Install SAP ERP 6.0 - Domain does not exist. Create user failed.

Hi experts,
I have encounter a problem while installing the the SAP ERP 6.0 by IDES Installation Master.
I got no idea about whats wrong here. Please help me out.
Thanks.
Warning: Unable to get the name of the domain.
INFO[E] 2009-08-07 14:28:46.439
FSL-01027  Account user="PHOENIX\SAPServiceEC6" does not exist.
WARNING 2009-08-07 14:28:46.439
Unable to get the name of a domain controller for domain .
WARNING[E] 2009-08-07 14:28:46.455
FSL-01002  Unable to create account PHOENIX\SAPServiceEC6. HRESULT=0x80005009
WARNING[E] 2009-08-07 14:28:46.455
MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-08-07 14:28:46.455
FCO-00011  The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
Kind Regards,
George.

> I choosed typical setting, the system didnt prompt me to choose anything regarding about domain.
Ok - then the system chooses a domain installation - which is the default.
I suggest you stop the installation, run the uninstaller, boot the machine and start over using "Custom" if you want to do a local installation.
Markus

Similar Messages

  • ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS"

    While calling dbms_stats.seed_col_usage I got the following error. Can someone help me on how to resolve it
    sqlplus
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Apr 14 14:37:38 2011
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Enter user-name: / as sysdba
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> select * from v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    SQL> show user
    USER is "SYS"
    SQL> begin
    2 dbms_stats.seed_col_usage(null,null,400);
    3 end;
    4 /
    begin
    ERROR at line 1:
    ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS".
    ORA-06512: at "SYS.DBMS_SQLTUNE_INTERNAL", line 17379
    ORA-06512: at "SYS.DBMS_STATS", line 28451
    ORA-06512: at line 2
    Thank You
    Sarayu

    According to the documentation:
    SEED_COL_USAGE ProcedureThis procedure iterates over the SQL statements in the specified SQL tuning set, compiles them and seeds column usage information for the columns that appear in these statements.
    Syntax
    DBMS_STATS.SEED_COL_USAGE (
    sqlset_name IN VARCHAR2,
    owner_name IN VARCHAR2,
    time_limit IN POSITIVE DEFAULT NULL);>
    It looks like you need to provide a SQLSET_NAME and OWNER_NAME to use this procedure correctly, to which you've provided NULLs. I don't see any exceptions in the documentation that indicate special processing when NULLs are provided.

  • Error : Query does not exist in user group

    Hello,
    I copied the one existing transaction i.e. Z10SD25 and made the new transaction.
    Also i created the new Infoset and Query in an existing User group.
    I also assigned the Infoset to user group and query to Infoset.
    But while running the new transaction it is giving me error that 'Query does not exist in user group'.
    Kindly help me with this.
    Thanks in advanced.
    Regards,
    Darshana

    Hi,
    After assigning the Infoset to user group and query to Infoset, click on 'Generate' button.
    Note: The query can only be generated when the InfoSet is assigned to a user group.
    Also check whether the usergroup is given or not for queries.
    SQ01 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving

  • PowerOn Failed Error: Domain Does Not Exist

    [Simon Thorpe's blog |http://blogs.oracle.com/simonthorpe/2009/07/migrating_a_vmware_server_2_wi.html] I'm new to OracleVM. The wizard through OVM Manager successfully converted a windows VMWare vm to ovm. I was able to start up the VM once and get the driver updates loaded. I was following Simon Thorpe's blog and other documents to complete this.
    Upon reboot, I get the following error:
    Start - /OVS/running_pool/ECM_Xmonth_2010_vm
    PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/vm.cfg'] => Error: Domain 'ECM_Xmonth_2010_vm' does not exist.
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
    run_cmd(args=cmd)
    File "/opt/ovs-agent-2.3/OVSCommons.py", line 69, in run_cmd
    raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
    >
    StackTrace:
    File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 113, in start_vm
    raise e
    Here's my vm.cfg
    acpi = 1
    apic = 1
    builder = 'hvm'
    device_model = '/usr/lib/xen/bin/qemu-dm'
    disk = ['file:/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/ECM_XMonth_2010_disk.img,hda,w',
    ',hdc:cdrom,r',
    kernel = '/usr/lib/xen/boot/hvmloader'
    maxmem = 2999
    memory = 2999
    name = 'ECM_Xmonth_2010_vm'
    on_crash = 'restart'
    on_reboot = 'restart'
    pae = 1
    sdl = 1
    serial = 'pty'
    timer_mode = '0'
    usbdevice = 'tablet'
    uuid = '4d3f3741-e29c-472a-bfaf-7416d31d21e8'
    vcpus = 1
    vif = ['bridge=xenbr0,mac=00:16:3E:4C:BF:71,type=ioemu']
    vif_other_config = []
    vncconsole = 1
    vnclisten = '0.0.0.0'
    vncpasswd = '****'
    Any advice?
    Edited by: dierardi on Jan 6, 2010 9:21 AM
    Edited by: dierardi on Jan 6, 2010 9:24 AM
    Edited by: dierardi on Jan 6, 2010 10:00 AM

    dierardi wrote:
    PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/69D37D3828A040A08A7E01E5DE43C1D8/running_pool/ECM_Xmonth_2010_vm/vm.cfg'] => Error: Domain 'ECM_Xmonth_2010_vm' does not exist.Check /var/log/xen/xend.log for errors during boot: Essentially, the domain is failing to be created properly on startup.
    If this is a linux guest, try running xm create -c vm.cfg from the ECM_Xmonth_2010_vm directory to start the guest with the console immediately attached. You may be able to see a boot/GRUB related error. If this is a Windows guest, you could start it paused with xm create -p vm.cfg and then attach a VNC console. Once you have a VNC session, you can resume the guest and it will begin booting.

  • Namespace Errors System Error 1355 - Specified domain does not exist or could not be contacted

    Ok, lets start with my environment:
    dc1 - windows server 2003 r2
    dc2 - windows server 2012 r2
    fs1- windows server 2003 r2
    fs2 - windows server 2012 r2
    Namespace - \\<fqdn>\data  (the fqdn would be like contoso.microsoft.com)
    I am in the process of migrating everything from server1 to server2 (dc and fs listed above).  I am done with mostly everything except DFS.  I have migrated the data, setup permissions, shares, etc. and replicated the data between fs1 and fs2.
     I have verified that all data is currently replicated and up to date, so no backlogs.  I am trying to add dc2 and fs2 as namespace servers.  This is so that I can point all of the referrals to FS2 that way when I remove FS1 no one gets an error
    about not being able to find the files.  The problem is that from all 4 servers, I receive an error message when loading the namespace via DFS Management tool.  I then thought because of the drastic differences between the versions, the next best
    thing would be to export the namespace and then import it into the new server, but even attempting the export command (dfsutil) gives me the same error.  My suspect is that the original namespace server was removed sometime ago without the previous IT
    person properly migrating everything (but I am at a loss cuz here I am).  I then thought if I go through ADSIedit, I can change the namespace server to the new one for all of my shares, and then possibly be able to load the namespace within the MMC tool
    (again just a guess); however, I cannot find anything listed for namespace or remoteservers under the properties of the share.
    Note:  the namespace does work when I navigate to it from a PC.  \\contoso.microsoft.com\data does bring up folders and files.  (changed the name for obvious reasons)
    At this point, I just want to have my new namespace server, so that I can change the referrals, and decommission my other servers.  (And yes there are many other steps I need to perform for the decommissioning, but that's not the point of this).  I
    have read numerous articles on this and haven't found a way to accomplish what I want.  Even though I walked through the steps listed for those issues and unfortunately they either did not apply or did not work.  I prefer to not use ADSIedit if at
    all possible, simply because it's not the "clean" way of doing things, but if I have no other option then I have no other option.
    Edit 1:  In event viewer on dc1, under File Replication Service on the left hand side, I see the following error appear numerous times (not every day, but still a lot).  I have not performed any of the steps listed simply because
    I do not know if this pertains to my problem and I don't want to start troubleshooting a server I plan on decommissioning unless I need to (say for the above issue):
    Event ID:  13568
    Source: NtFrs
    Description:
    The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR. 
     Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" 
     Replica root path is   : "c:\windows\sysvol\domain" 
     Replica root volume is : "\\.\C:" 
     A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found.  This can occur because of one of the following reasons. 
     [1] Volume "\\.\C:" has been formatted. 
     [2] The NTFS USN journal on volume "\\.\C:" has been deleted. 
     [3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal. 
     [4] File Replication Service was not running on this computer for a long time. 
     [5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:". 
     Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state. 
     [1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
    Service. 
     [2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set. 
    WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again. 
    To change this registry parameter, run regedit. 
    Click on Start, Run and type regedit. 
    Expand HKEY_LOCAL_MACHINE. 
    Click down the key path: 
       "System\CurrentControlSet\Services\NtFrs\Parameters" 
    Double click on the value name 
       "Enable Journal Wrap Automatic Restore" 
    and update the value. 
    If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Edit 2: I have verified that firewalls are off and I can communicate to all 4 servers from each other.
    Edit 3:  Attempted to try and fix error reported in 'Edit 1'; however the registry key mentioned does not exist (looked at all 4 servers to verify).

    I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating.  I
    could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
    The listed registry key does not exist
    Expand HKEY_LOCAL_MACHINE. 
    Click down the key path: 
       "System\CurrentControlSet\Services\NtFrs\Parameters" 
    Double click on the value name 
       "Enable Journal Wrap Automatic Restore" 
     

  • SAP integration kit - MDX parser does not exist

    Hi,
    While running a query via Web Intelligence, during the process where data should be retrieved, the error pops up that RFC destination MDX PARSER does not exist.
    The universe is built on an infoCube without intermediate BEx query.
    I know about the existence of note 1032461, but it didnu2019t get us further:
    -     Librfc32.dll (the one included during KIT installation) is at the right place.
    -     MDX BW Driver was included in transports.
    -      A RFC connection test via sm59 was positive.
    Anybody who had same error or having tips?
    All help would be highly appreciated since this should be fixed asap.
    Here some additional questions:
    1)     why program mdxsvr is listed in unix directory (visible via al11), and not on BO server site?
    2)     The librfc32.dll file included in the installation has a lower patch number then the patch number when downloading from sap marketplace.
    Is this important even when Patch Level is the same? So still necessary to change this file with version separately downloaded?
    3)     Is it necessary that MDX is added to the BW internet communication framework (transaction SICF  sap  bw  bex, Mime, xml, and also MDX necessary?)
    4)     Should the BW system be added to the broadcasting availability (spro)?
    5)     Could this indicate a problem with the java connector?
    6)     We created a RFC connection following the advice about BO-BW connection. But, is there need of an additional connection called u2018MDX Parseru2019. If yes, where do I find info how-to?
    Here the full error:
    A database error occured. The database error text is: The MDX query SELECT {  } ON COLUMNS , [0COMP_CODE].[LEVEL00].MEMBERS DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [ZCO_PA_2/ZCOPA_DAILY_AGGR] SAP VARIABLES [0P_FPER] INCLUDING [0FISCPER].[K42010001] [ZCURR1] INCLUDING [0CURRENCY].[EUR] failed to execute with the error Error occurred when starting the parser: RFC destination MDX PARSER does not exist.. (WIS 10901)

    Hi,
    hhmm - i can still see it and status is "released to customers"
    If you have a S-User and pwd use this link:
    https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132363135303726
    Regards
    -Seb.

  • Domain does not exist or could not be contacted...

    Hello all,
    Recently attempted to add another Windows 2008R2 server to our existing DSFW domain and am receiving the following error:
    The specified domain either does not exist or could not be contacted
    Looking at the windows debug log the following sticks out:
    NetpDoDomainJoin: status: 0x54b
    Everything else appears normal with the domain, authentication etc. I've run every check from Novell TID 7001884 (Verify a Domain) and all return proper information. I've done SRV record checks using the check-dns.pl "Cool Tool" it says all of the SRV records are fine.
    When attempting to join the domain the /var/opt/novell/xad/log/kdc.log presents one weird result:
    krb5kdc[1054](info): no valid preauth type found: Unknown code 0
    That error immediately appears upon inputting credentials in the Windows server and pressing enter
    If I unzip one of the previous logs where a server was joined I do not see that 'unknown code 0' error, rather I see the normal message logs.
    The server is:
    SLES
    VERSION = 11
    CO-BRANDS = SLE openSUSE
    SUSE Linux Enterprise Server 11 (x86_64)
    VERSION = 11
    PATCHLEVEL = 1
    patches as of that service pack are in place, I havn't yet updated to OES11 SP2 that's on the agenda.
    Any ideas, I've been beating my head against the wall most of last night / this fine weekend AM.
    Thanks,

    Hi amginenigma,
    Please ensure the following
    1. Ensure the time of the workstation is in sync with that of DSfW DC.
    2. Validate the Domain services using "xadcntrl validate" command.
    Hope you are trying with a valid domain administrator user.
    3. Perform a kinit on DC for the same user for which the join is failing and if kinit goes fine, then perform a ldapsearch over GSSAPI (pt. "a" below) and see if the ldapsearch is failing with any GSSAPI related errors. If so, we would want to get more information for that failure (pt. "b" below).
    a. Run the command
    SASL_PATH=/opt/novell/xad/lib64/sasl2/ ldapsearch -Y GSSAPI -s base -b "".
    During the execution capture the ndstrace.log with TIME, TAGS, MISC and NMAS set.
    b. Check the output of the following command :
    LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf ldapsearch -Y EXTERNAL -s base -b "cn=<DC-name>,ou=Domain controllers,<mapped-partition>" -Z serviceprincipalname
    Here, <DC-name> is the domain controller's host name. And the <mapped-partition> is the partititon which is mapped while creating the domain.
    This would give the list of service principal names in created for domain controller.
    4. If still no luck, please reach to NTS for help.
    -Kamalesh

  • Admin group does not exist - creating problems

    Hi,
    On my computer I have no my admin rights after an update (I think). All users are standard users. I have tried to resolve this situation by following the instructions in TS1278. This does not help. I can check (enable) "Allow user to administer this computer" but it does not stay checked. Logging out and in does not help.
    I have also tried creating a new user as an Administrator but it gets created as a Standard user. I did this by authenticating as root (enabled by the TS1278 actions).
    # dscl . -list /groups
    Lists the available groups and there is no group called 'admin' in there, perhaps this is the problem? Now my question is, how can I create a new admin group with the same id (80) as the admin group used to have?
    I do not know what removed the admin group.
    Thanks
    Christian

    See if this helps: I lost my admin user (Mac OS X 10.5) and OS X 10.5- Administrator user changes to standard.

  • MSI not installing via Group Policy - Insists location does not exist

    Hi
    I am creating a group policy object whereby I am pointing my software package installation to \\192.168.1.3\GPO\MSOCached32bit.msi
    The location has permissions for the machine accounts on both the share and the ntfs permissions with read only access.
    I have created an OU and moved a Windows XP machine into it, linked the GPO and made sure that the XP machine is not using optimised log on.
    From the machine I can reach the share and see the file from the path above.
    However each time I reboot the machine I am testing on the installation fails, the exact error being:
    The install of application MSO from policy MSO Installation failed. The error was : The installation source for this product is not available. Verify that the source exists and that you can access it.
    This is rather odd, since I can see it, the machine account has permissions to see it and I cannot see what the problem is.
    I have then gone on to enable verbose logging of the MSI installer which has produced the following:
    === Verbose logging started: 18/08/2011  15:36:18  Build type: SHIP UNICODE 3.01.4001.5512  Calling process: \??\C:\WINDOWS\system32\winlogon.exe ===
    MSI (c) (AC:B0) [15:36:18:666]: Resetting cached policy values
    MSI (c) (AC:B0) [15:36:18:666]: Machine policy value 'Debug' is 7
    MSI (c) (AC:B0) [15:36:18:666]: ******* RunEngine:
               ******* Product: {96b77fe2-a045-4f3f-9a73-1bf359d0eaaf}
               ******* Action:
               ******* CommandLine:
    MSI (c) (AC:B0) [15:36:18:666]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (AC:B0) [15:36:18:666]: Grabbed execution mutex.
    MSI (c) (AC:B0) [15:36:18:736]: Cloaking enabled.
    MSI (c) (AC:B0) [15:36:18:736]: Attempting to enable all disabled priveleges before calling Install on Server
    MSI (c) (AC:B0) [15:36:18:736]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (B4:CC) [15:36:18:756]: Grabbed execution mutex.
    MSI (s) (B4:D0) [15:36:18:766]: Resetting cached policy values
    MSI (s) (B4:D0) [15:36:18:766]: Machine policy value 'Debug' is 7
    MSI (s) (B4:D0) [15:36:18:766]: ******* RunEngine:
               ******* Product: {96b77fe2-a045-4f3f-9a73-1bf359d0eaaf}
               ******* Action:
               ******* CommandLine:  CURRENTDIRECTORY="C:\WINDOWS\system32" CLIENTUILEVEL=3  CLIENTPROCESSID=940
    MSI (s) (B4:D0) [15:36:18:766]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (B4:D0) [15:36:18:766]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (B4:D0) [15:36:18:766]: User policy value 'DisableMedia' is 0
    MSI (s) (B4:D0) [15:36:18:766]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Looking for sourcelist for product {96b77fe2-a045-4f3f-9a73-1bf359d0eaaf}
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Adding {96b77fe2-a045-4f3f-9a73-1bf359d0eaaf}; to potential sourcelist list (pcode;disk;relpath).
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Now checking product {96b77fe2-a045-4f3f-9a73-1bf359d0eaaf}
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Media is enabled for product.
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Processing net source list.
    MSI (s) (B4:D0) [15:36:18:766]: SOURCEMGMT: Trying source \\192.168.1.3\GPO\.
    MSI (s) (B4:D0) [15:36:19:427]: Note: 1: 1314 2: \\192.168.1.3\GPO\
    MSI (s) (B4:D0) [15:36:19:427]: ConnectToSource: CreatePath/CreateFilePath failed with: -2147483648 1314 -2147483648
    MSI (s) (B4:D0) [15:36:19:427]: ConnectToSource (con't): CreatePath/CreateFilePath failed with: -2147483648 -2147483648
    MSI (s) (B4:D0) [15:36:19:427]: SOURCEMGMT: net source '\\192.168.1.3\GPO\' is invalid.
    MSI (s) (B4:D0) [15:36:19:427]: Note: 1: 1706 2: -2147483647 3: MSOCached32bit.msi
    MSI (s) (B4:D0) [15:36:19:427]: SOURCEMGMT: Processing media source list.
    MSI (s) (B4:D0) [15:36:19:437]: Note: 1: 2203 2:  3: -2147287037
    MSI (s) (B4:D0) [15:36:19:437]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
    MSI (s) (B4:D0) [15:36:19:437]: Note: 1: 1706 2: -2147483647 3: MSOCached32bit.msi
    MSI (s) (B4:D0) [15:36:19:437]: SOURCEMGMT: Processing URL source list.
    MSI (s) (B4:D0) [15:36:19:437]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
    MSI (s) (B4:D0) [15:36:19:437]: Note: 1: 1706 2: -2147483647 3: MSOCached32bit.msi
    MSI (s) (B4:D0) [15:36:19:437]: Note: 1: 1706 2:  3: MSOCached32bit.msi
    MSI (s) (B4:D0) [15:36:19:437]: SOURCEMGMT: Failed to resolve source
    MSI (s) (B4:D0) [15:36:19:437]: MainEngineThread is returning 1612
    MSI (c) (AC:B0) [15:36:19:437]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (AC:B0) [15:36:19:437]: MainEngineThread is returning 1612
    === Verbose logging stopped: 18/08/2011  15:36:19 ===
    As you can see from the above highlighted line, it says its invalid, but I cannot for the life of me understand why?
    Thanks in advance for any help!

    Hi,
    This is not something related to the GPO issue. The issue is with MSI and the packaging. Condition the ResolveSource action.
    Try Copying the MSI to local machine using a script and execute it.
    ResolveSource actually requires that the original installation source is available whenever it is called. If your installer package is authored correctly, source must only be resolve in cases where the original RTM files are missing or during some patch
    uninstall scenarios.
    http://blogs.msdn.com/b/heaths/archive/2007/10/25/resolvesource-requires-source.aspx
    http://msdn.microsoft.com/en-us/library/aa371232%28VS.85%29.aspx
    http://www.appdeploy.com/messageboards/printable.asp?m=48703
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before
    implementing!

  • Setting up a PDC: error-"The specified domain either does not exist or.....

    **** Everyone...
    Please, would someone give me some help to resolve the error (WIN7):
    "The specified domain does not exist or could not be contacted."
    I have Open Directory, DNS and SMB running. No errors are present.
    Any info I can give to help solve,please ask.
    Thank you.

    Sorry, that problem is not an DNS problem but an SMB 3.0.28a (version used in SLS 10.6.1) problem in conjunction with Windwos 7. It is well know that Samba versions before 3.3.4 won´t work with Windows 7, see http://ggts.net/2009/05/17/joining-a-windows-7-system-to-a-samba-domain/ and https://bugzilla.samba.org/show_bug.cgi?id=6680
    You can to some easy command-line test on the Win7 client, e.g. nltest dctest:<domainname> and you will see that domain and pdc are properly resolved but the client can not be added due to password bugs.
    It´s time for now Apple to move on to a more recent version of samba, version 3.0.28a is 20 months old!!!
    Right now, OS X Server 10.6.1 with OD/SMB as PDC is not usable with Windows 7 clients right now! Since this bug is known since 2 months and fixed 5 days later it´s quite impressing how Apple looks after their customers!

  • Jdeveloper 10 to 11g migration package does not exist

    Hi All,
    I am new to Jdeveloper, earlier I have used eclipse.  We have a web application which was developed using Jdeveloper 10 and now we are in progress of migrating it using  JDeveloper 11g (11.1.1.7.0).
    We have two projects(.jpr), lets say A1.jpr and A2.jpr with in the application (.jws) say App.jws. The old source has been migrated in Jdeve 11g using migration wizard successfully.
    In project A1,  a class from project A2 has been imported, Which was not able to recognized and I'm getting numerous errors when the A1.jpr was build.
    Note:The same code compiles without any error in Jdeveloper 10
    D:\Migration\App\src\test\pack\util\entities\UserImp.java
    Error(3,18): package com.util.permission does not exist
    Error(6,25): package com.util.domain does not exist
    Error(29,20): cannot find class domain
    Error(38,32): cannot find class permission
    It would be great if anyone could help me on this.
    Thanks in advance

    Hi,
    JavaLearner123 wrote:
    In project A2,  a class from project A2 has been imported, Which was not able to recognized and I'm getting numerous errors when the A1.jpr was build.
    Note:The same code compiles with any error in Jdeveloper 10
    D:\Migration\App\src\test\pack\util\entities\UserImp.java
    Error(3,18): package com.util.permission does not exist
    Error(6,25): package com.util.domain does not exist
    Error(29,20): cannot find class domain
    Error(38,32): cannot find class permission
    It would be great if anyone could help me on this.
    Thanks in advance
    Where those classes/packages resides ?
    Inside some .jar ?
    In tht case, add that .jar to the project Libraries and classpath.
    Right click on the ptoject, choose 'Libraries and classpath' and Add jar/directory to the project...

  • Planned Order Does not exist

    my Stocks and requirements list shows an MRP element of DEPreq for a element data (halb part number). Double clicking on the element I see the pegged requirement part number and planned order.  However. SAP says the planned order does not exist nor does the pegged requirement. I can trace upwards in stocks requirement to another part number. the Data element says DIRECT PRODUCTION. but again there is no requirement for that part nor can i get to the planned order for it either, SAP says it does not exist.
    These are  related part numbers which I suspect may have come from a common Bill of material; but there is no demand for the high level material but yet I have low level componenets in my Stock and requiremnts.
    Is this a table inconsistency issue?
    thanks in advance

    Hi Borries,
    Please go thru link below. This also could help enhance your knowledge in planned order.
    http://help.sap.com/saphelp_nw04/helpdata/en/c1/376535449a11d188fe0000e8322f96/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/5b/ae39704b8611d182ba0000e829fbfe/frameset.htm
    rgds,
    nanthakumar

  • Accessing a sequence which does not exists

    i have pl/sql code as below and the sequence  value is displayed based on condition.In case the sequence  does not exists and condition fails  the pl/sql is not getting compiled and throws error  saying that  sequence does not exists.
    For eg:
    declare
    i number;
    begin
    if ( 1=2)  then
    select  top_seq.nextval into i from dual;
    dbms_output.put_line('i'||i);
    end if;
    end;
    in above sequence  does not exist and condition is failed as it never access sequence, does the pl/sql  code execute successfully and  which is not  happening as it throws error  . sequence does not exists.

    910111 wrote:
    Hi,
    as Frank mentioned before, you can achieve that by using dynamic sql, see following example:
    DECLARE
      lc_sql       VARCHAR2(4000);
      ln_seqExists NUMBER       := 0;
      lc_seqName   VARCHAR2(30) := 'TOP_SEQ';
      i            NUMBER;
    BEGIN
      SELECT NVL(COUNT(*),0)
      INTO ln_seqExists
      FROM user_sequences
      WHERE sequence_name = lc_seqName;
      IF ln_seqExists     = 0 THEN
        lc_sql           := 'CREATE SEQUENCE ' || lc_seqName;
        EXECUTE immediate lc_sql;
      END IF;
      IF ( 1    = 1) THEN
        lc_sql := 'select  top_seq.nextval from dual';
        EXECUTE immediate lc_sql INTO i;
        dbms_output.put_line('i: ' || i);
      END IF;
    EXCEPTION
    WHEN OTHERS THEN
      dbms_output.put_line(sqlerrm);
    END;
    Regards
    Not everything that can be done should be done .... 
    Before showing someone how to shoot themselves in the foot, it would be best to determine that shooting themselves in the foot is the best and most appropriate course of action.

  • \OPatch\docs\etc\config\inventory" does not exist.

    Dear One,
    I have up-graded my Database 11.2.0.1 to 11.2.0.3.while applying the OPatch below error is coming...
    The specified path is not an interim Patch shiphome
    Meta-data files are missing from the patch area
    Patch location = F:\app\Administrator\product\11.2.0\dbhome_2\OPatch
    Details = PatchObject constructor: Input file "F:\app\Administrator\product\11
    .2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.2.0
    \dbhome_2\OPatch\etc\config\inventory" does not exist.
    ApplySession::process() cannot load PatchObject: PatchObject constructor: Input
    file "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\actions" or
    "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\inventory" does
    not exist.
    OPatch failed: PatchObject constructor: Input file "F:\app\Administrator\product
    \11.2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.
    2.0\dbhome_2\OPatch\etc\config\inventory" does not exist.
    Locker::release()
    Log file location: F:\app\Administrator\product\11.2.0\dbhome_2\cfgtoollogs\opat
    ch\opatch2013-01-19_14-56-18PM_1.log
    Cleaning up the directory : "F:\app\Administrator\product\11.2.0\dbhome_2\.patch
    _storage\patch_unzip"...
    OPatch failed with error code = 73
    So,pls suggest me anyone how can i proceed the OPatch apply.........

    you don't use optach to upgrade your database , Please Read the below Document That describe usage of Optach
    http://docs.oracle.com/cd/B19306_01/em.102/b16227/oui8_opatch.htm
    You Must have patch Number : 10404530 which can be downloaded from https://support.oracle.com
    Similar thread
    Upgrade 11.2.0.1 to 11.2.0.3

  • The company code 123 does not exist or has not been fully maintained

    hi...
    frnds..
    Error: The company code 123 does not exist or has not been fully maintained..
    While creating material master, am getting this error... how to resolve this...
    Thanks in advance...
    Raghav.KH

    Hi,
    Check in OX02 whether the city, country, currency and language are maintained and in OX16 it is assigned to company.
    If your company code does not exist create new entries by giving an ID and description and fill the above particulars and
    assign to the company.
    Regards,
    Sadashivan

Maybe you are looking for

  • Problem with Prepared Statement & MS Access

    Hi I have tried to find some info about this but can't see anything specific to what I think the problem may be. Hopefully someone can point me in the right direction.I am trying to get information out of an MS Access database using a Prepared Statem

  • No sound from browsers on streaming

    Hi everyone, For some times now i can't have any sound from my browers,Safari,Firefox,Camino etc, any of them. Every time i want to whatch something on the internet,(movie,song etc)i can't hear the sound...,i have to download it,if it's possible, and

  • Map tags to styles (CS6, Applescript)

    I want to map a series of tags to styles in InDesign, but this seems not to work. The inverse, mapping styles to tags, works! Any idea? Thanks for your help! tell application "Adobe InDesign CS6"           tell active document   make XML export map w

  • Do not updated quantity in transit field in DELINS JIT

    Hi, I have EDI defect in hand which states that Quantity field in transit for DELINS JIT has to be not updated. What exactly this means? Can any one let me know what needs to be done? Raghuram.

  • Nokia 6230i and Mercedes Car. Working.. Just a cou...

    Hi I've got a Mercedes C220 '55' reg. Nokia 6230i and Nokia B6 787 5846 The phone works well in the car, but I have a couple of questions: How do I program speed dials for use in the car ? If I press and hold '2' in the car, I get a error similar to