Install Exchange 2010 Sp3 on Windows 2012 R2

Dear All,
From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
Thank you

The prerequisite check is checking that the required Windows components are installed.  Exchange 2010 is still not supported on Windows Server 2012 R2.

Similar Messages

  • Problems with OWA after installing Exchange 2010 SP3

    Hi,
    I just installed Exchange 2010 SP3 on a SBS 2011 machine. The installation completed successfully, but after the installation OWA isn't working anymore. When I browse to OWA I get the following message:
    I did a reset for the OWA vritual directory, but nothing helps..
    Stack Trace: 
    [NullReferenceException: Object reference not set to an instance of an object.]
    Microsoft.Exchange.Clients.Owa.Core.Logon..ctor() +28
    ASP.auth_logon_aspx..ctor() +17
    __ASP.FastObjectFactory_app_web_9ficbu1h.Create_ASP_auth_logon_aspx() +30
    System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +137
    System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath) +49
    System.Web.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +424
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +262

    Hi Alelieveld,
    When you reset a virtual directory, the virtual directory is removed and a new virtual directory with default settings is created.
    After you reset the VD, did you restart IIS?
    For more information, please see:
    Reset Client Access Virtual Directories
    http://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
    Frank Wang
    TechNet Community Support

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Exchange 2010 SP3 RU5 on 2012 r2 - yei or nei

    Guys, one question:
    On this link:
    http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
    I see that Exchange 2010 SP3 with RU5 is not supported on 2012 r2 and is only supported on 2012 server.
    One dumb question: But what if you have 2012 r2 domain controller, can you put exchange 2010 sp3 ru5 there?
    bostjanc

    Ok, but even if that worked for you it doesn't mean that it is supported (because its not) and it wouldn't be a good idea to put that server in production. If your plan is to stay on Exchange 2010, then you should install it on a supported OS.
    Martina Miskovic

  • Issue while installing Exchange 2010 SP3 in SBS 2011

    I tried installing the SP3 on my SBS 2011 box but it asked for a Hotfix from KB2550886 to be installed. When I tried to install the Hotfix it said that it does not apply to my SBS 2011 box and did not install. However I went ahead with the installation
    of SP3 but it stopped just before the final action. Thereafter I was unable to access my Exchange and in services the Microsoft Exchange Transport service kept on stopping despite starting it manually. Spent more than a day trying
    to resolve the issue but when nothing came forward I had to rebuild my server (you may disagree with this step but I had no other solution) over the weekend.
    I tried installing the SP3 but again it asked for the Hotfix. I have not proceeded with the installation of SP3 but have installed the SP 2 which I had preserved.
    MS Exchange Best Practices Analyzer shows "Exchange store does not start". However when I follow the information in KB285116 I observe that everything is in order.
    I would like to know the experience of other persons in this forum before I start the installation of SP3 once again.
    Thanking you in advance.
    Regards, Rajiv K Khandelwal

    Hi,
    After stopping the AV program services I tried installing but landed with the following problem:
    Connecting to "SERVER.domain.local"
    Logging in as current user using SSPI
    Importing directory from file "C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema0.ldf"
    Loading entries
    1: CN=ms-Exch-ELC-Expiry-Action,CN=Schema,CN=Configuration,DC=DOMAIN,DC=local
    Entry DN: CN=ms-Exch-ELC-Expiry-Action,CN=Schema,CN=Configuration,DC=DOMAIN,DC=local
    Add error on entry starting on line 1: Operations Error
    The server side error is: 0x21a2 The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner.
    The extended server error is:
    000021A2: SvcErr: DSID-030A0AE6, problem 5012 (DIR_ERROR), data 8610
    0 entries modified successfully.
    An error has occurred in the program
    I tried the solution as provided in
    http://social.technet.microsoft.com/Forums/exchange/en-US/de047852-fa94-4327-b518-94d6b25b1101/schema-error but did not succeed.
    I am wondering whether to leave the thing as it is.
    Regards, Rajiv K Khandelwal

  • Exchange 2010 SP3 install

    Hi,
    I am running with Exchange 2010 SP1 in DAG & CAS/HUB in cluster mode. need to upgrade to SP3. few things need to know
    1. Schema upgrade will be done I as read in the article. can this create any issue? what is the best measure to safeguard any problems of schema upgrade. Do we do this along with exchange setup or we should run schema upgrade prior to install exchange 2010
    SP3?
    2. Any impact on active sync, outlook anywhere & HUB connectors side post SP3?
    3. Do we need to take any exchange related backups as we are running mailbox, CAS/HUB servers in redundant mode?
    Please share your experiences.
    Regards,
    VIpin

    Hello,
    1. It is a good practice to run schema updates before launching Exchange update. You should also make backups of your domain controllers before any schema updates because these
    particular changes cannot be rolled back easily.
    3. Yes, you should have backups (tested!) of your Exchange servers. Server's redundancy (DAG's, CAS Arrays etc) doesn't protect your servers if the update fails.
    Hope it helps,
    Adam
    www.codetwo.com
    If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
    find the answer faster.

  • Exchange 2010 SP1 Update Rollup 6 to Exchange 2010 SP3

    Hi there,
    I am planning to install Exchange 2010 SP3 next week and after reading some of the related comments on this site I got a little worried.
    Our current Exchange environment consists of the following:
    1 x CAS/HT Server
    2 x Mailbox Server (members of a DAG)
    The OS of the 3 servers is Windows Server 2008 R2 SP1. All servers are running Exchange 2010 SP1 Update Rollup 6.
    The Execution Policies on our Exchange servers are set as follows:
    – CAS/HT Server:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine Unrestricted
    – Mailbox Servers:
      Scope ExecutionPolicy
      MachinePolicy Undefined
      UserPolicy Undefined
      Process Undefined
      CurrentUser Undefined
      LocalMachine RemoteSigned
    Please note that we do not have any Group Policies that defined the PowerShell script execution policy.
    I would be very grateful if you (or any of the kind readers) could help me with following questions:
    1- Do I have to change the execution policy on our Exchange servers before installing SP3? If I have to change a policy, what should I change? And how would you recommend I should do this?
    2- After installing SP3 on a server, can I install the latest rollup update on this server before moving to the next server? For example, can I do the following:
      i. Install SP3 followed by RU 5 on the CAS/HT server -> Apply the our custom settings
      ii. Install SP3 followed by RU 5 on the first mailbox server
      iii. Install SP3 followed by RU 5 on the second mailbox server
    Many thanks,
    M

    Hi Amit,
    Many thanks for the swift reply.
    That's correct.  We didn't set the Powershell execution policy via Group Policy.  We only configured the execution policy of "LocalMachine" to "Unrestricted" on the CAS/HT server using the "Set-ExecutionPolicy" command on the server.
    The mailbox servers' execution policies have not been changed and are set to those values by default.
    I must admit, I go event more confused when I read the "http://support.microsoft.com/kb/2668686" and "http://support.microsoft.com/kb/2810617" articles.
    But it looks like I shouldn't worry as our current Powershell execution policies shouldn't affect the upgrade. Right?

  • Exchange 2010 SP3 Prerequisites

    Trying to run Exchange 2010 SP3 and the prerequisite check indicates I need the following:
    Error:
    Install hotfix Microsoft Knowledge Base article 982867 from http://code.msdn.microsoft.com/KB982867.
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    As far as I can tell that Hotifx is no longer offered.  How do I get this hotfix so I can install Exchange 2010 SP3?

    Is it Windows 2008 R2 SP1 with .NET Framework 3.5 Service Pack 1? Install this...
    http://support.microsoft.com/kb/2637518/en-us
    Blog |
    Get Your Exchange Powershell Tip of the Day from here

  • Exchange 2010 SP3 Create Dynamic DL for Direct Reports

    I am not sure this is possible but if there is a will there is a way I guess.
    System: Exchange 2010 SP3 on Windows Server 2008 R2
    I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports.
    Example: Manager has 5 people that report directly to them, is there a way to make an dynamic email distribution list that will poll the direct reports as people leave or hired.
    I know I can create one manually but some depts. may have high turnover rates which increase overhead so I am just trying to simplify the process. I of course googled my question but not getting the results I intended.
    Thanks. 

    hi,
    as from above  i understand you are asking about creating an custom attribute and then referencing them .. if yes please check below command
    Get-Mailbox -OrganizationalUnit Sales | Set-Mailbox CustomAttribute1 "SalesOU"Now you can create an e-mail address policy for all recipients that have the CustomAttribute1 property that equals SalesOU, as shown in this example.
    New-EmailAddressPolicy -Name "Sales" -RecipientFilter { CustomAttribute1 -eq "SalesOU"} -EnabledEmailAddressTemplates "SMTP:%s%[email protected] check this.. http://technet.microsoft.com/en-us/library/ee423541%28v=exchg.150%29.aspx
    MARK AS USEFUL/ANSWER IF IT DID
    Thanks
    Happiness Always
    Jatin

  • Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3

    After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
    The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook.  It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email.  I easily replicated
    this issue.  For reference:
    Exchange 2010 SP3 RU3
    Windows 7 x64 Ent
    Outlook 2013 (15.0.4551.1004) 32-bit
    I do see that SP3 RU4 has been released, however the only change listed is a security patch.
    Thank you for any ideas.

    Hi, Everyone –
    This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
    over half a year.  It was not fixed in the updates for Patch Tuesday this week.
    I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
    – I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all. 
    The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
    Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
    Regards,
    IT Helper

  • Exchange 2010 SP3 Rollup Update 6

    Our Exchange environment is currently on Exchange 2010 SP3 RU3 and the Forefront Protection 2010 for Exchange server version is 11.0.713.0 (Rollup 3). 
    We planning to upgrade Exchange servers and install Exchange 2010 SP3 RU6, question which I have is it Mandatory to upgrade the Forefront Protection 2010 for Exchange server version is 11.0.727.0 (Rollup 4) before we install Exchange 2010 SP3 RU6 on the
    Exchange servers.
    Thanks,
    AJ

    Thanks Adam for the prompt response and yes I recall these cmdlets to disable and there is a similar cmdlet to enable it. Also after Exchange 2010 SP2 after some RU there is no need to disable FPE before installing RU however it is recommended to disable
    it.
    If you refer the comments section mentioned in the blog below it talks about it:-
    http://blogs.technet.com/b/exchange/archive/2014/05/27/released-update-rollup-6-for-exchange-2010-service-pack-3.aspx
    If you read the comment posted by James Knoch posted on this blog which is as below,
    SP3 & the Rollup Updates are not supposed to require you to disable Forefront anymore, but it doesn't hurt to be safe and disable/enable it anyways. Make sure you are running Forefront Rollup 4 (http://support.microsoft.com/kb/2619883)
    & the latest security update (http://www.microsoft.com/en-us/download/details.aspx?id=41836).
    Above stated confused me a bit, is it mandatory to upgrade Forefront or it is NOT.
    Thanks,
    AJ

  • Cannot install Exchange 2010 on Win Server 2k8R2

    I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
    Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
    Unable to access the 'Default Web Site' on this computer.
    I have checked in Server Manager and IIS is definitely installed.
    I opened the IIS Manager, and from there I *can* browse to the Default Web site.
    For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
    For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
    Any help is greatly appreciated.
    Thanks
    James.

    Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing... 
    Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
    Import-Module ServerManager
    Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
    Set-Service NetTcpPortSharing -StartupType Automatic
    Exchange 2010 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
    Exchange 2010 RC: Quick Installation Guide
    http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
    Amit Tank
    MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
    MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
    Thanks a lot!
    I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
    Ruud van Strijp
    Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP.

  • Exchange 2010 SP3 - RU3 RU4 Public Folders issues ( not refreshing ) when grouping by Categories for "(None)" Group

    After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
    Thx

    Hi,
    From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
    As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
    grouping by flag.
    Should you need more assistance, feel free to tell me.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Exchange 2010 SP3 - Can DAG member be on OS 2012 R2 STD?

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc
    No. It wont let you do that. 
    http://technet.microsoft.com/en-us/library/dd638104(v=exchg.141).aspx
    DAGs are available in both Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition. In addition, a DAG can contain a mix of servers running Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition.
    Each member of the DAG must also be running the same operating system. Exchange 2010 is supported on both the Windows Server 2008 and Windows Server 2008 R2 operating systems. All members of a DAG must run either Windows Server 2008 or Windows Server 2008
    R2. They can't contain a combination of both Windows Server 2008 and Windows Server 2008 R2.
    In addition to meeting the prerequisites for installing Exchange 2010, there are operating system requirements that must be met. DAGs use Windows Failover Clustering technology, and as a result, they require the Enterprise version of Windows.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Error installing Exchange 2010 on Server 2012 R2

    I have the immense displeasure of trying to install Exchange 2010 (migrating from 2003) onto our new Server 2012 R2 server. I get to the install screen when I get this error immediately upon pressing the "Install" button:
    Organization Preparation
    Failed
    Error:
    The following error was generated when "$error.Clear();
     install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema0.ldf")
    " was run: "The system cannot find the file specified".
    The system cannot find the file specified
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Unfortunately there is NO help on the Microsoft site about this error so I have NO clue how to fix this or what file is missing. What do I do next? I'd like to get this installed and running over this weekend. Can anyone shed light on this problem? It's
    2012 R2, just patched the 15 updates that it found BEFORE installing (or attempting I should say) Exchange 2010.

    Hi,
    The support version of Operating system for Exchange 2010 is as follows
    64-bit edition of Windows Server 2008 Standard with Service Pack 2 (SP2)
    64-bit edition of Windows Server 2008 Enterprise with SP2
    64-bit edition of Windows Server 2008 R2 Standard with SP1
    64-bit edition of Windows Server 2008 R2 Enterprise with SP1
    Windows Server 2008 Datacenter RTM or later
    Windows Server 2008 R2 Datacenter RTM or later
    Windows Server 2012 (Requires Exchange 2010 SP3 or later)
    Officially Ms not announced to have Exchange 2010 in Windows Server 2012 R2. Check it out the service pack you are using in Exchange server 2010.
    Try to download new iso image from the Microsoft Volume licensing page or from download site..may the image can be corrupted.
    Ref: http://technet.microsoft.com/en-us/library/aa996719(EXCHG.141).aspx
    Exchange Queries

Maybe you are looking for

  • Boot Camp/Windows XP Pro doesn't work after 10.5.8 Update

    I installed the 10.5.8 update, but then Windows would not boot up under Boot Camp. Anyone else have this problem? I tried several times and even went into Safe Mode to see if I could fix anything. Unfortunately, I'm not a Windows expert, so I really

  • Do you know how to get Tomcat's JNDI example to work? - Help!

    With regards to the example for JNDI Datasource How-To found on Apache's site at http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html I did the example as they explained to. But I keep getting "foo - not connected" when

  • Goods Return to Vendor

    HI we had purchase one material, done  PR, PO, GRIR  103 & 105, Invoice & payment to vendor. now we want to return the goods to vendor and want to take back cash. how to do this. thanks thomas

  • DTS and DD 5.1

    I just purchased a Yamaha 1500 a/v receiver and hooked it up to my dual G5 with a monster toslink cable. I can get audio if i play the dvd in DD 5.1 using DVD Player, but i get no sound when trying to use DTS.... what gives? I was hoping to be able t

  • Spam error

    hello experts,            error while importing packages.            Error in phase : “DISSAMBLE”             Reason of error: CANNOT_CREATE_COFILE.             Return code: 8 any suggestions thnx & regards