Inspection after inbound delivery( VL31N)  before GR( MIGO)

Hi Qm Guru...
My client senior is after PO they do inbound delivery T-code VL31N. then Migo (GR).
1)My client want after the inbound delivery there they want to quality  inspection (inspection lot may be manual or auto)..after the inspection they can do the MIGO. (GR).
.2) there should be check GR before inspection .they can not do GR before UDu2026
Another matter is this suppose 50 kg he has don inbound delivery 40 kg is ok and 10 kg  return to the vendoru2026
When they are doing GR only 40 Kg will be  allowed for GR
Kindly suggest me how I will do this  pls step by step
Regards
Aqueel

Hi QM guru...kindly suggest me...
How i will block GR from Vender .befor UD? and above requirments also
Regards
aqueel

Similar Messages

  • Need help to create I/b Delivery(VL31N) and GR (MIGO) against to PO

    Hi ABAPers,
    Please give me BAPI/FM to create inbound Delivery(VL31N) and Goods receipt (MIGO) against to PO.
    And please tell me the fields( which i need to pass to each BAPI/FM) to create successfully.
    my assumption is :
    inbound Delivery(VL31N) : GN_DELIVERY_CREATE
    Goods receipt (MIGO)    : BAPI_GOODSMVT_CREATE
    Please confirm.
    Thanks and Regards,
    Sekhar.

    anyone?

  • How to make Classfication entry pop up at Inbound delivery VL31N?

    Dear All
    I need to have the characteristics values of the class assigned to my material POP UP during the Batch Creation in Inbound Delivery (VL31N)
    I have activated the necessary config and the batch number is able to generated successfully. However, the characteristic value does not pop up to ask me for entry.
    I have also tried to make the characteristic value as Required Entry but it still does not pop up to ask me for entry, instead it just shows a general message as follows:
    Status changed: missing values for required chars in EFASH12Z          0000001053
    Message no. CL500
    Diagnosis
    You want to save an allocation to a class with released status. However, the class contains characteristics for which an entry is required.
    System Response
    The system changes the status of the allocation to incomplete.
    Procedure
    If you want to save the allocation with released status, first you must assign values to all the required characteristics. Then you can set the status you require.
    Please advise. Thanks.
    Point will be rewarded handsomely.
    Edited by: Daimos on Nov 3, 2008 9:43 AM

    Dear all
    Hi, I have maintained the value as 3: Batch Installation, Classificaiton and SLED Check in the config
    SPRO > Logistics Execution > Shipping > Deliveries > Define Batch Creation Controls in Inbound Deliveries. However, the Inbound Delivery VL31N are able to create batch but not able to create classification.
    Batch Creation of Inbound Delivery (as shown follows) allows us to create batch during inbound delivery.
    [Batch Creation of Inbound Delivery|http://img512.imageshack.us/img512/5332/inbounddeliverywithclasqd5.jpg]
    However, Classification of this Material does not pop up as follows, and there is no Button to click for classification:
    http://img512.imageshack.us/img51[classificaiton Tab not appeared at all|http://img512.imageshack.us/img512/2995/inbounddeliverywithclaslh5.jpg/]
    Full marks will be awarded beautifully.
    Thanks

  • Finding FM/BAPI/RFC for Create Inbound Delivery(vl31n).

    Hi all,
    i need for a FM/BAPI/RFC for Create Inbound Delivery(vl31n) or ASN
    where in import Parameter i have to pass -
    *vendor no*
    *PO no*
    *External ID no*
    *Delivery date*
    *TransPlanngDate*
    *BillOfLad*
    *GR/GI Slip*
    in Export i need ASN no and in tables we can use ITEM details.
    Regards,
    Sunil sahoo.

    Hi,
    Check the below link
    [https://forums.sdn.sap.com/click.jspa?searchID=16938983&messageID=5780492]
    Regards,
    Surinder

  • Authorization  in purchase order(ME21N) and inbound delivery(VL31N)i

    I have the following scenario and requirement:
    there is a customer adopt concentrated procurement. the headquarter create purchase order and the branches create the inbound delivery. all the data including company code, purchase organization, purchase group and the plant are same except the information of goods receipt person we put in header text field.
    now i want to control the authorization in VL31N depend on the goods receipt person or something related, how can do this? please kindly let me know?

    Hi,
    You can use the storage location or shipping point as authorization control, these two should be different for different locations.
    Regards,
    Ramakrishna

  • Create inbound delivery VL31N

    HI,
    I have created new plant. When I make PO (UB) and then create inbound delivery in vl31n the vendor already appears and the vendor is what I entered in the PO as Supplying Plant.
    Now when I do the same for the new plant the vendor does not appear automatically. What I forgot to customize ?
    Thank you.

    Hi ,
    Greetings!
    Generally, the vendor number is not populated to the PO/inbound delivery for intra company stock transfer.
    However, if you to the following settings, the vendor number will be populated to the intra company stock transfer PO and subsequently to the inbound delivery.
    SPRO -- > MM -- > Purchasing -- > Purchase order --> Define Document Types --> You have a check box "Stock transfer: Take vendor data into account". Check this.
    Now if you create a new stock transfer PO with document type UB and create inbound delivery, you should get the vendor number.
    Regards
    Gobinathan G

  • Inbound Delivery VL31N

    Can any one pls tell in which case i have to do Inbound delivery??
    Do i have to do Inbound delivery every time when i purchase materials  before doing GR??
    Or in which particular case i have to do Inbound delivery??

    Hi Chandra shekhar sir,
    Here what i understood is Only if i do Inbound delivery then system will calculate these stocks(on order stock) while doing MRP run.
    For eg
    today i Raise PO for 100 qty (18/06)
    Tomorrow Vendor will give assurance that within 25th i deliver the goods
    So if i run MRP on 24th system will calcualate this 100 qty also during that and raises PR for Remaining Qty
    Is there any specific Report to track that the Vendor have assured to deliver the Goods by this date.
    Is is Right sir???
    Regards,
    Praveen

  • Error in IDOC creation of Inbound Delivery (VL31N) with  Error Message Number VL561

    H,
      I'm getting an error message when generating a test IDOC of Message type DESADV and IDOC type DELVRY03 to create Inbound delivery with reference to a standard purchase order.
    Essential transfer parameters are missing in record: PO Number and Item
    Could you one help me out in solving this.
    Thanks,
    Raj

    Hi ,
    Goto SM13 .
    Find the terminations based on user and creation date.
    Get the same analysed by ur ABAP team.
    Also check the confirmations in PO at Item level.
    Regards
    Ramesh Ch

  • Change in PO Qty. after Inbound Delivery.

    Hi,
    Suppose against a Purchase Order  an inbound delivery of 100 pc. is created(PO Order Qty. is also 100).
    Once a delivery is created,then Iam change the PO qty. from 100 to 80(System only throws an info message ME545,which I tried to convert it into error,but still it throws an info.).
    Why system is allowing me to change the PO qty?Kindly advise.

    system will allow changes for all PO qty untill and unless the item is bloced or deletion indicator is set. the system will not stop changes to qty even if you recieve full qty of material.
    the only way to stop is to make use os user exit as prescribed by Charlie
    vikrama

  • Batch split in inbound delivery VL31N / VL32N

    Hi,
    I am using standard function GN_DELIVERY_CREATE in order  to create inbound delivery document, it works fine, but it doesn't allow to specify batch split!
    So, in order to enter a batch split I have as first create the delivery with this standard function and then enter in VL32N and create the split through batch input.
    I am experiencing a lot of issues using batch input in VL32N (same thing with VL32), I need to avoid the call transaction, is there someone that have solved this problem through a BAPI or some other standard function that allows to create batch split?
    Thank you in advance
    Alessandro

    use BAPI: BAPI_OUTB_DELIVERY_CONFIRM_DEC
    I used this long time back. it worked fine.

  • Issue with Transfer order after inbound delivery

    HI SAP Experts ,
      we have an issue where User inputed the Inbound delivery and then assigned with Handling Unit and then he has Created the Transfer order and which he has confirmed
    later he has Unassigned Handling Unit , know how can he  Proceed further
    Case   1) I believe he has deleted the Inbound delivry also , How then the Transfer order Movements can be    reverted
    Case 2) inbound delivery exist in system , in unassigned state wrt Handling unit and Transfer order (Confirmed )also exist , if user Tries for vl09 for Reversing Delivery , system throws error , Reversing not possible -What should be done here
       Awarded Full  Points for correct answer
    Thanks and Regards
    Adarsh

    Hi
    You use LT01 with the reverse movement (1 or 10 higher than the  production receipt - standard SAP uses 103 fro GR and 104 for the reversal).
    You then want to unprocess the transfer requirement if existent (look up the TR number in the TO header)
    And cancel  VL09 and then TA LT0G

  • Trigger IDoc DELVRY03 after Inbound Delivery create

    Hi,
    Inbound delivery is created through an Inbound IDoc and I want to trigger an outbound DELVRY03 IDoc when the Inbound Delivery is created.
    How do I trigger this?
    Regards,
    Sneha

    You have to setup output control,let me say one example
    when you create delivery ,then immeditely output type will trigger LD00,you need to set up partner profile ,according to that outbound idoc will trigger.

  • VL31N followed by MIGO

    I am doing Goods Receipt using Inbound Delivery(VL31N) followed by MIGO.
    - While going VL31N, the material gets posted to Blocked stock (Mvt Type : 103) automatically
    - After this I post the Goods receipt using VL32N
    - Now when I try to 'Release the GR Blocked stock using MIGO & Mvt type 105, it throws the message 'You have no authorization for Special stock type '.
    Please suggest a way out of this.
    Regards
    Shailesh

    execute SU53, print it and go talk to your Security team.

  • After reversing the Inbound delivery in VL09, lock in LT0G

    Hi,
    I am canceling a Inbound delivery (Plant - WM managed) thru VL09 and then trying  return to stock using LT0G.
    But I am getting lock, unable to reverse stock/TO , and the log says " Scheduled quantity exceeds available/picked quantity ".
    LS24 shows no stock available for the material in the Storage type,
    but surprisingly this LT0G some times works fine & some times show this lock and unable to proceed further.
    What is the setting or process missing? are we not suppose to use VL09 and LT0G subsequently?
    Is there any other better way to do this? and what is the proper way to do this?
    Appreciate your suggestions to either unlock the item or reverse the stock or unpick the qty in the Inbound delivery.
    Thankyou,
    Ravi

    Hi Chris,
    Please find the detailed process steps in my scenario
    Creation process:
    1. Create Inbound delivery : VL31N & save it.
    2. VL32N- and then subsequent function- create TO & save it.
    After confirmation of the TO, the below happens in background.
    TO - Putaway the stock from 902 to 011 storage type.
    3. VL32N - PGR.(Post Goods Receipt)
    Cancelation process:
    Successful Example: (pre-existing stock)
    1. VL09 - Cancelation successful
    2. LT0G - Successful.
    Before PGR: LS24 Stock
    Inbound delivery qty =1
    After TO created.
    After TO confirmed
    After PGR :LS24 Stock  (Before VL09)
    After VL09
    After LT0G successful
    After the TO is confirmed
    Status overview screen

  • MIGO to receive by PO or Inbound delivery number?

    HI,
    I've created a Inbound delivery with 2 line item for a PO. Then do MIGO receipt by Inbound delivery number.
    In MIGO screen, only 1 line item display. It supposed 2 line item (inbound contain 2 line item).
    So far, I havn't receipt any for this PO. Please advice.
    1. Why MIGO only display 1 line?
    2. If I receive by using PO number, is any impact on my Inbound delivery?
    Thanks

    Hi,
    If 2 line item are same material then in MIGO consider only one line item of the Goods receipt. Because the Inbound delivery of 2 line items u are receiving on the same posting date.
    MIGO only look wether you are recing parcial or full order qty. If account assignemnt category or Multiple storage location then you can divide that in the same multiple line items.
    SAM

Maybe you are looking for

  • Ran out of storage space

    Recently ran out of storage space on my laptop, where I have been storing all music/videos purchased from iTunes. The music library points to a location in the hard disc of the laptop. Now that I have no more space on the internal hard disc I acquire

  • USB 1.1 iPhone Problems

    *THE SITUATION* Well, when I first got my iPhone (about 2 weeks after it was released) I had tons of problems connecting my iPhone to my computer which only features 3 USB 1.1 ports, and no USB 2.0 ports. The phone wouldn't be recognized at all, and

  • GPS project

    Hello, following the recent keynote, I'm delighted to see the GPS as part of the specs. Especially since I worked the past week on a new project http://www.sharepoz.com/en/ It's a website that stores GPS positions of users and provides an API to send

  • Ondemand Script is failing in oracle documaker 12.2

    We just upgraded from oracle documaker 11.3 to 12.2. When we try to generate AFP file, ondemand script is failing in 12.2. It is failing in Gen print. GenPrint Transaction Error Report - System timestamp: fri sep 26 09:24:12 2014 DM17115:  Warning :

  • Can't see MacBook under Manage Devices in Apple ID?

    I would like to add my MacBook Pro with Retina Display under iTunes in the Cloud under Account Information in iTunes Store, but can't seem to be able to. Or is there any way I can associate my MacBook with my Apple ID so it appears in my Apple ID inf