Inputs required for Displaying whole Report in Single Currency only

Hi All,
Actually in R/3 Transactions are recorded in different currencies like 1)USD
2)AUD,CAD,EURO(Non-USD or FCC)
Firstly,
I need to display whole report in USD only. I have to convert all other currencies to USD (What are the posssible options and how to handle Currency Conversion)
Second Scenario
Moreover I have to provide Selection Screen options for Query in such a way that query has to display like below
1) USD only.( If I give USD in selection screen of query it has to Retreive USD data only)
2)FCC(NON-USD) only.(It has to retreive AUD,CAD,EURO etc only)
3)Doc Currency (if i give whatever currency like it that may be USD or CAD or AUD that only should be retreived.)
How to handle the above Selection criteria
As iam not aware of the above Pls be very clear.
Regards,
C.V.

Hi,
If you shift the display mode of FF7B to standard Overview (F9) or click balance on display currency, the values will be shown in selected display currency in the entry screen.
The pre-requisiste for getting correct value is to maintain the curr conversion table daily using OB08.
Regards
Prasad AV

Similar Messages

I have a requirement for the Standard report like QA33

Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMAL

When changing or deleting one or more lines of the internal table
"\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS"
     where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
     area from or inserting a line area into the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
     area from or inserting a line area into the table
   "\PROGRAM=ZRQEEAL10\DATA=SELECT_FIELDS".
At the time of the termination, the table contained 2 lines.
This is the error
I went to se80 and copied the whole program - > but getting this error

Blank not Zero for Display in report

Hi,
For a Particular Calculated Key Figure X, I get a Zero value using a logic such as
if Y=0; X=0.
For Display in Report, Currently it shos the vakue as Zero. I want to show it as a blank vaklue instead.
Could you suggest how to achiev this ?
I can not suppress Zero becuase for the other Key Figures in the report, i should show 0 as 0 only.
Please acknowledge
Regards
Shweta

Hi,
In the query designer, go to query properties, the button is just before the check query button. In the Display tab, in the section Number format, you have a setting for Zero Value Display. Click on the options and select, Suppress Zeros. You also have the option of showing the zero as something else.
This setting is different from the Suppress zero setting, which will suppress the line when all key figures are zero.
Rgds

Tcode SD related for displaying a report with completed deliveries

Dear SAP Experts,
I would like to ask you a question.
Is there any Tcode for displaying a report with all the completed outbound deliveries (8000++) or posted goods issues (4900++) with the relevant net values of the relevant sales orders, BEFORE the creation of the relevant billing documents.
Great Thanks in Advance
Kind Regards
John

You can use transaction VF04 - Billing due list.

Printing requirements for Bi publisher report

Hi all
Can any one tell me the steps required for me to look at the setups on my server side so that i can print the reports using the bursting API.The problem is i am not able to debug the log file as there is no connection error or any other exception but still i am not able to see the documents printed.
this is part of my log file
POST /printers/u260 HTTP/1.1Host: u260:631
User-Agent: Oracle XML Publisher 5.6.3
Connection: Keep-Alive
Transfer-Encoding: chunked
Content-Type: application/ipp
<<<
IPP version: 10
operation id: 410
charset: utf-8
request id: 1
-- operation attrs --
[1]attributes-charset:utf-8
[1]attributes-natural-language:en-us
-- printer attrs --
-- job attrs --
From this i understood that there is no problem with the connection but some how it is not printing.
Any help will be appreciated as i am having tough time figuring out this.
Thanks
Harsha

You need about 40 GB total. Also make sure that your /tmp and /var/tmp have about 2GB free in them, otherwise the installation will fail. (I can't remember the exact numbers, though.)
I agree, the system requirements do not exist anywere in any straightforward documentation. You need to read at least three different documents to piece together the requirements, and the results will still be incomplete.

Help required for our Crystal Reports billing reports

Hi there, excuse me if this is the wrong location to make this post, just registered today and in need of help. We employee an in house developer and use Crystal Reports 2008, Service Pack 3 and have a couple of issues using Crystal Reports effecting the bills we email out to our clients and hoping someone can advise or point us in the direction of a partner who is an expert in this area.
Issues are:
We use a background colour for each section of our customers bill. When a section rolls over on to another page i.e. multiple sections we cant get the background colour grow to the bottom of the page. For example the customer sees the background colour stop possibly 1/2 way down the page.
Intermittently about 30% of the time where the customer has more than 2 pages we get a blank page inserted with nothing but has our logo in the same position.
Displaying $ figures using the default currency format on to the bill shows negative figures with the $ in front of the - i.e. $-2.81 instead of -$2.81
We have an issue occasionally the last line on the bottom of a page changes the thickness of the line and also the position i.e. the line appears lighter & sometimes indented about 10mm.
We would love to apply a banner down the right hand side of our landscaped page however the bill is broken into sections which we understand we cant have a full length banner? Open to ideas.
Thank you for any direction on how to resolve these issues, we have been living with them for 3 years. As mentioned above happy to pay for any expert to help us through this or refer to a partner.
Thanks again
Dwayne

To add to Jamie's post. Updating to Service Pack 7 will not be a bad idea either. You will have to contact sales: 866-681-3435or Customer Interaction Center: SAP Service Marketplace Content Page to get the SP.
Other than that, one question per Discussion would be great. SCN Rules of Engagement.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Development and Production Requirements for a Forms/Report application

Dear all,
We have an application witch run in client/Server mode using Forms/Reports 6i For 300 users.We want to migrate it on Forms/Reports 9I using Oracle 9IAS and Oracle 9IDB.
I would like to have advises about material requirements of both development and production environment((developer deskop, development appServer and databaseServer, end user desktop,production databaseServer and production AppServer).
Thank u for giving more details about my request.

I have my dev and production on 2 different databases/instances, and the workspaces have a different name aswell (think 'dev' and 'prod').
I do reuse my application ids, which makes the whole process a lot more manageable: easier for me to identify and replacing a whole application.
However, when i want to replace only 1 page, apex stumbles over the workspace. Bummer.
So i took an export of a page on both workspaces, and opened the files.
prompt Set Credentials...
begin
-- Assumes you are running the script connected to SQL*Plus as the Oracle user APEX_040100 or as the owner (parsing schema) of the application.
wwv_flow_api.set_security_group_id(p_security_group_id=>nvl(wwv_flow_application_install.get_workspace_id,1377027056414870));
end;
wwv_flow_application_install.get_workspace_id,1377027056414870));
I took both workspace IDs and keep them in a simple txt in my installation-files folder. Each time i need to import a page from dev->prod i go in the exported file from dev and change the workspace id to the id of my production workspace id. Everything works magically after that.
If your application ids also differ, you can try changing the id in the exported file aswell, but i can't tell if it works or not since i've not done that yet.
prompt Set Application ID...
begin
   -- SET APPLICATION ID
   wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,130);
   wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
null;
end;where of course you'd change around nvl(wwv_flow_application_install.get_application_id,130);

Concat rows into one string for display on report

I have a result set having 1 column and multiple rows.
On the report I just want to display all the rows comma separated.
For example:
Name
RAM
GURU
Sundar
Shyam
Inba
KalaiOutput:
"RAM, GURU, Sundar, Shyam, Inba, Kalai"Any help appreciated
Thanks.

Hi,
it's ok like this.
The result will be your return value.
The reason is that if you choose context instead of value that you could have more than one return value.
In your case you could use the code of Rohit and then just map it like
input (with context E1EDPT1) -> UDF -> target
Regards
Patrick

Help required for the users report requirement

Hello,
User requirement is to get the report as follows
Period            planned order     Production order      Backlog
Feb2008          15                           3                      18
March2008      4                            11                     15
Backlog is the formula for planned order & production order.
My problem is that, In the cube the data for planned order is the char value 'X' or a blank.
It has to count the total of planned order for the entire month of feb,& print the value counting the number of 'X',here as shown as 15.
Planned order, Production order are in rows & are chracteristics.
Is thr any solution to count master data which has a char value(X).
I have tried using the formula variable.I had created the new formula.Then using the data functions as count(Formula variable),using the replacment path.But it did not work
Help me out to find the total for the char value of the master data.
Help would be rewarded!

Hello,
For BACKEND:
1) Create a normal KF say counter and include it in the cube.
2) Now you can populate the value for this KF via end routine in transformation.
3) You need to check whether the value for planned order is X. If yes then update KF with value 1.
4) I hope you can take care of this routine part. Once this is done the data in the cube might look in below manner:
Month Planned-Order Counter
Feb 2007 | X | 1
Feb 2007 | X | 1
Feb 2007 | | 0
Feb 2007 | X | 1
Feb 2007 | | 0
Mar 2007 | | 0
Mar 2007 | X | 1
Mar 2007 | | 0
Mar 2007 | | 0
Mar 2007 | X | 1
Now in the report if you include month and counter the report will look like
Month Counter
Feb 2007 | 3
Mar 2007 | 2
If you see the counter is getting aggregated to give you the sum against the value of planned order as X against month.
I think this should work.
If this dosent work let me know i will let you the alternate solution for frontend. but for that too you need to make the above backend changes.
So do the backend changes and try to use counter KF for showing planned orders and i think it should work fine.
Regds,
Shashank

Webdynpro development in for Displaying Tax report in ESS.

Dear Expert,
I am working with EP 7.0 and ERP 200r specifically on ESS.
In the business package for ESS there is no standard iView that shows Tax report.
Now I want to develop an iView (in Web Dynpro) that displays fetches tax report from R/3 from transaction pc00_n20_laps_lpo.
Suggest from your experience how to achieve it.
Regards

what are you looking at when you say tax report ... if you are looking at something like form 16 but every month then you can use the fms available and you can take an approach that is taken for payslip please.

Logic required for my normal report

Hi,
my report output is below .
docu #               material no.           quantity       net price
55467488          12376                        10                5
55467488          12376                         20             10
55467489           12376                        30             12
                                                             60             27
55347388             34567                        56            8
55347387            34567                          12           12
                                                                  68           20
grand total                                     ________________
                                                                 128           47
My requirement is now user wants for same material instead of individual lines it should come only one line with addition operation.please help me how to do it ??In my int. table all the records availavle but ho
ex.    55467488              12376                        60               27
          55347388             34567                        68               20
Please search for available information before turning to the forums for help.
Edited by: kishan P on Sep 3, 2010 11:00 AM

Hi,
   Use AT NEW and AT END OF control statements for ur requirement. Search SCN how to use AT NEW and AT END OF statement or press F1.
Regards,
Selva

Inputs required for ESS Worflows

Hi! Experts,
I have a question in ESS Worflows? The Workflow is for 'Work Permit Application' which is complete customized development with Portal ivews. Now as Employee will fill out this form and press Submit than at the same time Workflow need to be triggered in background in SAP R/3 for some approvals.
Now my doubt is that how will I know that the end user has entered something in that forms as there is no Standard Business Object Event since this is customized developement?
So in this scenario do i need to create a Z Business Object with some events but the problem here is that there is no Super type for the Z business object, if this can be done than please provide me with some sample step by step procedure for the same.
Please provide me with some sought of inputs as I am new to ESS Workflows.
Thanx in Advance
Mistry Wasim

Hi Mistry,
Similar questions have been asked before so you could search for those. Do you only use iviews or also webdynpros in the iviews?
From the portal you have the option to call RFC's, so you can trigger an event using the standard WAPI (mentioned several times here in the forum). You can also use a standard object and event (BUS1065 for instance) if these fulfill the requirements.
Regards,
Martin

Information required for e-load report

I would like to gather more information on the items displayed in e-load sessin report, under "Performance by Profile and Timer", like
Avg?
Std Dev?
90th %?
I guess I know about following two items
Min: Min time VU took to navigate a perticular page
Max: Min time VU took to navigate a perticular page
I have attached the sample report.
Thanks

The e-Load help says the following:
Avg - the average performance for the virtual user profile or server response timer in seconds.
Std Dev - the number of seconds that the performance of virtual user profiles or server response timers deviated from the mean (average value).
90th % - shows the number of seconds that the performance of ninety percent of the virtual users or server response timers was at or below.
For some reason your attachment had question marks in it, so I cannot see exactly what you were pointing out.
-GateCity_QA

Requirements for displaying Adobe forms

Dear All,
I have developed an application with interactive form ui element(Adobe). When I deployed the application I was not able to see it initially but after the installation of ACF I am able to see it perfectly(thanks to Arafat in this forum). Now, I just want to know what are the end user requirements in order to be able to see the application on their end. My queries are:
1. What are the end-user requirements in order to see these adobe interactive forms?
2. What is the native type in interactive forms UI element and what does it do(if I set type as native)? In which version this native type is available. I am using 2.0.9 version right now(I have 7.0 version too) but I was unable to find this type in any of them.
3. Does the user requires the installation of ACF in order to view this adobe form once deployed on their server?
4. What is the minimum version of Adobe that needs to be available at the client machine in order to be able to view this interactive form?
I hope I am clear with what my doubts are. It's a bit urgent . Helpful answers will be appreciated with reward points.
Thanks and Regards,
Gaurav Bhardwaj

Hi Gaurav,
Here are answers to your queries:
1: End User Requirements -
If you are using activex controls:
- Adobe Reader 7.x or above and when using ver 8, then 8.1 & above
- ACF Installed
If you are using Adobe Native Controls:
- No need for ACF
- Adobe Reader 8.1.x or above
2: You can find native type nder displaytype property of Interactive form UI elemen. If you are using the nativ type, then it makes the ZCI.
3: Yes, if you are using ActiveX components in your form, then you need ACF
4: 8.1 or above is best... 7.x will also do but there may be some instances where 7 wouldnt work
Hope this resolves your issues.
Regards,
Arafat

Inputs required for Sales & Service scenario

Hi All
I have a situation here.
I have to charge my customer for the services period.
Let us say for Example my company has provided services to a customer worth 1000 dollars and now i have to invoice to the customer. But the customer pays 25% for it and 50% by his insurance company and 25% by his employer. How can i do the invoicing process.
Now how can i handle this scenario. Any inputs are appreciated.
Thanks
Sonali

Hi
U can add the Bill to partys and partner function tab
r u doing billing in R3 or CRM
Regards
Manohar

Inputs required for Displaying whole Report in Single Currency only

Similar Messages

Maybe you are looking for