Install Essbase App on SAN (v11.1.2)

Has anyone installed the entire Essbase application on a Storage Area Network (SAN) drive in Windows environment? If so, what has been your experience? Faster / slower performance? Any risks should the SAN configuration change on the back end?
In the past, Essbase was always installed on a local D:\ drive and the E:\ drive was used for page and index files.
Current setup
1) C:\ Operating system
2) D:\ Essbase application (essbase.exe, etc) and other non-Essbase apps on a local drive
3) E:\ Essbase page and index files on a SAN
Proposed setup
1) C:\ Operating system
2) D:\ Other non-Essbase applications on a local drive
3) E:\ Essbase application (essbase.exe, including page and index files) on a SAN
Any comments are appreciated.

http://www.network54.com/Forum/58296/thread/1302711904/Install+Essbase+App+on+SAN+%28v11.1.2%29
Regards,
Cameron Lackpour

Similar Messages

Installing Essbase V11.1.2.1

Hello,
We currently have Essbase V9.3.0.1 installed on 64-bit Solaris SPARC. We are looking to install the latest version of Essbase V11.1.2.1 and only Essbase - not interested in any of the other products that seem to come along with it. Is this a possible migration path? I understand the documentation states there are certain migration paths, but it also seems to indicate that it is only if you are using licensing and provisioning, which we are not. We basically just want to install the new version and migrate the data/cubs over to the newest version.
In one single folder I have downloaded all of the EPM products and the System Installer and I believe I have correctly installed just Essbase (and the Foundation Services - not sure if those are necessary). My biggest concern is that the previousl install path was /usr/local/essbase and when I installed EPM (which I assume is just a renamed Essbase) it installed to /essbase11121/Oracle/Middleware/… (etc). Just not sure if I have the correct product installed.
Would anyone be able to point me in the direction of documentation and/or install binaries that will allow me to just install and run Essbase V11.1.2.1 so I can confirm with my team that it has been installed correctly.
Thank you in advance for your help.

John - thank you again for all your help.
I reached out to someone on my team who is familiar with our current Essbase environment and they gave me this information and has a few questions about the migration/upgrade. If you or anyone could be of help with these, it would be greatly appreciated.
In our current essbase setup we have applications configured under /usr/local/essbase/app/ folder and under it we have different folders for different applications. All these applications stores it's metadata , logs, data under the defined directory structure - we have stores data in files. So as you can see the path for the data file is /usr/local/essbase/app/APP_NAME/default - the .dat file is the data.
Here, if you are planning to use the migration wizard , please try to check on the following points:
1. You need to have the Existing 9.3.0 application in place along with the new version 11.1.2.1 in the same machine ? ( or in the same machine could we use the migration wizard with the same application name ? ) .
2. Migration wizard should move all the artifacts (rule files, filters (user/group access) etc.
Thanks again for all your help.

Error 404--Not Found - After Installing Essbase 11.1.2.2

Hi,
I have experienced error.
I have one box of EPM 11.1.2.2, using Windows 2008. After installing Foundation and configuring it, there's no problem at all. I can open workspace and interop as well.
However I added Essbase, installing and configuring it. But after installing Essbase, I managed to turn on Hyperion Shared Service again, it didn't work.
The error says:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
What I have done is reconfiguring Shared Service, Essbase also. But no luck at all.
Does anybody have the clue, please advise. Thanks.

Hi John,
I got error like this on the log:
<Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jun 15, 2012 1:06:18 AM ICT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jun 15, 2012 1:06:19 AM ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
<Jun 15, 2012 1:06:20 AM ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jun 15, 2012 1:06:22 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 15, 2012 1:06:22 AM ICT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jun 15, 2012 1:06:22 AM ICT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
<Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 15, 2012 1:07:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:07:45 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:08:10 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:11 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
COMP ID = oracle.EPMOHPS
Hyperion Provider Services - Release 11.1.2.2.100.2167
Copyright (c) 1991, 2012 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
<Jun 15, 2012 1:08:12 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
javax.servlet.ServletException: Cannot initialize Provider Services server framework.
     at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'APS [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
javax.servlet.ServletException: Cannot initialize Provider Services server framework.
     at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: javax.servlet.ServletException: Cannot initialize Provider Services server framework.
     at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
Essbase® Administration Services - Version 11.1.2.2.100.2176
Copyright © 1991, 2012 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Fri Jun 15 01:08:14 ICT 2012
Server started successfully
Waiting for client requests
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:16 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
**********Getting connection from hub connection pool..Testing JNDI connection....
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
javax.servlet.ServletException: DSF initalization error null
     at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SHAREDSERVICES [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
javax.servlet.ServletException: DSF initalization error null
     at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: javax.servlet.ServletException: DSF initalization error null
     at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "prefs" failed to preload on startup in Web application: "workspace".
EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
     at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
     at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
     at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
     at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
     at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
     Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'WORKSPACE [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "prefs" failed to preload on startup in Web application: "workspace".
EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
     at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
     at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
     at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
     at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
     at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
     at com.hyperion.css.CSSSystem.initCSSSystem(CSSSystem.java:318)
     at com.hyperion.css.CSSSystem.getInstance(CSSSystem.java:272)
     at com.oracle.workspace.Repository$PrefsStore.initialize(Repository.java:2917)
     at com.hyperion.bpm.prefs.PrefsServlet.init

How many macbooks can you install an app on, how many macbooks can you install an app on

I want to know if it is acceptable to install an app purchased on one macbook on a second macbook?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The license for apps from the Mac App Store (MAS) allows you to install the app on as many Macs as you own or have in your control, such as a Mac from an employer or educational institution.

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Trouble installing the apps after downloading Adobe Creative Cloud

I am having trouble installing the apps after downloading Adobe Creative Cloud. The following Error messages show up:
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\KATHER~1.CDA\AppData\Local\Temp\{63EDD438-B4D0-424C-B05A-7990C09D955C}\Illustra tor_1

Third party payload installer vcredist_x64.exe failed with exit code: 2147942750

Adobe Creative Cloud app not displaying already installed apps and can't install new apps Mac OS 10.9

Hi,
I've been using the new Adobe Creative Cloud 2014 for a couple weeks now perfectly fine, until yesterday. I use Photoshop, Illustrator, and After Effects quite extensively. This morning, I opened the Adobe CC app and all but Adobe Acrobat Pro show installed. The other already installed apps have buttons to "install" but clicking this button shows the "Exit Code: 7 - Unable to complete Silent workflow" error in the logs. Ive tried disabling my Sophos antivirus program and restarted several times. The already installed applications themselves seem to function normally, they open and work projects. I've even tried to uninstall one of the already installed programs (Bridge) and it fails to uninstall, saying I need to restart my computer and disengage my anti-virus, which I've done. I've uninstalled and reinstalled the Adobe CC app as well, and have the same result. Help.

So I've completed the solutions listed in the help article with no changes. Here is how it has gone with each solution listed in the article. Also, it is not clear in the article whether these steps are to be done in sequence or may solve the problem individually, but since Solution 1 fails for me, doing them in sequence was impossible.
Solution 1: Mac OS: Run the uninstaller in the Applications/Utilities/Adobe Installers folder to remove the program listed as up-to-date.
This does not work because uninstalling any of these applications does not work. As I stated in the post, the uninstaller for all of my adobe applications (photoshop, bridge, indesign etc) throws the same error each time saying I need to: restart my computer (done) close all applications (done) and disable my antivirus (done, which was fully engaged when I installed the apps originally with no issue) and disable my firewall (done, I don't use one). Not sure what I'm missing on that, plus its a real bummer that I need to reinstall all of my CC apps even if the uninstaller did work because my creative cloud app won't recoginize they've been installed.
Solution 2: Remove the OPM.db file and relogin into the Creative Cloud desktop application using the Adobe ID tied to your subscription.
This did nothing.
Solution 3: Download and install the latest version of Adobe Creative Cloud desktop app from Creative Cloud for desktop.
This did nothing.
Solution 4: See the steps listed in Solution 1 to remove all installed Adobe Creative software. Once all Adobe Creative software has been removed, use the CS Cleaner Tool to ensure a complete removal. You can find details in Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6.
This did not do much because I can't uninstall the software to begin with.
What am I missing?

I deleted the pre-installed iPhoto app from my iPhone 5s by mistake. And I can't find the same app in the App Store. How do I recover it?

I deleted the pre-installed iPhoto app from my iPhone 5s by mistake. And I can't find the same app in the App Store. How do I recover it?

iPhoto for iOS is no longer being offered by Apple and has been replaced by the Photos app. It is not compatible with iOS 8. This Apple document may help: Migrating from iPhoto for iOS to Photos on iOS 8 - Apple Support

I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my p

I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?

Hi Susan,
Please refer to the help document to fix this issue:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
You may also refer to the thread as below:
creative cloud software says my free trial has expired, but I have a paid subscription
Regards,
Sheena

HT4623 I want to install an app that requires iOS5 and my iphone is 4.2.6 How do I Update my software for my iphone 4?

I want to install an app that requires iOS 5 update. How do I update the software on my phone when I do not have the icon in settings for update software? Please help!

Connect your iPhone to iTunes, and find Software Update in the main interface pane. It should prompt you to install iOS 5.1.1.

Can't download anything from app store or itunes. everytime i try to install an app i get "there is abilling problem with a previous purchase. please update ur payment method". i have recently changed my address and visa debit card. please help

can't download anything from app store or itunes. everytime i try to install an app i get this error "there is a billing problem with a previous purchase. please update ur payment method". i have recently changed my visa debit card and home adress and when i make these changes i still get the same error.
will u please help me out?

Are you listing the billing address for the card correctly? The address in the iTunes/MAS account must match the address on your bill exactly.

I am trying to install an app. When I click install, my old gmail account shows and asks for my password etc but I have a new gmail account that is associated with my apple id. How can I get it to default to the new gmail?

I am trying to install an app in my iphone. When I click Install, my old gmail account comes up for verification and it asks for my password etc. I dont use this account anymore and have a new gmail account that is associated with my apple account. How can I get the new gmail to default when I am trying to install apps?

Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID.

I get error 0x80073cf9 now and I need help to FIX Windows Store can't update any Apps & can't install any Apps now?

Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now.   This has been going on since April and May and its driving me crazy!    And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems.   I have read so many how to fix this error code but nothing works! :-(     I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes.   And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code?   And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?

Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.

HT4993 i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?

i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again.

How Can I Simulate Double-Clicking A File To Open It In The Default App Without Installing Default App?

I have an app written with Visual Studio 2013. The app has code for opening a file using the standard OpenFileDialog and also has code (AutoOpenFile()) for opening a file when a user double-clicks on a file that is handled by the app. I have not yet created
an installer for the app, so I won't be able to test it's AutoOpenFile() code...unless there is a way to simulate the process of auto-opening the double-clicked file without actually installing the app on my PC. Anyone?

Thanks for your reply, Wyck. I already have the necessary code in my app for opening a file when I double-click on it. The problem is that the app is not currently installed on my PC. Until I do install it, is there a way I can test-run that code
by double-clicking on an associated file?
You lost me at: you want to test-run code that is not on your PC.
O_o
You want to double-click a file, and then...what do you want to have happen? You want to run...something...that is not on your PC??
The "simulation" is to launch your app from the command line and pass in the name of the file you wanted to simulate a "double-click" of.
Regardless, you cannot get the shell to have a double-click of a file cause your application to launch unless you modify the registry to do so. (This is tantamount to "install" to me.)
In the spirit of continuing to be helpful, though, I'll assume that this is what you want to do and I'll show you how to get it done with the least amount of tampering with your registry.
Here are minimally invasive registry modifications you need to make to get it to launch a program when you double-click your file. It's pretty small.
EXAMPLE ONLY:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.wyck]
@="Wyck.Document"
[HKEY_CLASSES_ROOT\Wyck.Document\shell\open\command]
@="c:\\windows\\system32\\notepad.exe \"%1\""
[You have to save the above with your appropriate modifications to a file with the
.reg extension (e.g.: test.reg) and then you'll have to double-click the test.reg file to "merge" these settings into your registry.]
The example above registers a file extension called .wyck and assigns a completely arbitrary class name to it called
Wyck.Document.
Then it associates a shell open command with the Wyck.Document class that causes
notepad.exe to be passed the filename of the file you double-clicked (that's what the
%1 does). You are welcome to replace all the specific names with your own extensions and class names and replace notepad.exe with the path to your (test) executable.
This executable will be launched, but not with a debugger attached. To facilitate debugging it, you'll want to temporarily add some code to your program to pause when the program launches, possibly by showing a message box right at the very beginning
of your main function that says "attach debugger now" so that you can attach a debugger to the process that was started by the shell, and then dismiss the message box and continue debugging.
When you are done with your testing, you can simply manually delete those two registry keys using
regedit.

Install Essbase App on SAN (v11.1.2)

Similar Messages

Maybe you are looking for