Inspire 5200 5.1

Hi
I was wondering if anyone has ever had problems with these speakers.... I dont know what the problem is...it was working fine for about a month and the connection to the right rear speaker on the sub died. I cant explain it. The speaker works fine, as I have tested it on the other connections, but the right rear, all i hear is the sound coming from the woofer...
I am not sure if the voltage was not enough, or if there was a surge...and im thinking about sending it back, as I have the warranty, but i wanted to know if any of you guys would have an idea whats going on, or if there is a bad batch of 5200's out there

Hi there
The easiest way to test the speaker/channel is to run a surround sound audio test on it. If you have correctly connected all the cables AND your speaker are setup as 5.1 in the windows/creative audio control center, then all you need to do is ot download a simple 600kb surround sound audio file from microsoft's site:
http://www.microsoft.com/windowsxp/u...er/5audio.mspx
Just play the file and see if the right sound comes out of the right speakers.

Similar Messages

  • Voltage question for Inspire 5200 5.1 Speakers

    Hi, I'm new to the forum, so I'm not sure if this question has been answered in the past, but...
    I just moved back States-side after living in Pakistan for about 6 months, and I brought my Pakistan-bought Inspire 5200 speakers. I don't know if I should buy a voltage converter or whatever.
    On the AC adaptor, it says "PRL. :230V~50Hz 320 mA... SEC. : 2V ~ 4.2A". I read up a little on this stuff, and, unless I'm mistaken, in Pakistan, the voltage is 220V and 50Hz, while in the US, its 110V and 60Hz.
    Is it safe to use the speakers here WITHOUT a voltage converter or a step-down transformer?
    If it isn't safe, then what specific things do I need to pick up from Radioshack to make sure my speakers work and don't short-circuit or fry?
    Thanks.

    If you use the right step down transformer than it's perfectly safe. The problem is, step down transformer worsen the sound a lot unless you use the very expensi've one. But if you can't hear the different than it's good then, trust your own ear anyway. I think the best way is to change the adaptor.

  • Creative Inspire 5200 5.1 Bass setting

    I am currently using Creative inspire 5200 5.1 speaker system with X-fi Xtreme music sound card,can anybody suggest me the best setting so that i can get best bass for music,and Dolby/dts movies?.
    i did try the +5 dB subwoofer gain from THX console,but that makes more of a unnatural sound....so pls do suggest the best setting possible for getting perfect sound out of my speakers...
    thanks in advance,
    karthik

    Just adjust according to how you like it. Everyone preferences is different so their so called "best setting" is different too.

  • Inspire 5200 5.1 - Can it run Xbox 360??

    I have the Inspire 5200 5.1 system on my PC.
    I can run the Xbox 360 through the PC by running the audio outputs through the 'Line In' port on my sound card. This is probably not 5.1 but it is good enough for what little I use the Xbox.
    However I would lke to use the Inspire 5200 direct to the Xbox without going through the PC if it is possible WITHOUT an expensive decoder.
    Is the Inspire capable of doing this?
    Is it a stand alone speaker system or does it need power from another source?
    If I hook the audio out from the Xbox into the 'Front' input on 'Audio Input' will this work?

    This should work as the 5200s are powered speakers. However you'll need a phonox2 to stereo mini-plug adapter so you can plug it into your speakers (the green jack on the speakers (Front L/R)).

  • "Inspire 5200 5.1 HELP!!! no sound!

    "Inspire 5200 5.1 HELP!!! no sound! Hey guys, i just recently got an inspire 5200 5.1 system and hooked it up. All connections are great and are connected properly to the sound card (all colors to all colors). The problem i have is that i hear absolutely no sound from the speakers. I have checekd all the settings and am unable to locate the issue. I have a soundblaster 5.1 card (2 cards so i know my card is not a problem). I also tried connecting some headphones in the volume module and i can infact hear sound from the headphones. Is it possible this is a hardware issue with ALL the speakers?
    The only thing i can think of is the power source. The original power adapter was for the asian/euro market and i am in America. I have used a tiny converter switch that changes the euro interface (2 long circular pins) to the american outlet interface (two long rectangle pins). Could it be that the speakers are not getting sufficient power somehow by using this adapter? Any suggestions would be much appreciated!

    creek,
    You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
    If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
    http://forums.americas.creative.com/...essage.id=2563
    Jason

  • How to connect my Inspire 5200 5.1 Speakers to my XBOX? Pls Help!!!

    Dear all,
    I am in need of dire assistance to connect my Creative Inspire 5200 5.1 Speakers to my XBOX. If possible, I would like to maintain the full 5.1 functionality when watching my movies and playing games (that support 5.1 sound).
    What other cables, adaptors, connectors do I need? Pls help... I am really not experienced with TV electronics, wires and stuff.

    Ok, I did a search & found a post by NsOmNiA930 :
    >>>
    Or, you could make a custom analog adapter and get fake 5.1.You'll need 2 RCA couplers (or a coupler with 4 RCA Female jacks), a dual RCA to single 1/8 mini jack adapter, a single 1/8 female - 2 /8 male adapter, 2 /8 couplers, and a headphone splitter. It should look like this:RCA from Xbox Dual RCA CouplerRCA to 1/8" adapter(1)Female to (2)Male Adapter(2) 1/8" Coupler on Male ends of previous adapterHeadphone splitter on one of the couplersIMPORTANT! BACK MUST BE BY ITSELF ON THE CORRECT /8" END! CENTER AND FRONT SHOULD BE ON THE HEADPHONE ADAPTER! IN ORDER TO FIND THE CORRECT CHANNEL, DO A 5.1 TEST ON YOUR SPEAKERS AND CONFIGURE APPROPRIATELY!
    >>>
    Ok, can some kind soul translate that into English? What are all these components(adapter, coupler, headphone jack, 1/8?) What do they look like?

  • Inspire 5200 5.1 speakers only two working

    Hello,
    I recently bought the inspire 5200 5.1 speakers. I connected everything properly and well tried them, but I got output from the front left and right speakers. The center speaker, and the left and right rear speakers produced no output.
    Then I bought a 6 channel sound card, and tried to hook everything up again, but it was still the same result. All the speakers are working cause I tried them all. It seems that the lower panel insertion points for speakers don't seem to be working, or it's something that I am missing out.
    Thanks

    creek,
    You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
    If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
    http://forums.americas.creative.com/...essage.id=2563
    Jason

  • Inspire 5200 - Cable Extension and Switch Box

    Hello, I am looking for the Inspire 5200 cable (green,black,pink), which can be used to extend the default wire that comes with the product.
    1) Is it possible to get a connector which can be used to extend this cable?
    2) I have connected my 5.1 speakers to my Philips DVD Player - its working great. Can I get a switch (something like the keyboard/monitor/video switch box) to connect both PC and DVD Player?
    Thank you.
    Kamlesh

    Hello, I am looking for the Inspire 5200 cable (green,black,pink), which can be used to extend the default wire that comes with the product.
    1) Is it possible to get a connector which can be used to extend this cable?
    2) I have connected my 5.1 speakers to my Philips DVD Player - its working great. Can I get a switch (something like the keyboard/monitor/video switch box) to connect both PC and DVD Player?
    Thank you.
    Kamlesh

  • Which speaker system is better: Inspire 5200 or 5300?

    Hi,
    I'm just about to :smileyindifferent: buy new Creative speaker systems. Unfortunately, in my country and city options are scarce. Only few models are available and I am trying to get a good, decent sound, with good bass for bassy songs (i.e. dance, hip-hop), and good sound in general for PC-based games and DVDs.
    I am given two choices: Creative Inspire 5200 and 5300. The big question: which one is better? I supposed that since 5300 is a bigger number than 5200, the 5300s should be better; but I may be wrong (e.g. the total RMS power of the 5200s is slightly higher than the 5300s!), so... somebody can give me a piece of advice on this?
    I am willing to spend as much as USD$50.00 on my new speakers... so if someone has better speakers in mind for that price, I'm open to suggestions. With luck, I can give them a try.
    Regards.

    Logic does not run on Windows computers anymore, only on Apple Hardware.

  • Inspire 5200 5.1 all OK but............

    Hi all
    i bought my inspire 5200 5.1 and i had sound blaster live! 5.1 installed in my computer,
    every thing goes ok , the sound is very nice except one thing , the center speaker hissing
    and keep do that even i mute the mixer or just turn on my speaker, i though the problem from my sound card but i removed all cables from the sound and the hissing is still alive,
    i think the problem is not from the speaker coz i connect the center speaker, to one of the other speaker channels, and no luck.
    Any help please.

    creek,
    You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
    If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
    http://forums.americas.creative.com/...essage.id=2563
    Jason

  • Connecting Inspire 5200 to X-Fi Xtreme Noteb

    Hi,?
    I have a set of creative Inspire 5200 5. speaker and I want to connect them to my notebook with the X-Fi Xtreme Notebook card.
    Before buying the card, I want to make sure I can connect the speaker to the speaker docking module and I also want to know if I can connect my Xbox 360 optical cable to the card to have a 5. sound with the speaker.
    If anyone know if this will work or know a better way to connect all of this please let me know.
    Thx.

    Lazy to search? It's been here (and there) 'bout thousand times already so it shouldn't be hard to find...
    ?....actually no,i thought my post clearly stated that i had seen conflicting posts and diagrams with regards to which was the right way to conenct the headers to the pins,and i was just looking for clarification. I apologise if i wasent clear in enough in this. Anyway,thankyou for taking yor time to respond and i will look into the link you gave me and see if its a good solution. Incidenatlly,another thought occured to me this morning.As i have the t7900 wired remote sat on my desk its entirely possible to run a?3.5mm male/female jack extension from the mic input of my x-fi card and place it next to my wired remote,having the mic jack of headset in this extension,and the headphones jack in the wired remote input.....is this a viable solution,and would this not compromise quality?again ty for your time. sc_

  • Inspire 5200 - Only 3 satellites work.

    Hello,
    I just purchased a set of Inspire 5200 but when I connect them to my PC, only the two satellites connected to the RCA's marked as "front speakers" and the one marked as "center speaker" work. The satellites that I connect to the RCA's marked as "rear speakers" don?t work.
    I don't have a special sound card. I'm just using the regular card that comes integrated with the motherboard. I wasn?t told at the store where I bought the speakers that I would need a special sound card to have all of the speakers work. Do I need a special card to have sound in the 5 satellites?
    I would also like to know if there's a way to use the 5200 with my DVD-Karaoke unit, and what kind of cables or adapters would I need. The DVD unit has the regular RCA outputs and the digital output.
    Thank you for your kind help.
    A.Molina

    Thank you for the reply Cat.
    I figured out this too late and the store didn't explain that to me, but anyways, I will get a Sound Blaster card, but I was wondering if I could buy an external card, such as the "USB Sound Blaster Live! 24-bit External" unit, and use it with the Karaoke unit too. I realize that this unit I mention doesn't have its own Power Supply input, and therefore I assume it must take its power from the USB port. Is this correct? If so, is there a way to provide power to the unit or would you recommend another card/option, as I'm really satisfied with the quality sound provided by the speakers, and I would like to use then with the Karaoke too.
    Thank you again.
    Best regards,
    A.Molina

  • Creative Inspire 5200 - Bass crackle

    Hi,
    I have creative inspire 5200 connected to Philips DVD Player. The combination works fine with less bass level. When i increase the bass level, i am experiencing crackle in subwoofer where as satellite speaker works fine(no distortion in sound). The distortion is not continuous, it comes and goes off(once in while). Please let me know the solution for this.
    Regards
    Abhinandan

    (Re: Creative Inspire 5200 - Bass crackle, abhinandan_gs,
    I suspect you're just overdriving the subwoofer input, and when you have an LFE signal, you're experiencing digital clipping.
    CL speakers are designed to accept an LFE-level signal which is 10dB softer than standard line-level. The DVD player is putting out line-level, and then the speakers are amplifying it +10db further, which puts it out of balance with the others. To test this, disconnect the subwoofer cable and see if the crackle goes away. I expect you will still have bass coming from the subwoofer, because the normal bass is in the non-LFE channels, and the speaker crossover will redirect that to the subwoofer, but I don't know what kind of bass management the DVD player might also do. If you think that's the problem, the next thing to do is to lower the subwoofer output 0dB before it reaches the speaker input. If you can't do that with the DVD player's controls, we can go into how to add a simple volume control to the subwoofer cable connection.
    -Dave
    ?[email protected]

  • Safety of the power supply of Creative Inspire 5200

    The power specifications of the AC adapter of Creative Inspire 5200 shows 12V 4.2A. When I checked with multimeter it shows 12V only in the AC side of the multimeter. My younger son has the habit of pulling the power cord from the sub woofer and touching the pin of that adapter. Is it safe. I want to know whether The actual volatage should be shown in AC or DC in multimeter.

    Hello,
    i think you have your output-signal not in the loop. So you get only the start-value (0 Volt) and the end-value (25 Volt).
    Here you have an example. You have to change the hardware-settings, but you can use the loop.
    Regards
    Markus Weigl
    NI
    Attachments:
    Spannungsausgabe.vi ‏101 KB

  • Inspire 5200 problems

    I have an Inspire 5200/Audigy 2 ZS combination that has worked fine for a couple of years (the speaker system has worked fine since I bought it in '02). However, after having updated the audigy drivers, I noticed (during a speaker test) that the left/right front speakers are at a normal volume, and the center/left and right rear speakers are very faint--so faint, in fact, I thought they were not working until I cranked up the volume. I've removed the drivers and reinstalled them, made sure that all physical connections were fine. I've checked volume settings and ensured that 5.1 setup was in the control panel. I can't find the Creative utility, though, that allowed me to change the volume levels for each individual speaker. What do I do now? Thanks.

    KokChoy-CL thanks for your advice but i do not think it
    Is related to sound card or....,i mean sound card...is ok ; however , something is wrong about entries of the speakers. Before i formatted my pc ,i had decided to take off some speakers. Then i tried to use them again but there was no sound coming from 3 of the speakers.After that i tought format would fix it but it did not work although i set everything properly. Today i format my pc again...and i noticed that the working-2-entry of the speakers are not working and the other non-working-2 entry of speakers are working (there is no problem related to speakers,they are all fine). I really do not know what to do. One more thing,when i take off the centre subwoofer's cable, the centre speaker and left and right speakers are working but when i put on centre subwoofer's cable 3 of the speaker including centre speaker are not working and the other 2 of the speaker are working.Could anyone tell me how to fix this problem? If you have no idea ..can you tell me how can i get the CD which is given with this product or there is sound control program (which is in the CD) i barely remember..''soundmax...'' or something else..Does anyone know how can i get that program? Thanks for your attention..

  • Broken volume controller for inspire 5200

    My volume controller for my inspire 5200 (http://www.creative.com/products/product.asp?category=4&subcategory=25&product=55&n av=) is broken, (it only plays music on the right side, left side is extremely low) how would I replace it, I looked on the website for the closest thing were these http://us.creative.com/products/product.asp?category=4&subcategory=30&product=9858 but it said that it was not compatible with my brand. How Would I buy a replacement?

    hi,i too faced the same problem.my speaker's vol controller was broken too.i contacted the creative labs they told me that replacement is the only solution.so i had it replaced, now its working fine.

Maybe you are looking for