protocol. µC sends 11 data packets in 43 ms and then delay on 50 sec. Actually Original labview code is developed in LabView 7.0 and now I am trying to update new installer to LabVIEW 9.0. I am attaching my LabView communication VI and capture data. If you see in the ComSerial.Vi, you can find when 8000! case is detected only that time 3 value sent to µc. In µc there is a Protocol, that when it receive 3 wrong packet (or damage packet) out of 10 then it send Error code 07 means communication error. Can you please take a look in to this ComSerial.vi and suggest me some Solution. I already spend more then 10 days to just figure it out.
TejasKumar patel
Attachments:
COMserial 1.2.vi ‏56 KB
Test1.txt ‏4888 KB

I would suggest to start with the examples for the serial communication with LabVIEW and then built on them further. This way you will be sure about your code and then also for your communication and afterwards you can implement the further logic. Try those vis and see if your recieving the right data or not if not may be there is problem on hardware side!!
Naqqash

Initial Print jobs 'communication error with device'. Pause and restart job

Similar Messages

Maybe you are looking for