Install Oracle 10g R2 RAC on Linux 5.x (64 bit)

Hi Friends,
Please provide the document to Install Oracle 10g R2 RAC on Linux 5.x (64 bit)
Cluster : Local Disk
OCR and Voting Disk : OCFS2
DB Home : Local
DBF Files and FRA : ASM
Please let me know how to create OCFS2 and ASM Volumes for RAW Disks (SAN Lun's)
Regards,
DB

You can refer below
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html
http://www.oracledba.org/10gR2/Pre_Install_10gR2.html
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=9&ved=0CHUQFjAI&url=http%3A%2F%2Fcommunities.vmware.com%2Fservlet%2FJiveServlet%2FdownloadBody%2F12534-102-1-13254%2F10gR2%2520RAC%2520INSTALLATION%2520IN%2520LUNX5.pdf&ei=71A5T-jrM8jMiQLihOS_Cg&usg=AFQjCNGnBrzhvm3j9PuPNy4FLJuaxetS1A&sig2=0b8VnMefcXueFUu44-66yQ
Hope this helps,
Regards
http://www.oracleracexpert.com

Similar Messages

Issues while installing ORACLE 10g R2 RAC on RHEL 5.3

i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM.
i went through the pre-requisites ok before beginning with the installation.
since RHEL 5.3 doesnt support raw devices i used
http://www.idevelopment.info/data/Unix/Linux/LINUX_ConnectingToAniSCSITargetWithOpen-iSCSIInitiatorUsingLinux.shtml#Configure%20iSCSI%20Initiator%20and%20New%20Volume
udev to configure shared storage. my storage is on openfiler as a iSCSI target.
fdisk -l on both nodes shows the shared drives.
[root@node1 ~]# fdisk -l
Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          13      104391   83 Linux
/dev/sda2              14        2053    16386300   8e Linux LVM
/dev/sda3            2054        2372     2562367+ 82 Linux swap / Solaris
Disk /dev/sdd: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdd1               1       10016    10256368   83 Linux
Disk /dev/sdb: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1       10048    10289136   83 Linux
Disk /dev/sdc: 10.5 GB, 10536091648 bytes
64 heads, 32 sectors/track, 10048 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdc1               1       10048    10289136   83 Linux
Disk /dev/sdf: 10.5 GB, 10569646080 bytes
64 heads, 32 sectors/track, 10080 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdf1               1       10080    10321904   83 Linux
Disk /dev/sde: 10.5 GB, 10502537216 bytes
64 heads, 32 sectors/track, 10016 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sde1               1       10016    10256368   83 Linux
[root@node1 ~]# ls -l /dev/iscsi/arpl*
/dev/iscsi/arpl1:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sde
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sde1
/dev/iscsi/arpl2:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdd
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdd1
/dev/iscsi/arpl3:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdb
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdb1
/dev/iscsi/arpl4:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdc
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdc1
/dev/iscsi/arpl5:
total 0
lrwxrwxrwx 1 oracle oinstall 9 Jun 30 12:58 part -> ../../sdf
lrwxrwxrwx 1 oracle oinstall 10 Jun 30 12:58 part1 -> ../../sdf1
[root@node1 ~]# configuring udev results in the drives being mapped to persistent drive names eg. /dev/iscsi/arpl1/part1
still when i enter the name of the raw device which i have created i get the following error. please help
Image: !http://img91.imageshack.us/img91/7448/oracle.png!

did you check this
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b14203/storage.htm#BABBHECD
http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/storage.htm#CDEBFDEH
also before you do what is suggested on the url posted by Mufalani,
it seems that you should do the following:
Check existence of udev raw mapping rule file /etc/udev/rules.d/60-raw.rules
On RH/EL5, udev raw mapping rule file /etc/udev/rules.d/60-raw.rules should exist by default as part of the util-linux package, for example:
# ls /etc/udev/rules.d/60-raw.rules
/etc/udev/rules.d/60-raw.rulesCreate a custom udev raw mapping rule file, /etc/udev/rules.d/61-oracleraw.rules say, for example:
# touch /etc/udev/rules.d/61-oracleraw.rules3b. Add udev raw binding rules to /etc/udev/rules.d/61-oracleraw.rules file
Add the udev raw binding rules to the /etc/udev/rules.d/61-oracleraw.rules file, for example:
# cat /etc/udev/rules.d/61-oracleraw.rules
# Raw bind to Oracle Clusterware devices
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524174", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sd*", PROGRAM=="/sbin/scsi_id", RESULT=="360a98000686f6959684a453333524179", RUN+="/bin/raw /dev/raw/raw2 %N"If migrating to RHEL5/OEL5 from an earlier Linux version that relied on /etc/sysconfig/rawdevices file for persistent raw device bindings, the following script can be used as a basis for generating your RHEL5/OEL5 udev rules. Note, the script does not factor device name persistency.
#!/bin/bash
grep -v "^ *#" /etc/sysconfig/rawdevices | grep -v "^$" | while read dev major minor ; do
if [ -z "$minor" ]; then
echo "ACTION==\"add\", KERNEL==\"${major##/dev/}\", RUN+=\"/bin/raw $dev %N\""
else
echo "ACTION==\"add\", ENV{MAJOR}==\"$major\", ENV{MINOR}==\"$minor\", RUN+=\"/bin/raw $dev %M %m\""
fi
done

Installing oracle 10g xe edition on linux

Hi,
I am trying to install oracle 10g xe edition on redhat linux. By default the oracle database rpm package uses /usr/lib partition for installation files. Is it possible to install the oracle database files in /export partition instead of default location /usr/lib?
Thanks
Kapil

There are a few differrent 'RedHat Linuxes' ... could you be a bit more specific.
But ... the default answer is 'no'. Several of us have used various workarounds, including creating a special link from /usr/lib/oracle to /export/oracle and the like.
I installed in /usr/lib and after successful installation I created a special link, copied everything to the new target, and have had no problems at all.
Others have used other techniques with success. INcluding the one by cd - tweak the install script.

Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3

I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
# sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
The error I had got is as follows:
Preparing.....#####################[100%]
1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum Mismatch

The steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
The Previous Query is as follows:
Thanks For Guiding Me All of you!
Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
Now, I am having the following problems:
After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
" The connection was refused when attempting to contact 127.0.0.1:8080 "
2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
ORA-01034 : Oracle not available
ORA-27101: Shared Memory realm does not exist
Linux Error:2:No such file or directory
3. When I try to manually start the Listener or Services, It gives one more error:
Root Not a Member of DBA Group
I need to What is happening or What is the Problem and How will I rectify them?

Is it possible to install Oracle 10g database on a linux Os ?

Hello all,
I recently installed Fedora 14, and oracle 10g free edition, on my modest laptop.
Problem is , I can't upload any scripts, because as i recently learnt from my school teacher, Oracle only works smoothly with Internet explorer browser (i.e.).
I tried using programs like winetricks to download a linux version of i.e. but in this case Oracle doesn't even open its homepage.
-In a nutshell, does anyone know a possible way to work with oracle 10g , (or any alternative), that's fully functional on linux (fedora 14) ? Download, Install steps,etc.
All i need to do is upload simple SQL scripts, and practice my " select from...." commands.
-Is oracle linux a option ? and what is it?
Thank you already for any replies, I'm really getting tired of googling threw different forums.

865504 wrote:
Ed,
-i knew my teacher was being stubborn;
-I meant that the winetricks version of i.e., didn't open the homepage of oracle 10g (=log in screen).
-what i was trying to do was, after having installed oracle 10g , "go to data base homepage" (openend by firefox) , once logged in with my username, upload a script , and practice typing the different (select from ...group by..etc) sql commands.
Here is one of several concepts you need to fix in your mind. Databases don't have home pages. Client applications do. Databases store and manage data. Humans at the keyboard see the client application, not the database. Oracle provides some client apps ( iSQLPlus, Oracle Enterprise Manager (Grid Control), dbcontrol, APEX) and even installs some with the database by default, but they are distinctly separate from the database, and so must be identified when talking about user interface issues. Unfortunately, telling us you tried to open "the home page of oracle" tells us nothing at all. If you had said "Tried to log in with iSQLPlus" or "I tried to connect with Apex", it would have conveyed MUCH more information. We would have then had some frame of reference as to what you were seeing.
To the "upload from where" question : I simply copied the scripts ( .sql , file) from the pc's from school, on usb, then copied them on my own system. When using the "upload scripts" option from oracle, Again, you must distinguish between "oracle" (the database) and whatever client tool you use to connect to it. "Oracle" (the database) doesn't have an "upload scripts" option. Some un-named application does.
the script is uploaded, but when i try to "run" it , nothing , blank page. no tables, nada. And given what I've said above, you can guess what this statement means. - grin -
My first guess was, well the teacher said " i.e. only " , so i tried installing i.e. , using winetricks, but i had a feeling i was going off-track, and that surely there must have been a much easier way.
Even Billy was more charitable toward your teacher than I feel. And when he is so wrong about something as simple as this, makes me wonder what else he is wrong about. And the quality of the teachers calls into question the quality of the school in general.
In fact, had I been told that by an instructor, I would make it a personal mission to prove him wrong. Not in front of the class (as much short term satisfaction as that may provide) but just by taking my laptop to his office and saying "let me show you something". One of my personal hot buttons is for someone who should know better to pronounce something as "won't work" when I've been doing it for so long and so easily as to just take it for granted.
>
Linux (fedora 14) is up and running,
oracle 10g , linux version, was installed using detailed guide.
And yes, i will look into oracle linux, and oracle 11g ,
but i was hoping to use the same version as my school, to avoid any surprises when passing my exams.Edited by: EdStevens on Jun 13, 2011 3:02 PM

Install Oracle 10g on Linux

Hi Friends,
Im installing oracle 10g Db on RedHat Linux, and one of the required package
glibc-2.3.4-2.9 was not found/installed at O.S. installation time. The recommendation was to download it from the Linux website, which I did.
I got the file glibc-2.3.4-2.9.src.rpm but I dont know how to install it :)
Can u tell me the command to install please...
Thanks a lot

thanks a lot dear :)
I got warning: group brewbuilder does not exist - using root...
And some packge got error : V3 DSA signature: NOKEY, key ID db42a60e
Is it just ok?
Message was edited by:
[email protected]

Not able to install Oracle 10g Express on linux 64bit based on Dude's intr

I followed "https://forums.oracle.com/forums/thread.jspa?threadID=2200434" to install oracle 10g xe on Ubuntu 10.10 AMD 64-bit
but I ran into below error while I was trying to install 10g XE on linux 64bit
root@vdevluxcnhz0021:~# dpkg -i force-architecture libaio_0.3.104-1_i386.deb --------- this step is error
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
dpkg: regarding libaio_0.3.104-1_i386.deb containing libaio:
libaio1 conflicts with libaio
libaio (version 0.3.104-1) is to be installed.
dpkg: error processing libaio_0.3.104-1_i386.deb (--install):
conflicting packages - not installing libaio
Errors were encountered while processing:
libaio_0.3.104-1_i386.deb
Linux version
root@vdevluxcnhz0021:~# cat /etc/issue
Ubuntu 10.04.2 LTS \n \l
root@vdevluxcnhz0021:~# cat /proc/version
Linux version 2.6.32-28-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 23:57:16 UTC 2011
Can you please help on this?
Thanks
Edited by: user1997872 on Jan 4, 2012 7:07 AM

It looks like you will have to uninstall "libaio1", but I don't know for sure and don't have Ubuntu 10.4 available right now to play with.
Sorry but the instructions are for Ubuntu 10.10, not 10.4, which is different.
If you need to install XE on Ubuntu, I'd rather suggest 11gR2 XE:
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 how-to
Oracle 11gR2 Express Edition on Linux Ubuntu 11.10 howto

Error Installing Oracle 10g on Windows Vista

I have just bought new Laptop with Intel Core Solo Processor U1500 (1.33 Ghz) and 1Gb Ram, and Windows Vista Business Edition.
When I ran Oracle 10g Enterprise Edition Setup on my laptop, setup asked for Administrative Password and then Unknown Error Occured, any idea what could be the problem ?
Regards,
Luqman

You didn't mention if you have Vista Home Premium or Vista Home Basic. Whether Vista is 32-bit or 64-bit version. Nor did you mention which version of oracle software you downloaded and used to install.
I have installed Oracle 10g Enterprise on Windows Vista Home Premium 32-bit. It does work. However, I downloaded and used the version of Vista 32-bit.
So, did you use the version of Windows Vista 32-bit or not?
What is the error message?
People can not help you unless you tell use the error message.

Anybody installed Oracle 10g application server on windows 2008 (64 bit) se

Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.
which version of OAS we should use?l. we are using dell server .
regds
santosh
Edited by: user5429538 on Feb 24, 2010 2:59 AM

Hi Santosh,
Has anybody installed Oracle 10g application server on OS : windows 2008 (64 bit) server.I dont think any version of Oracle Application Server is certified for windows 2008 yes.
But, u can Install Oracle Application Server 10g Release 2 (10.1.2.0.2) on windows 2003 (64 bit) server
Please refer below links for download and to check certification:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html
Hope helps
Regards,
X A H E E R

Oracle 10g Developer suit in windows 7 Homebasic 64 bit

Dear All,
Can I install oracle 10g Developer suit in windows 7 Homebasic 64 bit.if possible.how to do.
please help me.
Thanks and Regards,
Fazil

Hello,
Please note that Developer Suite 10R2 is NOT certified(cannot be installed) for Windows 7 64-bit.
For an official statement check this note:
Forms / Reports Builder Certification on MS Windows 7 (Doc ID 1112213.1)
Developer suite 10gR2 is certified only on Windows 7 32-bit:
1292919.1 - Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)
You can install Developer suite 10R2 on Windows 64-bit in xp mode.
11gR2(11.1.2 version) is certified and can be installed on Windows 7 64-bit
Also IE9 is not certified with 10gR2.Check:
http://www.oracle.com/technetwork/developer-tools/forms/clientsod-forms10gr2-097528.html
Regards,
Alex
If someone's answer is helpful or correct please mark it accordingly.

Oracle 10g Client not working in Windows 7 64 bit

Dear All,
Not ablle to install Oracle 10g Client (Rel 2) in Windows 7 64 bit , getting an abnormal error and stoping ..
Please suggest me how to proceed futher

823755 wrote:
Dear All,
Not ablle to install Oracle 10g Client (Rel 2) in Windows 7 64 bit , getting an abnormal error and stoping ..
Please suggest me how to proceed futherWhich Edition of Windows 7?
Where version of Oracle to four decimal places; i.e. V10.2.0.1

Installing Oracle 10g rac on linux 4 using vmware :problem

Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaan

hi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

How to install Oracle 10g with its grid functionality on Linux?

Well, I thought changing the subject line might help to convey the meaning of what I want better. Here's my earlier post from a few hours earlier.
Hi,
I need carry out TPC-C benchmarking test for Oracle 10g (using one, two and four servers; basically using the grid in case of multiple servers). I have installed oracle 10g (with default options) on all the four servers, but beyond that I have no idea as to how can I invoke the grid option in order to carry out the tests-by my statement, I mean do I need to choose grid option while installing Oracle or is it the case that I specify the grid option in the code that I write for carrying out the tests. The OS is LInux (Scientific Linux).
An unrelated problem-one of the servers is 64 bit while others are 32 bit, and proper versions of oracle have been installed. Neglecting the obvious fact that this will make comparisons difficult does anyone anticipate any other problem?
Many Thanks!
Steve
*******************************************************************************************************

Do you think that the installation of RAC can be done
in a week? yes, as long as you know what you are doing and can catch the concept quickly and good at following instructions.
Moreover, we do not have a cluster-all we
have are four servers that are separate. Do you know
if the name Real Application Clusters implies that
the servers have to be in a cluster?
The basic idea of RAC is all these hosts need to share same set of storage. The most popular such storage are SAN and NAS.
An example of building RAC on linux
http://www.oracle.com/technology/pub/articles/hunter_rac10gr2_iscsi.html

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Install Oracle 10g R2 RAC on Linux 5.x (64 bit)

Similar Messages

Maybe you are looking for