Install problem on Windows 7 64-bit

Hello all,
I am attempting to install Adobe Reader on a new installation of Windows 7 64-bit. When I run the setup file (AdbeRdr920_en_US.exe) the installer starts, but the progress bar never gets beyond 10.93%. It just hangs there. The text above the progress bar says "Processing Adobe Reader 9.2". I've tried downloading the installer again, and running the installer as Administrator, to no avail. Does anyone have any insight into this issue? Thanks in advance.

I seem to have solved the issue by downloading this install file
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.2/enu/AdbeRdr920_en_US.exe
which installs successfully.

Similar Messages

HT201468 Can I install on MacBook Windows 32-bit version

Can I install on MacBook Windows 32-bit version? I went through the installation and when I try to run the update on Windows (due to no internet access) I receive a comment that the Windows and Boot Camp Windows update don't agree? I downloaded Windows update through Boot Camp process?

From the same link posted earlier,
Mac model
Windows 8 64-bit
Windows 7 64-bit
Windows 7 32-bit
Windows Vista 64-bit
Windows Vista 32-bit
Windows XP 32-bit
MacBook Pro
(15-inch, Late 2011)
5
5
4
You can install W7 32-bit, but you will need to use Boot Camp Support Software 4.0.4033 drivers. You will need to run Bootcamp Assistant 4 from an older version of OSX. You can install OS X: Installing OS X on an external volume - Apple Support which has BCA 4.x and then install W7 32-bit.

Problems Installing JDK 7u2 Windows 64-bit

I've downloaded the Development Kit but for some reason it won't install. I try clicking on it and nothing...
Help please.

The problem of installation of JDK 7u2 on Windows x64 is coming for both 32 bit and 64 bit versions of JDK.... However, i have tried installing them on Windows x86 (specifically Win XP SP3 x86 on VirtualBox 4.1.8) and the 32 bit version of JDK seems to be installing just fine on 32 bit Windows.
I might be wrong here but maybe the problem is that the 32 bit code on the JDK 7u2 may contain some 16bit code and so the Windows x64 is not able to run it (x64 OS not backwards compatible with 16 bit code). However the chances of this is slim since this is an update and the JDK 7u1 both 32 and 64 bit versions were fine.
However if this might have happened, then it is also possible that the 16bit code is also present in the 64 bit version of JDK 7u2 and thats why both the versions are not running on Windows x64.
Hoping they fix the issue soon. I need to do some testing and programming on Java 7.

Can't install itunes on windows 64 bit system

I tried to install itunes on my 64 bit machine, but with verson 6.0.5, it says this software doesnt support 64 bit systems. I tried to install an earlier version i think its 6.0.4.2 not sure, but it does install on my computer. When I try to open the program and quicktime, I get error box saying the program had a problem and couldn't open. Is there anyway to fix this problem, and is there a way to have the newest version of itunes to work on windows 64 bit?
Windows XP Pro

iTunes and QuickTime have never been supported on the 64-bit version of Windows (look here for the official statement). Some people have managed to get it working (at least tolerably), but from what I've read, a recent update from Microsoft has caused a lot of problems. You might try rolling back recent Windows updates and see if you can get things working again.

Error numbers are 2502 and 2503 for installing iTunes for Windows 64 bits. How to fix?

Hey guys,
I cannot install iTunes (latest vision) on my new laptop (Windows 64 bits), and it says that the error numbers are 2502 and 2503...
Can someone tell me how to fix this?
Thank you!

Check your system date & time is correct.
Run the System File Checker: http://support.microsoft.com/kb/929833
If you still have problems try a creating a new user account with administrator rights, log into it, and attempt the install from there.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

OBIEE install problem on Windows 2008 R2 64bit server

Hi!
I have for 1 month struggled with a OBIEE 11g install on a Windows 2008 R2 64 bit server. (I have a open SR at Oracle but have not got any answer/suggestion for 2 weeks)
I follow these documentations:
Oracle® Fusion Middleware
Installation Guide for Oracle Business Intelligence
11g Release 1 (11.1.1)
E10539-01
and
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CIHDJGIH
Specially chapter 4.4.4 for the moment, cant get pass step "Specify Installation Location"
First did I run RCU against our Oracle 11g database and created the schemas for BI Publisher
Then did I install JRockIT - jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
Then from JRockIT installed WLS_1035 generic.
Then configure AdminServer so thatone is up and running (even installed a HTML server from E1 to check if WLS is up and running and working)
Then start the installer (Oracle Business Intelligence, v. 11.1.1.5.0, for Microsoft Windows x86-64-bit) disk 1, setup.exe, then must I choose "software only" install. But on step 3 och 9 can I not press next, the installer says that I do not have any "Application Server" running. I have installed on E:\Oracle\Middleware but the installer can not see any application there, but I can access it thru a browser.
Tests I have done,
Install loopback adapter
Deinstall loopback
Deactivated everything but IPV4 protocoll (we have also IPV6 on all server).
Verified that we have static ip on the server
Tried installer for BIP (OBIEE) with WLS AdminServer running and without have it running.
And checked the installer logs everytime, no errors, no warning.
Is there anyone how can guide me or give some tips? I am getting frustrated after 4 weeks without success.
Best regards,
Anders

Hi!
It is the installer who not working properly, when using the "Browse", I had to choose a comletly wrong place first, and then again choose the correct installation path, after that would the understand where I wanted to install.
Best regards,
Anders

Instalation problems on windows 8.1

I have had problems with my Itunes for some time, I kept on getting an CD Drivers not found message and to re-install Itunes. So I had time today to mess around with it, so I uninstalled Itunes and when I would try to install, the installer would get to the point of coping files then roll back and give me an error message to download and install again? Is there a tool that will completely uninstall all file, even registry keys, or are there Faqs that would guide through a registry hack, to eliminate these crumbs that are peventing the insallation?

In order to diagnose your problem you will need to download and install the below
Install the WPT (Windows Performance Toolkit)
http://www.microsoft.com/en-us/download/details.aspx?id=30652
Help with installation (if needed) is here
When you have, open an elevated command prompt and type the following
WPRUI.exe (which is the windows performance recorder) and check off the boxes for the following:
First level triage (if available), CPU usage, Disk IO.
If your problem is not CPU or HD then check off the relevant box/s as well (for example networking or registry) Please configure yours as per the below snip. This will reboot your system so make sure you save your
work
Click Start
Let it run for 60 secs or more and save the file (it will show you where it is being saved and what the file is called)
Zip the file and upload to us on Onedrive (or any file sharing service) and give us a link to it in your next post.
Wanikiya and Dyami--Team Zigzag

Oracle 8i EE Install problems on Windows 2000

Problem 1 - LENGTH OF INSTALL FILES PATH.
The Oracle Universal Installer was coming up fine, but the "Next" button wouldn't do anything. After much trial and error, I discovered this to be related to the path of the install files. Rather than burning to CD, I had copied the install files into a directory C:\ORA816 - when I renamed this directory to just C:\O, the "Next" magically began working. This problem only occurs on Windows 2000, not NT4.
Problem 2 - CREDENTIAL RETRIEVAL FAILED.
I got this error (ORA-12638) from the Database Configuration Assistant. This just happened, so I haven't had a chance to figure it out. Has anyone encountered/fixed this problem in Windows 2000? I am running the install as Administrator.
null

Re: Problem 2. Just found out that this problem is resolved by removing the line SQLNET.AUTHENTICATION_SERVICES from
%ORACLE_HOME%\network\admin\sqlnet.ora
(see: http://technet.oracle.com//tech/migration/workbench/htdocs/relnotes.htm)

Installing JRE in windows IA64 bit machine

I need to install JRE in windows IA64 but I could not find it in the download page. Does any one know if this is still supported? Where can I download the JRE?
Thank you.

Do you specifically need JRE/JDK1.5? As per your reply, it does not seem to be so. In that case, just use JDK1.4
http://java.sun.com/j2se/1.4.2/system-configurations.html
It supports windows on Itanium. Also, as you mentioned Jrockit is another alternative. I am not sure, but IBM JDK is also an option, if they have already ported it

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

New Canon Pixma MG2220 printer - install problems on Windows XP

I bought a new Pixma MG2220 printer and received it 2 days ago. I followed the instructions and installed it from the provided CD on my 10 year old Compaq S4020WM desktop computer upgraded with 1GB RAM and 1TB hard drive running Windows XP SP3.
The CD installation took a very long time to complete (maybe an hour or so) and things did not work right. In particular the My Image Garden software was very slow and sluggish to respond. So I downloaded and installed the latest drivers and software from the Canon website on top of the existing installation, which did not help. The My Image Garden software began crashing completely with an error message about a bad .dll file. After talking to Canon tech support on the telephone, the support tech admitted that this software CD was probably not compatible with my old XP computer. The My Image Garden software uses like 500MB RAM which is too much resources for my machine. So the rep had me uninstall My Image Garden.
At that point I decided to uninstall everything and start over from scratch because something was obviously not right. For example, the Canon MP drivers were using 755 MB RAM, which seemed much too large. Obviously things had not installed properly from the setup CD, in general. The date on the setup CD was 2011, so apparently it was 2 years old, and long out of date!?
So I uninstalled everything except the Canon registration and onscreen user manual. I also kept Windows Adobe RGB 1998 because I didn't see any way to uninstall it. I also uninstalled .NET 4 which the setup CD had said was necessary, as well as Microsoft XPS EP which My Image Garden had also told me was needed. Then I cleaned up my computer as well as possible with help of Revouninstaller and Ccleaner, which was necessary because things were very messy with many uninstalled remnants and incorrect registry entries. I feel lucky to have survived those tasks without having to reinstall my op system. It wasn't easy.
Then I installed the following 2 modules (only) downloaded from the Canon website:
MG2200 series MP Drivers Ver. 1.01 (Windows 8/8...        01/31/13    14.07 MB
File Name: mp68-win-mg2200-1_01-ejs.exe
This file is a driver for Canon IJ multifunction printers. You can install the following items of the software: MP Drivers: The driver for Canon IJ multifunction printer. IJ Scan Utility: The software that allows you to easily scan photos, documents, etc.
*My Printer Ver. 3.1.0 (Windows 8/8 x64/7/7 x64/...        01/07/13    5.12 MB
File Name: mypr-win-3_1_0-ea11_2.exe
This file allows you to easily change the settings such as the paper source settings and provides you with information on how to solve problems such as ink smudging.
I believe that's everything required to access all of the print, copy, and scan operations of this MG2220 printer. Based on my current understanding, I would classify everything else as optional. I use free Irfanview for editing and manipulation of images, which seems a satisfactory substitute for the other software.
I did not reinstall .NET 4 or Microsoft XPS EP, because apparently they're only required if you install the My Image Garden and/or Quick Menu modules. I also did not reinstall the Easy-WebPrint EX module which apparently only applies to printing with the Internet Explorer browser, while I primarily use Firefox, Chrome, or Opera browsers. And of course I did not reinstall My Image Garden nor the Quick Menu, which were so problematical originally.
On the bright side, the Canon MP drivers appeared to install correctly this time, using only 35 MB RAM (vs 755 MB previously). Also the Canon IJ Scan utility was reinstalled automatically as a part of that driver installation process. Those items have their own shortcuts. I found it useful to make one additional shortcut via Start > Settings > Printers and Faxes > "Canon MG2220 series printer", to allow easy access to all of the internal printer settings and variables. Like I said, I believe this is all that's required, in addition to some image manipulation software such as Irfanview. I deal mostly with documents and never print photos nor use cameras. Those who have large photo collections and/or cameras may need something like My Image Garden or Easy-PhotoPrint EX.
I previously used Lexmark printers for the prior 10+ years, where everything is controlled by software from the computer. I never had to use the buttons on the printer. That's obviously different with this Canon printer, which will take some getting used to.
I'm disappointed that there's apparently no way to enlarge or reduce the % copy size with this model. Is there? I also don't find any setting for lighter/darker when making copies. Is there? There are apparently no other enhancements or filters available when copying. Are there? Similarly, scanning seems remarkably unversatile with this model and I can't find any way to set a scan for ligher/darker or apply various enhancements/filters. Are there?
The printing seems OK, but I must still decide whether the very limited copy and scan options will be sufficient to my needs. I'm not sure yet. I might take it back for a refund and get something better, if I knew what was better. That's another research project. Suggestions?
Thanks for any feedback.

Thanks for your info but the MG5420 is more than twice the cost at my local Walmart and Staples stores.
I thought I was being smart to buy the MG2220 as a later model(?), but it looks like the prior model MG2120 has more copier and scanner features according to the online specs at the Canon website (see copies below).
For example the MG2120 allows 25%-400% reduction/enlargement when copying, while the MG2220 does not. Can you verify this?
Also does the MG2120 allow for setting copying to lighter/darker? (I don't understand that complicated technical lingo in the specs.)
Thanks.
Pixma MG2120
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds8
Reduction / Enlargement   25% - 400%
Copy Features   4-in-1 / 2-in-1, Auto Exposure/Intensity Copy, Face Brightener/Fading Correction, Fit-to-Page, Gutter Shadow Correction Copy, Image Repeat, Intensity, Multiple Copy: 1-9, 20 Pages, Photo Reprint, Preset Copy Ratios, Zoom
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Document Fix, Auto Scan Mode5, Gutter Shadow Correction, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"
Pixma MG2220
Copier
Copy Speed (up to)   FCOT(Color) Approx. 30 seconds3
Copy Features   Borderless Copy, Fit-to-Page, Multiple Copy: 1-9, 20 Pages
Scanner
Scanner Type   Flatbed
Scanning Element   Contact Image Sensor (CIS)
Max. Resolutions   Optical:1200 x 2400 dpi
Interpolated:19,200 x 19,200 dpi
Scanner Features   Auto Scan Mode, Push Scan
Color Depth   48-bit internal/24-bit external
Max. Document Size   8.5" x 11.7"

Installing iTunes on Windows 64 bit XP

Where can I find the installation file for iTunes, that can be installed on Window XP, 64-bit? The file I downloaded from itune.apple.com gives me an error stating "This iTunes installer requites Windows Vista 64-bit edition."

I'm sorry you are having problems with iTunes.
It is best to reach out to Apple http://bit.ly/OBKBjr to get additional information on that product.
Thanks!
Tamara H.
Follow us on Twitter @VZWSupport

SQL Developer install problems for Windows 7 Home edition

Hi there,
I understand Windows 7 64-bit is not supported for oracle 11gR2 but I installed it anyway.
This is not my problem.
I am trying to install SQL Developer and am getting this error when I click on the set up:
Unable to launch the Java Virtual machine, located at path:
C:\Program Files(x86)Java\jdk1.6.0_21\bin\msvcr71.dll
When I check the version of my java it is correctly displaying 1.6.0_21 for my 64 bit.
I read that you need the 32 bit one installed as well and I do. In my Program Files there is a java and a \jdk1.6.0_21 folder. In the bin directory it does not have this .dll:
msvcr71.dll
Is that the problem, because i have heard of other people getting sql developer working on their Windows 7 home laptops but they are old posts and I'm not getting any reply.
I also changed the Environmental variable for the path, such as:
C:\Program Files (x86)\Java\jdk1.6.0_21
C:\Program Files (x86)\Java\jdk1.6.0_21\bin
C:\Program Files (x86)\Java\jdk1.6.0_21 /bin
and none of the 3 above worked for me either.
Any suggestions are appreciated!

I unzipped the sql developer download to C:\Windows and it unzipped fine. I went into my folder of sql developer, double clicked the sql developer.exe and it asked for the path for java. I clicked Browse and the default was C:\Program Files(x86)\Java\jdk1.6.0_21\bin so I chose the java from this folder. It accepted the argument, tried to start sql developer, and came up with the same error, so something is still not right that I am not understanding??

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

ITunes not compatible with iPod Touch 4th gen (problem with Windows 64 bit)

So I've been trying for about a month or so to sync my iPod Touch to iTunes but ever since i updated it to iTunes 11 it has been saying that i need to uninstall it and install the 64 bit version. I've done that twice this week alone and its still not working, saying again that i need the 64 bit which I already have. I've ended up completely erasing previous iTunes data to see if that would help, but that just ended up being more hassle. I don't think its just my iPod, because it refuses to sync my iPad 2 manually as well.
Please help me, i'm at my wits end.

You are very perceptive - has nothing to do with your ipod, has to do with your Windows. You can try couple things.
One - reinstall itunes "apple way" and when downloading disable your anitvirus.
http://support.apple.com/kb/HT1923
please make sure that you completed not only step one, but also step two.
Then disable your antivirus and go to step three.
iTunes 11.0.5 for Windows 64 - Apple - Support
if that does not work go to thing number two.
Two - come back here with precise text of the message, see if anybody had it before.

Install problem on Windows 7 64-bit

Similar Messages

Maybe you are looking for