Inserting Images and Logos - works in the edit mode, but does not save nor show in final PDF format - help?

I have tried several times - but when I load a logo or image in to a form template - it shows up on the template in edit mode but when I save it for PDF final format and use - the image or logo disappears. What I am doing wrong?

Is this a form that you're creating in FormsCentral?

Similar Messages

  • RT target works OK in volatile mode but does not when deployed in non-volatile mode.

    I have developed several applications using the NI cRIO-9073 Integrated chassis. The applications work perfectly well in volatile mode (development), but when I come to deploy the the RT target as an executable the application does not work. Now, I ran the LabVIEW Real-Time 1 Solution application and the same problem occured, in this case, the USER1 LED came on then went off as if an error occured. I finally trapped an error around the shutdown stage, attached, funny thing is though the error code doe not make sense as I am not using the FPGA, running in scan mode, however, I could be missing something.
    (Note: I have obviously modified the Real-Time 1 course solution to use my existing hardware)
    Now this is where it gets puzzling, 3 years ago I did the old RT course, LabVIEW Real-Time Application Development, I have now run the solution for this course, on the same target as the RT1 solution and it works!!!
    I have contacted NI support with no solution to this problem. In the meatime I have a NI cRIO-9704 on order and when it arrives I will try again.
    I really need to know, however what is going on here, does anyone out there have any Ideas? have you experienced any similar problems?
    Thanks
    Neil

    Note to self - Include attachment...
    Error Log
    Status: TRUE
    Code: -65589
    Source: Shared Variable in Chamber Control.vi->RT Main.vi
    This error or warning occurred while reading the following Shared Variable:
    \\NI-cRIO9073-0180F3D1\Thermocouple Mod\Temperature-cRIO
    \\localhost\Thermocouple Mod\Temperature-cRIO
    Error -65589 occurred at an unidentified location
    Possible reason(s):
    CompactRIO:  The FPGA VI you are running does not contain the DMA FIFOs that the RIO Scan Interface requires. Ensure that the modules under the Chassis item in the project match the modules in the chassis, and recompile the FPGA VI.

  • I tried resetting my pram but now my MacBook won't startup it just stays in the grey apple symbol for 20 mins and then goes to the login page but does not login!

    Help, my backscreen keeps flickering and I got told that resetting the pram (alt ctrl p and r) might fix it. But now it won't start up at all. It was working fine befor but now just goes on grey apple screen for 20 mins then the log on page comes up but it won't log in! I don't have the original install disk. I'm not sure what to do and I can't afford to take it to the apple store. What can I do?

    See this Apple note: http://support.apple.com/kb/TS2570

  • I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
    People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
    ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
    Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
    So IMO we can divide image processing into:
    operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
    operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
    When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
    Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
    ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
    RP

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version.

    I just download and install itunes 10.5 and it worked good the first days but since yesterday it crashed up, and everytime i start it it crashes again and logged me out each time. it can´t acces my itunes account. I´m using snow leopard the last version. What can i do to solve this problem and and continue using my itunes normally?

    Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
    Do the SFC /SCANNOW again.
    If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com.  Install, update virus definition then perform a full scan.  Remove if it did find some viruses or trojans.  Restart computer.
    Back to regular windows, do the SFC /SCANNOW again.
    If that doesnot work, check to see if your Hard drive has errors or bad sectors
    GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
    Choose "Tools" tab and under error checking, click "Check Now".
    Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
    Restart windows will perform the above task to fix errors  This may take hours depends on how big is your Hard Drive
    Good Luck!!.

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

    Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

    I Just signed in to find the answer to this too.  I started having the same trouble today.

  • I bought iPhone 6 Plus few days ago and I have the following problems: 1) When entering through Safary to Google Images and tap on each on of them they do not enlarged nor I am able by click on them to enter into the connected website

    I bought iPhone 6 Plus few days ago and I have the following problems:
    1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
    2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
    I would highly apreciate any help
    Kind Regards

    I bought iPhone 6 Plus few days ago and I have the following problems:
    1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
    2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
    I would highly apreciate any help
    Kind Regards

  • I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself.  What's going on?

    I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself.  What's going on?

    He meant post it here, of course, Louie!  How on Earth would you post it "on Photoshop" ? 
    Thank you for the belly laugh. 

  • I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

    I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

    Welcome to the 'wonderful' world of HTML5 e-learning.
    In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
    Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up.

  • The edit JSP page does not appear...

    Hi!
    I make a simple JSF application, I would like to show a DB table in a h:dataTable component and edit a given row after click, but the edit JSP page does not appear. I click the on link in the table, but the list is loaded again and not the edit page...:(
    (no exception in application server console)
    Please help me!
    my code:
    **************************************** listmydata.jsp***************************
                   <h:dataTable
                             value="#{myBean.myDataList}"
                             var="myDataItem"
                             binding="#{myBean.myDataTable}"
                   >
                        <h:column>
                             <f:facet name="header">
                                  <h:outputText value="Ajdi"/>
                             </f:facet>
                             <h:commandLink action="#{myBean.editMyData}">
                                  <h:outputText value="#{myDataItem.id}"/>
                             </h:commandLink>
                        </h:column>
    ********************************* MyBean.java *******************************
    package bean;
    import java.sql.Connection;
    import java.sql.SQLException;
    import java.util.ArrayList;
    import java.util.List;
    import javax.faces.component.html.HtmlDataTable;
    import javax.faces.context.FacesContext;
    import javax.naming.InitialContext;
    import javax.naming.NamingException;
    import javax.sql.DataSource;
    import wrapper.MyData;
    public class MyBean {
         private List myDataList;
         private HtmlDataTable myDataTable;
         private MyData myDataItem;
         protected Connection Conn;
         // *********************** actions ***********************
         public String editMyData() {
              myDataItem = (MyData)getMyDataTable().getRowData();
              return "editmydata";
         public String saveMyData() {
              try {
                   updateDataInDB();
              catch (SQLException e) {
                   System.out.println(e);
                   System.err.println(e);
                   e.printStackTrace();
              catch (NamingException e) {
                   System.out.println(e);
                   System.err.println(e);
                   e.printStackTrace();
              return "listmydata";
         // *********************** setter ***********************
         public void setMyDataList(List myDataList) {
              this.myDataList = myDataList;
         public void setMyDataTable(HtmlDataTable myDataTable) {
              this.myDataTable = myDataTable;
         public void setMyDataItem(MyData myDataItem) {
              this.myDataItem = myDataItem;
         // *********************** getter ***********************
         public List getMyDataList() {
              if (myDataList == null || FacesContext.getCurrentInstance().getRenderResponse()) {
                   loadMyDataList();
              return myDataList;
         public HtmlDataTable getMyDataTable() {
              return myDataTable;
         public MyData getMyDataItem() {
              return myDataItem;
         // *********************** others ***********************
         public void loadMyDataList() {
              try {
                   getDataFromDB();
              catch (NamingException e) {
                   System.out.println(e);
                   System.err.println(e);
                   e.printStackTrace();
              catch (SQLException e) {
                   System.out.println(e);
                   System.err.println(e);
                   e.printStackTrace();
         void getDataFromDB() throws NamingException, SQLException {
              myDataList = new ArrayList();
              java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement("SELECT id, name, value FROM BEA_JSF_SAMPLE");
              PreStat.execute();
              java.sql.ResultSet Rs = PreStat.getResultSet();
              while(Rs.next()) {
                   MyData OneRecord = new MyData();
                   OneRecord.setId(Rs.getLong(1));
                   OneRecord.setName(Rs.getString(2));
                   OneRecord.setValue(Rs.getString(3));
                   myDataList.add(OneRecord);
         void updateDataInDB() throws SQLException, NamingException {
              String sql = new String("UPDATE BEA_JSF_SAMPLE SET name=?,value=? WHERE id=?");
              java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement(sql);
              PreStat.setString(1,myDataItem.getName());
              PreStat.setString(2,myDataItem.getValue());
              PreStat.setLong(3,myDataItem.getId().longValue());
              PreStat.execute();
              ownGetConnection().commit();
         Connection ownGetConnection() throws SQLException, NamingException {
              if (Conn == null) {
                   InitialContext IniCtx = new InitialContext();
                   DataSource Ds = (DataSource)IniCtx.lookup("JDBCConnectToLocalhost_CRS");
                   Conn = Ds.getConnection();
              return Conn;
    ******************************* editmydata.jsp *****************************
    <%@ page language="java" contentType="text/html;charset=UTF-8"%>
    <%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
    <%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
    <html>
    <body>
    <f:view>
    <h:form>
         <h:panelGrid columns="2">
              <h:outputText value="Name"/>
              <h:inputText id="name" value="#{myBean.myDataItem.name}"/>
              <h:outputText value="Value"/>
              <h:inputText id="value" value="#{myBean.myDataItem.value}"/>
         </h:panelGrid>
         <h:commandButton action="#{myBean.saveMyData}" value="Save"/>
    </h:form>
    </f:view>
    </body>
    </html>

    I have put his lines in the faces-config.xml and now it works:
         <navigation-rule>
              <from-view-id>*</from-view-id>
              <navigation-case>
                   <from-outcome>editmydata</from-outcome>
                   <to-view-id>editmydata.jsp</to-view-id>
              </navigation-case>
         </navigation-rule>
         <navigation-rule>
              <from-view-id>*</from-view-id>
              <navigation-case>
                   <from-outcome>listmydata</from-outcome>
                   <to-view-id>listmydata.jsp</to-view-id>
              </navigation-case>
         </navigation-rule>
    I don't understand, that I define the next JSP page in the bean java file, which must be shown, but I must define this in the faces-config.xml as well.
    for example:
         public String editMyData() {
              myDataItem = (MyData)getMyDataTable().getRowData();
              return "editmydata";
    is it right or Do I make a mistake somewhere?

  • When i try to send a message to more than 1 person it tries to go out and comes up in the blue box but is not delivered?

    When I try to send a message to more than one person it tries to go out and comes up in the blue box but is not delivered. I phone 4s?

    Hello blee136,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Best of luck,
    Mario

  • HT1657 Downloaded 2 rentals and they won't play. They ask if I would like to begin the rental period, I say yes and it takes me to the dvd screen, but does not play. I hit play, fast forward, skip chapters and nothing.

    Downloaded 2 rentals and they won't play. They ask if I would like to begin the rental period, I say yes and it takes me to the dvd screen, but does not play. I hit play, fast forward, skip chapters and nothing.

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Hello I have purchased a iphone 5s from a customer and forgot to give me the email and password and if placed in the phone sim card does not open because he wanted to email and password, what do I do in order to open the iPhone please help me :(

    how to remove activation lock  :Hello I have purchased a iphone 5s from a customer and forgot to give me the email and password and if placed in the phone sim card does not open because he wanted to email and password, what do I do in order to open the iPhone please help me

    You just made a very expensive mistake, especially if you can't return the phone.

Maybe you are looking for