Install port error.

Howdy all. I just installed 10g and during the install got an error about not being able to use the assigned port because it was set to NULL. It also said I would be able to go back and fix in Enterprise Manager after the install was complete. But then at the end of the install there is no link displayed for EM the way there is for iSQLPlus. Can someone pelase assist?
TIA, ChrisR

Hi,
http://dbataj.blogspot.com/2007/01/oc4j-configuration-issue.html
go through above link and create if not configure OEM for your database or CONFIGURE your database for OEM.
regards
Taj

Similar Messages

AS Java 7.01 Install - Port Error

Experts, I'm in the process of installing NetweaverAS Java (only no ABAP) 7.01 instance on Lunix Redhat 5. I am getting the following error after starting sapinst:
Logon Error:
Connection to SAPisnt could not be established, see following message
Could not connect to host localhost on port 21200
java.net.ConnectException: Connection timed out
java.net.ConnectException: Connection timed out
I have confirmed with the unix/server group that the ports are not in use
This obviously looks like an issue with the port, but I've been assured that the port is open/available. Does anyone have any insight?

Hello Michael,
Check for the all variable before s tarting the sapgui like java_home, LD_LIBRARY and DISPLAY try again.
Also try to use below commands
./startInstGui.sh -server -host <Linux Server IP Address> -p 21200
or
./startinstgui.sh -host <your_linuxserver_host_name>
or
./sapinst GUISERVER_DIALOG_PORT=21215
and let us know if you are still facing issues.
Thanks and Regards,
Ram

Voiceover kit will not install 1603 error win8

Voiceoverkit will not install. Error code 1603. Running Win8. iTunes 11.0.5.5

Hello tzachman,
Thank you for using Apple Support Communities!
It sounds like you are getting an error message when trying to get the Voiceover kit to install.
I found an article that seems to address this error code specifically named iTunes: Specific update-and-restore error messages and advanced troubleshooting found here http://support.apple.com/kb/TS3694#error1603
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts
Here is the troubleshooting from the 1604 section that it references:
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Take care,
Sterling

Unable to print to network printer // sometimes with port error

I upgraded to Leopard and am now _*unable to print to my network attached*_ *_Lexmark x9350_*. In prefs it shows the printer and driver installed. Once a print job is submitted, it reads printing, but there is no action on the printer. Other times it gives a port error. I tested the printer under OSX 4 and it printed with no problem. I also have a similar problem on the XP partition of this system. Please advise.

I don't think Lexmark has a Leopard driver for this printer yet. This problem was discussed earlier here
http://discussions.apple.com/thread.jspa?messageID=5702119&#5702119

Portal 7.2 Install - Port:: Unable to verify port.

I have been attempting to install Portal Server 7.2 on Solaris 10(5/08). I have sucessfully installed Access Manager and Directory server from JES U1. However when i tried to install the Portal Server, I got "Unable to verify port" error. I provided the default port of Sun Java Application Server 9.1, 8080. Could anyone please suggest a way out of this impasse please, I will be much obliged.

Can you look in the installer log file (it should be created in /tmp/install*.log or in /var/tmp).
It should tell you why the SIMS Backend was unable to initialize. Some things to check:
- Your system should have the rpm tool installed at /bin/rpm
- Do you have have any old, corrupt RPM DB entries? You can clean them up with
rpm -e `rpm -qa|grep sims-product`

Install cache error

I'm trying to install itunes 10.6 on windows 7 home premium. it downloads the software and starts to install. I receive an error: "an error occurred while attempting to create the directory c:/program data/apple/installer cache" I click retry several times and no luck so I have to click cancel and it rollsback the installation. I have downloaded a new copy of the installer from another computer and receive the same error. I dropped the UAC on the system to none. That did not work, it give me the same error. I have tried renaming the Installer Cache to a temp name and when installing again, I the error says it doesn't have the permissions to create the directory. I have gone into the control panel and attempted to repair bonjour, itunes, apple mobile device support, apple software update and quicktime and all of them have reported "The system cannot find the file specified." I have tried running the install package with the right click Run as Administrator and the install cache error still occurs. I have check the security on the file and it has my user name and full control on the parent and all items below.
When I plug in my iphone or ipod, it asks about updating to 5.1, I click download only. I then receive an error window "There was a problem downloading the software for the iphone or ipod. The network connection could not be established"
I don't know if the two problems are related. I'm at a stand still have have no other ideas of what to try next. What suggestions might you have to solve this problem?
Thanks for the help!
Joel

I tried to rename the apple computer folder to _old and I received another error with another really funky folder name that looked like a SID. I renamed that and reran.
Crikey. Probably that number (in the folder name) was the SQUID ("squished GUID") for the iTunes installation (or possibly one of the other associated components being installed). In addition to the error 5, that brings us to a total of three of the more exotic things that could possibly happen in this sort of file-access-problem context.
So, excellent work on your part getting past all that. Many thanks for reporting back with your resolution, too.

Itunes install issues error 7 - Windows error 193

Gents,
I am using Windows 7, had iTunes for years no issues I couldn't solve myself, this time I need help.
When the last update of iTunes came on, I tried to update my version but couldn't do the update (I don't remember the error message details, it just said that I had to re-install iTunes).
So I cleared ITunes and all Apple related softwares from my computer (yes in the recommended order, and yes I rebooted in between) tried to re-installed (numerous times) and I always get the same error messageS:
"Couldn't install ITunes Error 7 (Windows error 193)" and also "ITunes helper was not installed correctly"
When running the installer I get the error message "Apple Mobile device failed to start", even if I ignore this message during the install, I am unable to open iTunes once the install is done. (the install goes through and says install finished).
Note: I also tried to "fix" during the install, it didn't work.
Context / Trials / Notes:
- I tried to "repair" the Apple Mobile Device in programs (unsuccessfully)
- I had 2 Apple Mobile Device services, so after a complete un-install and reboot, I manually (command prompt) remove the last service
- In all my un-install attempts I went on the C: drive and made sure ALL folders were cleared of apple / iTunes traces. Delete ITunes setup file, empty the recycle bin of course, reboot etc)
- Windows is up-to-date - No viruses (using Malwarebyte/ AVG & Spybot).
I am at a loss, spent a lot of hours on the computer and on forums, but couldn't find the fix.
I would greatly appreciate your help, this is getting on my nerves and I really need to change the music on my iphone ! (lol)
thank you in advance

If the above hasn't helped then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
Disabling your AV during installation may sometimes help.
tt2

Cannot install itunes. get error message program RSVCR80 not installed. windows error 126.

cannot update or install itunes. ger error message RSVCR80 not installed. windows error 126.

Hey sndlot,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so arearticularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Regards,
Delgadoh

Install certificate error

I have been trying for at least a month to install the new iTunes. Every time it gets in the middle of the install it errors out saying there is an invalid certificate.

I found it. For Firefox it is under Tools / Options / Advanced / View Certificates
That will only give you a list of Names and Devices. Highlight the one you think it might be then click on view to see the expiration dates.
Right now I am on a different computer. I will try it later on my iTunes computer.

Install Script Error?

It's Christmas day, and I just got an IPOD Video and tried to install the software for it and ran into a whole mess of problems.
I tried to install ITunes 7 & Quicktime 7, but every time I try I get an error at the end of the installation saying something about a missing Install Script error and that i need to run "ISScript.msi" or contact support.
I have no idea what to do, and tried to find that file on microsoft.com, but the onlyint that comes up is "Virtual PC 2004" and not how to install it, but work around it.
any suggestions?

The Install script engine on this machine is older than the version required to run this setup. If available, please install the lastest version of ISScript.msi or contact your support personnel for further assistance.
okay, let's try installing a version 11, using the instructions from the following InstallShield document:
Update to the Latest InstallShield Installation Engines
is that one of any help with the error message?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks. You might want to do a search on that topic and see if anyone has a solution. There have been various versions of the problem but a lot related to errors in the download package or failure to download.

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.

Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.

You problem is in the Fault Module MSVCR80.dll
Do a web search for this. Here is one LINK

Hi itunes wont install windows error 2 keep popping up what do i do?

hi itunes wont install windows error 2 keep popping up what do i do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

HT1349 Not a Mac computer-have had ITunes on this computer for literally years. This morning i am getting an error message trying to open Itunes - MSVCR80.dll not found, Not installed correctly Error 7 (Windows error 126). DL would not work. Help!

Have had Itunes on this computer literally for years. This AM message "MSVCR80.dll not found, not installed correctly Error 7 (Windows error 126) "- and could not download (it wanted a mobile device - I don't have one)
Help!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

ITunes was not installed correctly Error 7 (Windows error 998)

HI
I had a Trojan and used Malwarebytes to get rid of it and now everything is fine but for some reason everytime I try to open Itunes I get the message ITunes was not installed correctly Error 7 (Windows error 998)
I have done various searches on this issue and have so far done the following :-
Complete uninstall of Itunes, Quick Time and all associated programs and then a fresh install. I have also updated Microsoft.net framework. I have run a microsoft IE8 repair tool and have also made another windows user account to see if it was just my own user account.
None of this has helped and I am still getting the error. Do I really have to do a complete format on my PC or is there anyone out there that can help?

I've found something that may or may not be relevant.
Whenever I run CCleaner after installing iTunes I get the following registry errors:
Missing TypeLib Reference IUserHelper - {19D52A9A-379C-4720-BA00-3D396ECD24D7} HKCR\Interface\{915DA835-02FE-4953-92FA-624BDF5D85AB}
Missing TypeLib Reference IiPodManagerUI - {19D52A9A-379C-4720-BA00-3D396ECD24D7} HKCR\Interface\{D775A119-EAC2-4F28-B06E-8AC16F2695DA}
These always come back when I try and 'Repair' iTunes from the control panel.
Ideas anyone?

Install port error.

Similar Messages

Maybe you are looking for