Inspection Characteristic in the material master (Classification)

Dear All,
Please anyone tell me the cycle for maintaining the characteristics in the material master (classification tab) using batch classification.
or give me a link for the same.
regards,
Rishabh

Hi Rishab,
Below links can help you
http://help.sap.com/saphelp_470/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/content.htm
http://scn.sap.com/thread/1783839
http://help.sap.com/saphelp_470/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
http://scn.sap.com/thread/2046143
http://help.sap.com/saphelp_46c/helpdata/en/2d/350a19448c11d189420000e829fbbd/content.htm
below steps will help
Creation of Batch Class in (CL01)
Assignment of above created classed characteristic to the Batch Class at the time of class creation. (CL01)
Assignment of batch class to material master in classification view. (MM01)
Creation of MIC with reference to above created Class characteristic (QS21)
Creation of inspection plan with above MIC (QP01)
Follow your business process cycle for creation of inspection lot
Result recording and usage decision (QA32)
You can see in MSC2N that batch characteristic will get updated.
Best regards,
Sharat

Similar Messages

QM: Inspection Setup in the Material Master

Hi all!
A quick novice user query: In SAP ERP Quality Management, I was creating an inspection lot for a material and it prompted me to first add an inspection type for it. I went to the Inspection Setup in the Material Master, entered the material, the plant, check activate inspection, selected an inspection type and hit execute. But it keeps giving me "No entries found". Any help?
Thanks a bunch in advance!
Regards,
Bilal

Your query does not provide complete info as to what type of inspection origin you're trying.
Anyway as a thumb rule ensure that the setup in material master exists, i.e. the relevant inspection origin type. Ensure the tickbox for active exists. Also the corresponding data such as inspection plan / material characteristic etc. exists along with the required setup.
Once the above is in place you can proceed with the QM flow. In addition to this I would also suggest do a search in QM forums to know more about how to maintain the data, what needs to exist etc. Also go thru' SAP help.

Default inspection Type In the Material Master

Hello
We have to assign two -three inspection types in the material master. How to default this inspection types in the material master always .
Thanks
JJ

Dear JJ
This you will have to do by putting validation in the material master. I dont think you have a standard solution for that.
Or esle you can run QA08 wherein you can assign inspection type enmass.
Please let meknow your feedback
Regards
Gajesh

Usage of 'Average Inspection Duration' in the Material Master QM view?

Hi,
facing user requirements that you should be able to consider the QM stock in the ATP calculations in a special way, I want to have some feedback re the usage of this Material Master field. The user actually would like to have the parts available in the Sales Order scheduling line after a specific number of days, when having run the ATP job. The ATP Config is set to include QM stock in the run (and they do not want to change that), so presently the system promise deliveries in the SO, but it can not be done! Nice solution should have been the for instance set a delivery after the planned number of days for inspection as set in the MM QM view! The only usage I have seen so far of this field is that the planend insp date range is visibale alike in tr code QA32, but that is more admin info, not causing hands-on effects.
So two questions:
What hands-on effect does this MM QM field entry have in R/3?
Any suggestion how to solve this user wish re ATP logic??
Best regards / Roland

Set all the parameters for certificate creation
QM in procurement define keys for certificate processing
<b>Certificate type</b> will define the following controls
Certificate for each PO/GR item
Check on certificate check required
Set control w/o certificate FIELD as E
Enhanced cert processing tick on.
DO the GR with certicate received no
See the status of insp lot CTCM- certificate conf missing
But you cannot do GR as it is disaloowed
Proceed as below
Goto QC51 and give PO and item no and click ok
Select the appropriate line and click copy
Here you change the certificate status that 5 i.e. certificate field and inspected, mention the certificate date and save
Now see the status of insp lot CROK- certificate receipt confirmed.
Now do UD, it will go through.

Change History of Material master classification data

Dear all.
How can we see the change history of the Material master classification data.
Whether any standard report exists which can give this Change History data or whether we can find from any tables?
Please let me know your thoughts on this
Regards
Shyam

changes in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
change history for classification is only stored if you activated this.
if it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system
it has instruction how to active it.

Legacy number in the material master

Dear SAP Guru,
Good day.
We are currently in production support today and we want to understand how a legacy number differs from a material number. As we can see in the material master (Classification View) there is an indicated legacy number there with a corresponding value. Could you further elaborate on how and what is the usage of a legacy number?
Thanks in advance for your help.
Kind regards,
JMT

Jasmin,
Basically some clients would be interested to track the SAP material number with referance to the Legacy material number, this data would be uploaded during the Cut-over and data conversion to SAP.
I would suggest you look at the Functional/Tehnical specification document for the conversion program which was used for uploading the material master data into SAP, that would give you the business reason and the field mapping details.
Regards,
Prasobh

Tax classification field of the material master - Mandatory

At the "Sales: sales org. 1" view of the material, there exist the tax classification field of the material master. How can I make this field mandatory?

Hi
Go to T-code OMSR
Select Field name MARA - TAKLV and click on the arroow sysmbol on the right against that line.
For Field Ref MM01 - select the radio button "Reqrd Entry".
Hope this answers your question
Regards
Madhu

Inspection type's maintained in the material master

Hello,
I want to know the transaction code using which I can check the inspection type's maintained in the material master.
I do not want to go per material put in mass. I know that I can pull the data from tables but i do not want that.
I want the standard SAP transaction code.
Regards,
Narendra Bora

Well, you could make the argument that using SQVI to create a query and making this report available to select users is not really development. It is a standard SAP transaction and users can be limited to only running certain queries. Groups of queries can be created and users assigned to groups. By adding variants that users can't modify and locking certain fields in the variant you can limit the queries to a maximum number of records. Usually the argument is that a user will create a massive query or set values that return too many values. Both of these concerns can be addressed.
I don't think a lot of people understand the full capabilities of SQVI. You don't have to give users unlimited access to the transaction!
If there was a "standard" report or transaction for what you want, I think between Sujit, and myself, we would be aware of it. It is a common requirement during go lives to have to review inspection type setups. I would hope by now we would have run across it.
FF

Open field for cost center on the material master

We have a unique requirement in a facility we intend to implement plant maintenance in to track a cost center to a material by including the cost center on the material master somewhere. Cost center is not a field on any of the material tabs we use for maintenance materials, but the requirement is just that it is tracked in a field, even if it's just an open field like a "user defined field" or another field not used often. We realize there are disadvantages such as the field not being checked against active cost centers, but we are looking at options short of adding cost center as a field manually to a tab (which I believe would require ABAP assistance). I don't think there are any other fields/tabs we are currently not utilizing but I could be wrong... The best option we can think of is adding it in a material characteristic so it shows on the classifications tab, but I thought I would see if anyone has any other ideas.
Thanks

Not sure what is the need of cost center on material master when you want to implement Plant maintenance module. Do you have any specific requirement for this?
Ideally cost center will be derived from either functional location/ equipment (equivalent of material master) on to PM work order or notification.
Can you elaborate the requirement?
After all if you wish to go with cost center, then I suggest it should be at plant level as PM requires plant level distribution. You can add up a custom field and give the reference of cost center data element with help of developer.

Change documents of material master classification class type 001 and 300

Dear guru ,
I want to see the history of change documents of material master classification using MM02.
The system allow to see the history only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
I must do some settings or the function for these class type arenu2019t available ?
Thanks.

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

Pricing based on Material Master Classification

Hi Guru's,
Can we have a pricing based on material master classification.
Scenario: Material can have few characteristic. If we select few of the classification, this should influence pricing.
Any idea on this, has anybody worked on this before?
Thanks,
Anil

I am not sure about classification, might work with Variant Config.
Alternatively, you can use split valuation if you don't have many characteristics.
Hope this helps-

Tracking changes in the material master

Hi All,
I have a material master 123456.
In this I have batch_class 023 type. I have a characteristic COLOUR which is assigned to the batch_class.
For this characteristic there are 2 options RED and BLACK.
When I created the material master I had assigned RED colour. I did some transaction also.
After 2 days when I went inside the material master, I found BLACK insteadof RED.
I want to know who did this changes? I am not able to track this from the mm03--material master changes.
How do i track the changes?
Regards,
Narendra Bora

in MM04 i think you may not be able to find the classification changes.
i wouls suggest you to activate change logs on AUSP table a prerequisite of change logs is activating multi object assignments. This entails running program RCCLUKA2 which converts KSSK and AUSP to internal number (more information on the program/procedure can be found in the documentation of the program).
this can help you to find the change log on the classificaiton values.
Pravin Mukkawar
TCS canada

Batch Determination in SD - Need for Material Master Classification View

Hi!
Is it mandatory to have the classification view of the material maintained to enable expiry date based batch determination at delivery creation?
I have configured BD for the delivery. When testing with a material for which the classification view is maintained, the batch is determined. When testing with a material for which the classification view is <b>not</b> maintained, the batch is not determined.
Appreciate that this may seem like a strange question given what the testing shows but I am working with a colleague who is adamant that the classification view on the material master is not required.
Any casting votes would be much appreciated and rewarded accordingly. Thanks, Duncan

Classification of batches is mandatory if you want to use the batch determination feature.
source: http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b8bd043ad11d189410000e829fbbd/frameset.htm

Material Master Classification view

Hi all,
I have some doubt in Material Master Classification view.
I want to know the Database Table name in which the field Class Number
is stored.
I know that these tables are stored in the stucture ( RMCLF
) during creation of material master.
Thanks in advance

KLART is for Class Type & not for Class number ...
also i need the table where i can see it ...
Thanks in advance

Characteristics in the material master (SAP Retail)

Hi everybody,
Iu2019m using SAP Retail and I need to maintain characteristics in the material master. These characteristics are used to maintain additional information like u201Caccessoriesu201D and u201Cguaranteeu201D (Iu2019m not working with generic articles and variants).
Each characteristic need to be maintained in different languages:
Example: Guarantee u2013 In Portuguese the value should be u201C2 anosu201D and in English the value should be u201C2 yearsu201D.
There are no predefined values for these characteristics. We use additional values and the user can maintain a free text, but it should be different in Portuguese and in English.
One solution I can use is to create each Characteristic in English and in Portuguese, and then maintain different values for each one. Iu2019m trying to find a better solution because I have numerous Characteristics.
Does anyone know another way to solve this issue?
Thanks in advance,
SN

Hi SN,
this requirement sounds a little bit strange.
Question 1: This field 'Guarantee' is valid for all articles or for some articles only ( e.g merchandise categroy electronics)
Question 2: How do you name the Characteristic? is it Years or Ano or guarantee?
Question 3: using additional vlaues will kick out the value check. So it is like a free text entry. Of course this makes no sense, because you can also add 'g hello' als a valid value.
Why you choose this way ?
Question 4: What is the issue using fixed values? I guess the guarantee values are limited at all.
Question 5: Why you don't use a MARA append field and hide it on unwished mechandise categories. Thats easier to handle and a value check can be implemented. So you are able to create a field with a unit in different languages
e.g. Guarantee Years
if you logon in english.
regards
Björn
PS: Did you tried the new characteristic strorage?

Inspection Characteristic in the material master (Classification)

Similar Messages

Maybe you are looking for