Install Disks

Hello I have Install Disk 1 and Disk 2 labeled
2Z691-6126-A
2Z691-6113-A
They don't seem to work on my PowerBook G4, Are these the right discs?

Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4) . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See Can I use another Mac's system restore disc on my Mac? ). Expect to pay (possibly a lot) more than the Apple list price of $129.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
Possible Alternative if you are currently using Panther 10.3 – Do a Google search for Tiger 10.4 Upgrade DVD . It will upgrade your 10.3 to 10.4, but it doesn’t contain the full retail Tiger installer. Should be cheaper than the retail Tiger install DVD.
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
 Cheers, Tom

Similar Messages

Windows Vista install disk for my Mac?

I have just installed Windows vista onto my Mac but when using boot camp it only gives me the option of creating a Windows 7 install disk. Does anybody know where I can get a Windows Vista install disk? Thanks

No doubt if you Google for it you will find vendors. Check with amazon.com, too.

After I upgraded to Yosemite iphoto can't recognize my backup CDs which were created in iLife09. Ihave the original applications install disk and my old hard drive(I upgraded to SSD). How do I get a n iphoto back to read by old CDs?

After I upgraded to Yosemite,iPhoto can't recognize my backup CDs created in iLife 09. The applications install disk won't install iphoto because iphoto 9.5 is already installed..I updated to a SSD and have the original Hard Drive with an updated iphoto which recognized the older CDs(thanks to iphoto expander). I thought that the iphoto that transferred with the new hard drive was the same as what was on the old one. I guess it wasn't. I really need to access my backups. HELP

Later version of iPhoto write to the library on opening, and so cannot open libraries on optical media, as that cannot be written to. Further, optical media is going e way of the floppy disk. Therefore, you need to use a different form of archiving and back up going forward.
To allow iPhoto to open these libraries you need to copy them to your Mac or an attached external disk.
To merge them into an existing Library will require that you use either Aperture (if you have it) or iPhoto Library Manager.

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

The software that comes with your refurbished Mini should be identical to that which comes with a new Mini. Disk Utility should be in Applications > Utilities. Alternatively, choosing Utilities from the Go menu at the top of the finder windownwill take you directly to the Utilities folder.

Can't startup from OS9 retail install disk on iMac G3 DV

Hi All,
I'm trying to bring my old iMac DV (slot load) back to life and am having a problem trying to install OS9 from the retail install disk (I don't have the original disks that came with the system). Hardware-wise, all is ok with the iMac. However, when I try to start the system from the OS9 install CD (by holding down C during startup) the machine refuses to start from the CD. The disk is is good shape and I am able to startup from CD if I use any of my OSX install disks, but I can't get it to start for the OS9 install disk. As I said, it is the retail version of OS9 so I don't know if that has something to do with it.
Any help would be appreciated.
Thanks - Josh

Hi, Josh -
An iMac DV (Slot Loading) model originally came with OS 8.6, which means that it should be able to use any version retail OS 9 Install CD (white label with gold 9).
Since it boots okay to an OSX install disk, that the machine's firmware has almost certainly been updated, and that the optical drive is okay. Nonetheless, I would suggest using an audio CD cleaning disk in the drive to clean its lenses.
That pretty much leaves the OS 9 Install CD as the problem. Check it carefully - unlike audio disks, the Mac is far more fussy about a data disk such as an install CD. Make sure there are no scratches, no smudges or dirt on it at all.

Upgrade from 10.2 to 10.4 on iMac G3 600 MHz ? OS install disk ejects.

I am trying to help my friend with this one. I gave her my old iMac G3 600 MHz. it has 384 MB memory and currently has Mac OS 10.2.8 which I had installed previously. Now she has a new iPod nano and so the iMac needs the OS system upgraded to be able to use the iPod. I have the install discs for Mac OS 10.4 from an iMac G5 however when I simply put the install disk(s) into the drive slot, after about 20 seconds or so it ejects. Do I need a different install disk?? Cause I don't think I have another 10.4 disk anywhere. I really want her to be able to use her iPod Nano on her iMac! If I can do something on the iMac to be able to upgrade it I would really appreciate any suggestions or help. Thank you.

Thank you. I might try that with the iMac G4 I am using right now.
Are there any other suggestions??
This is random, but I have an extra iMac G4 which has been unused for a while. if I could get Tiger onto it, does anybody think it would be worth it to let her use the G4 instead and go through with transferring all her data? I guess what I'm asking if I get this iMac G4 to work would there be a significant difference running Tiger on it compared to the iMac G3 she already has?
I hope I've made sense. I really want my friend to have a decent computer with Tiger on it so she can use her iPod Nano.
Thanks for all your help.

Cannot boot either from install disk or hard drive

I have done a number of searches, and I have not found a problem precisely like the one I am encountering.
Earlier today, my MacBook (running Leopard 10.5.3) failed to wake properly from sleep. After I attempted to reboot the machine using the power button, I encountered a black box with the following message: "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button."
I have tried all of the usual fixes (e.g., zapping PRAM, removing all power sources, holding down the shift key), and nothing has worked. What puzzles me most of all is that, although the DVD drive is clearly working, I am unable to boot from the install disk.
I would add that, when I old down the option (Alt) key while booting, I am able to see all three of the available options for rebooting. This seems to suggest that the computer is still able to detect my hard drive as well as my DVD drive. Why, then, does nothing allow me to get past the black box with its cryptic (and rather unhelpful) message?
Out of desperation, I unsuccessfully tried to use the option of rebooting from my boot camp partition. I then received a message that might provide a clue. "Windows could not start because the following file is missing or corrupt: system 32\hal.dll" Does this suggest anything to anyone?
If I continue to be unable to get past the black screen over the course of the weekend, I will take my computer in for service on Monday. But it would be nice to come up with some sort of solution before then.

Let me add a quick update to my original posting.
I finally managed to run Apple's hardware tests on my machine. According to the tests, there is absolutely nothing wrong with my hardware. But the fact remains that I still cannot manage to boot into OSX--even using my original installation disk.
As I mentioned in my original post, I am able to get part way into the version of Windows XP that is installed on my boot camp partition. However, I am a little nervous about pursuing the possibility of repairing my XP installation. I am afraid that, by doing this, I may inadvertently damage my OSX partition.
Any and all advice would be greatly appreciated. In particular, I would like to know whether there is perhaps some secret way of forcing a MacBook to boot from the installation disk. Is there anything that one can do when holding down the "C" key does not work?

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

I am trying to locate an HP Photosmart 7960 printer install disk. Any ideas how to get?

Two questions....
I have an HP Photosmart 7960 printer and we have a new computer. We cannot find the install disk. I called HP and after about 2 hours of "help" was told that they can't support the printer anymore - it's too old. None of the on-line downloads from HP worked.
I have TONS of ink for this printer...
The ink cartridges are 56, 57, 58, and 59. If I cannot locate an install disk it may be worth my purchasing a printer that uses these cartridges. How would I find out what printers are available that use these cartridges?
This question was solved.
View Solution.

So the basic drivers listed under the link below didnt work?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=305383&lc=en&cc=us&dlc=en&lang=en&cc=us&...
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Follow up to HD crash - Install disk can't see new Hard Drive !!!

I may have a bigger problem on my hands.
I rebooted with my original install disk of OS X and when it gets to the "choose location" window, it does not see the new hard drive......????
I'm thinking about re-checking connections and/or possibly pull the hard drive out and do an external connection just to verify that it spins.
Not sure how to proceed and/or what to check ?? Suggestions ???

Make sure you chose the right format, and as far as partitioning in concerned, you have to select at least one partition, which will be the entire drive.

How to undo boot camp, wont boot from install disk in dvd drive

A few months ago I went through trying out boot camp and parallels. Now, I think something is messed up. I dont need either right now, so I just want to wipe out the whole system, repartition the drive, and restore to a blank new install of os x 10.5 leopard.
But when I put in the install disk, it wont boot up off it.
I tried holding down the c key while powering it up, and it just cycles through: hearing the drive whirl, a bling sound, and then repeating it again while the screen is blank. Finally, I held down the click button on the touch pad so it would eject the install disk.
Maybe this will help someone recognize part of the problem. Ever since messing around with boot camp and parallels, my machine wont "reboot". To reboot it, I tell it to reboot, then it hangs on the star like screen, then I have to hold the power button down, then if I do nothing, it tries to boot, but ends up in a dos looking screen saying no bootable device. So when I power it back up, I hold down the alt key, and then I have one choice: the hard drive. I pick that and it boots up ok.
So... I thought, well, maybe the boot camp is still messed up; maybe I should undo boot camp. When I start the boot camp assistant, there is only a "partition" and "back" button; nothing to "restore" the hard drive to just one partition.
What can I do? I want to wipe the drive and install a fresh install from my install disk.

Forgot to specify:
Im using an older Unibody Macbook (back when they were not all macbook pro's) 2008ish with Snow leopard 1.6.8
The thread you linked me to, Eric, shows the guy 'Niganit' with the eXACT SAME PROBLEM as me! He seems to have found out the problem but I dont see his resolve.
I just dont have the option to install windows 7 in any other form that a cd
a picture;

I have lost the install disks that came with my 2011 macbook pro, do i need to pay for new disks?

Hi
Iv lost my install disks for my 2011 Macbook pro and i want to reformat my hard drive. Do i need to buy new discs? I cant find a download on the appstore so i guess i cant download it for free since i have already bought it.
Any Ideas on how to resolve this issue?
Cheers!
Tom.

Yes. Phone Apple Support and order replacements.
(66912)

How do you make a back-up copy of the OSX Leopard Install Disk 1?

I'd like to make a back-up copy of +Leopard Install Disk #1+ but I only have one DVD read/write machine onboard the Mac Pro.
Can I insert the Leopard DVD, copy it to my desktop, remove it from the drive, insert a blank DVD and burn the contents to the blank DVD?
I'm trying to create a simple bootable Leopard DVD that will enable me to (a) boot up, then restore my System HD from a Time Machine Archive; and/or (b) run +Disk Utility+ from a source other than the main System HD if necessary.
I know I can do these things from the original Leopard Install DVD but I'm trying to preserve it and use it as little as possible in the event I need to reinstall Leopard.

In addition to Malcolm's instructions I want to point out that you need a Dual Layer
DVD+R (or -R) for this. Those are quite flaky and some might not work or not work well when you burn them. I was recommended Verbatim DL DVD+R as being reliable. try those.
also, instead of burning to a copy of the install Disk 1 to a DVD you can clone it to a partition on your hard drive. Just make a small partition, insert the DVD, select it in Disk Utility and click on "restore" tab. select the DVD as the source and the partition as the target and hit "restore". this will give you a very fast bootable installer right on your hard drive.

Can I use the install disk on two computers?

I haven't actually installed it on my computer yet, I just allowed whatever was going to install itself to come up. If I have another computer, can I use the install disk to put OSX on there or not? If so, can I still use it in case I need a backup load of my computer?

Only if you get a family pack license newer than the installer disk which came with the computer(s) can you install it on multiple computers. Check your license agreement.
You can't use the disks which came with another computer on a second computer. These articles explain more along those lines:
http://docs.info.apple.com/article.html?artnum=25517
http://docs.info.apple.com/article.html?artnum=25784
As for backup, I recommend looking at these various procedures:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Making a copy of Leopard Install Disk

Hi there,
A while back I copied the contents of my Leopard install disk by simply dragging the files from the Disk into a new folder on my Desktop with the idea of making a back up copy in case I lost my original DVD. So recently my G4 started to slow up a little so I decided to de-clog it by doing a clean erase and install. However when I double click the "Install Mac OS X.app" icon and a dialogue appears saying:
"The application "Install Mac OS X" cannot be used from this volume. To install Mac OS X, please use the application provided on the Mac OS X installation disc."
So I went to find my original disk and it has simply disappeared.
So my question is If I make a disk image of the copied Leopard disk files that are on my desktop then burn it, can I install then from that Disk.
All and any help would be greatly appreciated.
Thank you

Unfortunately, your drag & drop backup copy of the OS X install disc is no good. An install disc, like all bootable Mac OS X volumes, contains a bunch of hidden files and directories that are essential for booting, and a Finder drag & drop copy misses all of those. So the backup you thought you made is incomplete, and there's nothing you can do to fix it.
You'll have to get your hands on a replacement set of install discs. If it was a retail Leopard DVD your only option (if it is truly lost) will to be to buy another one, I'm afraid to say.
In the future, a good way to make a backup copy of the Leopard install disc is to use Disk Utility to make a disk image of it. You can then burn a copy of the disk image to a DVD+R DL disc if you want, and boot from that.

Trouble with install disks - is it OK to make a copy of them?

Finally, I am trying to make a copy of the install disks that came with my MBP. This was recommended in several threads for preserving the original and having backups just in case.
I used Disk Utility to make a disk image - choosing DVD/CD master, no encryption - as I was instructed on another thread. I made the disk images fine of the 2 disks - they are now saved as disk images in the .cdr format. While I was at it, I made a disk image of the TechTool Deluxe CD that came with my AppleCare.
When I inserted a CD (and then I tried a DVD) into the slot to Burn the disk image of the first (and then the second) install disk, I got the message that there is not enough room on the disk I am trying to use (for either disk). I had no trouble burning a disk of the TechTool Deluxe - I did that on a CD.
When I go to Get Info for the disk image for the 2 install disks, it looks like each is no larger than 5 plus GB, which seems strange.
What am I doing wrong?
Mrs H

When you make images of the discs, it is compressed. So when you get info of the image, that is smaller than the actual disc size. You said disc two was 3.97gb but really uncompressed it is likely over 6GB. For both install discs one and two, you need dual-layer DVDs to burn.
Thanks for your help, mdpeterman.
I wondered about the compressed issue - but since I chose CD/DVD master, (from Disk Utility Help: "If you want to use the disk image with a third-party application, choose CD/DVD master. The disk image contains a copy of all sectors of the disk, whether they're used or not, and copies them to other CDs or DVDs bit for bit") with no encryption I assumed that the size of the disk image was identical to the original.
What you say tells me I'm wrong - that even with DVD master bit for bit, the image is compressed. Right?
I'll get back to you when I have solved this...
Mrs H
Mrs H

Install Disks

Similar Messages

Maybe you are looking for