Insert picture then . . . nothing!
Trying to start a doc with a pic. So far so good. Pic
installed but then I could not add text below it as I desired.
ALSO imported a doc with an illustration & it failed to
show the graphic, just the text.
I'm a little puzzled by your inability to add text after
inserting an image. Is it possible that you still had the image
selected when you tried to type? If this is the case, just click
away from the image and start typing. If it's not the case, could
you provide us with more detail as to what is happening?
If you're still having trouble importing that .doc file (is
it .doc or .docx?) and would be willing to have us take a look at
it, please send it to [email protected]
Similar Messages
-
After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?
Hello,
See if it'll Safe Boot from the HD, (holding Shift key down at bootup). -
Can anyone tell me how to make cursor smaller after inserting picture so that l can add somethimg right next to it instead of bottom of picture. Meaning the next line is too low
AFAIK, you can't. The nature of TextEdit is that it allows the picture to be treated as a character and adjusts the cursor size for that line.
You need a app that supports transparent overlays. -
Contribute CS4 +Blogger and inserting pictures
I'm not fluent in Contribute, but I used to be able to insert
pictures when I published to Blogger. I checked my connection,
etc., and everything works with text; however, when I hit the
button for inserting a picture, it is grayed out. When I went back
to Contribute CS3 and tried the same thing, I inserted the picture
but I got a message saying the document couldn't be published
because it included pictures that were local. I had no success with
pictures from the option of the internet, either.
I tried signing in to Blogger, but the screen I got was the
Blogger editor.
I'd appreciate any help as I really want to use Contribute
but I'm at a standstill as to what to do. According to what I've
seen, inserting a picture should be as simple as dragging from an
application -I appreciate your answer to my question. I have purchsed several books on Flash CS4, including Adobes own Classroom in a Book for Flash CS4. The problem is that none of them show a tutorial on how to do this. I am hoping that you can give a more lengthy description of how to accomplish this task. I'm having a problem invisioning how the movieclip is created with my page. For instance, imagine that my primary page size is 1000 X 750. I want to create a scrollable page that includes text and photos. That page might be 800 X 2000. Therefore it would have a verticle scroll. How do I begin to arrange the text and pictures on such a long page? Do I create a completely different Flash CS4 page that is sized to 800 X 2000? Then insert all of my text and pictures. Do a "select all" and save a s a movieclip? Then this becomes the source for the scrollpane? I've searched all day yesterday on the net and cannot find a tutorial on this subject. It is a staic page by the way. Nothing will ever change or get loaded. Thanks for the help!
-
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My ipod shuffle 4th generation was working fine for a few months. My son then bit the USB charger. I bought a new USB charger, but the shuffle is not charging and not showing up under the devices in itunes. It also doesn't appear in my windows under my computer. Just to note. I also have a new ipod touch. I am able to charge that fine on the same computer using the USB charger. The device (Ipod touch) does show up in windows and in itunes. The shuffle doesn't show in either place.
I have tried to use the apple support page. I went through each step. I made all of my USB drives not shut down, I had my computer on all night to try and charge the shuffle. All I see is a red light that appears on the shuffle for a few seconds when I first connect the USB charger to the computer. Then, nothing. Since this was working a bit ago, I don't think that I have a defective shuffle. The USB charger is brand new, I just picked it up yesterday from the apple store. I have the short one, and the longer cable as well.
Any help that you might be able to give to me would be much appreciated. My daughter is missing listening to her music. Thanks!Instead of "charger," you should call it the "USB cable" to avoid confusion. When started reading your post, I was thinking, how can your son break a USB power adapter (the "charger" that plugs into a wall socket) by biting it...
Since you got the product with the two USB cables at the Apple Store, you have the right replacement (some third-party replacements are for the 2nd gen shuffle and do not work with the 4th gen shuffle). Make sure you are completely inserting the plug into the headphones jack. The fit may be tighter than expected, since the connectors are new.
http://support.apple.com/kb/TS3572
If you tried both of those cables, it would be unlikely that you got two faulty cables in one package. If a new USB device has been added to the computer between the time it worked with the old cable and now, there could be a problem on the USB bus (such as not enough power or a device conflict).
As a test, you should shut down (power off) the computer and disconnect all USB devices (including any hub), except for standard keyboard and mouse (if used). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on the computer. -
When I power up my 2008 Mac Pro I get the "welcome chime", fan comes on, a light comes on on my Apple moniter and then nothing - black screen. What,s going on?
what you describe as the "welcome chime" is the indicator that your Mac has passed the Power-On Self test, and if a suitable source of software can be found, booting is likely.
If the screen stays dark, the most likely explanation is a graphics card failure. But it could also be caused by a backlight failure in the LCD, so be sure you try shining a bright light at the screen to be check whether the picture is there, but just not illuminated.
Graphics card failure will end the boot-up process in some cases, and not have an impact in others. Two external indications you can use when your display is not working are: The Caps Lock key, which is under the control of Mac OS X, and the Control-Eject dialog box shown below. Note that the default is Shutdown, so a Mac that shuts down in response to Control-Eject followed by Return is working fine. -
My G5 is starting up with an icon of a file folder with a blue smile face. The motor will run loudly for a few minutes and then nothing. I can not get it to run at all.
Any suggestions?Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't work, Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214 -
Hello,
How can I insert videocuts into a show I recorded myself? I am in the studio, presenting a show and during the presentation I want to show pictures and video to the audience.
* I wil first record the show in our studio
* And then I insert pictures and video on certain places in the recorded show.
Is this possible in Imovie 8 or in one of the older imovies.
Or must I use finalcut for this?
Thanks! Richard - The NetherlandsHello, Richard,
I have not used iMovie 8 much, so don't know about doing this in that version, but you can easily do this in iMovie HD 6.
I am not sure exactly how you want to do this. It depends on whether you want to place those photos and other video clips OVER the recorded show, so that the audio from the recorded show plays while the photos and videos are displayed, or if you want to have them ADDED in the midst of the recorded show.
If you just want to insert photos and videos in the midst of your recorded show, first import your recorded show into iMovie6. Put it in the timeline. Move the playhead to the point where you want the first photo, and do a 'split video at playhead' command, drag the photos/videos to the time line there. They will be added between the split video clips. Repeat for all the photos/videos.
It sounds as if the option you want is 'Paste Over at Playhead' which allows the photos and videos you add to be seen over the recorded show, so that the audio plays continually. In tv and movies this is done when someone is talking about something and then there is a 'cut-away' to a photo or video clip of whatever the person is describing so the audience can visualize what he is saying while he is speaking.
Here are instructions for doing that from iMovie HD6 Help:
*Inserting video clips or photos in a passage while maintaining running audio*
+You can paste a new video clip or photo over an existing clip while retaining the audio from the original clip. The video cuts away to a new picture, but you continue to hear the sound from the original clip.+
+To replace images in a clip while maintaining running audio:+
+Choose iMovie HD > Preferences, and then click General.+
+Select the "Extract audio when using Paste Over at Playhead" checkbox.+
+Select the video or photo that you want to insert.+
+Choose Edit > Cut or Copy.+
+Do one of the following:+
+To paste the entire video you selected in step 3, position the playhead at the first frame to be replaced. When you paste the clip, it will replace a portion of video equal to its length.+
+To paste over a specific segment of your movie, select the part of the video clip you want to paste over. (To learn more about selecting part of a video clip, see Related Topics below.)+
+If the video you're pasting is longer than the selected frame range, the excess video will not be pasted. If the video you're pasting is shorter than the selected frame range, the extra space will be filled with a color clip (or the still image, if you paste a still image).+
+Choose Advanced > "Paste Over at Playhead."+
+The audio track of the original video is retained and appears in audio track 1 of the timeline viewer.+
Post back if this does not address what you are trying to do. -
Inserting pictures in Crystal Reports10
In Crystal Reports 10, I have a number of boolean value fields (from .NET dataset). For each field I have two pictures (OLE objects), one ticked checkbox and one empty checkbox. Depending on the boolean value of the field, I suppress the appropriate picture to give the impression of an empty/ticked checkbox. All straight forward enough. This works fine and gives the expected results until I insert my 4th picture, then my report will not display. These pictures are in the Details section of the report. What I have found is that if you increase the depth of the Details section then the report will display again, but obviously it is unusable because of the depth of the section.
Anyone come accross this before?
Any clues?
Anyone know of a better way to achieve the checkbox scenareo (my method does seem a little protracted!)?Ok so here are links to screenshots which hopefully explain this bug a little better.
[Image1|http://img600.imageshack.us/img600/4982/ss0j.jpg] - This shows the report design as it is when working properly with only 4 images
[Image2|http://img706.imageshack.us/img706/91/ss1xe.jpg] - This is the report as displayed when working properly
[Image3|http://img21.imageshack.us/img21/281/ss2vac.jpg] - This is the report with 2 additional pictures added
[Image4|http://img401.imageshack.us/img401/6040/ss3j.jpg] - This is the report which will not now display
[Image5|http://img249.imageshack.us/img249/4631/ss4au.jpg] - This is the report with the Detail section depth increased
[Image6|http://img856.imageshack.us/img856/2356/ss5pu.jpg] - This is the report as displayed with the Detail section depth increased - successfully displayed but unusable.
Hope this clarifies my problem. -
When inserting pictures in a new mail message using the " photo browser" button I can view and select photos but the " choose " button is gone. What have I done wrong?
Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu. I have an external hard drive that is set up to Time Machine. The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day. I then clicked "Restore Library" at the bottom right corner of the Time Machine screen. Roughly 2 hours later my iphoto was back to normal. When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend. I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library. Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed. Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto? If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above. Otherwise, good luck with your investigations. I'd be interested in hearing how you make out.
Karen -
Inserting Picture (from Web- through Webdav) to Word document using VSTO code
Hi,
I have been trying to insert an image/picture to current selection in word. with help of code -
Microsoft.Office.Interop.Word.InlineShape s = this.Application.Selection.InlineShapes.AddPicture(
@"http://127.0.0.1:9001/test/myimage.png", true, true, Type.Missing);
This code works fine if image is on desktop or network shared location but some issues for URL exposed through Webdav.
On inserting the picture word shows - "The linked image cannot be displayed....." message. If we close and open word document again then image appears properly.
Some observations:
1. If we use same option through Ribbon "Insert -> Picture -> Enter path and click on "Link to File" then we get Prompt for Wevdav password (Only once, later Word caches it) and linked images appear properly.
2. Updating the shape explicitly wouldnt help.
s.LinkFormat.Update();
What we are looking for is, Does Ribbon "Insert" functionality do something additional to prompt Webdav authentication to cache? if we want to achieve the same? what needs to be invoked before we make call to AddPicture API?
Thanks
HThanks for the response..
No, when document is opened again, then you dont need to enter the password.
Somehow on document open event MS word knows how to retreive password from cookie for given domain.
When you insert the image using ribbon -> insert picture option,
MS Word first looks into cache if the domain cokkie already available then bypass authentication/password prompt
Otherwise it would show the prompt and store the cookie in cache again.
The mystry is how MS-Word interacts with this "cached cookies"
while doing more reading on this, it seems MS Word has been using Klink.dll for this kind of functionality https://support.microsoft.com/en-us/kb/899927 but it would be great if you can provide more pointers.
>>Could you share an image link of Webdav?
Since, it's my local webdav server, you would not be able to access the image link, may be you can upload an image to sharepoint (as sharepoint also supports webdav) and use that for reproducing this problem at your end.
Thanks
H -
'insert picture' is not working
hi
i'm trying to insert a picture (logo) into report:
Main menu -> Insert -> Picture... ->
then i click somewhere in the report and i get browser dialogue where i choose .bmp file. After that a rectangle appears with a line by it's diagonal in my report but no picture at all. what's wrong?
best regards, PavelElizabeth Nielsen,
yes, you understood me right, i did everything as you say.
but i've solved it!
the problem is that the bmp file name had cyrillic(russian) characters, i renamed it into latin characters and it's ok now! Seems BO doesn't like russian language
thanx for reacting. -
There is a bright light... then nothing...
Hey all. I have a lovely 27" iMac i bought in March 2010. Today, I went to wake
it up and the screen flashed, then it went blank and wouldn't come back.
It will now not reboot, after resetting the PRAM, I now always get the startup tone,
sometimes after that I get a flash of the grey screen, but then, nothing... it sounds
like the drive runs a little, but it clearly doesn't boot up.
Things I've tried:
1) reset PRAM
2) boot in recovery mode
3) boot in safe mode
4) I took all the ram out and just cleaned the dust off, inserted various combinations
hoping it was bad ram, still nothing.
The Mac is running Mountain Lion, latest version. 8gigs of Ram.
Thanks for any suggestions.Sounds like a hardware failure, run Apple Hardware Test in extended mode at least 2-3 times in succession. If error codes appear it's a confirmed hardware failure that needs repair at your local Apple Store or AASP. If the machine is still covered by AppleCare then the repair will be covered. If no errors appear then still take it in, AHT is not the most reliable test. The techs have better tools available to them, that you don't have access to. BTW don't bother to ask what the AHT error codes mean, Apple does not publish that information.
-
How to insert picture in a table
Hi,
Can anybosy tell me the syntax of inserting a picture in a table and because at someplace i was reading that we can do it if data type is BLOB (i am not sure). Can anybody tell me detail and step by step way to insert and then query that picture.
Your helps and suggestions will be highly appreciated.
Thanks
Regrads
MuhammadWhat you need to look into Oracle Intermedia. The documentation explains how to add the image data to the database and also how to retrieve it once there.
Maybe you are looking for
-
There songs in the wait status and not any more on my mac
I have songs in the cloud which are still on wait status but I have them not any more on my computer.
-
Additional fields in Delivery order
Hi, I have a requirement where I have to enter some additional data while creating Delivery order. Just like Additional data A and B tabs , is there any tabs available in delivery header or item data ? or is there any other solution available ? Pleas
-
Is that normal? My iPod touch G5 standby after fully charge 2 hr 58 min. then level battery is 68.5%. (use voice over to read battery level)
-
Hi All, I am working on IP retractor, this retractor is using a query in the BW side and after the retraction, and there is an FM which uses fmcycopi_bw to do the retraction. The customer can see the data in FMRP_RW_BUDGET. Now the problem is n
-
Option 2: Clear URL parameters jut before page is displayed
Is it possible to clear the URL parameters after they have been used to filter out recordsets, etc. but before the page is displayed so that the URL address does not have any url paramters ? A