Initialize Tape error using DB13
Hello everyone,
I'm just a beginner in SAP as Basis Administrator. I'm trying to simulate the Online Backup using the BRTOOLS, wherein you manually set the volume_group for tape, the initialize tape and backup is successful. When i used db13 doing the initialize tape, it was tagged as SCRATCH that makes my backup failed.
I want to know, why and how will the initialization of tape using DB13 be a success? Why it was tagged as SCRATCH? I want to make this work so i can schedule online backup to our PROD server.
Thanks and regards,
Gelyne
Hi,
go to init<SID>.sap and check this parameter are set or not
volume_backup = (SIDB01, SIDB02, SIDB03, SIDB04, SIDB05.........)
volume_archive = (SIDA01, SIDA02, SIDA03, SIDA04, SIDA05..........)
if not check with you hardware vendor and ask for tape lebel name
because system is not get tape lebel in init<SID>.sap file that why it is searching
for SCRACH tape label and failing with error
Similar Messages
-
In DB-13 Initialize tape error
Hi
while initialize tape in db-13, it gave error like
ob started
tep 001 started (program RSDBAJOB, variant &0000000000119, user ID BASIS)
xecute logical command BRBACKUP On host CRMDEV
arameters: -u / -i force -c force -n 1 -v SCRATCH
R051I BRBACKUP 6.20 (100)
R055I Start of database backup: bdvozytd.tib 2007-06-29 15.10.09
R252E Function fflush() failed for '/oracle/CRD/sapbackup/bdvozytd.tib' at location main-9
R253E errno 28: No space left on device
R121E Processing log file /oracle/CRD/sapbackup/bdvozytd.tib failed
R206I End of backup volume initialization
R280I Time stamp 2007-06-29 15.10.09
R054I BRBACKUP terminated with errors
R252W Function fclose() failed for '/oracle/CRD/sapbackup/bdvozytd.tib' at location BrCleanup-14
R253W errno 28: No space left on device
R121W Processing log file /oracle/CRD/sapbackup/bdvozytd.tib failed
xternal program terminated with exit code 3
RBACKUP returned error status E
ob finished
Please let me know what i need to do.
Regards,
swathi-kHi Swathi
This is clearly a space problem. There is not enough free space left to perform the backup..
So you need to make sure that there is enough space available for backup...
This part of error:
R252E Function fflush() failed for '/oracle/CRD/sapbackup/bdvozytd.tib' at location main-9
<b>R253E errno 28: No space left on device</b>
R121E Processing log file /oracle/CRD/sapbackup/bdvozytd.tib failed
clearly states that the issue is related to space on the device..
So clean up the space and try taking the backup again and it will be surely a success!
No need for media recovery.
Regards
Sumit
[reward witrh points if the answer is useful]
Message was edited by:
Sumit Jain -
Dear All,
When we are initializing the tape or taking the backup in first
attempt, the following errors hav occured :
25.12.2007 18:36:49 Job started
25.12.2007 18:36:49 Step 001 started (program RSDBAJOB, variant
&0000000002466, user ID JITENDRA)
25.12.2007 18:36:50 No application server found on database host -
rsh/gateway will be used
25.12.2007 18:36:50 Execute logical command BRBACKUP On host bsldb-lh
25.12.2007 18:36:50 Parameters:-u / -jid ALLOG20071225183649 -c force -
t online -m all -p initPRD.sap -v SCRATCH -a -c force -p ini
25.12.2007 18:36:50 tPRD.sap -cds
25.12.2007 18:36:51 BR0051I BRBACKUP 7.00 (30)
25.12.2007 18:36:51 BR0152E Environment variable ORACLE_SID is not set
25.12.2007 18:36:51
25.12.2007 18:36:51 BR0056I End of database backup: bdwwwpey.log 2007-
12-25 18.36.52
25.12.2007 18:36:51 BR0280I BRBACKUP time stamp: 2007-12-25 18.36.52
25.12.2007 18:36:51 BR0054I BRBACKUP terminated with errors
25.12.2007 18:36:51 External program terminated with exit code 3
25.12.2007 18:36:51 BRBACKUP returned error status E
25.12.2007 18:36:51 Job finished
and the same time in second attempt, there is no any error even we are able to take backup and initialize the tape successfully.
Why it is giving error in first attempt ??? Any clues ??
Regards & Thanks,
AnkitaNo password has been cahnged and it is for all the jobs we can schedule from DB13 like check db, optimizer stats, online backup , verify database etc. that they fail on first attemt and on second ist Successful i wonder wats the problem. its happening in only thsi Production Node. As its in clustering the other node is working fine.
any suggestions....
Regards,
Ankita -
Dear All,
When we are initializing the tape or taking the backup in first
attempt, the following errors hav occured :
25.12.2007 18:36:49 Job started
25.12.2007 18:36:49 Step 001 started (program RSDBAJOB, variant
&0000000002466, user ID JITENDRA)
25.12.2007 18:36:50 No application server found on database host -
rsh/gateway will be used
25.12.2007 18:36:50 Execute logical command BRBACKUP On host bsldb-lh
25.12.2007 18:36:50 Parameters:-u / -jid ALLOG20071225183649 -c force -
t online -m all -p initPRD.sap -v SCRATCH -a -c force -p ini
25.12.2007 18:36:50 tPRD.sap -cds
25.12.2007 18:36:51 BR0051I BRBACKUP 7.00 (30)
25.12.2007 18:36:51 BR0152E Environment variable ORACLE_SID is not set
25.12.2007 18:36:51
25.12.2007 18:36:51 BR0056I End of database backup: bdwwwpey.log 2007-
12-25 18.36.52
25.12.2007 18:36:51 BR0280I BRBACKUP time stamp: 2007-12-25 18.36.52
25.12.2007 18:36:51 BR0054I BRBACKUP terminated with errors
25.12.2007 18:36:51 External program terminated with exit code 3
25.12.2007 18:36:51 BRBACKUP returned error status E
25.12.2007 18:36:51 Job finished
and the same time in second attempt, there is no any error even we are able to take backup and initialize the tape successfully.
Why it is giving error in first attempt ??? Any clues ??
Regards & Thanks,
AnkitaHello,
this is the SQL Server forum. We can't use BRBACKUP. If you have a Oracle database you might get better answers in the Oracle forum. If you have a SQL Server database use DB13 or the SQL Server Development Stuido for scheduling a database backup.
Best Regards
Clas -
Can't initialize OCI error occured during the login process using TOAD 9.0
I have installed the Toad 9.0 recently while login using the username & password for oracle 10.0 database , i am getting the error
Can't initialize OCI Error 1
But i am able to login using the Sql Plus successfully..
Thanks in Advance.Here's one more reason why this error occurs in Toad. It is when you have more than one Oracle Client installed on your machine. Even when you select the correct Oracle Home in "Connect Using" field of Toad, you still get this error "Can't initialize OCI. Error -1". So, to solve that you need to go to the installation folder of that Oracle Home (e.g. C:\Oracle\ora92\), then go to the BIN folder. Open Oracle.Key in Notepad and confirm that it is showing Registry entry/path to the correct Oracle Home (e.g. HOME0 or HOME1 or whatever).
I hope this helps. -
Errors during backup of MSSQL 2005 using DB13
Hi,
I have an ECC 5.0 system, and when I try to perform any kind of backup of a MSSQL 2005 database using DB13 I get an error like this:
Modified: 2006-12-05 11:43:55.
Command: pc1.sap_backup_databases
@dblist="PC1,master,msdb",@r3db="PC1",@bdev="PC1
_v2",@unload=0,@jobname= "SAP CCMS Full DB Backup
of PC1,master,msdb [20061205114354]"
Descript: SAP CCMS JOB
*********** Task history information ***********
For run: 20061205 23:00:00
Status: 0 (failure) (see DB error log)
Message: 3013
Severity: 16
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITYSYSTEM. DBCC execut
ion completed. If DBCC printed error messages, con
tact your system administrator. [SQLSTATE 01000] (
Message 2528) The user-specified MEDIANAME "ID05S
" does not match the MEDIANAME "ID29S" of the devi
ce "PC1_v2(D:BackupPC1_2.bak)". [SQLSTATE 42000]
(Error 4037) BACKUP DATABASE is terminating abno
rmally. [SQLSTATE 42000] (Error 3013). The step
failed.
The strange thing is that if I create a new backup device in MS SQL Server Management Studio, and assign a backup job to use this backup device, the backup is successfull... but only the first time I schedule the backup. Following backup attempts to same device fails with the error message above.
Any ideas, anyone?
Regards,
ThomasHi Kan,
So your suggestion is that I should run a backup with the format media option selected? I believe I have tried that, but I will nevertheless give it another go.
Will keep this thread open in the mean time.
Thomas -
Dear Experts,
I want to take offline and online backup into tape but when I initialing tape drive through DB13
which parameters require to take backup on tape
Job started
Step 001 started (program RSDBAJOB, variant &0000000000035, user ID BASIS)
Execute logical command BRBACKUP On host BWDEV
Parameters:-jid TAPIN20140805161238 -u / -i force -c force -n 1 -v SCRATCH
BR0051I BRBACKUP 7.40 (10)
BR0055I Start of database backup: beollvud.tib 2014-08-05 16:12:39
BR0484I BRBACKUP log file: /oracle/BWD/sapbackup/beollvud.tib
BR0477I Oracle pfile /oracle/BWD/112_64/dbs/initBWD.ora created from spfile /oracle/BWD/112_64/dbs/spfileBWD.ora
BR0205I Backup volume initialization
BR0058I BRBACKUP action ID: beollvud
BR0059I BRBACKUP function ID: tib
BR0102I Following backup device will be used: /dev/rmt0.1
BR0131I All volumes get the name SCRATCH
BR0129I Force option set - no label checking during initialization
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0207I Volume in device: /dev/rmt0.1 will be initialized with name: SCRATCH
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:39
BR0226I Rewinding tape volume in device /dev/rmt0...
BR0278E Command output of 'LANG=C tctl -f /dev/rmt0 rewind':
/dev/rmt0: I/O error
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0279E Return code from 'LANG=C tctl -f /dev/rmt0 rewind': 2
BR0213E Winding tape volume in device /dev/rmt0.1failed
BR0219E Initialization of volume SCRATCH in device /dev/rmt0.1 failed
BR0206I End of backup volume initialization
BR0280I BRBACKUP time stamp: 2014-08-05 16:12:58
BR0054I BRBACKUP terminated with errors
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished
RegardsThanks Yogesh
output of mt -f /dev/rmt0 status
# mt -f /dev/rmt0 status
rmt0 Available 71-T1-01 Other FC SCSI Tape Drive
attribute value description user
block_size 512 BLOCK size (0=variable length) True
delay 45 Set delay after a FAILED command True
density_set_1 0 DENSITY setting #1 True
density_set_2 0 DENSITY setting #2 True
extfm yes Use EXTENDED file marks True
location Location Label True
lun_id 0x0 Logical Unit Number ID False
mode yes Use DEVICE BUFFERS during writes True
node_name 0x2001000e11152b2a FC Node Name False
res_support no RESERVE/RELEASE support True
ret_error no RETURN error on tape change or reset True
rwtimeout 144 Set timeout for the READ or WRITE command True
scsi_id 0x11d00 SCSI ID False
var_block_size 0 BLOCK SIZE for variable length support True
ww_name 0x2002000e11152b2a FC World Wide Name False
parameters are set of my AIX by defualt in initSID.sap.
Regards -
MC DAQ initialize.vi error
Hello,
I am trying to use MC DAQ Initialize.vi for reading some CCP and I have the bellow error
-301034
MC DAQ Initialize.vi
Error -301034 occurred at MC DAQ Initialize.vi
Possible reason(s):
ECU Measurement and Calibration Toolkit: (Hex 0xFFFB6816) The definition of the measurement could not be found in the A2L file. Most likely, the name of the measurement is misspelled or otherwise invalid, or the A2L database file has been corrupted. Solution: Make sure that the name of the measurement is spelled correctly and that the A2L database file is valid.
The a2l database is ok cause i'm using with other Vi's. Also the names of signals are copied exactly from a2l file so there is no typo error.
Does anybody encountered this issue or can somebady help with an idea?
Thanks,
VincentHello Vincent,
You should be able to open the A2L file with notepad. I would suggest opening it and searching for your measurement. If you can find it, then the name must not be a typo. There may be something inside the measurement that our parser is having trouble with. If you could copy the section for your measurement here, we may be able to see what is going on. (You can use dummy values for addresses, etc when you paste the part here.)
You can also try running the M_C Explorer example that ships with the toolkit (Help-Find Examples. Hardware Input and Output -> CAN -> NI-CAN -> ECU Measurement and Calibration -> Advanced). This example opens all the measurements and characteristics in the A2L file, so you can see which values you have access to and if they are configured properly.
I hope that helps. Have a great day.
O. Proulx
National Instruments
www.ni.com/support -
Actions scheduled using DB13 fail.
Hi All,
Actions like Whole Database Offline Backup, Check DB, Update Statistics fail when scheduled using DB13. It gives the following error: <b>Can't exec external program (Permission denied)</b>
But the same when scheduled using BrTools, complete successfully. Please guide me.
Regards,
Anil.Check the owner, group, and permissions for BR*Tools and SAPDBA as
described in Note .
<a href="http://service.sap.com/sap/support/notes/113747">113747</a> -
Error using iManager Setup DNS
I'm trying to setup DNS on our server using iManager. Under Small Business
Setup, Setup DNS and am getting this error
The DNS server object (host , domain fs1) failed to initialize. Error:
eDirectory Interaction Failure
Can't find anything in the KB. Can anybody help me?
Thanks,
KimAnders,
I apologies. I did see that TID and when I went to follow the Fix section,
everything was already setup. After you pointed it out again I re-read it
and noticed that I did not follow the Additionally paragraph under the
steps. Once I did that everything seems OK. Sorry about that. Guess I
need to try and start getting more sleep so I pay attention. :-)
Thanks for helping.
Kim
"Anders Gustafsson" <[email protected]> wrote in message
news:[email protected]..
> Cti,
>> eDirectory Interaction Failure
>> Can't find anything in the KB. Can anybody help me?
>>
> Odd.. This was the first hit for me when I searched for that error:
> http://www.novell.com/support/search...200%2035444313
>
> - Anders Gustafsson, Engineer, CNE6, ASE
> NSC Volunteer Sysop
> Pedago, The Aaland Islands (N60 E20)
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
> Using VA 5.51 build 315 on Windows 2000 build 2600
> -
The problem is with a CP1215 a sealing tape error, toner dam (alert) my previous one work for a while when I went to use the printer again this error occured so I purchased another cartridge, removed the sealing tape same error, have cleaned the contacts removed the toner from the tracks is there another way to clear this error?
ThanksHi TW222,
Below I have attached a reply that I gave to someone else with a similar problem on this forum. The engine you have is contemporary, but I did not work on it at HP and I am not sure it provides the same messaging. The note below has the error "Remove Shipping Lock" but you suggest sealing tape error (It is the SAME thing). Please respond if this solution helps in your case. We have seen the error in several different machines with non-HP cartridges, but the 1215 I have not heard of similar reports.
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Laerjet-400-Pro-color-printer/m-p/33...
Dovid
Note - I work in Laser Jet Printing at HP ((;-)
The opinions expressed here are my own and not those of HP. Kudos are appreciated if I have helped you. -
Offline Backup in SQL Database using DB13
Hi experts,
I am new to MSSQL database.
We are using ECC 6 with MSSQL 2005. In DB13 we get the following options.
Full Database backup
Diff DB backup
Transaction Log Backup
Check DB consistency
We do not have the option to take a offline backup from DB13.
My question is, weather it is possible to take a offline backup in MSSQL.
If yes could please give me the procedure for doing a offline backup using DB13.
Thanks in advance for the response.
Regards
AnilLol, No by definition SAP and SQL would need to be down to take that type of file backup.
Offline backups are not a supported recovery method.
Online backups will allow for PIT or full recovery.
Offline backups will not be report in SQL or SAP as you haven't backup the database - rather just the files. -
I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?
You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.) -
Error message: AgServerMigration ERROR Using store provider as a session is deprecated.
Hi. I'm using a MacBook Pro, OS X 10.6.5. I have been opening files in Lightroom, editing them, and then doing finishing touches in CS5. When I save the file in CS5 and close it, my Mac returns the above message in Console eight times:
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
I have no idea what this means, or whether it is a problem. Does anyone know what this is?
Thanks.I see the same thing and have done for some time. The actual file is being saved back. etc. So, in that respect both Lr and Ps are working fine. IOW, ignore it.
-
Received HTTP response code 500 : Internal Server Error using connection Fi
Hi everybody,
I have configured a file-webservice-file without BPM scenario...as explained by Bhavesh in the following thread:
File - RFC - File without a BPM - Possible from SP 19.
I have used a soap adapter (for webservice) instead of rfc .My input file sends the date as request message and gets the sales order details from the webservice and then creates a file at my sender side.
I monitored the channels in the Runtime work bench and the error is in the sender ftp channel.The other 2 channel status is "not used" in RWB.
1 sender ftp channel
1 receiver soap channel
1 receiver ftp channel.
2009-12-16 15:02:00 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS EO
2009-12-16 15:02:00 Information MP: entering1
2009-12-16 15:02:00 Information MP: processing local module localejbs/AF_Modules/RequestResponseBean
2009-12-16 15:02:00 Information RRB: entering RequestResponseBean
2009-12-16 15:02:00 Information RRB: suspending the transaction
2009-12-16 15:02:00 Information RRB: passing through ...
2009-12-16 15:02:00 Information RRB: leaving RequestResponseBean
2009-12-16 15:02:00 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:02:00 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:00 Information Trying to put the message into the call queue.
2009-12-16 15:02:00 Information Message successfully put into the queue.
2009-12-16 15:02:00 Information The message was successfully retrieved from the call queue.
2009-12-16 15:02:00 Information The message status was set to DLNG.
2009-12-16 15:02:02 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:02:02 Error The message status was set to FAIL.
Please help.
thanks a lot
RamyaHi Suraj,
You are right.The webservice is not invoked.I see the same error in the sender channel and the receiver soap channel status is "never used".
2009-12-16 15:52:25 Information Send binary file "b.xml" from ftp server "10.58.201.122:/", size 194 bytes with QoS BE
2009-12-16 15:52:25 Information MP: entering1
2009-12-16 15:52:25 Information MP: processing local module localejbs/CallSapAdapter
2009-12-16 15:52:25 Information The application tries to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:25 Information Trying to put the message into the call queue.
2009-12-16 15:52:25 Information Message successfully put into the queue.
2009-12-16 15:52:25 Information The message was successfully retrieved from the call queue.
2009-12-16 15:52:25 Information The message status was set to DLNG.
2009-12-16 15:52:27 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Internal Server Error using connection File_http://sap.com/xi/XI/System.
2009-12-16 15:52:27 Error The message status was set to FAIL.
what can I do about this?
thanks,
Ramya
Maybe you are looking for
-
Word docs don't open full screen on iBook
My brother, up in Maine, I'm in NY, has an iBook with Word X on it. (I don't know the version of OSX he has but he probably hasn't updated it since he bought it... I am not sure of the model of his iBook either. I can find out.) His main complaint is
-
read the above
-
Is it possible to use LONG columns in WHERE clause or ORDER BY?
Is it possible to use LONG columns in WHERE clause or ORDER BY?
-
Unable to save or open files in Excel from Office 2011 on my Mac Air with Mountain Lion?
Excel 2011 no longer saves or opens files?
-
HT4044 Early MacBook white screen?
Upon opening my MacBook, saw a screen with scrolling multi color lines, all the while trying to open my home page. Soon went white, and has stayed there. Any suggestions?