Install Adobe Premiere Elements 10 using the setup.exe in the root folder

I am trying to make an SCCM install package for PremiereElements_10_LS15_win64. I am following the directions I found here http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html and I am using a Win7 SP1 machine with a new NT profile that does have admin rights. The error I receive is, "Install Adobe Premiere Elements 10 using the setup.exe in the root folder."
Also, when I try to use AAMEE 2.1 I am told that when I use the containing the setup.exe and the .msi that "A valid installer could not be found."

Hi Chris,
First of all, you will not be able to package PSE 10 using AAMEE. It needs to be packaged only using the xml method, that you tried and got the error.
So, here is want i want you to try.
> Take a Win 7 machine with a fresh OS installation.
> Follow the above article that you have properly i.e. create the application.xml.override.
> Test the xml package by running the command mentioned under step 2 using the command prompt.
Check if that works.

Similar Messages

  • Trying to install Adobe Premiere elements 12.  When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use.  Please close all running exe(s).  Nothing is runnin

    question:  Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated

    Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

  • I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help pleas

    I am trying to install Adobe Premiere Elements 9 without success. I successfully installed Photoshop Elements 9 without a problem. The message I am getting is 'Invalid Unicode file - .\Autoplay\LangData\en_US\lang.dat'. Anyone out there who can help please?

    click setup, not autoplay.

  • I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program not installed or can be damaged".

    I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program is not installed or can be damaged". Then aborts the installation.
    It`s right, the program is not istalld, it is  what i`m trying to do. And there is no problem whit the DVD. Any suggestions?

    "Error 1303: Installer has insufficient privileges" or "Error 1304: Error writing to file" | Install | CS3, CS4, CS5 pro…
    this link FIXED MY PROBLEM! i did the steps to the programdata\adobe folder and it installed FINE!

  • I'm trying to install Adobe Photoshop elements 13 Adobe Premiere Elements 13 and can't find the serial number. Where is it located? This is a dvd.

    I'm trying to install Adobe Photoshop elements 13 Adobe Premiere Elements 13 and can't find the serial number. Where is the serial number located? This is a dvd.

    Find your serial number quickly

  • How do I re-install adobe premiere elements on the same computer? Original installation had error -

    How do I re-install adobe premiere elements 11 on the same computer. Original installation had error - missing dll file.

    What computer? What exact error? Details are everything...
    Mylenium

  • I can only install adobe photoshop elements 12 but not able to install adobe premiere element 12 with the serial number to my macbook

    why I can only install adobe photoshop elements 12 but not able to install adobe premiere elements 12 with the same serial number to my macbook?
    Photoshop Elements

    PSE and PRE have different serial numbers. If you bought both programs you should have two separate serial numbers.

  • Im trying to install Adobe Premiere Elements on Window 8.  The Windows Installer is not working.. some window pops up with an error message and it does not install

    I get the following window pop up after trying to install Adobe Premiere Elements.  After it prompts me to select the language i get this:

    I think I figued it out... But why installations instructions didn't come up when I inserted the disk was very annoying. And because they didn't, Adobe should post th installations instructions somewhere on their support site. Not here now, which is also annoying. 

  • We tried to install Adobe Premiere Element and it keeps saying the E drive is empty.

    Adobe Premiere Elements 13.1 keeps saying the E drive is empty.  We got around it by changing the name to another letter.  Why did it do this?

    ireneo
    Please explain your question a bit further. Is the following your scenario?
    1. You installed Adobe Premiere Elements 13 (on what computer operating system?) Assumed from installation disc and to the default location on the Local Drive C.
    2. You are inserting your installation disc into the burner tray, the burner being the E drive? And, you get a message about empty E drive instead of the AutoPlay for
    you to click on to start the installation path?
    There is a known problem with Premiere Elements 13/13.1 where installation of this version generates a No Disc error. The fix for that is deleting or disabling the OldFilm.AEX
    file in the path
    Program Files
    Adobe
    Adobe Premiere Elements 13
    Plug-ins
    Common
    NewBlue
    and in the NewBlue Folder is the OldFilm.AEX file that you delete or disable by renaming it from OldFilm.AEX to OldFilm.AEXOLD.
    What type of Blu-ray DVD burner or DVD/CD burner was involved in this situation - internal or external?
    ATR

  • While installing Adobe Premiere Elements 10 for Mac my installation encountered errors.

    While installing Adobe Premiere Elements 10 for Mac my installation encountered errors. Got about 42% and then crashed with an Exit error Code 7.
    The summary says:
    DW036: Payload cannot be installed due to dependent operation failure.
    I have screengrabs:

    This is the correct forum http://forums.adobe.com/community/premiere_elements
    And, some information to help with install problems
    http://www.adobe.com/support/contact
    In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
    In the US - Adobe Install Problems 800-642-3623
    In the US - Adobe Activation 866-772-3623 Open 24/7
    and
    New forum for Download & Install & Setup problems
    http://forums.adobe.com/community/download_install_setup
    Chat http://www.adobe.com/support/download-install/supportinfo/
    When you get to the correct forum, provide more information about your computer
    These questions below may be for a different product... but the information you need to supply is the same, for the products you use
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    -http://forums.adobe.com/thread/419406

  • Unable to install adobe premiere elements 10 10

    I was trying to install Adobe Premiere Elements 10 but the installation would stop abruptly somewhere half way through and the disk would pop out. I got the serial nuimber therough the web.
    What could be the issue here?

    Hi jkilat
    Download Premiere Elements CS6 Trial from here : http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Follow the Instructions Carefully to Start your download ...
    Use Your Serial Key to activate it

  • Installing adobe premiere elements 4 and importing video

    My Dell laptop will not install Adobe Premiere Elements 4.  I keep getting an Error message.
    I do have Adobe Premiere Pro CS3 on my computer, but I am unable to import footage from a DVD.
    I think because it is in the wrong format and I need to convert it.
    To cope with this problem, I tried to install Adobe Premiere Elements 4, but it will not install.
    I tried to contact Adobe Tech Support, but Tech support from Adobe is closed. 
    Even when it opens, I don't know if they will help.
    Suggestions? Thanks, Sue

    I don't think Tech Support will help with something that old... current is version 10
    My GUESS is you have Win7 and version 4 is simply too old
    As far as using PPro CS3...
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317?tstart=0
    Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
    Convert your SD files to DV-AVI Type II with 48KHz 16-bit Audio

  • Every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

    every time I try to upload MOV files from my iphone 5s onto my adobe premiere elements on windows 8 i get 'the importer reported a generic error'

    jade harding
    What version of Premiere Elements are you using on Windows 8.1 64 bit? For now I will assume Premiere Elements 12 in a NTSC set up.
    Your iPhone 5s video is expected to be 1080p @ 30 progressive frames per second? Do you confirm that? Because of the source of your video, it is highly likely that you are dealing with a variable frame rate.
    Please give the following a try to see if you then have an "importable" product to take into Premiere Elements presumed 12/12.1.
    Download and install the free HandBrake program.
    http://handbrake.fr/
    Import your video file into the program.
    Make sure you browse to and set Destination (suggested Desktop location)
    Go to the Video Tab and set
    Video codec = H.264 (x264)
    Frame Rate = 29.97
    put a dot next to Constant for the Frame Rate
    Click on the Start at the top left of the workspace
    Wait for the "Queue Finished" to appear in the progress bar at the bottom left of the workspace.
    Then see if this H.264.mp4 (1920 x 1080 @ 29.97 progressive frames per second file can be imported into Premiere Elements 12 project with a manually set project preset of NTSC/DSLR/1080p/DLSR 1080p30@ 29.97.
    Details for setting manual project preset can be found in
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    The details that I have posted in this reply are customized for Premiere Elements and should work fine for you.
    We will be watching for your results.
    ATR

  • I am on my mac and have os x yosemite. i am trying to install adobe premiere elements 10, but every time it starts downloading it stops and says it encounter 8 errors?

    i am on my mac and have os x yosemite. i am trying to install adobe premiere elements 10, but every time it starts downloading it stops and says it encounter 8 errors?

    you mean when it starts installing (not downloading), you see errors?
    if yes, attach a screenshot of the errors.

  • I cannot install Adobe Premiere Elements 11

    Hi, please help. I cannot install Adobe Premiere Elements 11 on my laptop, I run IE10, I disabled my Anti-Virus software and inserted the Elements DVD. I click on 'Install Adobe Premiere Elements 11', I then select 'English (United States)' from the list of languages. It then starts the 'Preparing to install' process and states that it is 'Configuring Windows Installer'. However, I then get a 'Windows Installer' text box appear, with what appears to be lots of HTML text inside. I click on 'OK' at the bottom of the box and then it just returns to the first screen again. This is very frustrating and I cannot work out what is going wrong with the installation. I installed Adobe Photoshop Elements 11 from the same DVD with no problem

    Thanks again, okay, so I click on the 'Install Adobe Premiere Elements 11' and then I select 'English (United States)' from the drop down list of languages -
    The next screen shows that it is 'Preparing to install' and I see the following box -
    and then finally it brings up a 'Windows Installer' box, however, when I click on 'OK' it takes me back to the first screen again -
    Any help or suggestions would be mucgh appreciated becaue at the moment I feel as though I have wasted my money
    Many thanks

Maybe you are looking for