Installables for 32 bit windows machines

Hello,
It seems SAP has stopped providing installables for 32 bit windows machines. IS it correct?
If yes which SAP versions can be installed on - Windows server 2003 SP2 (32 bit).
Can we have ECC6 EHP4 based on SQL database on it?
Thanks,
Ambarish

Hi,
If you read the installation guide then following thing is mentioned there:
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system. Therefore, you
only see the folder Software Life-Cycle Options on the Welcome screen when you start the
installation from a 32-bit installation master DVD.
You might need to install dialog instances on 32-bit operating systems if you want to
use 32-bit SAP NetWeaver components, such as Adobe document services. However,
first check whether such 32-bit components can run on 64-bit operating systems. If
so, we recommend running these 32-bit components on a 64-bit operating system.
Thanks
Sunny

Similar Messages

ITunes 64-bit installer for Acer windows 7

How to install iTunes 64-bit installer for Acer windows 7? I've been trying for many times but i still cant install it.

Hello Shemay7,
The article linked below provides some useful troubleshooting steps that can help you get iTunes installed on your computer.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Allen

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?

In addition to Niel's comments, if you plan to use Time Machine to backup a Mac to the secondary drive.....that application needs a drive that has been specifically formattted for Mac. That would be Mac OS Extended (Journaled).
PCs can also read and write to the Mac formatted drive.

Using Acrobat 8.2.5 on a 64-bit Windows machine

I own Adobe Acrobat 8.2.5 Standard that I have used on my old computer. However, it will not load into my new 64-bit computer. Is there a way to make this work short of purchasing a new program?

Hi alliembaker,
Copying information from this doc Support policy | Acrobat 8 | Windows
Adobe has tested Adobe Acrobat 8.x (Standard and Professional) on Microsoft Windows 64-bit operating systems running on a 64-bit processor machine. This document describes the known limitations and support options available to users of Adobe Acrobat 8.0 in a Windows XP or Windows Server 2003 64-bit environment.
Support policy for Adobe Acrobat in Microsoft Windows Vista x64, Windows XP x64 and Windows Server 2003 x64
Adobe Acrobat 8.0 was not developed for the Windows XP x64 or Windows 2003 Server x64 operating systems running on a 64-bit processor machine. Adobe Acrobat 8.0 was developed for Windows 2000 SP4, XP Professional, Home Edition, or Tablet PC Edition.
If you use Adobe Acrobat 8.0 in Windows Vista x64, Windows XP x64 or Windows Server 2003 x64, please update to Acrobat 8.1. The Acrobat 8.1 update provides support for x64 based operating systems.
The Acrobat update is available on the Adobe website at www.adobe.com/support/downloads/.

EHP Installer - 32 bit Windows systems

Is there an EHP installer for Netweaver Java installations (Windows 32 bit Microsoft SQL Server based)?
We can only find 64 bit installers in the service marketplace.

No. Enhancement packages have additional functions not included in the standard release.
Eventually you will need to migrate to 64 bit, so you may as well get the process underway now!

Database timeout issue in oracle 11g 64 bit windows machine

Hi ,
Database connection getting timedout for every 30 seconds in oracle 11g database 64 bit windows environment.
And the error we are getting is "Invalid user name and passoword".
After altering the schema passoword
alter username identified by pwd;
we are able to connect to database but it is getting timedout after 30 seconds.
Is there any parameter settings that requires changes or verifications.
We are facing this using sqlplus as well as through JDBC connection.
Thanks
Prasanna

Check profile assigned to user... there is a parameter idle_time.. increase this..

Can 32 bit OBIEE 11.1.1.5 be installed on a 64 bit windows machine?

We're having LOTS of problems getting the install of 64 bit 11.1.1.5 to work. Just as a curiosity - is it possible to install 32 bit OBIEE 11.1.1.5 on a 64 bit Windows 2008 server?
Thx,
Scott

Got you, and thanks for that clarification. You want the Premiere - Premiere Pro CS4 & Earlier Forum. Not sure of the answer, but someone there can help you.
Good luck,
Hunt
[Thread moved from Premiere Elements Forum]

Installing developer workplace on a 64-bit windows machine

Hi All
I've seen versions of this question asked in various forums before, but they were either unanswered or answered unsatisfactorily. I've recently acquired a new 64-bit hp laptop with 8 gigs of ram at considerable expense. It seemed silly to get a 32-bit system, this being the year 2009 and all. Besides, all that memory...
I was surprised to discover that the developer workplace (available as part of SAP Netweaver PI 7.1 EHP1 and SAP Netweaver CE 7.1 EHP1 install) would not install on my machine. I am running 64-bit Vista by the way. I could not wait for Windows 7, since my previous machine died and had to be replaced.
Now my question is: is there a way to get the developer workplace installed on a 64-bit OS like Vista and if so, how?
I've seen reference to a kernel patch in SAP Note 1040931 (NTCLUST.SAR) with regards to installing on Vista or Windows Server 2008, but I'm not sure how to use it, if it is applicable. The error I'm getting while running sapinst is:
Running msiexec failed with return code 1603: undefined
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
I cannot believe I am the only one running into this problem. Who wouldn't want to develop on such a machine??
Please comment.
Regards
Johan

Hi Johan,
I would recommend to run a virtual machine on your PC and install the Netweaver there.
I usally use VMWare Server with WindowsXP or SUSE there.
The advantange of this approach is that you can easily copy your installation later on and create sandboxes for any purpose.
Also you can easily move your Netweaver installation to other servers if necessary and you become independent of their host OS.
Just my 2 cents.
Cheers Frank

Oracle 9i and 11g installation on same windows machine

Hi All,
I am facing strange problem, I installed 9i and 11g on same machine whiche is runng windows server 2003 service pack 2. I set ORACLE_HOME and PATH of both versions different
and both are installed properly. But when i try to create new database using oracle 9i DBCA after reaching step 8 DBCA becomes unresponsive whereas i am able to create new database using Oracle 11g DBCA. After searhing the entier net i am not able to trubleshoot the problem.Moreover in both version i am able to access using CMD and i got the connectivity.
I configure the listener for both on different port but when i run oracle 9i the screen shows first connectivity of oracle 11g sql* plus after that it is going to connect to oracle 9i this is my second issue.
Please guys take this problem on high priority.
Thanks in advance.

Hi,
Welcome 2 Oracle Forums :)
Please guys take this problem on high priority.This forum is not for high priority issues. All high priority issues should log S.R at http://support.oracle.com
I am facing strange problem, I installed 9i and 11g on same machine whiche is runng windows server 2003 service pack 2. I set ORACLE_HOME and PATH of both versions different
and both are installed properly. But when i try to create new database using oracle 9i DBCA after reaching step 8 DBCA becomes unresponsive whereas i am able to create new database using >Oracle 11g DBCA. After searhing the entier net i am not able to trubleshoot the problem.Moreover in both version i am able to access using CMD and i got the connectivity.
I configure the listener for both on different port but when i run oracle 9i the screen shows first connectivity of oracle 11g sql* plus after that it is going to connect to oracle 9i this is my second issue.Check the Installation and Database creation logfile for more details.
thanks,
X A H E E R

BI 10g multiple installation on same windows machine

Hi All,
I have a requirement where in I want to install OBIEE 10g twice on the same windows server. Can we achieve this by installing it the second time as another OS User? What are the steps that we need to follow in this scenario?
Most importantly, Is this approach supported by Oracle?
Thank you so much,
Krishi

Hi Krishi,
Yes, I think we can install OBIEE 10g on the same windows box multiple times. However, there is some manual effort needed to change the port numbers of each NQServer, sawserver, javahost,oc4j instances to resolve port conflicts.
I do not remember oracle saying that this kind of design is not supported though.
Hope this helps.
Thank you,
Dhar

Best podcast software for a Windows machine?

I want to start getting KUOW's "The Works" and I could download it to iPodder, but I couldn't seem to move the feeds to my mini. I'm looking for basic, basic setup tips: any advice for a lame newbie to podcasting?

Welcome to the Apple Discussions, WinWimp!
Have you tried iTunes?
Go to the Podcast section of the Music Store, enter KUOW in the Podcast Search field and you'll be on your way.
Also, have a look at:
http://www.apple.com/podcasting/

Where is 64 bit installer for windows 8

Hi!. Does any anyone know where to get the ITunes 64 bit installer for windows 8? Thanks.

Hey...had same issue...have Windows 8 64 bit and just bought an iPod touch.
Had my new iPod connected to W8 laptop andwent toiTunes download page...which correctly detected I had a 64 bit Windows machine...but when the installer ranit gave me this error:
repeated trys gave me the same error...
Success by :
- disconnected iPod from laptop(may not be necessary)
- downloaded iTunes64Setup.exe to my download directory do not run it!
- now right click on iTunes64Setup.exe and select Run as Administrator ->
- hopefully this will work for you too.
Sod

INTERNET SALES B2B E-COMMERCE 5.0 FOR SAP on 32-Bit Windows

We are trying to install a central instance of the E-Commerce 5.0 for R/3 solution on a 32-bit Windows 2003 server, running on top of SQL 2005 32-bit Standard Edition. The Netweaver 7.0 Kit has an installation for IA-64 and X-64 but does not appear to have a 32-bit installation. Has anyone installed the E-Commerce 5.0 solution on a 32-bit Windows server? If so, on what DVD did you find the 32-bit Netweaver components for a centralized E-Commerce 5.0 installation?
Can someone also provide me with a link to the installation guide that explains what to install and how to install to a 32-bit Windows machine?
Kind regards,
Randy

Don't do it.
We upgraded from 4.0 to 5.0 and went live on 32 bit and performance was horrible. 12 users pounding on a test system was not enough of a stress test. When we had 100 prd users it was horrible and would crash the system. The IPC would crash. Had an emergency upgrade to 64 bit and life is much better.

Is the APEX 2.2 hosted on the oracle site only for windows machine

Hi,
Is the APEX 2.2 hosted on the oracle website only for the windows machine.
Can I download the APEX 2.2 s/w for a linux box as well. Kindly let me know
if a linux version is available anywhere else.
Thanks.

Hello,
ApEx is running inside the database, so there is only one version of it, which can be downloaded here - http://www.oracle.com/technology/products/database/application_express/download.html
The database itself can be run on Linux. You can see all the available versions in here - http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Regards,
Arie.

How to reference MS Access database in ColdFusion MX 7 on 64-bit Windows

I am migrating customers from:
Windows 2000 Server (fully patched)
Internet Information Services (IIS) 5
ColdFusion 5
to:
Windows Server 2003 Standard x64 Edition (fully patched)
Internet Information Services (IIS) 6 (running in 32-bit
mode)
ColdFusion MX 7 (7.0.2) Standard
Unfortunately, some of these existing customers are still
using Microsoft Access databases instead of SQL Server. Having all
of these existing customers migrate to SQL Server is not yet
practical. On the old Windows 2000 / ColdFusion 5 server, they are
using OLE DB data sources to reference the MS Access databases
using the "Microsoft.Jet.OLEDB.4.0" provider. None are configured
to use ODBC drivers when referencing MS Access or SQL Server.
I have yet to figure out how to get ColdFusion MX 7 to:
- Create a data source that references MS Access databases on
64-bit Windows.
- Reference an existing MS Access data source created with
the 32-bit version of the ODBC Data Source Manager on 64-bit
Windows.
A bit of background information regarding MS Access on 64-bit
Windows:
- At the time of this writing, Microsoft has not
created/released 64-bit drivers for Microsoft Access and it's
unlikely they ever will, for understandable reasons.
- Contrary to seemingly popular belief, the Microsoft Jet 4.0
Database Engine does exist on 64-bit Windows. See the following
regarding version and file location information:
How to obtain the latest service pack for the Microsoft Jet
4.0 Database Engine
http://support.microsoft.com/kb/239114
- You CAN create MS Access based data sources within 64-bit
Windows, but they have to be made using the 32-bit version of "ODBC
Data Source Manager". I'm assuming these DSNs may only be used by
32-bit applications, but I have not tested that theory.
32-bit data sources:
ODBC Data Source Manager:
%SystemRoot%\SysWOW64\odbcad32.exe
Registry location:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC
Default file DSN directory:
C:\Program Files (x86)\Common Files\ODBC\Data Sources
64-bit data sources:
ODBC Data Source Manager:
%SystemRoot%\system32\odbcad32.exe
Registry location:
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
Default file DSN directory:
C:\Program Files\Common Files\ODBC\Data Sources
The 64-bit version of "ODBC Data Source Manager" (under
Administrative Tools) only show "SQL Server" and/or "SQL Native
Client" as options when creating new data sources, unless
third-party software is installed that supplies additional drivers.
The 32-bit version of "ODBC Data Source Manager" (by default,
there is no shortcut for this in the Start menu) shows the typical
drivers seen on 32-bit versions of Windows, including SQL Server,
SQL Native Client, Microsoft Access, Excel, FoxPro, Paradox, etc.
When using ColdFusion Administrator in ColdFusion MX 7.0.2 in
64-bit Windows 2003 (IIS is running in 32-bit mode to allow
ColdFusion MX 7 to function at all), two problems are encountered
when dealing with MS Access (and presumably other 32-bit drivers).
In both cases, ColdFusion is trying to reference the registry
location for 64-bit data sources instead of 32-bit:
1. Creating a new data source within ColdFusion
Administrator:
Data Source Name: whatever
Driver: Microsoft Access
CF Data Source Name: whatever
Database file: (physical path to whatever.mdb)
(other settings are irrelvant for this example)
Error generated when submitting:
Unable to update the NT registry.
Cannot open HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC
Data Sources: Windows error number 5 occurred.Access is denied.
ColdFusion stores the data source, however a "verify"
generates the following error:
Connection verification failed for data source: whatever
java.sql.SQLException: [Macromedia][SequeLink JDBC
Driver][ODBC Socket]internal error: Data source name not found and
no default driver specified
The root cause was that: java.sql.SQLException:
[Macromedia][SequeLink JDBC Driver][ODBC Socket]internal error:
Data source name not found and no default driver specified
2. Creating the data source using the 32-bit version of "ODBC
Data Source Manager" then trying to reference it with ColdFusion:
ODBC Data Source Manager:
System DSN or File DSN:
Name: whatever
Driver: Microsoft Access Driver (.mdb)
Database: (physical path to whatever.mdb)
(creation is successful within ODBC Data Source Manager)
Reference the above DSN within ColdFusion Administrator:
Data Source Name: whatever
Driver: ODBC Socket
Error generated when submitting:
Error accessing available odbc datasources. - Cannot open
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC Data Sources:
Windows error 2 occurred.The system cannot find the file specified.
ColdFusion MX 7 can't find the 32-bit data source on 64-bit
Windows because it's looking for it in the wrong registry location.
Can ColdFusion MX 7 be configured to look in
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC
instead of
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC
on a 64-bit Windows machine?

Paul,
Thanks for the insight on this. Regarding the initial problem
I ran into with creating Access based DSNs, very early-on, I
noticed there were two different driver options for Access
displayed within ColdFusion MX 7 Administrator:
Microsoft Access
Microsoft Access with Unicode
For reasons I'm am still baffled over, I somehow completely
forgot about and through the wonders of apparent tunnel vision,
completely overlooked the "Microsoft Access with Unicode" driver
option when I was running through my tests.
At your seemingly-obvious suggestion, I created a data source
using the Microsoft Access with Unicode driver and it worked
perfectly fine with the one customer's web site I'm using for
testing (of course, this is a copy--the production site is still
housed on the old ColdFusion 5 server). This obviously doesn't
actually fix the underlying issue with ColdFusion looking in the
wrong part of the registry on 64-bit Windows, but at least when it
comes to dealing with Access databases, your suggestion of using
the Microsoft Access with Unicode driver appears to be a functional
work-around. So long as there aren't any surprises waiting for me,
hopefully this will also work for the remaining ColdFusion sites I
have to migrate that are using Access databases.
Since you mentioned JDBC drivers in comparison with ODBC, I'm
pointing out a couple of references in case they're helpful to
anyone following this thread:
ColdFusion MX 7 - About JDBC
http://livedocs.adobe.com/coldfusion/7/htmldocs/00001736.htm
Types of JDBC technology drivers
http://java.sun.com/products/jdbc/driverdesc.html
http://java.sun.com/products/jdbc/
I don't actually develop anything in ColdFusion, so I'm
dealing with all of this from a server administration standpoint
since we do have some domain hosting customers that do develop or
at least have existing ColdFusion based sites. I am all
too-familiar with the caveats of using Access in any kind of
production or heavily used environment and have spent years keeping
users away from ODBC. For ColdFusion users, that meant creating OLE
DB DSNs and often having to fix poorly written SQL statements and
fixing ColdFusion date-related values and boolean values (the
common problems encountered when switching CF / MS Access users
from ODBC to OLE DB). I can only recall running into problems with
a single SQL Server based ColdFusion site when migrating from ODBC
to OLE DB. That customer never did get their many coding problems
fixed, so they're the only ones still using ODBC in CF. I have no
idea what'll happen when that one site gets migrated over--if it'll
even work. Obviously a lot of things have changed between
ColdFusion 5 and the MX versions that have come along afterward.
Thanks again for the Access with Unicode driver tip and JDBC
info. It looks like I can finally start moving forward again with
the site migration process.
Josh

Installables for 32 bit windows machines

Similar Messages

Maybe you are looking for