Inspection Type - Default Values - Inspection for HU

Hi Gurus:
In SPRO >QM > QI > Insp. Lot Creation > Define Default Values for Inspection Type
I am trying to check the Inspection for HU box under the Inspection Lot Creation section.  It checks fine, but when I save, the check disappears.  I have others where I have set this, so I am unsure why it is not letting me.  There is no error message appearing...Only the check disappears upon Save.
Thanks for your help in advance.
Nic

Hi
U r right. This is Happening to the Insp types 05 and 08 as per the coding written in the standard Program. It is checking the Insp lot origin in the table V_TQ33 and clearing the Tick for the Inspection for HU field if the insp lot origin is 05 and 08 while saving.
Regards
Brahmaji

Similar Messages

  • No Default Value Maintained for Operation

    Hi Experts,
    System is showing an error when we are trying to create the process order, hence we are unable to create the process order.
    When we save the process order, system is showing below error:
    " No Default Value Maintained for Op.generation for order type xxxx (mat XXXXXXXXXXXXXXXXXX)"
    We have searched the existing threads, as per them we have checked all the check points like Master recipe, Production version Validity, Control keys, all are available with available validity dates.
    Once Master recipe is there, still system is looking for the default value for operation, this is something which is confusing us.
    Can you please guide us to resolve this issue.
    Thanks in advance.

    Hi Raj
    For some reason your master recipe is not being selected. Generally, this is caused by status, validity, production version or customizing.
    If you have created the recipe with a change number, check if a released is assigned.
    Also, since you mentioned that you already checked averything, you may try to create a new master recipe.
    BR
    Caetano

  • How to set a default value of " " for a VARCHAR2 in ER diagram?

    Hi,
    I am trying to set the default value of a VARCHAR2 attribute to " " (space) in an ER diagram. But it just thinks I don't want anything for the default value. If I specify CHR(32) will it work? or is there another way? Will I have to wait until I get into the server model to do this, if so how do I do it there?
    thx
    adam

    Are you sure you want the default to be a space, not a NULL? VARCHAR2 fields want to trim spaces from the right, which makes them NULL if they started as all spaces. You can force them to accept spaces, but it is an unnatural condition. Even the VARCHAR2 columns that I use as surrogates for booleans I set as 'Y' for true and 'N' for false, or 'T' for true and 'F' for false. Occasionally, it will be 'X' for selected and NULL for not selected, but the NULLs tend to cause trouble so I avoid them.
    Okay, let's assume that you have a good reason to default to a space. Use ' ', including the single quotes. When you transform to a Table Definition, change the Default Value Type for the column to a Database Function Call. You can't do that in the logical (Entity/Attribute) design, only in the physical (Table/Column). That will make sure that the Server generator will leave it the way you wrote it.

  • FRA1 condition type default value as 0.01 INR

    Hello gurus,
    Can anybody let me know how can we made default value as 0.01 INR/KG for  FRA1 or any other freight condition type while creating standard NB type P.O.( with out any user exit function)
    it is just like personnel settings defaults...
    Rewards for useful information
    Thanks
    Mohan

    You can maintain the condition FRC1 as 0.01 INR/Kg in info record for a particular Material-Vendor-Pur Org-Plant combination. But u cannot maintain any condition for Doc type.
    thx
    Amitava

  • Default values set  for Tax data in material master

    Hi
    Can anyone tell me how to set default values for  TAx dat in sales view  while creating material master.
    so that it automatically take  values while creating material master.
    Regards
    Vijay Shukla

    Mary and Vijay,
    I probably understood your question wrong.
    I was somehow assuming you were referring to classification data.. Sorry abt that.
    The tax data gets populated automatically while creating the material master.
    Th key lies in configuration..  You would have to use Tcodes OVK1, OVK4 to define the material and the tax categories by country
    The tax data is populated by the assignment that you make in OVX6.. I believe.. assigning plants t Sales org. Th country code defined in the plant OX10 is used to determine the tax data and once you customize this part.. You should start seeing the tax data populate when you use that sales org while creating MM
    Hope this answers your query.
    Edited by: Pavan Kumar on May 2, 2008 8:10 AM

  • Picking up default value 140000 for Recon account in FD02

    Hello Experts,
    I am an Abaper posting this query because FICO consultant is facing an issue on FD02 with Recon account
    To the company code CAP1 there are 2 Recon account configured 1) 20000 2) 50000.
    Now when we change the customer on FD02 or XD02 it displays a default value on Recon account field ie 140000.
    The reason why i have posted this query is because the FICO consultant says that it an issue with Abap
    and I dont think so could you please give me some insight on the same.
    What I think is this could be because some customization problem.
    Regards,
    Ranjith N

    hi,
    I did as you said.
    Yes a badi was implemented in which the recon account was set default..
    i changed it..
    is ter any way to deactivate a badi as we do it for user exits.
    Regards,
    Ranjith N

  • Default Values option for entire page

    Is there a way to set the entire page to use the default values for the entire page. I know you can set it per variable, and I have quite a rythyme so I can do it fairly quickly but with multiple pages with 100 or so values it gets tiring. I have tried setting it under the Page Settings Manager by setting "usedefaultValueParameters" to True for the page. It seems to ignore this though, it is still sending the parameters.
    I couldn't find any other option, and I do need to still send them on some of the pages within the script, I just don't want to overwrite the same page when I pull it up in future pages after filling it with a databank file.
    Just wondering if there is a better solution or if I need to get back to my F4-Tab-Tab-Tab-Space-Enter-Down-Repeat.

    Thanks for the reply, the only navigation I have done on those pages was clicking cancel on the bottom to go back to the search screen, but it is not working. I guess it is back to setting each field up to use defaults. Unfortunate.
    Does it have to be recorded with that setting?
    Message was edited by: jmelling

  • What is the default value length for attribute?

    I have found that there is no limit for the value length about the attribute directorystring.
    Is it right?
    Another question is:
    I created an attribute with the "multi-valued".
    How many values can i add into the same entry?
    Thank u very much.

    Correct. By default, there is no limit for the value length. However, it is possible to limit the max length for a given attribute type by specifying the max length in curly bracket in the schema definition e.g.
    attributetype ( 2.5.4.41 NAME 'name'
    EQUALITY caseIgnoreMatch
    SUBSTR caseIgnoreSubstringsMatch
    SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{32768} )
    The value {32768} indicates the maximum length of the string and is optional.
    There is no limit in the number of attribute value too (as long as you have enough memory and disk to process it) . However, keep in mind that most directory servers limit the length of the LDAP PDUs, so you might have to change these settings if you want to create or search for very big entries.

  • How to set the default value filters for navigational block in WAD.

    Hi Experts.
    as per the customer requirement . they have bex report we need to convert in to web. but in the bex for one field  they using default filters but am not aware in the WEB reports.
    Please anyone suggest me how to give the default filter values in the navigation block in WAD.
    Thanks
    Ashok

    Hi,
    In the Properties of the Navigation Block pane. Goto WebItem-- Goto List of Characteristics, in that click list it will pop up new window, there enter the required objects wants to be in the default filter area.
    Hope it hleps you.
    Veerendra.

  • Parameter default value different for clients...

    I have problem how to set that in client 010 the flag default 'X' will be automaticaly set, and for all other clients this parameter is without flag default ' '.
    Current situation:
    PARAMETERS: p_test TYPE xfeld AS CHECKBOX DEFAULT 'X' MODIF ID GVA.
    i tried to enter
    IF sy-mandt = '010'.
    PARAMETERS: p_test TYPE xfeld AS CHECKBOX DEFAULT 'X' MODIF ID GVA.
    ELSE.
    PARAMETERS: p_test TYPE xfeld AS CHECKBOX DEFAULT ' ' MODIF ID GVA.
    ENDIF.
    this is not working, the msg is Parameter "P_ALV" has already been defined. .
    Can you please help?
    BR
    Saso

    Hello
    If you bear in mind P_TEST (instead of P_ALV - already been defined ) then try this:
    PARAMETERS: p_test TYPE xfeld AS CHECKBOX MODIF ID GVA.
    INITIALIZATION.
    IF sy-mandt = '010'.
      p_test = 'X'.
    ELSE.
      p_test = ' '.
    ENDIF.

  • Default value format for the CQ datetime widget

    Hi,
    I have created a simple dialog.xml with datetime property:
    <firstReplicate
                jcr:primaryType="cq:Widget"
                fieldLabel="Article Date:"
                name="./firstReplicated"
                xtype="datetime"/>
    Now, in the documentation: we see that this widget accepts
    data : Mixed
    The initial set of data to apply to the tpl to update the content area of the Component.
    <firstReplicate
                jcr:primaryType="cq:Widget"
                fieldLabel="Article Date:"
                data="2013-07-18T00:45:00.000+01:00"
                name="./firstReplicated"
                xtype="datetime"/>
    Didn't seem to be setting the data value on my datetime. What is the correct data value for the datetime xtype ?
    Thanks,
    Peter

    Solved: default is value:
    So, the working example is:
    <firstReplicate
                jcr:primaryType="cq:Widget"
                fieldLabel="Article Date:"
                value="2013-07-10T00:45:00.000+01:00"
                name="./firstReplicated"
                xtype="datetime"/>

  • Default values for data types

    what are default values for all the data types that exist  in abap
    Title was edited by:
            Alvaro Tejada Galindo

    Hi
    For CHAR data type default is SPACE
    for INTEGER,PACK and FLOAT types it is ZERO '0'
    for NUMERIC also so many Zeros
    for Time(TIMS) it is 6 zeros and Date(DATS) it is 8 zeros
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • How to set a default value for a page item

    I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
    Thanks very much.
    Judy

    In the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
    Any more suggestions? Thx.
    Judy

  • How to set default values for boolean columns

    I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
    I've tried to set default value at column level:
    <Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
    Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
    <Default>TRUE</Default>
    </Field>
    and at content type level:
    <FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
    But in any case, when i create a new item with this content type, default value is applied.
    Can anyone tell how to set default values for boolean columns?
    Thanks in advance,
    Regards,
    Sergio

    In the field definition you can set
    <Default>1</Default>
    or
    <Default>0</Default>
    How to set the default value Null?

  • Specific default values for select-options high and low

    Hi
    My requirement is in the selection screen i have a select-options field for which i need to give default values as mentioned below.
    Description                              Data Type       Default Value     Mandatory?             Sel Scrn Type     
    Delivery/BOL Date        ekab-bedat                         1st DOM to current day     Y              Range     
    The datatype is ekab-bedat.
    In the low value field ,it should be 1st Date of month(DOM) and in the high value field it should be current day.
    Give me the code for the same asap.

    >
    sreedeep.sreekumar wrote:
    > Dont mistake my intensions. When i tried to write it in the form of a request it showed me that it cannot me posted beacuse the words that i am using (please,kindly) is not following the terms and conditions of the words to be written in the threads
    Sounds quite vague to me.
    >
    sreedeep.sreekumar wrote:
    > I was asking help for this as i am a novice in SAP-ABAP and i couldnt find solutions for it and also i have seen people directly writing codes for the queries.
    Becuase you see people posting pieces of code doesn't mean you can ask for a solution asap. Besides, whether you're new or a veteran in ABAP, what you need can be solved with some very basic knowlegde of ABAP. Just use a bit of common sense.

Maybe you are looking for

  • Installing Windows 7 on a new partition

    I have a Satellite P300-19F and it came with Win Vista. I am trying to install Win 7 on a new disk volume, but I do not have the Toshiba programs that came with the equipment (software for webcam, DVD, etc). Where can I download all that software of

  • How to make "shutdown immediate"  command display information

    Hi All, i just shut down my database using "shutdown immeidate". it does not display any information and just stop there. i wait serveral minutes and it display nothing. i do not know that it is doing. so i just use "shutdown abort" to shutdown. does

  • ACS Replication Issue

    Yesterday we had two ACS 4.0 servers installed on Windows 2000 Domain Controllers that were working great. ACS1 was the primary server and replication was configured to send to ACS2. ACS2 replication was configured to receive from ACS1. We lost ACS2

  • Looking for flash cookies (or .sol files)

    Good day, all Earlier this year I found out about Flash cookies (the .sol files). I didn't like the idea so when I quit Safari I would run a search for .sol and then delete them all. Up until now I was using 10.3.9 for the OS and the 4 year old versi

  • Hi all..very urgent..problem with the transaction VL10.

    Hi gurus,i having trouble in executing the transaction VL10. the procedure is as follows. 1.Enter the transaction VL10 2.Select Sales orders Tab Enter sales document number 16283319 to 16283320 Remaining all fields should be blank 3.Click on Execute