INSERT with Dreamweaver

Can somebody explain to me how to use the SQLstatement INSERT
with dremweaver 8.
Before i should SELECT i should be able to INSERT details
from a .asp into 'i my case' database.mdb.
please can somebody explain to me how Dreamweaver 8 goes over
this issue and how to do it
Thanks in advance

http://www.aspwebpro.com/aspscripts/records/insertnew.asp
Something like this?
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"thebold" <[email protected]> wrote in
message
news:eptack$nmb$[email protected]..
> Can somebody explain to me how to use the SQLstatement
INSERT with
> dremweaver 8.
> Before i should SELECT i should be able to INSERT
details from a .asp into
> 'i
> my case' database.mdb.
> please can somebody explain to me how Dreamweaver 8 goes
over this issue
> and
> how to do it
>
> Thanks in advance
>

Similar Messages

Insert Flash with Dreamweaver CS3 Question

So I have been building websites for awhile and have always relied on the built in insert flash object that came with dreamweaver as I have never had issues with it.
However as I finished a site recently the client had a friend look at it and brought up the red flag that the site was not w3 compliant. So I go and look at the little tool they have and the only error that comes up is related to the insertion of flash on the page.
I googled it a bit and found a number of people saying that the insert flash through dreamweaver will no show up as compliant. A couple solutions to fix the problem.
But before I go down that road, I want to ask. ...Does it really matter here? Seems like Dreamweaver insertion would be compliant? I mean come on the link that the w3 give to fix the problem is a link from a fix created in 2002.
I have never heard of anyone saying no the flash does not show up so right off I am not terribly concerned but it would be nice to know..
Also if it is important and suggestions as to a nice fix to the issue would be great.
Thanks for your time,
Chris

Right you are!
I tend to spot check pages and haven't done a W3C check on a flash embed in my websites (apparently). Just did one pursuant to your question. The page is 100% compliant without the Flash video. has 51 errors, 35 warnings with it. Lots of those errors are Adobe-generated Javascript that handles the flash video insert, skins it and so on.
Here is where Adobe may not be compliant with the W3C.

Adding keywords to a web page with Dreamweaver 8

Hi,
Does anyone of you know how to add keywords to a web page
with Dreamweaver 8? I want the link to the web page shows up when
people google the keywords. I pulled out the instructions from
ehow.com and followed the instructions by using the HTML Keywords
function in the Insert menu. I tested it on Google website by
entering the keywords but it did not work.
Any clues would be helpful.
Thanks,
Shirley

Let's put it this way - those sites I have that are highly
ranked do not
have any meta keywords on them. So - you do the math....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Nancy O" <[email protected]> wrote in message
news:[email protected]...
> Maybe...
>
>
http://www.hypergurl.com/articles/metatagswhatare.html
>
> "Will Meta Tags Improve My Rankings?
>
> Unfortunately, the majority of the major search engines
do not recognize
> the
> meta keyword tag at all. A larger number do recognize
the meta description
> tag for the purpose of creating a summary for the page.
The prevailing
> philosophy is that search engines prefer to index text
that is clearly
> VISIBLE to the user, although exceptions are certainly
made. The engines
> in
> general consider invisible text, such as that found in
meta tags, as
> "untrustworthy" since they can be easily abused by an
unethical Webmaster.
> For example, someone could list out many keywords that
do not apply to
> their
> page's content, or they could repeat a keyword many
times in hopes of
> boosting their rankings.
>
> Of the engines that do support meta tags, none are
thought to give extra
> "relevance" to words appearing in meta tags versus
elsewhere on the page.
> In
> fact, most engines give words in these tags less weight
than if they had
> appeared elsewhere on the page such as in the body area
or the page title.
>
> You might then conclude that meta tags are useless?
Well, not quite. You
> definitely want to include a meta description tag on
every page to avoid
> the
> search engine making up its own description from random
excerpts on the
> page.
>
> In regard to the meta keyword tag, many experts believe
that including a
> keyword in BOTH your meta tags and in other areas of
your page CAN help
> improve your rankings. For example, let's say your
keyword was "Star Wars
> collectibles" and it appeared in the body text that is
visible to the
> user.
> If the keyword were also included in your meta keyword
tag, then that
> would
> reinforce to the search engine that "Star Wars
collectibles" was an
> important theme on this page. Although no extra
relevancy boost is given
> for
> including the keyword solely in the meta tag, some
engines may look to the
> meta tag as a way to reinforce their belief that a page
is relevant if all
> the other more important factors "check out" too.
>
> In any case, including the tags are unlikely to hurt
your rankings if you
> follow a few simple rules. Be careful not to repeat the
same keyword more
> than two or three times in the tag. Never repeat the
same word twice in a
> row or you may trigger a search engine's "spam filter."
Lastly, never
> include keywords that do not apply to the content of
that page."
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
>
>
> "John Waller" <[email protected]>
wrote in message
> news:[email protected]...
>> > No one? Several regulars here do.
>>
>> Is there any point in using them other than typing
practice?
>>
>> --
>> Regards
>>
>> John Waller
>>
>>
>
>

Embedding Lightroom HTML gallery with Dreamweaver

I'm new to Dreamweaver and have used it to build a portfolio website. I've created HTML image galleries using Lightroom and would like to integrate these galleries into my existing page design. Lightroom generates an Index file, as well as Context and Resources folders. I've seen an earlier discussion about using LR to upload the galleries to my host, then edit the HTML to link the gallery pages to my other web pages. This strikes me as cumbersome for two products made by a single company.
What I'm after is a clear answer about if I can embed these HTML galleries quickly and easily into my existing page design? My other solution is to use the Airtight SimpleViewer gallery, but since it's using Flash, my galleries won't work on Apple mobile devices.
I'm using Dreamweaver CS5.5 and Lightroom 3.
Thanks in advance for any help.

You can't edit a flash gallery with Dreamweaver.
To make changes to the LR flash gallery you would require a copy of the original fla file and a copy of Flash to edit it.
The index file you see is the one that loads the flash player to play your gallery. The message is what is seen in a browser that doesn't have flash player installed.
You can make amendments to the gallery itself by changing the xml files, although the changes you can make here can also be made in LR itself so why bother?
You can embed the gallery itself in your own html page. Using insert, media and then finding the gallery.swf file. As long as you then upload everything in the correct locations (including the scrippt files abd the new html file in the same folder structure it will work.
There are other flash galleries that are far easier to embed available. However in order to make serious changes to flash galleries of any type you will require the original fla file and most designers are not going to give you that! Adobe does give away the fla's for the galleries that ship with PS.

Can we create a form with dreamweaver for muse

Hello,
I need help because please because I want to create a form with choices and I can't do it with muse. I would like to know if someone can tell me if i can do it with dreamweaver and insert into muse after.
Thank you for your help.

Hi creatike,
Why not use Adobe muse itself for forms?
Configuring forms (and more) in Adobe Muse
Thanks,
Preran

Where is "Structure" under Insert in Dreamweaver, I can only see "Layout"?

Can anyone tell me why I cannot see the menu with Structure under Insert in Dreamweaver, and can only see one with Layout? Any help appreciated on this. I am trying to follow the Dreamweaver tutorial "Make your first website", and am stuck on "Create the page structure" (Part 2)- as the drop down menus in the online tutorial are different to those on the Dreamweaver site that I can see on my Mac OS X 10.6.8
The tutorial instructs to find Structure in Insert but I can only see a function labelled Layout.
I managed to find a way of locating 'div' but there is not a Header in the drop down menu in Insert.
There is a list of Spry options but these are quite different to the list given in the tutorial.
Please can anyone help with pointing to where I can find the function to make a Header (as it is called in the tutorial).
Thanks.

Layout and Structure are the same tab (Category). Layout was renamed to Structure after CS6 if I'm not mistaken. See below:
Layout - CS6
Structure - 2014.1

Ccess PHP files (.ctp) in with Dreamweaver

Need to access PHP files (.ctp) in with Dreamweaver and SEO attributes. For example, want to "Insert" Meta Keywords. The files I am accessing have those fields "greyed-out" they are not available. Is there a special setup in Dreamwever to access download a website files programmed in Cake (.PHP)

Sorry for typos, Title should read: Access PHP files (.ctp) with Dreamweaver
Need to access PHP files (.ctp) with Dreamweaver and SEO attributes. For example, want to "Insert" Meta Keywords. The files I am accessing have those fields "greyed-out" they are not available. Is there a special setup in Dreamweaver to access download a website with file folders programmed in Cake (.PHP)

Git/gitHub supported or can used together (linked) with dreamweaver cs6

git/gitHub supported or can used together (linked) with dreamweaver cs6? what is version control?
server folder, web url fields,...when define a LOCAL HOST SERVER what must insert? I have XAMPP...htdocs/ win7...?

It is best to download scripts from Github and save them in your local site folder.
To set-up a local testing server in DW see screenshots below. Replace C:\wamp\www\ with xampp\htdocs
Make sure Xampp is running.
Nancy O.

Why is there unwanted white space added to all .jpg/.png when "inserted" into Dreamweaver CS4?

I have two seperate sites/seperate root folders that I am building right now and every image that I insert into Dreamweaver has an extra white space added to the left of every image. Please help, I must have checked/unchecked something in my preferences. Thank you!
Its not in my CSS or in the HTML coding...from my site:
<a href="optomized-large/Havana-Night-(66-of-312).jpg" title=""> <img src="optomized-thumb/Havana-Night-(66-of-312).jpg" width="100" height="150" alt="" /> </a>

You do know how wrong it is to make a web page that is nothing but images, right? It's on the list of the 10 worst mistakes you can make for sure.
Anyhow, look at this page -
http://www.murraytestsite.com/denver.html
I have outlined every image on that page with a 1px red border. There is no unwanted white space being added to those images. If there were you would never see the menu button images that close together. I have also put a 1px green border on the left of the container div. Note that the images are snug against that green border.

Integrating Lightroom Flash Gallery with Dreamweaver CS3

I have been unsuccessfully attempting to edit the gallery files created by Lightroom from within Dreamweaver. The index.html file comes up with this message when opened:
Sorry, this photo gallery requires that scripting be enabled on your web browser and that the Macromedia Flash Player be installed. Download the Macromedia Flash Player
However, I have the player installed...
I have tried uploading the files directly to my server from Lightroom but they do not display. The loading icon whirls endlessly and never resolves.
Does anyone have any advice.
Thanks in advance.

You can't edit a flash gallery with Dreamweaver.
To make changes to the LR flash gallery you would require a copy of the original fla file and a copy of Flash to edit it.
The index file you see is the one that loads the flash player to play your gallery. The message is what is seen in a browser that doesn't have flash player installed.
You can make amendments to the gallery itself by changing the xml files, although the changes you can make here can also be made in LR itself so why bother?
You can embed the gallery itself in your own html page. Using insert, media and then finding the gallery.swf file. As long as you then upload everything in the correct locations (including the scrippt files abd the new html file in the same folder structure it will work.
There are other flash galleries that are far easier to embed available. However in order to make serious changes to flash galleries of any type you will require the original fla file and most designers are not going to give you that! Adobe does give away the fla's for the galleries that ship with PS.

A BUG with Dreamweaver 8 when add flash button

There is a BUG with Dreamweaver 8 Chinese language version.
When I check the button "add flash button",show me a
message"There is an error,when the onChange run in Flash
Button.htm".
How to sovle the problem? Thanks.

Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"cnlomo" <[email protected]> wrote in
message
news:fk0mas$31l$[email protected]..
> There is a BUG with Dreamweaver 8 Chinese language
version.
> When I check the button "insert flash button",show me a
message"There is
> an
> error,when the onChange run in Flash Button.htm".
> How to sovle the problem? Thanks.
>

Problem with Dreamweaver & csv file!!!!

Working on website...
www.banners4churches.com
Website has special pricing matrix...
http://www.banners4churches.com/current/banners/order_custombanners.php
Excel .xml file is run through Linux Fedora 10 wKDE and cli.sh to create .csv file for Dreamweaver. The .xml file was updated and the new .csv file was inserted back into the root folder for DW. Was working properly before changes, but now it shows error message "call."
Been working on this problem for days!!!! Any help is greatly appreciated. Thank you.
Mike

tiggercald wrote:
Been working on this problem for days!!!! Any help is greatly appreciated. Thank you.
What is the problem? The pricing matrix at the URL you provided is working. If it's something not working on your local system, nobody can help unless they see the code you're working with. In any case, it sounds as though there's something wrong with the CSV file, not with Dreamweaver.

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Multi-table INSERT with PARALLEL hint on 2 node RAC

Multi-table INSERT statement with parallelism set to 5, works fine and spawns multiple parallel
servers to execute. Its just that it sticks on to only one instance of a 2 node RAC. The code I
used is what is given below.
create table t1 ( x int );
create table t2 ( x int );
insert /*+ APPEND parallel(t1,5) parallel (t2,5) */
when (dummy='X') then into t1(x) values (y)
when (dummy='Y') then into t2(x) values (y)
select dummy, 1 y from dual;
I can see multiple sessions using the below query, but on only one instance only. This happens not
only for the above statement but also for a statement where real time table(as in table with more
than 20 million records) are used.
select p.server_name,ps.sid,ps.qcsid,ps.inst_id,ps.qcinst_id,degree,req_degree,
sql.sql_text
from Gv$px_process p, Gv$sql sql, Gv$session s , gv$px_session ps
WHERE p.sid = s.sid
and p.serial# = s.serial#
and p.sid = ps.sid
and p.serial# = ps.serial#
and s.sql_address = sql.address
and s.sql_hash_value = sql.hash_value
and qcsid=945
Won't parallel servers be spawned across instances for multi-table insert with parallelism on RAC?
Thanks,
Mahesh

Please take a look at these 2 articles below
http://christianbilien.wordpress.com/2007/09/12/strategies-for-rac-inter-instance-parallelized-queries-part-12/
http://christianbilien.wordpress.com/2007/09/14/strategies-for-parallelized-queries-across-rac-instances-part-22/
thanks
http://swervedba.wordpress.com

Using PSP with Dreamweaver

Using Dreamweaver to create PSP pages can become effortless and allow developers to rapidly generate thin-client, web based applications. Anything that can be accomplished with an ASP, PHP, JSP or any type of dynamic web page that also incorporates Javascript, can easily be created with PSP.
I've proven to management at my company that given similar application requirements, writing and deploying PSP pages is a much faster development cycle. And, in ALL cases, execution time is much faster and with a smaller application footprint.
When using these scripts together with Dreamweaver you can create a Rapid Application Development environment all by using PL/SQL Server Pages.
The batch file LOAD_PSP.bat will create a PSP file from your HTM file, creates a timestamped backup copy, and loads the PSP file into the database - all fast and easy.
Copy these batch files to your development directory and create a backup directory called Backup. Simply modify these batch files by adding the service name of your database to DB_NAME and adding your development username and password to the PSP_CONNECT variables. You should also change the path of your Oracle Home for the ORACLE_HOME variable as well.
To use these batch files, simply open a DOS Window and change it to your development directory where the batch files reside. Execute the batch files with the syntax, "LOAD_PSP web_page [optional connect string]" and the batch file will execute (don't add the .htm extension).
To allow you to maintain some sense of versioning, use the CH_PSP.bat script. This script simply adds a CHKPNT extension to the file name in the Backup folder. The reason for this is that LOAD_PSP will still copy PSP backup files of those compilations that fail and these should be removed. When you application is working, you can create a "CHECKPOINT" of the PSP file that you know works. This allows you to only maintain backup copies that you know work. Simply use the syntax "CH_PSP web_page". To perform a CHECKPOINT on all files in a folder, use the syntax "CH_PSP /ALL".
To view help for each, simply run the batch file followed by a /? or /help.
In closing, challenge a Java developer to create a dynamic, web-based, database driven app from scratch and win the top 3 challenges: Development time, size of application and speed of the application. I'll bet the PSP app wins all 3 every time.
---------------- Start LOAD_PSP.bat ----------------
@echo off
REM Program     : LOAD_PSP.bat
REM Purpose     : Copies HTM file to PSP; Uploads PSP File to Database
REM Author     : Edward Girard
REM Email : [email protected]
REM Created     : August 15, 2003
REM Updated     : September 30, 2003
REM
REM Syntax     : LOAD_PSP <html file> <Connect String>
REM <html file>> - HTML file to convert. Don't include .htm extension
REM          <Connect String> - database connect string [OPTIONAL]
REM
REM Notes      : Be sure BACKUP_FOLDER exists in current directory.
REM Files must end in .htm; NOT .html
REM
REM History     : 19-AUG-03 EJG; Added Connect String Argument
REM 30-SEP-03 EJG; Create Backup Copy using date and time
REM
REM Set Environment Variables
set DB_NAME=service_name
set PSP_CONNECT=username/password@%DB_NAME%
set ORACLE_HOME=C:\oracle\ora817
set BACKUP_FOLDER=Backup
if (%2) ==() goto endCase
set PSP_CONNECT=%2%
:endCase
REM Set the DATE and TIME Variables
for /F "tokens=1-4 delims=/- " %%A in ('date/T') do set DATE=%%D%%B%%C
set TIME=
for /F "tokens=1-4 delims=:., " %%a in ("%TIME%") do set TIME=%%a%%b%%c
REM Generate Backup File Name
set BACKUP=%1_%DATE%_%TIME%.htm
REM Check if ORACLE_HOME has been set
if (%ORACLE_HOME%) == () goto nohome
REM Check for PSP Argument
REM if not (%1) == () goto no_psp_file
if "%1%" == "" goto no_psp_file
REM Load PSP Files
cls
set HTM_FILE=%1%.htm
set PSP_FILE=%1%.psp
echo. ********************************************************
echo.
echo. Creating %psp_file% from %htm_file%
echo.
echo. ********************************************************
echo.
echo. Creating Backup Copy ....
copy %HTM_FILE% %BACKUP_FOLDER%\%BACKUP% /Y
echo.
echo. Copying %HTM_FILE% to %PSP_FILE% .....
copy %HTM_FILE% %PSP_FILE% /Y
echo.
echo. Uploading %psp_file% to database .....
echo.
loadpsp -replace -user %PSP_CONNECT% %1%.psp
if not %errorlevel% == 0 goto error_exit
echo.
echo. ********************************************************
echo.
echo. %psp_file% uploaded to database Successfully
echo.
echo. ********************************************************
goto exit
REM ===========================================================
REM Error Processing
:no_psp_file
echo.
echo PSP File Argument Missing
echo.
echo Syntax: LOAD_PSP htm_file [Connect_String]
echo. htm_file - HTM file to convert.
echo. Don't include .htm extension
echo. Connect_String - Database connect string [OPTIONAL]
echo.
echo Default Connect String: %PSP_CONNECT%
echo.
goto exit
:nohome
echo.
echo ORACLE_HOME environment variable is not set
echo.
goto exit
:error_exit
echo.
echo Script Exited with an Error
echo.
goto exit
:exit
endlocal
set DB_NAME=
set PSP_CONNECT=
set HTM_FILE=
set PSP_FILE=
set BACKUP=
set BACKUP_FOLDER=
set TIME=
set DATE=
REM ======================================================================
----------------- Load LOAD_PSP.bat ----------------
----------------- Start CH_PSP.bat -----------------
@echo off
REM Program     : CP_PSP.bat
REM Purpose     : Adds CheckPoint Flag to PSP File in Backup
REM Author     : Edward Girard
REM Email : [email protected]
REM Created     : February 6, 2004
REM Updated     : February 6, 2004
REM
REM Syntax     : CP_PSP <htm file> </all>
REM <htm file>> - HTML file to convert. Don't include .htm extension
REM          </all> - Checkpoints all PSP Files [OPTIONAL]
REM
REM Notes      : Be sure BACKUP_FOLDER exists in current directory.
REM Files must end in .htm; NOT .html
REM
REM /ALL Option Copies only HTM files that have a associated PSP
REM
REM History     :
REM
REM Set Environment Variables
set BACKUP_FOLDER=Backup
REM Set the DATE and TIME Variables
for /F "tokens=1-4 delims=/- " %%A in ('date/T') do set DATE=%%D%%B%%C
set TIME=
for /F "tokens=1-4 delims=:., " %%a in ("%TIME%") do set TIME=%%a%%b%%c
REM Check for PSP Argument
if "%1%" == "" goto no_psp_file
if "%1%" == "/?" goto help
if "%1%" == "/help" goto help
if "%1%" == "/all" goto chpt_all_files
if "%1%" == "/ALL" goto chpt_all_files
REM Generate Checkpoint File Name
set CHECKPOINT=%1_%DATE%_%TIME%_CHKPNT.htm
REM Load PSP Files
cls
set HTM_FILE=%1%.htm
echo. ********************************************************
echo.
echo. Creating %CHECKPOINT% from %htm_file%
echo.
echo. ********************************************************
echo.
echo. Creating CheckPoint Copy ....
copy %HTM_FILE% %BACKUP_FOLDER%\%CHECKPOINT% /Y
echo.
echo.
if not %errorlevel% == 0 goto error_exit
echo.
echo. ********************************************************
echo.
echo. %htm_file% Check Point Token Added Successfully
echo.
echo. ********************************************************
goto exit
REM ======== Check Point All Files ============================
:chpt_all_files
echo. /ALL Selected
REM Copy Only PSP files related to HTM Files
for /F "delims=." %%z in ('dir /b *.psp') do copy %%z.htm %BACKUP_FOLDER%\%%z_%DATE%_%TIME%_CHKPNT.htm
goto exit
REM ===========================================================
REM Help and SyntaxProcessing
:help
echo.
echo.Command: Checkpoint PSP
echo.
echo.Purpose: Adds a Checkpoint token (CHKPNT) to backed up htm files
echo.
:no_psp_file
if "%1%" == "" echo PSP File Argument Missing
echo.
echo Syntax: CP_PSP htm_file [Connect_String]
echo. htm_file - PSP file to Checkpoint.
echo. Don't include .htm extension
echo. /all - Checkpoint All PSP Modifier [OPTIONAL]
echo.
echo.
goto exit
:error_exit
echo.
echo Script Exited with an Error
echo.
goto exit
:exit
endlocal
set DB_NAME=
set PSP_CONNECT=
set HTM_FILE=
set PSP_FILE=
set BACKUP=
set BACKUP_FOLDER=
set TIME=
set DATE=
REM ======================================================================
------------------ Load CH_PSP.bat -----------------

Yes, I can bring the CF administrator screen. It asked me for
a password, the one I entered during the install of CF.
No I have created a mdb database and in the administrator
screen I registered the data source.
I am using the built-in CF web server.
I was trying to create a directory for a testing web page (
just to get me started...) in my computer, tipically in the
"myDocuments" folder and then upload it to the CFweb server.
Now I am reading the CF documentation in the adobe site,
using the samples they provide.
I guess it will be a long way to learn but I will do it
Thanks
Rui

INSERT with Dreamweaver

Similar Messages

Maybe you are looking for