Install nagios on solaris 10
hi
can any one help me to install nagios on solaris 10.But i got a document from
www.totkat.org/pages/nagios.shtml. but it is giving errors.
i am expecting your valuable hints to do
I've insaller SUNWlibm and the make is going further now but still ends in a fatal error:
then mv -f ".deps/pst3-pst3.Tpo" ".deps/pst3-pst3.Po"; else rm -f ".deps/pst3-pst3.Tpo"; exit 1; fi
pst3.c:1: sorry, unimplemented: 64-bit mode not compiled in
*** Error code 1
make: Fatal error: Command failed for target `pst3-pst3.o'
Current working directory /usr/share/src/nagios-plugins-1.4.13/plugins-root
*** Error code 1
The following command caused the error:
failcom='exit 1'; \
for f in x $MAKEFLAGS; do \
case $f in \
*=* | --[!k]*);; \
k) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo all-recursive | sed s/-recursive//`; \
list='gl lib plugins plugins-scripts plugins-root po'; for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
make: Fatal error: Command failed for target `all-recursive'
Current working directory /usr/share/src/nagios-plugins-1.4.13
*** Error code 1
make: Fatal error: Command failed for target `all'
another suggestion? the SUNWlibm was necessary so thank you for that.
Similar Messages
-
Error when installing Nagios on solaris 11
Hello,
I'm following these instructions (Building and Deploying Nagios on Oracle Solaris 11) on how to build and install Nagios on a solaris 11 x86 box. I get all the way to pkg install then I receive this error:
root-/opt # pkg install nagios
WARNING: The boot environment being modified is not the active one. Changes
made will not be reflected on the next boot.
Packages to install: 1
Services to change: 1
Create boot environment: No
Create backup boot environment: No
DOWNLOAD PKGS FILES XFER (MB) SPEED
Completed 1/1 1294/1294 15.1/15.1 0B/s
PHASE ITEMS
Installing new actions 1/1407Action install failed for 'nagios' (pkg://ops-software/nagios):
KeyError: 'gid'
The Boot Environment solaris-2-backup-1 failed to be updated. A snapshot was taken before the failed attempt and is mounted here /tmp/tmpeH7KLq. Use 'beadm unmount solaris-2-backup-10' and then 'beadm activate solaris-2-backup-10' if you wish to boot to this BE.
pkg: An unexpected error happened during install: 'gid'
Traceback (most recent call last):
File "/usr/bin/pkg", line 6373, in handle_errors
__ret = func(*args, **kwargs)
File "/usr/bin/pkg", line 6359, in main_func
pargs=pargs, **opts)
File "/usr/bin/pkg", line 2177, in install
update_index=update_index)
File "/usr/bin/pkg", line 1950, in __api_op
ret_code = __api_execute_plan(_op, _api_inst)
File "/usr/bin/pkg", line 1523, in __api_execute_plan
api_inst.execute_plan()
File "/usr/lib/python2.6/vendor-packages/pkg/client/api.py", line 2706, in execute_plan
self._img.imageplan.execute()
File "/usr/lib/python2.6/vendor-packages/pkg/client/imageplan.py", line 4210, in execute
p.execute_install(src, dest)
File "/usr/lib/python2.6/vendor-packages/pkg/client/pkgplan.py", line 516, in execute_install
dest.install(self, src)
File "/usr/lib/python2.6/vendor-packages/pkg/actions/group.py", line 80, in install
if (cur_attrs["gid"] != self.attrs["gid"]):
KeyError: 'gid'
pkg: This is an internal error in pkg(5) version f840f00cdeff. Please log a
Service Request about this issue including the information above and this
message.
root-/opt #
I've installed other packages with pkg so I don't think its a error with the utility. I've tried with 2 different versions of Nagios (4.0.7 and 4.0.8) both times getting the same error. Has anyone seen this error before? any ideas on whats causing it?
ThanksI have not done this myself, and the error you got should be more clear. What version of Solaris 11 are you using? I think the issue may be in the default GID that is assigned. The instructions don't add a GID to the group action:
group groupname=nagios
user username=nagios group=nagios
The pkg(5) manpage says this is optional:
gid
The group's unique numerical id. The default value is the first free group under 100.
You may want to add a specific GID to see if it solves the issue:
group groupname=nagios gid=nnn (where nnn is an unused group ID)
-- Alan -
Install Nagios agents on Solaris 10 to monitor from RHEL 5
Hi,
Could anyone let me know the steps to be followed to install Nagios agents on Solaris 10 for monitoring from RHEL5. It is very urgent please help me.
Thanks
RaoHi Sugunakar,
There are a few small things I can think of checking:
I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
Regards,
[email protected] -
[SOL10] Installing nagios-plugins-1.4.13 make problems
Dear all,
I am trying to install nagios-plugins on my solaris 10 machine but i run into make errors:
Server
SunOS mxc-fs2 5.10 Generic_118855-15 i86pc i386 i86pc
Solaris 10 6/06 s10x_u2wos_09a X86
i first did a ./configure and did went well.
now when i do a make or gmake the following error occurs:
make all-recursive
Making all in gl
make all-am
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../intl -g -O2 -MT floorf.o -MD -MP -MF ".deps/floorf.Tpo" -c -o floorf.o floorf.c; \
then mv -f ".deps/floorf.Tpo" ".deps/floorf.Po"; else rm -f ".deps/floorf.Tpo"; exit 1; fi
In file included from ./math.h:22,
from floor.c:22,
from floorf.c:20:
/usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/include/math.h:26:26: iso/math_iso.h: No such file or directory
In file included from /usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/include/math.h:336,
from ./math.h:22,
from floor.c:22,
from floorf.c:20:
/usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/include/floatingpoint.h:30:24: sys/ieeefp.h: No such file or directory
In file included from /usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/include/math.h:336,
from ./math.h:22,
from floor.c:22,
from floorf.c:20:
/usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/include/floatingpoint.h:104: error: field `fpclass' has incomplete type
/usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/include/floatingpoint.h:128: error: field `rd' has incomplete type
*** Error code 1
make: Fatal error: Command failed for target `floorf.o'
Current working directory /usr/share/src/nagios-plugins-1.4.13/gl
*** Error code 1
make: Fatal error: Command failed for target `all'
Current working directory /usr/share/src/nagios-plugins-1.4.13/gl
*** Error code 1
The following command caused the error:
failcom='exit 1'; \
for f in x $MAKEFLAGS; do \
case $f in \
*=* | --[!k]*);; \
k) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo all-recursive | sed s/-recursive//`; \
list='gl lib plugins plugins-scripts plugins-root po'; for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
make: Fatal error: Command failed for target `all-recursive'
Current working directory /usr/share/src/nagios-plugins-1.4.13
*** Error code 1
make: Fatal error: Command failed for target `all'
does anyone had a clue what is going on?I've insaller SUNWlibm and the make is going further now but still ends in a fatal error:
then mv -f ".deps/pst3-pst3.Tpo" ".deps/pst3-pst3.Po"; else rm -f ".deps/pst3-pst3.Tpo"; exit 1; fi
pst3.c:1: sorry, unimplemented: 64-bit mode not compiled in
*** Error code 1
make: Fatal error: Command failed for target `pst3-pst3.o'
Current working directory /usr/share/src/nagios-plugins-1.4.13/plugins-root
*** Error code 1
The following command caused the error:
failcom='exit 1'; \
for f in x $MAKEFLAGS; do \
case $f in \
*=* | --[!k]*);; \
k) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo all-recursive | sed s/-recursive//`; \
list='gl lib plugins plugins-scripts plugins-root po'; for subdir in $list; do \
echo "Making $target in $subdir"; \
if test "$subdir" = "."; then \
dot_seen=yes; \
local_target="$target-am"; \
else \
local_target="$target"; \
fi; \
(cd $subdir && make $local_target) \
|| eval $failcom; \
done; \
if test "$dot_seen" = "no"; then \
make "$target-am" || exit 1; \
fi; test -z "$fail"
make: Fatal error: Command failed for target `all-recursive'
Current working directory /usr/share/src/nagios-plugins-1.4.13
*** Error code 1
make: Fatal error: Command failed for target `all'
another suggestion? the SUNWlibm was necessary so thank you for that. -
How to install Dual OS(solaris 10 and Windows XP)?
I have got a 80 gb sata hard disk and i am not able to install Dual OS(solaris and Windows XP ) on it.My Partitions are as follows:
Primary partition-5GB
Remaining are extended Partition.
Extended partition details
8 gb NTFS partition(installed windows XP)
7 gb NTFS partiton(No data in it)
20 gb NTFS partition(No data in it)
20 gb NTFS partiton(has data in it)
15 gb RAW partiton
I first installed Windows xp on 8 gb Extended partiton.Then when i installed Solaris i could see only 2 partitons.One with the 5 gb and the other with the 71 gb.I actually wanted to install my solaris on the 15 gb Raw partition.Since i could not see the partition(15 gb Raw) i installed solaris on the 5 gb partition.Now when the comp boots it goes to solairs os only.i dont have the option to choose windows at all.
could any one of you explain me how the partitions are supposed to be and how could i make it as a Dual OS.
Saravanan
Message was edited by:
SaravananMandalaWindows uses the primary partiton for boot, too, even if you installed it on the NTFS volume in the extended partition. Wherever you install Windows, it will need the primary partition for booting. You can never boot from Windows extended partitions
As for the 15Gb raw partition, it look like what you call 'RAW partition' is actually just a small little part inside the extended partition. All your NTFS partitions (and your RAW partiton) are logical volumes and they all reside inside the extended partition. Even though Windows sees them as separate drives, each with its own drive letter, just as it sees the primary partition.
You may try do use Windows fdisk or diskpart to delete the last logical volume in the extended partition, and then get the ntfs resize tool from Linux, or the CD1 from the Debian Linux install CDs, which has it included and accessible with a nice user interface, and resize your extended partition.
I don't know if it works, I only used it to also resize some logical volume inside the partition. ntfs resize tool might not be easy to work with, you will need to read its documentation, but it does resize NTFS partitions (I have seen it).
If it works, then you will have your 15Gb as unallocated space available for a new partition. Let the Solaris installer create this new partition automatically during install.
Timothy Madden,
Romania -
Cant install agent11g on Solaris 9
Hi
I do have problem installing agent on solaris 9 64 bit.
I tried tree ways - pushing agent from OMS, downloading agent using agentDownload and cloning agent from almost identical machine.
Installation script start failing on the linking step giving errors about not being able to link. All prerequisites for agent are met.
The third solution works until starting agent.
Agent doesn't start throwing an error:
emctl start agent
ld.so.1: /export/home/oracle/agent11g/perl/bin/perl: fatal: attempt to open file with null name
Killed
If I execute this being in AGENT_HOME directory but using emctl.pl:
bash-2.05$ perl ./bin/emctl.pl start agent
Can't locate lib.pm in @INC (@INC contains: ../lib/5.10.0/sun4-solaris-thread-multi-64 ../lib/5.10.0 ../lib/site_perl/5.10.0/sun4-solaris-thread-multi-64 ../lib/site_perl/5.10.0 ../lib/5.10.0 ../lib/5.10.0/sun4-solaris-thread-multi-64 ../lib/site_perl .) at ./bin/emctl.pl line 201.
BEGIN failed--compilation aborted at ./bin/emctl.pl line 201.
If I go to perl/bin directory and execute the same, adjusting paths:
bash-2.05$ cd perl/bin
bash-2.05$ perl ../../bin/emctl.pl start agent
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/sysman/emSDK/conf/TargetInstaller (Unsupported major.minor version 50.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:509)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:246)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:322)
EM Configuration issue. not found.
Can someone help me with this?
Thanks
EDIT: during linking I get this error:
INFO: ld: fatal: library -lclntsh: not found
Edited by: Jarek Jozwik on 10-Feb-2011 08:50
I do also get those errors:
INFO: /export/home/oracle/agent11g/bin/genoccish
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib/libocci11.a(occiSQLExceptionImpl.o): section .rela.text: invalid
relocation type: 0x52
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib32/libocci11.a(occiSQLExceptionImpl.o): section .rela.text: inval
id relocation type: 0x52
INFO: /export/home/oracle/agent11g/bin/genagtsh /export/home/oracle/agent11g/lib/libagtsh.so 1.0
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib/shoc.o: section .rela.text: invalid relocation type: 0x52
INFO: ld: fatal: relocation error: file /export/home/oracle/agent11g/lib32/shoc.o: section .rela.text%shocodat_os_date_to_julian: invalid
relocation type: 0x52
Edited by: Jarek Jozwik on 10-Feb-2011 08:59Hi Jarek,
I do not know to much about Solaris but this note (the truss command) cold give you a clue what is going on: 11g Grid Agent: Executing emctl Fails with 'Segmentation Fault' on Solaris 5.9 (Update 2) [ID 1140615.1]
Also: 11gR1 on Solaris failing at relink phase with errors like "ld: fatal: relocation error" and then "ld: fatal: library -lclntsh: not found" [ID 848700.1] could be of help regarding the link (lclntsh) error.
Eric -
Installing 11i on Solaris and migrating 8.0.5 to new 8.1.6 database
I've installed 11i (several times) on a new Sun solaris server. I also selected it to install a fresh database. On another server we have 11.0 and 8.0.5 database. We are using a new server to install 11i and we want to move our database over. I managed to transfer all database files over to the new server and upgrade to 8.1.6 (succeeded)
How do I proceed now to get the 11i applications to use the database i've transferred over. Is this possible??? Can't find any clear documentation on how to merge this database into the applications 11i.
Thanks
nullGina, I am attempting something similar... but it involves moving an exisiting installation from HP-UX to Solaris, so I cannot move the datafiles... If I run into a method that helps both of us, I will let you know... as of now, I am installing fresh on Solaris and going to try to run upgrade scripts on existing 10.7 and exp/imp into the new instance on 11i (Solaris).
Let me know of anything you find out that could help me, and I will do the same...
thanks
dns -
Need 11gr2 RAC install Guide on Solaris 10 x86 using containers and NFS
I'm looking for an 11gr2 RAC install Guide on Solaris 10 x86 using 2-3 containers. I need to have the NFS server reside in the global zone or on a 3rd container visable to the two rac containers.
Please share me installation guide!
Thank you!
PS - I currently have run into an install issue -
Can't change ownership on /oracle/products/11.2.0/ocr/: not owner at /oracle/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 5014.
I suspect the NFS share params from the NFS server in the global zone are not 100% correct to the two rac zones/containers.Have you visited Oracle Support Services website (formerly metalink) to determine if your desired configuration is supported?
Last time I looked it was not.
That said Oracle database installation guides are fully documented online.
http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html -
Oracle 9i install failing on Solaris 10
Oracle 9i install on Solaris 10 fails at the Database creation stage with Ora error "Out of Memory"
I have a Ultra 10 with 1GB RAM, 2GB swap and lot of space in the filesystem where I am installing Oracle
The oracle release notes asks for increased value for shmmax, shmmni etc by editing /etc/system and according to Solaris 10, it is not required as kernel dynamically allocates those values. It looks like it is NOT. How can I verify?
rcladm talks about shmmax values only with projects. How can I verify that all my applications running on a this box has a higher SHMMAX values and not on per project basis.
In older versions, sysdef could tell us the current SHMMAX values. Is there any comparable commands in Solaris 10.
I am not that comfortable with the rcladm features. Can some one show some examples.
Is anyone successful in installing Oracle9i on Solaris 10. I heard Oracle patch set 9.2.0.5 and 9.2.0.6 is certified with Solaris 10. Does it mean the original version of 9.2 does not install on Solaris 10?'Net Configuration Assistant is failing" from installation. I tried twice and got the same problem. I tried to run 'netca' from the command line and got the same problem - Java runtime problem. I tried to install patch and could not find Oracle patches for Solaris 10 and the patches are for Solaris 9.
Does anyone have suggestion?
$ ./netca
ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
ld.so.1: /usr/ora/920/oracle.swd.jre/bin/sparc/native_threads/jre: fatal: relocation error: file /usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/usr/ora/920/oracle.swd.jre/bin/../lib/sparc/native_threads/libawt.so)
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Compiled Code)
at oracle.net.ca.NetCA.<init>(Compiled Code)
at oracle.net.ca.NetCA.main(Compiled Code) -
Can EM12c Cloud Control agent be installed in a solaris zone?
Can EM12c Cloud Control agent be installed in a solaris zone?
If so, are Solaris 8 and Solaris 9 zones supported?
thanksYes we can...
Solaris 9 is supported...I have installed agents on solaris 9 and 10 -
Install oracle10g at solaris 10 x86 platform ORA-07445 error occured
I meet a problem when install oracle10g at solaris 10.when create database, the dbca display infomation:
ora-03113 "end-of-file on communication channel"
ora-03114 ORACLE not available
Perhaps someone can give me some advices ?
Its very urgent
Thanks and Best Regards
Dillon.xu
OS: solaris10g
# showrev
Hostname: v40-1
Hostid: 24ea10ed
Release: 5.10
Kernel architecture: i86pc
Application architecture: i386
Hardware provider:
Domain: test.com
Kernel version: SunOS 5.10 s10_74
v40-1# prtconf |grep Mem
Memory size: 2048 Megabytes
database: oracle10g 10.1.0.3
Oracle trace file info:
export/home/oracle/product/10.0/rdbms/log/ora10g_ora_1759.trc
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /export/home/oracle/product/10.0
System name: SunOS
Node name: v40-1
Release: 5.10
Version: s10_74
Machine: i86pc
Instance name: ora10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
1759
kstwlb: SGA is no longer mapped
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
59fffff4
*** 2005-02-22 14:20:07.861
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to obj
ect] [1509949428] [] [] []
Current SQL information unavailable - no session.
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)10g on Solaris 10 isn't yet supported. It is announced for March 2005.
-
Docs needed for installing siebel in solaris 10 x86
Thanks
Kishore
Edited by: Kishore P on Aug 11, 2010 6:03 PMIf it's documentation you're after, always go straight to Siebel Bookshelf!
http://download.oracle.com/docs/cd/E14004_01/books/SiebInstUNIX/SiebInstUNIXTOC.html -
HOW TO INSTALL ROUTING IN SOLARIS 10
I have already installed my Solaris 10 Server, I was tryin to implement the routing in the file /etc/init.d/inetsvc (/etc/rc2.d/S98inetsvc) as in Solaris 8.
!! this file does not exists!!
How install routings in Solaris 10 6/06 ??
thanksI have already installed my Solaris 10 Server, I was
tryin to implement the routing in the file
/etc/init.d/inetsvc (/etc/rc2.d/S98inetsvc) as in
Solaris 8.
!! this file does not exists!!
How install routings in Solaris 10 6/06 ??It depends on what your routing script does. Solaris 10 introduces persistent routing, so you may just need to add the route once (persistently), then let the system take care of it.
Darren -
hi,
i have a problem when trying to install gcc on solaris 10.
my path:
PATH=/usr/sbin:/usr/bin:/usr/sfw/bin:/usr/sfw/lib:/usr/sfw/libexec
# gcc test.c
gcc: installation problem, cannot exec `as': No such file or directory
i don't know what the problem is, please help
thksi have a problem when trying to install gcc on solaris 10.Solaris 10's bundled gcc in /usr/sfw/bin/gcc?
my path:
PATH=/usr/sbin:/usr/bin:/usr/sfw/bin:/usr/sfw/lib:/usr/sfw/libexec/usr/sfw/lib and /usr/sfw/libexec can probably be deleted from
$PATH, the executables are in /usr/sfw/bin.
# gcc test.c
gcc: installation problem, cannot exec `as': No such
file or directory/usr/sfw/bin/gcc needs the GNU assembler, and it should be
install as /usr/sfw/bin/gas. Do you have the Solaris 10 package
SUNWbinutils installed?
% pkgchk -l -p /usr/sfw/bin/gas
Pathname: /usr/sfw/bin/gas
Type: regular file
Expected mode: 0555
Expected owner: root
Expected group: bin
Expected file size (bytes): 613844
Expected sum(1) of contents: 49903
Expected last modification: Jan 23 02:53:41 2005
Referenced by the following packages:
SUNWbinutils
Current status: installed -
Hi,
I am trying to install DBI on solaris 10 (SPARC - 64 bit).
I got an error message after using command make
sh: cc: not found
Error code 1
make: Fatal error: Command failed for target 'Perl.o'
Does someone know how to solve the problem?
ThanksTry this guy's list, he maintain an archive of Solaris package.
http://www.ibiblio.org/pub/packages/solaris/sparc/html/creating.solaris.packages.html
Of course, if you can get directly from Sun will be better.
Maybe you are looking for
-
Other programs work fine while Firefox is open, but when I go back to the Firefox window, the problem starts again. I click on the "fiel edit view" buttons, but nothing at all happens. It's been like this for a few days.
-
NativeObject is not shown in ADSIedit
Why nativeObject propperty is not shown in ADSIedit? It is because I am able to query out the nativeObject property but the result show no value. From some research, can I conclude that NativeObject property is a method? That why it can be seem in po
-
IPhoto can't handle old photos repaired in Adobe Photoshop
I'm losing respecty for iPhoto. On March 15th I had a question about publishing photos to my IPhoto 5 web site using iPhoto 8. For those who are interested I have learned from Apple that it can't be done because iPhoto 5 and iPhoto 8 are incompatible
-
Deflater setLevel + setStrategy doesn't work
Hi, I cannot seem to get Deflater.setLevel and .setStrategy to work (working on JDK1.5). If I pass a compression level in the constructor of Deflater, it works, but calling .setLevel will give me 0 bytes in compression. public void test_deflater_
-
Images still there after cutting (razor tool)
I've used the razor tool to cut out some frames from a single video track. This creates two tracks, which I've pushed together. I then applied the video transition affect cross dissolve. I noticed that only in the dissolve, the cut frames were ble