Install drivers (help)

I have an 2gh Core 2 duo Imac and I recently installed windows XP to it using bootcamp. Then I used my Leopard install DVD to install the drivers. Everything seems find except that Windows XP can't find my wireless card. I think the problem may be that I didn't use the OS install DVD that came with my Imac (lost it) and I used the Upgrade DVD to move upto Leopard. I tried searching with google to help fix my problem with no luck at all. Is there a way to make my mac burn a disk with the correct drivers or maybe a way to get the correct drivers online? Any help would greatly appreciated.

Not quite sure what version your using for an OS. What version is your Upgrade disk? Leopard or Snow Leopard?
It's been awhile since I've used an upgrade disk but you should (?) be able to use the upgrade disk to install the drivers.
Just insert the Leopard upgrade disk while booted in Windows and see if it will install or "repair" the drivers and then use the Apple updater in Windows to update the drivers.
You might also try downloading the 2.1 Boot Camp drivers for XP from the Apple Downloads page and see if that helps. Don't forget to update to 2.2 after your done.
You won't be able to use 3.0 as it only comes on the Snow Leopard disk. There is no other way to get it. You cannot use 3.1 or 3.2 without having 3.0 installed first.
You can also contact Apple to sell you another copy of your original disk for a replacement cost.

Similar Messages

Cannot install drivers- HELP!!

The issue right now is that my laptop (gateway) is NOT recognizing my iPod and itz driving me mad!! I think I have found the root cause. When I plug my iPod in and go to device manager....it comes up as "unknown device". I right click and device status says that there are no drivers for this device. So I try and install the drivers (usbstor.sys and usbstor.inf)...i've done this several different ways....directing it to the CD that came with the iPod....pointing it to C:\program files\windows\inf...etc.
The message that keeps popping up is "Cannot complete hardware update....no suitable drivers were located that better fits the software already installed..." or something along those lines. I'm at work right now so I can't remember the exact wording...I will post some screen shots when i get home.
Here's all the things i have done so far:
- exchanged iPod
- uninstalled/reinstalled itunes, ipod setup
- removed all itunes, ipod and quicktime
- cleaned out my temp files
- i have reset my system settings to a date prior to when i started having issues with my iPod
i have no idea what the issue could be. When I check the USB port for drivers when my iPod is unplugged...it shows two drivers....usbhub...and something else.
I read somewhere that I should check the INF file to make sure that my device is on there. I did this right before leaving for work and did not see "Apple" or "iPod" or anything of that sort on there. Could this be the issue? I did not have time to check my device name and see if it was listed but I will when I get home.
Any suggestions?? anyone with the same issue and solution??...any help would be greatly appreciated. Right now i have a wonderful $300 machine that is useless right now. Also, i am running on windows XP home....and when I first got my iPod...everything was working ok until one night i left it connected to my comp overnight....and the next morning my comp was not recognizing it.....

Go to the site where you get the drivers from and select correct version of drivers then download again it will get solved possibly
do reply
cheers TGT

Can't install drivers, help!

So after my 4 year old Macbook began having serious issues that Apple could not figure out they decided to give me a new computer to replace it. And since the old Macbook had a Firewire port, and the new ones do not, they upgraded me to the 13" Macbook Pro. On my old system I was running OS10.6.3 with the most updated version of Windows XP on the 40GB partition. I used Winclone (recommended as a full backup software by the Bootcamp tech at Apple Care and cloned my XP onto an external drive. I got the MBP and it has the configuration below. I partitioned the drive as an NTSF successfully. I then used Winclone and was able to successfully load my Windows clone from my old computer. Much to my delight Windows booted up and seemed to work fine. Then I started getting "new hardware found" popups like crazy. It is also asking me to register the copy of Windows. So I inserted the OSX disk and tried to load the drivers. It loaded the NVIDIA drivers successfully. However as the computer starts trying to load the "Keyboard drivers" it does not progress, even overnight. I followed Apple's bootcamp instructions and used Windows Explorer to locate the individual drivers on the disk. They act like they are loading but never do. Then I tried going on line to search for drivers, but found that I do not have wireless (drivers I assume) on the Windows side. Also, the SPSS software, which was the only reason for me to put Windows on the MBP, now says it is not licensed. So I need help figuring this out. Any further info needed please let me know.
Hardware Overview:
OS: 10.6.3
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP71.0039.B05
SMC Version (system): 1.62f5

Hi,
transfering a Windows installation from one computer to another one is always a feat.
The outcome can range from 'it worked' to not even be able to boot, due to the very nature of different hardware components.
Microsoft offers a tool called Sysprep http://support.microsoft.com/?scid=kb%3Ben-us%3B302577&x=7&y=11 for such a task, but for you it is now useless.
XP wants to be reactivated due to these hardware changes. Maybe with SPSS ist's the same.
What you may try, short of a complete reinstall of Windows and SPSS, is to completely remove the old Apple BootCamp Drivers (via Control Panel - Software) and then use the OSX DVD that came with your new MBP to install the Drivers from scratch.
If you can't successfully boot into XP the normal way, you can try the safe boot options as described in here http://support.microsoft.com/?scid=kb%3Ben-us%3B315222&x=10&y=11
For just troublesome graphics driver, DriverSweeper is a tool you can use http://www.guru3d.com/category/driversweeper/
Hope it helps
Stefan

MSI K8T Neo2 FIR, need help installing drivers

Hi there,
I need help with installing drivers. Here’s my setup:
CPU: AMD Athlon 64 3500+
Mainbord: MSI K8T Neo2 FIR (VIA K8T800Pro)
OS: Windows XP Professional, SP2 installed
ATI Radeon 9600 Pro
I updated per MSI Live Monitor, but when I run ‘dxdiag’, I says I have to update the ‘VIA standard host bridge’. I don’t know what this is or where it can be found. It could be I saved the updated drivers in the wrong file (F:\ Program Files\...) where F is my primary harddisk and the drivers should be saved in F:\Windows\ System 32.
Also, my hardware setup tells me there are two videocards 'installed': a Radeon 9600 Pro and a radeon 9600 Pro (secundary). Do I need to de-install the secundary one?
Here’s a piece of my most recent dxdiag:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
System Information
Time of this report: 5/22/2005, 10:22:20
Machine name: UIWDC2ARUPUS49X
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: Dutch (Regional Setting: Dutch)
System Manufacturer: MSI
System Model: MS-6702E
BIOS: Version 07.00T
Processor: AMD Athlon(tm) 64 Processor 3500+, MMX, 3DNow, ~2.2GHz
Memory: 1024MB RAM
Page File: 285MB used, 2687MB available
Windows Dir: F:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: No problems found.
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found. DirectPlay test results: The tests were cancelled before completing.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: ATI RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_000217EE&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (16 bit) (60Hz)
Monitor: Plug en Play-monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6546 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 5/4/2005 04:28:54, 226816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n.v.t.
Mini VDD: ati2mtag.sys
Mini VDD Date: 5/4/2005 04:28:34, 1133056 bytes
Device Identifier: {D7B71EE2-0210-11CF-CC6D-0820A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x000217EE
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
Sound Devices
Description: Sound Blaster Live! 24-bit
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Sound Blaster Live! 24-bit
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
DirectMusic
DLS Path: F:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Sound Blaster Live! 24-bit, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI-mapper (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SoundFont Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Muis
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Toetsenbord
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB-hoofdhub
| Vendor/Product ID: 0x1106, 0x3038
| Matching Device ID: usb\root_hub
| Lower Filters: vulfntrs
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:44, 57600 bytes
| Driver: usbd.sys, 9/7/2001 14:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Standaardtoetsenbord (101/102 toetsen) of Microsoft Natural PS/2-toetsenbord
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 8/4/2004 00:55:30, 53760 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ Toestenbordstuurprogramma voor Terminal Server
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ HID-compliant Wheel Mouse
| Vendor/Product ID: 0x046D, 0xC03D
| Matching Device ID: hid\vid_046d&pid_c03d
| Upper Filters: LMouFlt2
| Lower Filters: LHidFlt2
| Service: mouhid
| Driver: mouhid.sys, 9/6/2001 19:04:40, 12288 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
| Driver: LHidFlt2.Sys, 12/17/2003 09:50:00, 25505 bytes
| Driver: LMouFlt2.Sys, 12/17/2003 09:50:00, 70801 bytes
| Driver: Logi_MwX.Exe, 12/17/2003 09:50:00, 19968 bytes
|
+ Stuurprogramma voor muis van Terminal Server
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: The tests were cancelled before completing.
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 TCP/IP Service Provider: LAN-verbinding 2 - IPv4 -
DirectPlay Voice Codecs
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 65.4 GB
Total Space: 76.3 GB
File System: NTFS
Model: ST380011A
Drive: F:
Free Space: 56.7 GB
Total Space: 78.2 GB
File System: NTFS
Model: Maxtor 6Y080L0
Drive: D:
Model: LITE-ON COMBO SOHC-5232K
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
Drive: E:
Model: LG CD-ROM CRD-8521B
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
System Devices
Name: VIA CPU to AGP2.0/AGP3.0 Controller
Device ID: PCI\VEN_1106&DEV_B188&SUBSYS_00000000&REV_00\3&61AAA01&0&08
Driver: F:\WINDOWS\system32\DRIVERS\VIAAGP1.SYS, 5.01.0000.3442 (English), 7/2/2003 04:42:00, 27904 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_7282&SUBSYS_00000000&REV_00\3&61AAA01&0&07
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_4282&SUBSYS_00000000&REV_00\3&61AAA01&0&04
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_3282&SUBSYS_00000000&REV_00\3&61AAA01&0&03
Driver: n/a
Name: VIA Standard PCI to ISA Bridge
Device ID: PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&61AAA01&0&88
Driver: F:\WINDOWS\system32\DRIVERS\isapnp.sys, 5.01.2600.0000 (Dutch), 9/6/2001 18:20:18, 36352 bytes
Name: VIA USB 2.0 Enhanced Host Controller
Device ID: PCI\VEN_1106&DEV_3104&SUBSYS_70201462&REV_86\3&61AAA01&0&84
Driver: F:\WINDOWS\system32\drivers\usbehci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 26624 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Driver: F:\WINDOWS\system32\hccoin.dll, 5.01.2600.2180 (English), 8/4/2004 01:03:12, 7168 bytes
Name: VIA OHCI Compliant IEEE 1394 Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_702D1462&REV_46\3&61AAA01&0&70
Driver: F:\WINDOWS\system32\DRIVERS\ohci1394.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:10, 61056 bytes
Driver: F:\WINDOWS\system32\DRIVERS\1394bus.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:08, 53248 bytes
Driver: F:\WINDOWS\system32\DRIVERS\nic1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 61824 bytes
Driver: F:\WINDOWS\system32\DRIVERS\arp1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 60800 bytes
Driver: F:\WINDOWS\system32\DRIVERS\enum1394.sys, 5.01.2600.0000 (English), 8/17/2001 23:46:40, 6400 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&83
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&82
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&81
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&80
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_2282&SUBSYS_00000000&REV_00\3&61AAA01&0&02
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_1282&SUBSYS_00000000&REV_00\3&61AAA01&0&01
Driver: n/a
Name: VIA Bus Master IDE Controller
Device ID: PCI\VEN_1106&DEV_0571&SUBSYS_70201462&REV_06\3&61AAA01&0&78
Driver: F:\WINDOWS\system32\DRIVERS\viaide.sys, 1.00.0001.0001 (English), 8/3/2004 22:59:44, 5376 bytes
Driver: F:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:42, 25088 bytes
Driver: F:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_0282&SUBSYS_00000000&REV_00\3&61AAA01&0&00
Driver: n/a
Name: Sound Blaster Live! 24-bit
Device ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00\3&61AAA01&0&30
Driver: F:\WINDOWS\system32\ksuser.dll, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:14, 4096 bytes
Driver: F:\WINDOWS\system32\ksproxy.ax, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:38, 130048 bytes
Driver: F:\WINDOWS\system32\drivers\ks.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:15:22, 140928 bytes
Driver: F:\WINDOWS\system32\drivers\drmk.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:00, 60288 bytes
Driver: F:\WINDOWS\system32\drivers\portcls.sys, 5.01.2600.2180 (English), 8/3/2004 23:15:50, 145792 bytes
Driver: F:\WINDOWS\system32\drivers\stream.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:08:04, 48640 bytes
Driver: F:\WINDOWS\system32\wdmaud.drv, 5.01.2600.2180 (English), 8/4/2004 01:03:40, 23552 bytes
Driver: F:\WINDOWS\system32\CtDvInst.dll, 0.00.0000.0008 (English), 7/25/2003 11:35:48, 131072 bytes
Driver: F:\WINDOWS\system32\drivers\ctoss2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:47:38, 178672 bytes
Driver: F:\WINDOWS\system32\drivers\ctsfm2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:48:06, 130192 bytes
Driver: F:\WINDOWS\system32\sfman32.dll, 5.12.0001.0130 (English), 8/17/2001 08:35:46, 36864 bytes
Driver: F:\WINDOWS\system32\sfms32.dll, 5.12.0001.0172 (English), 9/22/2003 02:51:52, 172032 bytes
Driver: F:\WINDOWS\system32\ct2mgm.sf2, 9/22/1999 09:18:00, 2167684 bytes
Driver: F:\WINDOWS\system32\P17res.dll, 5.12.0001.0308 (English), 3/29/2004 04:02:48, 136704 bytes
Driver: F:\WINDOWS\system32\P17.dll, 1.00.0001.0029 (English), 4/8/2004 04:37:40, 60928 bytes
Driver: F:\WINDOWS\system32\drivers\P17.sys, 5.12.0001.0314 (English), 6/4/2004 10:27:46, 840960 bytes
Driver: F:\WINDOWS\system32\drivers\Pfmodnt.sys, 3.00.0000.0003 (English), 3/5/2003 12:19:28, 15840 bytes
Driver: F:\WINDOWS\system32\A3d.dll, 80.00.0000.0003 (English), 4/11/2002 03:41:06, 65536 bytes
Driver: F:\WINDOWS\system32\P17CPI.dll, 1.00.0000.0002 (English), 10/2/2003 12:48:18, 53248 bytes
Name: Ethernet-controller
Device ID: PCI\VEN_10EC&DEV_8169&SUBSYS_702C1462&REV_10\3&61AAA01&0&58
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&61AAA01&0&C3
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&61AAA01&0&C2
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&61AAA01&0&C1
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&61AAA01&0&C0
Driver: n/a
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Help would be very much appriciated, thnx!

The two vis.cards issue is normal, it sees the primary output (VGA) as a device and the TV-out a separate device.
Go to device manager to see if there's any device on ur rig that doesn't have drivers.
Did u install the 4-in1 drivers, get the latest version from the MSI support site.
good luck.

I need help installing drivers...

I recently bought this computer used from a large corporation. They removed the hard drive, but left the rest of the computer intact. I put in a new hard drive and installed Windows 7 on the computer. My problem now is I need to install the drivers for the computer, as it has none installed. I went to the HP driver download site and they only have drivers for windows 8.1. I still used my other computer to download the driver and then used a flash drive to install to my computer. It would not install as it is the wrong os. How can I install drivers on the computer? Please, help. thank you.

Hi: See if some of the W7 x64 drivers from this model work on yours. Do not use any of the BIOS or firmware files. http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-700-200-Desktop-PC-series/5399651/model/6667346 It has a similar hardware configuration but not exactly the same. Let me know what devices are left that still need drivers.

Need help with installing drivers

I recently installed Windows 7 Professional and have been having trouble with installing the drivers necessary for sound, USB, graphics, etc. I have the Windows drivers on an external drive, but the OS won't recognize an external drive because it needs the drivers to do so. My Macbook came with OS X 10.6 installed, but I have since upgraded to 10.7 through the App Store. I believe I can use my 10.6 factory DVD to install drivers on the Windows side, but if I have 10.7 installed, will it work right? I'm confused

IME driver is one of the very most important. TPM is only needed if you plan on using it. If you don't know what it is, then probably don't need it.
Quote
Please tell me in detail what drivers do what functions and which ones need to install ?
Most of them are pretty self explanatory. Unless you set the SATA controller to AHCI mode when the OS was installed, RST isn't going to do much.
Like Henry said. Everything is on the install disc that came with the mainboard you need, including the ones you don't need. It's even got a 'total install' selection.

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

HT2305 I have a new computer with Windows 8 OS. Do I need to install drivers so that my Ipod Nano will sync with this new computer:

My daughter gave me a new Ipod (Nano) for Christmas. I had no problem download my songs from my old Ipod (Shuffle) to the new one. However - since I do not buy songs on a regular basis, I did not buy a new song until 4/29/13. Now for information...sometime in March my old laptop died, completely. I had to go buy a new one - which I did and this new one has Windows 8 Operating System on it (which I hate, btw).
Now, when I bout a song on Tuesday, the song did not go to my new Ipod. I tried everything and finally had to talk to a tech - who was very kind in helping me and we did get all my songs from Itunes to this new computer. I thought the song I bought would then go on the Ipod - but it did not. I had already hung up from the tech - since we had been talking on the phone for about an hour. He informed me that he was giving me a "courtesy break" because it has been over 90 days since my new Ipod was purchased ---- just my darn luck!
Anyway, I have figured out on my own that the new Ipod Nano is not synced with the new laptop with Windows 8. I have been trying for the last 2 hours to get it to do so and in doing so, found out that Windows 8 is not mentioned in any of the help forums. So...my question is: Do I need to install drivers on the computer or what? I will not be purchasing anymore music from Itunes until I get this matter resolved. Any help will be apreciated. Thank you.
Judy1942

Try http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer

Vista 32 - ipod not recognized, failed to install drivers, disconnecting

Hi to all,
I have experienced a problem with my brand new Ipod classic 80GB and was flustrated by it. It took me some time ro research internet to find a fix for this problem and i would like to share it with you to have it at one place. If such article exists here i appologize, i did not find it myself.
_The problem:_
Ipod in Windows Vista 32 *cannot find/install drivers*. Ipod shows up for couple of seconds and then *automaticaly disconnects*.
Solution:
i have found solution that worked form me at this site
[http://teknobabble.wordpress.com/2007/08/18/vista-driver-problems-installing-a- usb-media-reader-a-solution>
Thanks to the autor of this article and i hape this helps some of you having the same problem as i had

Can you be specific as to what drivers are not installing? An issue that can be had when doing PNPEnum is that child devices of something that does not have a driver installed are not visible to the PNPEnum. A way to get around that is you can force the
injection of drivers that are not getting installed. Something like you can add a second Inject Driver step but, have it be a selection profile of drivers that always get missed because they are children.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Can no longer install drivers and touch screen not working anymore

I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!

Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

IPod Nano (4GB) Not Installing Drivers

I ran the installer software on the installation CD and re-booted as instructed.
On re-boot Install Shield dialog box comes up does something and then goes away. Boot continues normally.
Checked iPod Service and it is running.
Plugged in iPod and Windows tells me that it has found new hardware and wants to install drivers. Device Manager shows "iPod" under "Other Devices." I let it search for drivers but it doesn't find them.
How do I get the driver installed!?!
Thanks.

hmmmm. ipods use the standard Windows USB mass storage drivers. so if it's asking for drivers at that stage of proceedings, the techniques in this MarkJones post might be of some help:
MarkJones: Re: Windows XP (SP2) Laptop only finds generic "New USB 2.0 Device"

Cannot install drivers. No Intel(R) Adapters are present in this computer

Cannot install drivers. No Intel(R) Adapters are present in this computer
Cannot install drivers. No Intel(R) Adapters are present in this computer
Reads the error message I purchased an RaLink USB Wireless adapter IEEE 802.11 b installed in an XP Pro system, an Intel D925XEBC2 MB with A P4 CPU 3.80 GHZ
I have 4 gigs of RAM installed but it reads only 2.87 RAM on system properties
I installed the RaLink Drivers and the Ralink interface. I get a strong signal and see that the wifi is there but cannot connect. The 1394 Net adaptor #2 is showing as is the USA wireless card
I was asked to install the PIN which I assumed meant the network security but my keyboard will only input numbers not the letters, otherwise the keyboard operates properly on notepad but not on the RaLink software
Under other devices it shows both the Ethernet controller and the Network controller with a question mark "?".
I have tried uninstalling and starting the computer several times but they will not install correctly.
The windows interface shows no wi fi system at all. After going back and forth now both windows and the RaLink interface shows no wifi system.
When I went to https://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=18717 and downloaded the 32 bit file and tried to install it I got the error.

Hi there,
you're in the wrong forum, but I'll try to guide you.
(a better forum for your question would likely be this:
http://social.answers.microsoft.com/en-us/windows/forum/networking?tab=Threads )
Your RALink wireless adaptor is not manufactured by Intel, that's why Intel driver download won't help you.
You need to go here (RALink is now Mediatek) to get the drivers for your adaptor
http://www.mediatek.com/en/downloads/
Good luck! :)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Officejet 7500A installing drivers, missing dll file, can't scan

I have a new laptop with Windows 7 Professional, using first the cd, I installed drivers to use my Officejet 7500a on my wireless network, during installation it said it could not find file HPWia2_OJ7500_E910.dll and asked if I wanted to continue. I did and in the end could not set up the scanner. So per HP website and uninstalled all software and reinstalled, this time from the HP site. Same exact thing occurred. Again, worked through the process and uninstalled and reinstalled drivers again, same problem, "can't find file". Scanner is the one thing that doesn't work. Printer appears to work fine but I really need to scan as well. Thank you in advance for your assistance.

Hello aaatexas,
Welcome to the HP Forums.
I see that you are having an issue with installing the printer.
I'm going to give you a Microsoft link that will show you how to do a clean boot in to the computer. Once the clean boot is finished and the computer is restarted, please attempt to reinstall the software and drivers for the printer.
Here is the link for the instructions on How to perform a clean boot in Windows.
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Is it possible to install Windows 7 without using BCA to install drivers and using the support 5 software for drivers on my iMac 2014?

What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

HT4818 I can't install drivers Nvidia Geforce GT120 Boot camp windows 7

I was using windows vista in Boot Camp, but now I installed windows 7. My problem is I can't install the drivers of the Graphic card Nvidia Geforce GT120 using the CD drivers. However, I tried to download directly from the webpage Nvidia.com/drivers but at the moment to running the installation assistants, it doensn't detec any graphic hardware.
Please help me!
Thank you!

I can solve my problem! I used a programme called 3dchip that helps to the computer to recognize and install drivers!
Thank you mende1 for your time.
Nice to enter in your community!
Arn267

Install drivers (help)

Similar Messages

Maybe you are looking for