Install SQL 2012 sp1 Named Instance on SQL 2008 r2 Cluster

I am attempting to add a 2012 instance to my 2008r2 cluster, but at 'cluster node configuration' step, the drop down for sql server instance name is empty

Hi,
Seems you have worked it out. You can mark the answers accordingly. It will be nice to let thread stay there so other
community members
can benefit from it.
Please let us know if you would like further assistance.
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

  • Installing SQL 2008 / SQL 2012 in a DMZ covered by RODCs

    Hello guys,
    I'm trying to install SQL 2008 (tried also SQL 2012) in a W2008R2 server that lives in a DMZ site covered by a couple of RODCs.
    The RODCs have full access to the RWDCs, but the traffic is blocked from the rest of computers in the DMZ to the RWDCs.
    Every time I run the wizard to install SQL server, it fails when trying to setup a domain user to run SQL services
    (“Server configuration >> Service Account” step). When I temporary allow the communication from that SQL Server to one of the RWDCs, it works.
    I have obviously cached and prepopulated passwords in the RODCs and I am using Domain Admins and non-domain admins accounts.
    We have more than 30 windows member servers authenticating against those RODCs in the DMZ and everything works fine.
    Any ideas why the SQL installation wizard cannot authenticate against a RODC? I have been googling and I didn’t find anything!
    Btw, I have already posted a similar thread in the SQL forum. They suggested to "install SQL Server with a local Windows
    account and then change the SQL Server service account with to the Domain account". That actually works, but I'd like to find out what is wrong my RO AD setup or this is a just an expected
    behavior in SQL installations covered by RODCs.
    Thanks.

    Any update about the issue?
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • How to add a new instance to a 2 node SQL 2008 R2 Cluster under the same networkname

    Hello All,
    I'm fairly new to sql and have just deployed a new 2 node SQL 2008 R2 cluster.
    During installation, I created a networkname SQLCLU and a named instance I01.
    I now would like to add another Instance (I02) under the same networkname.
    What is the proper procedure to do this?
    I don't believe that I should do this using the action: "New SQL Server failover cluster" from the setup menu, but rather using the action "New Installation or add features to an existing installation"
    With the second option, I'm however not sure how I should make this instance clustered..
    Should I also execute the "New Installation or add features to an existing installation" action on the 2nd node in the cluster?
    Many thanks for your  advice!
    Filip

    You cannot use the same network name for 2 instances. You need to use a different network name for the second instance I02
    A failover cluster instance contains:
    A combination of one or more disks in a Microsoft Cluster Service (MSCS) cluster group, also known as a resource group. Each resource group can contain at most one instance of SQL Server.
    A network name for the failover cluster instance.
    One or more IP addresses assigned to the failover cluster instance.
    One instance of SQL Server that includes SQL Server, SQL Server Agent, the Full-text Search (FTS) service, and Replication. You can install a failover cluster with SQL Server only, Analysis Services
    only, or SQL Server and Analysis Services
    http://msdn.microsoft.com/en-in/library/ms179410(v=sql.105).aspx

  • [Forum FAQ] Management Point fails after installing SCCM 2012 SP1

    Symptom:
    The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
    You might see some errors in mpMSI.log like listed below.
    “Setup was unable to compile the file CcmExec_Global.mof”
    “The error code is 80041002”
    Cause:
    Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
    Resolution:
    1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
    2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete  _NAMESPACE.Name=”ccm”
    3. Install Management Point.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Symptom:
    The Management Point might fail to be installed after you install SCCM 2012 sp1 on Windows Server 2012, either fresh install or others.
    You might see some errors in mpMSI.log like listed below.
    “Setup was unable to compile the file CcmExec_Global.mof”
    “The error code is 80041002”
    Cause:
    Reinstall Management Point cannot work. This is because CCM Namespace remains in WMI which prevents SCCM from installing MP. You need clear CCM Namespace from WMI.
    Resolution:
    1. Uninstall Management Point from the console, then wait for the uninstallation to finish in MPSetup.log.
    2. Open Wbemtest -> Connect to root -> Click Enum Classes and choose Recursive -> Double click _NAMESPACE in Query Result dialog -> Click Instances -> Delete  _NAMESPACE.Name=”ccm”
    3. Install Management Point.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

  • Error installing SQL 2008 R2 anyversion. Error code: 1605

    SQL Server Setup has encountered the following error:
    MsiGetProductInfo failed to retrieve ProductVersion for package with Product Code = '{DF167CE3-60E7-44EA-99EC-2507C51F37AE}'. Error code: 1605..
    What I've done so far:
    1) Had to re-install Windows 7 because I kept getting a pop up that said my windows was unregistered, which it wasn't (known bug) so I re-installed as per MS recommendation.
    2) Un-installed SQL 2008 + ran Microsoft Fix It tool.
    3) Tried to re-install but I get this error.
    4) After I got the error I deleted all the registry entries per instructions available where other's have posted this same problem. Started by reversing key and deleting what I found in the registry. 
    5) When I continued to get the error I renamed the registry directory UpgradeCodes to UpgradeCodes.old. Still fails with the same error.
    6) I've rebooted after every step and I've repeated this many times...
    In all cases when I try to re-install it fails with Error code: 1605. At this point when I search the registry for the reversed key it is not found. It's gone.
    Not sure what to do next.
    Any suggestions would be appreciated. Thx

    Hi gridmaster54,
    According to your description, you fail to install SQL Server 2008 R2 with the error code 1605. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail logs are located in C:\Program Files\Microsoft SQL
    Server\100\Setup Bootstrap\Log.
    Based on my research, this issue could be due to the remains of a previous unfinished installation. To troubleshoot the issue, please pay attention to the points below.
    1.Make sure that your account has admin rights and you right-click the setup.exe and choose “Run as administrator” to install SQL Server.
    2.Make sure that your account has full control over the following key: HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\UserData\
    Regards,
    Michelle Li

  • How to install sql 2008 r2 in sql 2008

    Hi,
    I have DB stored in sql 2008.  i need to install sql 2008 r2 without db deletion in sql2008. please let me know which option i should choose and clear solution to me.
    Thanks,

    Hi,
    You can install SQl Server 2008 r2 side by side to SQL Server 2008 Microsoft supports this scenario. I would like you to read
    This article before proceeding .
    If you just want to move database from SQL server 2008 to SQL server 2008 r2 backup the database from 2008 and restore it on 2008 r2. Make sure you map orphaned users to logins
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Can not install SQL 2008 server R2

    Hello, 
      when I install SQL 2008 R2, there will be appear some error, and the detail log like these,
      2014-07-28 12:52:37 Slp: Running Action: NotifyProgressComplete
    2014-07-28 12:52:37 Slp: Sco: Attempting to set file full path to 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe.config'
    2014-07-28 12:52:37 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe.config'
    2014-07-28 12:52:37 Slp: Sco: Attempting to check if file 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe.config' exists
    2014-07-28 12:52:37 Slp: The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced
    2014-07-28 12:52:37 Slp: Completed Action: NotifyProgressComplete, returned True
    2014-07-28 12:52:37 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:37 Slp: Skipping Action: DeleteUninstalledPatchRegistryAndCacheFolderAction
    2014-07-28 12:52:37 Slp: Action is being skipped due to the following restrictions: 
    2014-07-28 12:52:37 Slp: Condition "Do any of the specified features match the expected scenario Uninstall" did not pass as it returned false and true was expected.
    2014-07-28 12:52:37 Slp: Completed Action: ExecuteExtendedTimingsWorkflow, returned True
    2014-07-28 12:52:37 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:37 Slp: Running Action: ExecuteCloseWorkflow
    2014-07-28 12:52:37 Slp: Workflow to execute: 'CLOSE'
    2014-07-28 12:52:37 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:37 Slp: Running Action: ProduceStatusLogs
    2014-07-28 12:52:39 Slp: Completed Action: ProduceStatusLogs, returned True
    2014-07-28 12:52:39 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:39 Slp: Running Action: FinalizeProgressStatus
    2014-07-28 12:52:39 Slp: Completed Action: FinalizeProgressStatus, returned True
    2014-07-28 12:52:39 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:39 Slp: Running Action: RebootMessageAction
    2014-07-28 12:52:39 Slp: Completed Action: RebootMessageAction, returned True
    2014-07-28 12:52:39 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:39 Slp: Skipping Action: FinishPage
    2014-07-28 12:52:39 Slp: Action is being skipped due to the following restrictions: 
    2014-07-28 12:52:39 Slp: Condition "Is the user's scenario set to EditionUpgrade" did not pass as it returned false and true was expected.
    2014-07-28 12:52:39 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:39 Slp: Running Action: CloseUI
    2014-07-28 12:52:39 Slp: Stop Action
    2014-07-28 12:52:39 Slp: Completed Action: CloseUI, returned True
    2014-07-28 12:52:39 Slp: Completed Action: ExecuteCloseWorkflow, returned True
    2014-07-28 12:52:39 Slp: Completed Action: ExecuteCompleteWorkflow, returned True
    2014-07-28 12:52:47 Slp: 
    2014-07-28 12:52:47 Slp: 
    2014-07-28 12:52:47 Slp: ----------------------------------------------------------------------
    2014-07-28 12:52:47 Slp: 
    2014-07-28 12:52:47 Slp: Error result: -2068119551
    2014-07-28 12:52:47 Slp: Result facility code: 1211
    2014-07-28 12:52:47 Slp: Result error code: 1
    2014-07-28 12:52:47 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine 
    2014-07-28 12:52:47 Slp: Sco: Attempting to open registry subkey 
    2014-07-28 12:52:47 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
    2014-07-28 12:52:47 Slp: Sco: Attempting to get registry value DW0200
    2014-07-28 12:52:48 Slp: Submitted 1 of 1 failures to the Watson data repository
    can you help me? thanks,

    Hi,
    According to your description, we need to verify that if the setup file of SQL Server is corrupted, if it is corrupted, as Shanky’s post, please download it again and reinstall SQL Server 2008 R2 .
    However, if the setup file is complete, please check if there is an anti-virus software or other third-party software on your computer blocking the process of SQL Server installation. In addition, make sure that you configure SQL Server service accounts
    appropriately with administrator permission during the installation. For more details about this error, please review this similar thread:
    Install SQL 2008 R2 on Win 8 fails with Microsoft.SqlServer.Configuration.Sco.ScoException
    For more information about installing SQL Server 2008 R2,please review this blog:
    SQL Server 2008 R2 Sysprep Step by Step.
    Thanks,
    Lydia Zhang

  • Exe compiled in LV 2010 crash - Since installing LV 2012 SP1 and 2013

    Exe compiled in LV 2010 crash - Since installing LV 2012 SP1 and 2013
    Double-click on exe icons (LV apps written in 2010), the application icon appears on taskbar then disappears (program crashes).
    I have tried re-installing the exe's but doesn't fix.  Is there an issue with the new LV RTE's?
    Any suggestions for fix???

    battler,
    Have you tried making your exe into a debuggable exe? You can do this through your project build specification Advanced>>Enable Debugging. Make sure you check the box for Wait for Debugger. This means when you launch your exe you can connect to it from LabVIEW and see your block diagrams, use highlight execution, probles etc. It is quite possible that you are running into an error case while your program is loading and it is exiting.
    Regards,
    Jeff Peacock 
    Product Support Engineer | LabVIEW R&D | National Instruments 

  • EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2

    Hi guys.
    We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
    Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
    Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
    We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
    However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
    This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
    This is not the first time that we have seen this behaviour.
    I have experienced it in one other environment, which I keep meaning to rebuild.
    These installations are in completely different environments.  The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
    The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
    It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
    However, this is now far too coincidental to be the case.
    Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
    I could really do with a quick win on this one.
    Thanks

    Hi,
    i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
    My system is different:
    Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
    and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
    The issue appears in the last months.
    It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
    I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
    I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
    Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
    Could you verify if on some machine the evdre works fine and and that when you delete the  added member evdre starts to work?
    Kind regards
    Roberto
    Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM

  • Management Point fails after installing SCCM 2012 SP1

    I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
    1. Newly built Windows Server 2012 box
    2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
    The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
    SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
    [19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
    [19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
    MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
    The error code is 80041002
    Error 25140. Setup was unable to compile the file CcmExec_Global.mof
    The error code is 80041002
    CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
    [19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
    [19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
    [19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
    MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
    Internal Error 25001. 80070057
    CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result. 
    Would really appreciate some help if anyone's fixed this issue

    I'm still struggling, I've uninstalled MP
    <04/16/14 08:06:59> SMSMP Setup Started....
    <04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
    <04/16/14 08:06:59> Deinstalling the SMSMP
    <04/16/14 08:06:59> No versions of SMSMP are installed.  Returning Success.
    <04/16/14 08:06:59> ~RoleSetup().
    Ran the command, Invoke-Command  {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
    Checked Namespace Instances to ensure '= ccm' is not longer there. 
    Rebooted Server and re-installed MP but it still fails
    <04/16/14 08:37:26> ====================================================================
    <04/16/14 08:37:26> SMSMP Setup Started....
    <04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
    <04/16/14 08:37:26> Installing Pre Reqs for SMSMP
    <04/16/14 08:37:26>         ======== Installing Pre Reqs for Role SMSMP ========
    <04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP 
    <04/16/14 08:37:26> Pre Req MSXML60 found.
    <04/16/14 08:37:26> No versions of MSXML60 are installed.  Would install new MSXML60.
    <04/16/14 08:37:26> Enabling MSI logging.  msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
    <04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi 
    <04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
    <04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
    <04/16/14 08:37:26> Pre Req SqlNativeClient found.
    <04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
    <04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
    <04/16/14 08:37:26>         ======== Completed Installation of Pre Reqs for Role SMSMP ========
    <04/16/14 08:37:26> Installing the SMSMP
    <04/16/14 08:37:26> Passed OS version check.
    <04/16/14 08:37:26> IIS Service is installed.
    <04/16/14 08:37:26> No versions of SMSMP are installed.  Installing new SMSMP.
    <04/16/14 08:37:26> Enabling MSI logging.  mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
    <04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
    SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
    <04/16/14 08:37:26> mp.msi exited with return code: 1603
    <04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
    <04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
    <04/16/14 08:37:26> ~RoleSetup().
    On checking I don't seem to have anything in IIS, no default web site.
    I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
    Any assistance would be greatly appreciated.
    Thanks

  • Sql 2008 r2 cluster side by side with sql 2012 cluster on Windows 2008 R2

    We have a SQL 2008R2 active/passive SQL cluster running on Windows 2008 R2 cluster.
    I would like to add a SQL 2012 clustered instance to the same Winows 2008 R2 cluster.
    Are there any issues involved having a SQL 2008 R2 clustered instance running side by side with a SQL 2012 instance in same Windows 2008 R2 cluster?
    Are there any pitfalls/"gotchas" to watch for with SQL 2012 cluster install?
    Thank you so much!

    Hello,
    Two instances, one SQL Server 2008 and the other SQL Server 2012, side-by-side, is fully supported.
    I would like to recommend you to assign a different port (not port 1433) to the non-default instance
    to avoid an IP address conflict between both instances.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Install SQL 2008 on Windows 7

    Hello,
    I recently upgraded my os from vista home edition to windows 7 home edition and now attempting to install SQL Server 2008 but receiving the following error message:
    "Failed to open registry key SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10.<InstanceName>\MSSQLServer\SuperSocketNetLib or set its security descriptor"
    In Summary log of the Setup Bootstrap, the installation is still picking up the previous OS.
    Here are the measures I have taken to resolve the issue but to no avail:
    - Install SP1 Cumulative Pack 4
    - Ensure the windows accounts have the appropriate permissions to the Registry key, SuperSocketNetLib
    - created a new windows admin account and ran the installation under Admin account
    - disabled firewall and anti-virus s/w
    - tried installing SP Cumulative Pack 8 but received error message that installation failed due to previous installation failure. Cumulative Pack 4 installed fine.
    I have Visual Studio 2008 SP1 installed on the same machine.
    Could the installation picking up the previous OS be the issue?
    Any help is appreciated
    jim

    Hi Sam,
    Thanks for the reply. It is appreciated. Unfortunately, I am running the Home edition of Windows 7, so ADUC is not available. However, I was able to locate the function "ReplaceAccountWithSidInSddl" in the Detail log and as you suggested, it appears that
    the the service account the function is attempting to use the culprit. I granted Full control to the account for the registry key. Here's a snippet of the error in the log. I have replace the name of computer with <COMPUTER_NAME>:
    2014-03-21 11:30:48 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;[SQLServer2005SQLBrowserUser$<COMPUTER_NAME>])(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: 
    D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;[SQLServer2005SQLBrowserUser$<COMPUTER_NAME>])(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: Sco: Account name to be translated into SID: SQLServer2005SQLBrowserUser$<COMPUTER_NAME>
    2014-03-21 11:30:48 Slp: Sco: Attempting to get account sid for user account SQLServer2005SQLBrowserUser$JAMES-PC
    2014-03-21 11:30:48 Slp: Sco: Attempting to get sid for user account SQLServer2005SQLBrowserUser$<COMPUTER_NAME>
    2014-03-21 11:30:48 Slp: Sco: GetSidForAccount normalized accountName SQLServer2005SQLBrowserUser$<COMPUTER_NAME> parameter to SQLServer2005SQLBrowserUser$<COMPUTER_NAME>
    2014-03-21 11:30:48 Slp: Sco: Account name is translated into: S-1-5-21-1616483530-113107344-425543671-1001
    2014-03-21 11:30:48 Slp: Sco: Final security descriptor:  D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 SQLEngine: Output SDDL D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU).
    2014-03-21 11:30:48 SQLEngine: Leaving Function NLRegSSetting.ReplaceSddlTags.
    2014-03-21 11:30:48 SQLEngine: Entering Function NLRegSSetting.SetSecurityDescriptor.
    2014-03-21 11:30:48 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2014-03-21 11:30:48 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10.<INSTANCE_NAME>\MSSQLServer\SuperSocketNetLib
    2014-03-21 11:30:48 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: 
    D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: 
    D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: Sco: Attempting to set security descriptor D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: Sco: Attempting to normalize security descriptor D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: 
    D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: 
    D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: Sco: Attempting to normalize security descriptor D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: Sco: Attempting to replace account with sid in security descriptor D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: ReplaceAccountWithSidInSddl -- SDDL to be processed: 
    D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: 
    D:(A;CI;KRKW;;;S-1-5-21-1616483530-113107344-425543671-1016)(A;CI;KR;;;S-1-5-21-1616483530-113107344-425543671-1001)(A;CI;KR;;;BU)
    2014-03-21 11:30:48 Slp: Prompting user if they want to retry this action due to the following failure:
    2014-03-21 11:30:48 Slp: ----------------------------------------
    2014-03-21 11:30:48 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2014-03-21 11:30:48 Slp: Inner exceptions are being indented
    2014-03-21 11:30:48 Slp:
    2014-03-21 11:30:48 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
    2014-03-21 11:30:48 Slp:     Message:
    2014-03-21 11:30:48 Slp:        
    Attempted to perform an unauthorized operation.
    2014-03-21 11:30:48 Slp:     Data:
    2014-03-21 11:30:48 Slp:       WatsonData = SuperSocketNetLib
    2014-03-21 11:30:48 Slp:       DisableRetry = true
    2014-03-21 11:30:48 Slp:     Inner exception type: System.UnauthorizedAccessException
    2014-03-21 11:30:48 Slp:        
    Message:
    2014-03-21 11:30:48 Slp:                
    Attempted to perform an unauthorized operation.
    2014-03-21 11:30:48 Slp:         Stack:
    2014-03-21 11:30:48 Slp:                
    at System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
    2014-03-21 11:30:48 Slp:                
    at System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode,
    Object exceptionContext)
    2014-03-21 11:30:48 Slp:                
    at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
    2014-03-21 11:30:48 Slp:                
    at Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
    2014-03-21 11:30:48 Slp:                
    at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.GetAccessControl()
    2014-03-21 11:30:48 Slp:                
    at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2014-03-21 11:30:48 Slp: ----------------------------------------<COMPUTER_NAME>
    The service account being used in from SQL 2005 Express that was installed via VS 2008.
    Help is appreciated.
    jim

  • SCCM 2012 moving site Database server from SQL 2008 R2 cluster to 2012 cluster

    Hello,<o:p></o:p>
    Using the SCCM 2012 setup, I get
    the following errors and then it eventually fails……I’ve been uninstalled and
    installed SQL native client .....still unable to move SQL database,i get this error:<o:p></o:p>
    *** Failed to connect to the SQL Server, connection type: SMS ACCESS. Configuration Manager Setup 25/02/2015 21:01:03 8624 (0x21B0)
    INFO: SQL Connection failed. Connection: SMS ACCESS, Type: Secure Configuration Manager Setup 25/02/2015 21:01:03 8624 (0x21B0)
    *** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 25/02/2015 21:01:07 8624 (0x21B0)
    *** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 25/02/2015 21:01:07 8624 (0x21B0)
    I know that the problem is related to a certificat issue but i didn't arrived to resolve it.

    Have a look at this post (pay special attention to the comments):
    http://blogs.technet.com/b/configurationmgr/archive/2013/04/02/how-to-move-the-configmgr-2012-site-database-to-a-new-sql-server.aspx
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Error: "PackageFromTheweb" when install SQL Server 2000 cluster

    Hi,
    I am trying to setup a WAS 6.40 system. When I am installing SQL Server 2000 on cluster, I got following error: "This program is used internally by PackageFromTheWeb. It should not be executed directly." Our OS is Windows 2003 Enterprise SP2. Search on the internet many have the same problem but seems no answers. We even completed rebuild OS and install again got the same error message. Very frustration! Realizing the installation has NOT even get to SAP part yet, but any of you see this kind error message when you install SQL Server? How do you fix it?
    Any helpful anwsers are appreciated and reward points.
    Thanks,
    Yujun Ran
    Edited by: Yujun Ran on Mar 18, 2008 3:53 PM

    Suhas,
    Not sure I understand what you are asking. But to answer your question, No, I did not install any software on my desktop. I am logon to the server remotely to install SQL Server 2000.
    Thanks,
    Yujun Ran

  • SCCM 2012 on SQL 2008 R2 cluster

    Looking Positive and negative for SCCM 2012 SQL cluster configuration. I am looking for configuration for sql 2008 cluster.
    can you any configured ? is yes please step by step configuration and preservative 

    positive: obviously, the SQL could have high availability and will auto fail over to another box if one of the boxes is down.
    Juke Chou
    TechNet Community Support

Maybe you are looking for

  • Function Modules for creation of characteristics and Measurement Points

    Hello everybody I'm new in ABAP (trainee) and especially the use of characteristics. I'd be very happy if somebody could help me :). Can anybody out there with some experience in creating characteristics and measurement points tell me how to create t

  • Error while creating datasource userdsn for oracle 10g Errorcode (998)

    while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

  • Batch processing images of various sizes

    I'm trying to create 125 pixel square thumbnail images using a batch process and I'm having trouble getting it to work consistently with images that have different aspect ratios. I think I know why it's working the way it is, but I don't know how to

  • Selctive Deletion of Production Data

    Hi, Is it possible to selectively delete the data from Solution Manager infocubes? (like systemwise, datewise ) we have a requirement from customer where they want the Production Solution data to be fresh from the day of Go Live. Whatever the data(EW

  • Adding a page to bookmarks, adding a page to bookmarks

    Am trying to find out how to simply add a page to bookmarks.  Sometimes pages get added automatically and I am not sure how!  I have only had my mac a few months so still learning.  Some good features and some frustrating ones.  Also how do I do a sc