Installa Oracle Database 10g in a Tests Server

Good Morning
I need help about as to Install Oracle10g Database, in a test server.I need Create a Database and later to Restore the last day Backup, in this Database. Please somebody help me
Regards
Kevin Koch

Step 1: Go to http://docs.oracle.com
Step 2: Download the installation document for your version.
10g is not a version it is a marketing label. 10.1.0.3 is not 10.2.0.4.
and you didn't think your operating system important enough to mention.
Step 3: Follow the installation steps in the document without deviation.
If you run into a problem ask a specific question and provide sufficient information so someone can help you rather than just giving you a generic answer (such as this).

Similar Messages

  • Weblogic 5.1 and Oracle Database 10g JDBC Drivers

    I need to know if there are JDBC drivers for Oracle Database 10g compatible with Weblogic Server 5.1.
    Regards,
    Luis

    Hi. You should be able to use any JDBC driver with WebLogic 5.1.
    It may be the JVM that complains, if you use too old a JVM...
    Joe Weinstein at BEA Systems

  • Web Server Options for APEX Installation on Oracle Database 10g

    Hi. We are installation a APEX on a test server that is running Oracle Database 10g 10.2.0.4.0. As I understand it there are two Web Server Options:
    1) Oracle HTTP Server (Apache)
    2) Oracle Application Express Listener
    Do both of these work for Oracle Database 10g 10.2.0.4.0? I thought I remember reading somewhere that only the Oracle Application Express Listener would only work with database version 11 or higher.

    Do both of these work for Oracle Database 10g 10.2.0.4.0?Yes.
    I thought I remember reading somewhere that only the Oracle Application Express Listener would only work with database version 11 or higher. No, that restriction (with the exception of 10g XE) applies to the third web server option which you haven't mentioned: Embedded PL/SQL Gateway (EPG), as discussed in your previous thread: +{thread:id=2201975}+
    System requirements for APEX Listener
    {forum:id=858} forum

  • Installation of Oracle Database 10g 10.2.0.3 on Windows 2003 Server

    Hi Guys,
    We have to install Oracle Database 10g 10.2.0.3 on Windows 2003.
    I read on net, metalink and OTN as well and it seems there is no single 10.2.0.3 setup available to do so.
    One has to upgrade from earlier version to 10.2.0.3.
    Is that so? Is this the only way?
    I mean if we want new and fresh 10.2.0.3 then don't we have installer for it?
    In this case we will have to install 10.1.0.2 and then upgrade? (we have 10.1.0.2 installable with us)
    And if at all that is the only path available then for 10.2.0.3 on Windows 32 bit - Patchset 5337014 i.e. p5337014_10203_WINNT.ZIP from metalink is the correct patch?
    Thanks in advance!
    Av.

    Hi guys,
    I donwloaded patchset - 5337014, and in its readme it is specified to download and install patch - 5601428.
    So I downloaded 5601428 and set ORACLE_HOME and then fired command -
    D:\oracle_pathces\5601428>optach apply
    and i got error saying -
    This Oracle Home does not have components/versions required by the patch.
    ERROR: OPatch failed during pre-reqs check.
    Following is the command and its output,
    D:\Oracle_Patches\5601428>opatch apply
    "set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
    "D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
    duct\10.1.0\db_1\OPatch\opatch.pl ..."
    OPatch Version 1.0.0.0.48
    Perl Version 5.006001
    Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
    Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
    Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
    b\win32\oraInstaller.dll
    Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
    Location of Oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
    1\oui
    Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
    This Oracle Home does not have components/versions required by the patch.
    ERROR: OPatch failed during pre-reqs check.
    D:\Oracle_Patches\5601428>
    Probably thought that following is the culprit -
    Location of Oracle Inventory Pointer = N/A
    so fired -
    D:\Oracle_Patches\5601428>optach lsinventroy
    gave following output -
    D:\Oracle_Patches\5601428>opatch lsinventory
    "set PERL5LIB=D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\lib"
    "D:\ORACLE\PRODUCT\10.1.0\DB_1\perl\5.6.1\bin\MSWin32-x86\perl.exe D:\oracle\pro
    duct\10.1.0\db_1\OPatch\opatch.pl ..."
    Using ORACLE_HOME/oui to look up oui libs...
    Oracle Home = D:\ORACLE\PRODUCT\10.1.0\DB_1
    Location of Oracle Inventory = D:\ORACLE\PRODUCT\10.1.0\DB_1\inventory
    Oracle Universal Installer shared library = D:\ORACLE\PRODUCT\10.1.0\DB_1\oui\li
    b\win32\oraInstaller.dll
    Path to Java = "D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe"
    Location of Oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\ORACLE\PRODUCT\10.1.0\DB_
    1\oui
    Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    ""D:\ORACLE\PRODUCT\10.1.0\DB_1\jdk\jre\bin\java.exe" -classpath "D:\oracle\prod
    uct\10.1.0\db_1\oui\jlib\OraInstaller.jar;D:\oracle\product\10.1.0\db_1\oui\jlib
    \srvm.jar;D:\oracle\product\10.1.0\db_1\OPatch\jlib\opatch.jar;D:\oracle\product
    \10.1.0\db_1\oui\jlib\xmlparserv2.jar;D:\oracle\product\10.1.0\db_1\oui\jlib\sha
    re.jar;." -Dopatch.retry=10 -Dopatch.delay=30 opatch/LsInventory "D:\oracle\pr
    oduct\10.1.0\db_1\oui" "d:\oracle\product\10.1.0\db_1" opatch.pl 1.0.0.0.48 FALS
    E"
    Retrieving inventory.
    There is no Interim Patch
    D:\oracle\product\10.1.0\db_1\OPatch\opatch.pl version: 1.0.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
    OPatch succeeded.
    So thought is my opatch the culprit? Its version as seen in above dump is - 1.0.0.0.48, so is that causing any problem? And if yes, then how to get it resolved?
    FYI: OS - Win2003, DB - 10.1.0.2.0
    Can any one help in this?
    Thanks!
    Av.

  • Unable to continue Oracle Database 10g R2 installation on IBM AIX 5.3L

    I am facing some difficulties in installing the above. My environment is as follows:
    Server is a IBM system P, OS is AIX 5.3L and oracle version is Oracle Database 10g R2 (10.2).
    I encounter my problem when asked to changed/edit the shell script when changing oracle users. I can't find the % vi .login file. And I'm not sure how to proceed.
    Please advice as to what needs to be done.
    Thank you

    i'm using bash shell.If you are using a bash shell then .bash_profile is used by default.
    It is located in user's home, if it does not exist then simply create it.
    can this file be edited after installation?Yes. And also you can set the enviroment temporary (just for current session)
    I just can't find the vi .login file."vi" is command (text editor very common in Unix and Unix like world)
    .login does not need to exist (see .bash_profile as above). Note .login is ignored by bash shell.

  • Oracle Database 10g Express Edition Beta 2 Installation

    Oracle Database 10g Express Edition Beta 2 Release for Microsoft Windows installation successful, no problems.

    Hi Rekha,
    The format mask 999G999G999G999G990D0000 is the format mask that I selected from the software itself. I also use this format mask for a single record update. If' s ok, no error, but with tabular form with multiple record update, it shows error .I also changed the decimal point to two digits ,select from software pop-up window (this was tested in the workspace provide by Oracle). It still shows error. Last test I put the space like 1 111,111.00 in a single record update it shows error (but if I put 1 in front of 111,111 without space it's ok-no space before). My point is from user point of view.In the first time user input 100000 the software accept it. Opp! it has to be 1100000. The user comes back after submit and put 1 without comma.It shows error (in tabular form with multiple record update not in single row update). While in the first time the user do not to key any comma at all. This may makes some confuses both the users and the developers which had to check error by adding program to checking some where in Page Processing or Page Rendering.
    Thanks
    Tritep

  • Companion CD installation - getting Oracle Database 10g installation

    Hi everyone,
    I want to install the Oracle Companion CD (to use HTTP server and HTMLDB) on Solaris with Oracle Database 10g. I downloaded the companion CD and when running the installer I am getting "Welcome to the Oracle Database 10g Installation". I have already installed the database so my question is why the installer is asking me to install another database ? The documentation is explaining that the user would have the choice to select an HTTP server installation.
    Best regards,
    Othman

    Get the companion CD from the same place as the database. Start at http://otn.oracle.com, click on Downloads, and to to the Database download
    Get the step by step instructions from the documentation. Start at http://tahiti.oracle.com, go to the database documentation for the version you are using, click on the Books tab, search for "Companion CD Installation Guide for [your operating system]" or "Companion CD Quick Installation Guide for [your operating system]" and follow the steps.
    I strongly encourage you to install ONLY the HTTP server from the companion CD, and to install it into a separate ORACLE_HOME.
    After that, I suggest you use APEX instead of HTMLDB (APEX is the next generation of HTMLDB and is MUCH better.) To get that going, start at http://www.oracle.com/technology/products/database/application_express/index.html and look at "Documentation and Tutorials" for the installlation guide.

  • Sun One App Server - Oracle Database 10g

    Hi to all:
    I�m developing a web application that uses an Oracle 10g database and a I want to use Sun One Application Server 7, the problem that I have is when I have been deployed the war file into the server and acces to my application, specifically when I try to acces a JSP that extracts data from database, I don't see anything of the information that I need, that's not the problem, the problem is that in the server console appear a message indicating that an SQLException occour and the message is "No suitable driver".
    I test my methods before deploy the war file and the connection and data extraction are correct, I don't know if the version of the JDBC driver for the connection to Oracle Database 10g is incompatible or if it's impossible to use Sun One App Server 7 with a connection with Oracle 10g.
    I tried with other web servers like Tomcat 5.0 and Sun Application Server 9 and the connection it's perfect.
    Could somebody give some ideas or orientation please?????, im student, all help will be appreciated, thanks!!!

    Rahul,
    Yes there is an Enterprise Edition in the works. It will address the load balancing and fail over needs for deployments. More details are available here: http://wwws.sun.com/software/products/appsrvr_ee/home_appsrvr_ee.html
    We will also be releasing more information in the October and November.
    Cheers,
    Stefan Bolka
    Product Line Manager
    Sun ONE Application Server Enterprise Edition

  • Oracle Database 10g relase 1 Installation Problem on RHEL 3 ES

    Dear all
    I'm trying to install oracle database 10g r1 X86_64 on Intel Xeon Machine with EM64T technology with RHEL 3 ES update 2 X86_64 edition. The problem is described below :
    Oracle OUI .runInstaller collapsed with such a following error:
    An unexpected exception has been detected in native code outside the
    VM.
    Unexpected Signal : 11 occurred at PC=0x8077470
    Function=[Unknown.]
    Library=(N/A)
    Is there anyone can help me ??

    Check pushitz website and ensure that you have all the required rpms installed properly.
    Check the log files in the installation directory. That should give some more details as to what exactly is going on.

  • Installation oracle database 10.2 on mac snow leopard server

    Hi.,
    I am trying to install oracle database 10.2 on mac server snow leopard but getting following error:
    rsgsoftware:Disk1 oracle$ ./runInstaller
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-08-31_10-22-39AM. Please wait ...The Java RunTime Environment was not found at /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/bin/java. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
    : No such file or directory
    hence JRE is inbuilt with mac.
    Can any one help me in this regard.
    --SD                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    damorgan wrote:
    I am trying to use my pet cat as a boat and it doesn't work either.That's because, just like the OP, you are not taking the right approach. You simply need to MODIFY the cat - in your case, by adding a few things: a keel, ribs, hull, mast, sails, rudder, tiller (to name a few).
    Similarly, OP needs to MODIFY Snow Leopard by adding the appropriate infrastructure, executables, and configuration to meet the install requirements. Just because that implies a different kernel and system libs doesn't mean it can't be done.
    Just don't let the animal rights people (or professional administrator) know about the mods.

  • Installation oracle database 10.2 on mac snow leopard server JAVA ERROR

    When I try install DB 10g in my Macbook Pro with Snow leopard show this error when I try the 'installer' :
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-18_08-45-47PM. Please wait ...The Java RunTime Environment was not found at /System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/bin/java. Hence, the Oracle Universal Installer cannot be run.
    Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
    : No such file or directory
    logout
    Please help me its urgent !
    Thanks
    Best Regards

    Welcome to the forums !
    For urgent issues, pl open a Service Request with Support at http://support.oracle.com
    The forums are a loose organization of unpaid volunteers and cannot support urgent issues ;-)
    AFAIK, Snow Leopard has not been certified for 10g yet.
    Pl confirm that you meet all of the requirements for the install - http://download.oracle.com/docs/cd/B19306_01/install.102/b25286/toc.htm
    See related thread Re: Install Oracle Database 10g on Mac OS X Snow Leopard
    HTH
    Srini

  • Doubt   regarding   Oracle Database 10g Release 2 (10.2.0.1.0) installation

    hello
    my pc has following configurtion
    256mb ram
    60gb hdd
    p4 2.4 ghz
    win xp pro sp2
    I want to know if my pc will be able to run " Oracle Database 10g Release 2 (10.2.0.1.0) " standard edition on it.
    <<http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html>>
    I thought of increasing RAM, but it is not feasible.
    I know i could run oracle XE, but can my pc also run the standard edition.
    I could not find minimum hardware requirements for standard edition on this site.
    anyway, i will use it for sql and and other advanced concepts in RDBMS which i may learn during my course in database. so i prefer standard edition instead of XE
    any help greatly appreciated
    thanks in advance

    I suggest you not to doubt   regarding   Oracle Database 10g Release 2 (10.2.0.1.0) installation.
    It is not necessary. If you don't receive an answer within a reasonable amount of time you could edit your thread with whatever ( a period is enough) to raise it to the top once again.
    It becomes difficult for us to track duplicated threads and unnecessarily duplicates efforts.
    ~ Madrid.

  • I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.

    I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
    But this massage pop up when I used my browser first time before start database.
    Actually when I clicks on yes to start database.
    The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
    * Microsoft Internet Explorer version 5.5, 6.0 or higher
    * Netscape Navigator version 7 and higher
    *Mozilla version 1.3.1 and higher
    Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
    Regards,
    D

    You can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
    IE for linux does not exist.

  • Oracle Database 10g(10.2.0.1.0) for Windows server 2008 SP1

    Hi,
    I would like to install Oracle database 10g on Windows server 2008 SP1. What is the supported version ?
    As I go through certification matrix on Oracle support, 10.2.0.5.0 is supported on Windows Server 2008, however I can I install it directly.
    Any help in this regard is highly appreciated.
    Thanks

    TheExplorer wrote:
    Thanks srini for your reply.
    Currently, we are running a lower version of database i.e 10.2.0.1.0 on windows server 2003. I need to migrate theses servers into virtual environment running Windows server 2008 64 bit.
    The document you referred applies to MS Windows 32 bit. However, I see that Oracle Database and Oracle Database Client 10g Release 2 (10.2.0.5) for Windows x64 are supported on Windows Server 2008 R2 x64.http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#CHDFHIEA
    From where, can we download the older versions of Oracle database as it is not available on OTN (The version of Oracle Database you are looking for is no longer available on OTN. Please visit any of the following links for current release information).
    Looking ahead for the right direction
    Thanks
    You have to open a service request at My Oracle Support.

  • Installation error - Oracle Database 10g Express Edition

    Hi - I've just tried to install Oracle Database 10g Express Edition from the Oracle website and I'm getting this error.
    Error 1327 Invalid Drive: I:\ . I've googled the error but can't find much. It seems that the path is hardcoded into the msi installation package.
    Anyone else seen this issue before as I'm at a loss at what to do ?
    I'm wondering do I have to create an I:\ drive on my machine but that seems a little unusual
    Hope someone can help
    Cheers.

    This problem may occur if you have used the Disk Administrator utility included in Microsoft Windows to change the drive letter of the hard disk that the operating system is installed on, for example, the C drive.
    The problem occurs because the Oracle Universal Installer uses registry keys to determine the locations of certain folders that are required to install Oracle. If the drive letter of the hard disk that contains the operating system has been changed, the registry keys refer to nonexistent folders and Setup fails.
    To correct this problem, use the Windows Disk Administrator program to restore the drive letter of the hard disk to its original value:
    1. Click Start, point to Programs, point to Administrative Tools, and click Disk Administrator.
    2. Right-click the drive whose letter you want to change. On the shortcut menu, click Assign Drive Letter.
    3. Select the correct drive letter from the list and click OK.
    If you are prompted to quit the Disk Administrator or to restart your computer, do so. Once the computer has restarted, attempt to install again.

Maybe you are looking for

  • Different Music on different devices

    I have both an iPad and an iPhone as well as a very large music collection.   Each of my Apple devices has different storage capacities.   I have already told iTunes that should only download selected songs to my Apple device.   Because of different

  • I have aproblem

    My 4 g network is not supporting let it I have a problem with communication, messages, what do I do please help

  • Oracle on same server with other DB

    I'm trying to find a technical reason why it isn't good to have Oracle installed on the same server with SQL Server or some other DB Product. I've seen lots of people say, "Don't do it.", but I haven't seen a technical reason. If someone could point

  • KitKat messed up my photo gallery

    Post-kitkat install on my Razr M, deleted images are "masking" more recent ones.  Images I know I deleted are showing up in the gallery.  When I click on them, they "disolve" while opening to reveal the new image beneath.  It would be a neat parlor t

  • Missing features in Camera Raw 8.1

    I have just purchased and installed Photoshop CC. It should come shipped with a fully loaded Camera Raw 8.1 but mine is missing the Advanced healing brush and Upright tool. Despite 3 hours on online chat and the telephone with Adobe support none of 3