Install 10.3 on iBook G3 without DVD drive

I just bought a used G3 iBook to use occasionally for when I travel.
The iBook currently has OSX 10.0 installed....it does not have a DVD drive and I do not have a external DVD drive.....I have 10.3 DVD installer disk...is there any way to install 10.3 on my iBook...?....is there a way to use my iMac/Intel to install 10.3 onto my iBook..?

I thought 10.3 Panther came on Cds? But If you have a DVD version somehow, and another mac with a DVD Drive, and a firewire cable, you can do it! shutdown the iBook. Then connect the firewire cable from the DVD mac to the iBook. Turn on the iBook and hold down the "T" key. You will see a FireWire logo on the screen . Plug in the iBook Power Adapter if you havent already. Shutdown the DVD mac. Turn it on and insert the Panther DVD. Hold down the "C" key on the DVD mac. If the DVD boots, go to the next step. But If it doesnt boot, turn off the DVD mac and reboot while holding the "C" key. the DVD will boot. On the setup screen, chose the iBook Hard drive. Install to the iBook Hard drive and when done, the DVD mac will reboot using the iBook's hard drive. Shutdown the DVD mac and disconnect the cables. Restart the iBook and you will boot into Panther! You can purchase a FireWire cable at places like BestaBuy and CompUSA. I hope this helps!

Similar Messages

  • What can I do? Trying to install cs4 indesign on on iMac without DVD drive.

    I copied InDesign onto a USB stick from the CD. I want to install InDesign on my new iMac (I will soon ditch the computer that now has InDesign installed).
    I have to install InDesign from a USB stick as the iMac has no DVD drive.
    When I clicked on 'Setup' this message came up.
    "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance."
    There was no error number.
    Is there any chance of my being able to actually talk to Customer Support to solve this problem?

    It is not likely that customer support will support you in this due to it being an older product.  What you should do instead of trying to use the USB stick is to download the installation files and install those.  Then use the serial number from your DVD to activate the installation.
    CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
    You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Install purchased Adobe Photoshop Elements 11 without DVD Drive

    I purchased Adobe Photoshop Elements 11 but I am unable to load it onto my Ultrabook as it does not have a DVD drive.
    Is there a way in which I could download Photoshope Elements from the Adobe Elements website using the serial number from my purchase?
    Thank you very much for your help!

    follow steps 0-6 and you will be able to download a trial:  http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    use your serial to activate.

  • Need help booting from DMG file without DVD drive

    okay so i have 6 computers with me right now. i need to use one that has a dvd drive to install it on a comp that doesnt via firewire.
    1- macbook with superdrive and os 10.5 (cant even open tiger install because its a new macbook
    2-iBook g4 with DVD drive BUT the firewire port is broken
    3-iBook g3 (one that needs tiger but only has a cd drive)
    4-ibook g3 (without dvd drive)
    5-powerbook g4 with dvd drive and firewire (for some reason will not read the tiger discs i just burned, even though ive already used them on the ibook g4
    6-mac pro with firewire and dvd drive, but the dvd drive is broken.
    so seems to me, every computer i have has a weakness for exactly what i need. what i need to know now is if i can boot the powerbook g4 from a DMG file of tiger install disc 1 and install is to the target ibook through firewire. if you have any suggestions on what i should try with the supplies mentioned above, please inform me. thanks!

    what i need to know now is if i can boot the powerbook g4 from a DMG file of tiger install disc 1 and install is to the target ibook through firewire.
    You can't unless the PowerBook is running Mac OS X Server, in which case the NetInstall feature can be used.
    (38733)

  • How do I install Tiger without DVD drive?

    How do I install Tiger without DVD drive on a Powerbook?
    My Powerbook had some problems recently, the HDD and the Superdrive where gone. I replaced the HD but can not get Tiger installed here because the DVD drive isn't working. I boot right now from a FW HD. Any Ideas how to install the OS on the internal drive?
    Any ideas would be apreciated.

    See Option 2 in
    <http://docs.info.apple.com/article.html?artnum=304129> or Option 1 in
    <http://docs.info.apple.com/article.html?artnum=303028>
    It has worked for at least one person:
    "Kenichi Watanabe
    Posts: 853
    Registered: 2-Sep-2003
    Re: Using DVD drive in iMac G4 for iMac G3 in Target Disk Mode-->won't read DVD
    Posted: 26-Oct-2006 4:37 PM in response to: AJ Nealey
    Reply Email
    I just tried it between a Power Mac G5 and a PowerBook G3 (Pismo) and it worked. The G5 was Mac in Firewire Target Disk Mode. I started the G5 with the T with no DVD in the drive. I started up the G3, and the G5's hard drive appeared on the G3's desktop. I pushed the eject key (on the G5 keyboard) and the SuperDrive opened. I put in a DVD (the Tiger installation disk) and closed the SuperDrive. The DVD appeared on the G3's desktop. I restarted the G3 with the Option key held down, and the DVD in the G5 appeared as a valid startup choice."

  • I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    I have an older IMac 5. I installed snow Leopard on. Now my DVD drive is not working. Discs go in but it dosn't boot up or show in finder. Then disc won't eject unless i shut down and restart. HELP !

    Snow Leopard cannot run on a PPC G5 Mac as it requires an Intel processor. Please confirm what Mac you have.

  • How to install iLife on an iBook without DVD drive

    Some time ago I bought iLife 8 only to find it was on a single DVD which I could not use on my twin-USB iBook with only a CD drive. Now a friend has suggested that the DVD could perhaps be copied to 6 Cds and loaded that way. Toast has a spanning facility to spread a big file over multiple disks. Or could my iBook be hooked to a big Mac with a DVD drive, and the program transferred by Target Disk Mode. Does anyone know if either of these techniques would work?

    Of the two, target mode would be far more efficient (and less risky -- in terms of software data corruption). I have in the past installed OS X on a machine with a poor DVD drive, so iLife should be no problem.

  • Can I install Tiger without DVD drive?

    Hello all!
    I need your advice and help!
    Today I finally added more RAM to my iMac and proceeded to upgrade to OSX. I bought v10.4.3 Tiger at a retail location. Nothing happens after I inserted the installation DVD. Then I realised that I probably do not have a DVD drive! (I did look at the system requirement page and saw a slot loading iMac there ...)
    Is there any way I could install Tiger? All your help is much appreciated!
    kris

    First, have you installed the firmware update required for your model? You must boot directly into OS 9.1 or higher (but not OS X) to install the firmware update.
    Secondly, your hard drive must be formatted Mac OS Extended (Journaled) for Tiger.
    If you open your Apple System Profiler it should tell you if you have a DVD drive. It was an option on your model, especially if you have the DV model.
    If you don't have a DVD drive, then there are ways to install Tiger without one. One way is to exchange the DVD for a CD set from Apple. Visit the Apple OS X site to find the form needed for the exchange.
    The following KB articles present alternatives for installing Tiger without a DVD:
    http://www.oreillynet.com/pub/wlg/6976
    http://www.applelinks.com/p5/index.php/more/osx_odyssey_752_how_to_installing_tiger_using_firewire_target_diskmode/
    You can also use an external Firewire DVD drive provided it is a bootable drive.

  • Install Windows 7 without dvd-driver?

    Hello,
    I have got a problem, I have a Macmini 2011 without a dvd-driver and I wanna install Windows 7 with Bootcamp. But after I downloaded all updates I have a buttom "Install", when I press it there comes: "pleace put the Windows 7 dvd in the driver", but I have no driver! Pleace Help
    (sorry my English isn't very well)
    greets

    Hello, your English is actually quite good!
    I think I'd find a way to make an ISO out of it, which should be supported, & the reverse of this...
    https://discussions.apple.com/message/18616093?ac_cid=sa123456#18616093

  • How do I install Adobe Photoshop Elements 12 on new MacBook Pro without DVD drive?

    I just purchased my first MacBook Pro and am trying to get everything set up and installed. I purchased Adobe Photoshop Elements 12 and retrieved my serial number and have the redemption code -- but I can't figure out how to install Photoshop without a DVD drive. The Photoshop package I purchased only provides DVDs and I don't have a DVD drive. Is there a website I can go to to install Photoshop and enter my serial number or redemption code?

    Have you tried downloading the trial version and using your serial
    number to activate it?
    The trial version is a complete product and can be activated by
    inserting the valid serial number.
    Good luck.

  • How to install from DVD onto machine without DVD drive

    My boss has a laptop without a DVD drive, and wants to install Tiger. Tiger comes on a DVD. What is the best way to complete this install?
    If I put the DVD in my laptop, then mount it as an external drive will that give us access to the DVD within it?

    You can copy Tiger to CD's (if you already have the Tiger DVD's) and do the install from CD's. Or if your boss has a firewire port on his laptop you can plug in a firewire DVD drive and run the installation from there. You will need to hold down the option key to select which drive to start off of.
    If you haven't already purchased Tiger you could buy the CD version on eBay.
    PowerBook G4   Mac OS X (10.4.8)   MacBook Pro

  • Install OS without DVD drive?

    I want to updgrade a g4 powerbook from 10.2 to 10.4 (10.5 if possible). The computer doesn't have a DVD drive. Can I book from an external firewire drive and then install from a Leopard disk image?
    thanks

    *How To: Installing Tiger Using FireWire Target Disk Mode*
    http://www.applelinks.com/p5/index.php/more/osx_odyssey_752_how_to_installing_tiger_using_firewire_target_diskmode/
    Does the Powerbook meet the Leopard requirements?
    *Leopard Technical Requirements*
    http://www.apple.com/macosx/techspecs/
    You can upgrade directly to Tiger or Leopard without going to intermediate OSs.
     Cheers, Tom

  • Installing on computer without dvd drive

    Hello, i think i am getting ilife 08 tonight (for my bday) and my ibook doesn't have a DVD Drive in it, however our school has a 1 to 1 laptop program, with ibooks with a DVD Player, i could do target disk mode, but i beleive that u have to have a password to do the install, and i dont' know the admin password, my question is, using disk utility (it is fully functioning on the school laptop) can i make a image or something, and put it on MY ibook, and install it? A Step by Step guide would be nice.

    no need for any action, your iBook does NOT support iM08 ..
    iMovie requires a Mac with an Intel processor, a Power Mac G5 (dual 2.0GHz or faster), or an iMac G5 (1.9GHz or faster).
    http://www.apple.com/ilife/systemrequirements.html

  • How do you install MACOSX without DVD drive?

    hey guys,
    I have a Powerbook, the DVD drive does not work anymore. I would like to format my Powerbook. I remember hearing that you can install MAC OSX via network?
    The Powerbook is my only MAC computer, I have another computer which is a PC running on Windows XP. Is there anyway I can put my original MAC OSX bootup disk on the PC and have it read by the Powerbook via ethernet network?
    If there is a more simpler solution, please advise.
    PS. I'm aware I can use an external firewire DVD drive, but I do not have access to any at this point, and unfortunately can't spend money on one. I'm broke from school tuition, books and the necessities of life.
    Thanks again for your help and support.
    Teddy

    You can only install OS X over a server running OS X Server. If you don't have access to an Apple server then you cannot install over a network.
    If you have access to another Mac with a good DVD drive it is possible to use Target Disk Mode to do what you want.
    How To- Installing Tiger Using FireWire Target Disk Mode
    How to Use FireWire Target Disk Mode

  • Need help in installing Snow Leopard without DVD drive

    Hi,
    I have a White Macbook 2008 model with 2.1 ghz processor and 1 GB Ram. The dvd rom is not working in my machine. It spits out the dvd's 99 out of 100 times.
    I need to upgrade from 10.5.8 to 10.6. Apple has sent me a single disk to install snow leopard.
    I am not willing to invest in new dvd drive either internal or external. Needed help on ways to install snow leopard please apart from using the dvd option.
    I do have a Firewire 400 cable but i do not know anybody anymore who has a mac machine with 400 port.
    Hence the cable is also useless and i cannot connect to anyother macbook and do the install using their drive.
    Please suggest.
    Regards,
    Rahul

    There are no direct options. Find a friend with a Mac that has a working optical drive. Buy an 8GB USB flash drive. Partition and format it for the Mac then clone the mounted DVD to the flash drive. Take it back to your computer and boot from the flash drive.
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for the flash drive.
      5. Click on the arrow button below the icon.

Maybe you are looking for

  • Infoset functionality in BI-HR

    HI all, I worked on infoset, but functionality of Infoset with time dependent objects is different. Can any one share there experience with infoset scenarios in HR module implementations. 0HR_PA_0 and 0HR_PA_1 doesn't support delta , then how to capt

  • How can i delete an registered device from apple account.

    Hallo I registered 4 device to my itunes account sometime ago a got a virus in my network and i must re-install the operating System an all 4 devices.... So now my question.. How can i delete the now "not more available" devices from my apple/itunes

  • Ovi Maps 3.04 missing weather icon

    After installation of the 3.04 update, in my E52, I missed the Weather icon, even when I am online (with SIM card). Any help??? Solved! Go to Solution.

  • How to use Flex SDK 4.0.0 in Flash Builder Burrito?

    Hello! How can I create a project with Flash Builder Burrito that builds against the Flex 4.0 SDK? I tried to copy the 4.0.0 sdk folder over from my Flash Builder 4 installation, but if I create a new project in burrito, it still offers me only choic

  • Is WebEx Enabled TelePresence supported with Expressway Core and Edge?

    Is WebEx Enabled TelePresence supported with the Expressway Core and Edge instead of using a VCS Control and Expressway? This is one thing I'm not sure of, as the scheduled conferences will have to register to the Expressway Core and wasn't sure if t