InsertRow does not show the inserted row on the view
hello:
The code below works well and shows the row on the view when added. However, when there are several existing rows and I have to scroll to next pages. an insert button on that page does not show the new Row at all. Is there a way for me to see the row even if I scroll over to the last page and try an insert?
ViewObject myVO = this.getMyView();
Row newRow = myVO.createRow();
newRow.setAttribute("Id", myId);
myO.insertRow(newRow);
Thanks
Hi,
I also have problems with code above for inserting a new row.
When I insert a new row in a table and click on column header (to change sorting), that row (and any other new row before committing) disappears from table. And if I commit that table (without missing row), the missing row reappears with next refresh.
Selection in that table (using SelectOne component with Autosubmit=true) also doesn't work with new rows (with existing rows it works fine). Selection allways sticks on first inserted row!
Something weird is happening here...
Please help.
Similar Messages
-
what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?
If the iPhone was unlocked unofficially, it has been locked to original carrier again.
-
Why this query does not show the result?
Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID OWNER OBJECT_TYPE
69662 HR TABLE
OE SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYSHi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl -
Field Explorer in Crystal Reports does not show the same names as Bex Query
Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advanceHi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo -
I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?
iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.
-
Report does not show the main section while calling from forms 6i
Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advancecan you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report
-
my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?
I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts -
I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation. -
ME23n , Does not shows the values correctly in print preview
Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandibIt turns out that this problem went away after the program crashed. Everything seems to be working well now.
-
Acrobat Pro "save as" function in the file menu does not show the current directory of the file
I have installed CC but Acrobat Pro gives me headaches.
The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
I use Windows7 professional 64bits.I use what seems to be the latest version available on the Cloud:
To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
So here it is, open:
When I do a "Save as", it takes me to a totally different place on the disk!
Very annoying...
Thanks for your time!
JJ -
My playlists show how many titles are in the playlist but does not show the list of titles
my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?
Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
tt2 -
I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??
If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed. -
' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?
mardemar wrote:
... - the only one without an x delete button.
What is the name of this App and where did you get it...? -
File name does not showing the InDesign icon?
I have got few files from my client and they said it is an InDesign CS2 version file. but the file name does not showing the InDesign icon on the file name, though I have CS2 and I have tried other version too.
Also I could not open the file in any version.
Can somebody help me?there is no screen shot...
You must either post a link to it on another server or embed it into a post using the camera icon on the web page like this: -
appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?
ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped
Maybe you are looking for
-
I was trying to get the new iOS update, and the iPad froze. I've seen others who have the same problem, but they had the iCloud and things like that. I have a few stories on there, and I'm not about ready to lose them, as I was stupid enough to not t
-
Report to create subopportunity
Hi EXPERTS, i have one requirement that, to write a report program to create subopportunity under one master opportunity and maintain link between this. Please help me to solve this? Thanks in advance, Saju.
-
Message Mapping, filling field with 0 (zeros) on left
I need to fill a field with values that has variable lenght adding 0 (zeros) on the left, how can I do it ? I'm using the LENGHT in message mapping, with value returned by LENGHT I use FIXVALUES to map the quantity of 0 (zeros) that I need to add in
-
Material's Unit of Measurment differentin Con & Rec due to Prd Process ?
Hi We got some byproduct due to the production. So we are planned we will take qty in m2 & stock maintain in kg, because this is child material of another one product, so that time we consumption book in kg wise only u2026. Finally we want: R
-
RMI Registry as a service.
I have found evidence that supports the possibility of rmiregistry.exe running as a service on windows, but I have not found any "How-To" for it. I wrote a batch file to run the command: sc create "RMI Registry" binpath= "c:\Program Files\Java\jdk1.6