Installation Biztalk Server 2013 and SQL on different machines

I want to know if I can install a Biztalk server 2013 and SQL on different machines?

BizTalk Server 2103 and SQL Server (SQL Server
2012 or SQL Server 2008 R2 SP1) can be installed and configured on different machines.
For more instruction about this installation, refer to following MSDN installation guide for BizTalk :
Installation Guides Related to BizTalk Server 2013 and 2013 R2
from the above list download -
"Installing BizTalk Server 2013 and BAM in a Multi-Computer Environment.docx" document for your requirement.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

  • Installing BAM with Biztalk Server 2013 and SQL server 2012

    Hello All,
    I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
    Will I needs to explicitly install that ? from where I can get the installer for BAM ?
    What else I will needs to work on BAM ?
    Note : I want to handle Exceptions in BAM ....how to do that ?
    Thanks,
    Nitin.
    Thanks and Regards, Nilesh Thakur.

    Hi,
    BAM is available with BizTalk, all you need is to select it and install .
    Refer the
    Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
    Maheshkumar S Tiwari|User
    Page|Blog|BizTalk
    Server : Scheduling Orchestration using Trigger Message

  • BizTalk Server 2013 and deployment MSI with dynamic send ports

    Hello community, wonder if any help out there for this odd problem.
    Deployment of application msi fails into BizTalk 2013 prod environment, fails when deploying the project dll that contains all the orchestrations,
    and reports a failure to apply early bindings.  The only early bindings in this project are dynamic send ports.  I cannot recreate the problem in in my QAS environment where deployments of the same msi works fine.  
    I can build an msi without any bindings at all except for the dynamically created ones, and this also display the same behaviour on import.  
    I have test deployed a 2nd unrelated app that also uses dynamic send ports, and this displays the problem.  
    Adding the assembly directly to BizTalk console displays the same behaviour.
    Deployment of msi apps without dynamic send ports are ok.
    The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
    C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
    No specific further detail is available in the error except.
    Import Wizard[09/05/2014 08:20:47]: Error in Importing Application
    Import Wizard[09/05/2014 08:20:47]: Change requests failed for some resources.
    BizTalkAssemblyResourceManager failed to complete end type change request.
    Unable to deploy early bindings.
    Failed to update binding information.
    Error in the application.
    Other information that may be relevant:
    The main difference between QAS and PROD is that PROD is a two node cluster.  Import behaviour is the same if attempted on either node.  Assemblies are installed in both nodes currently.
    The dynamic ports are set on handlers that are non-clustered hosts (all are for adapter type SMTP).
    I have ensured that all the adapter handlers are identically setup in both environments.
    The project files were migrated to BizTalk 2013 from BizTalk 2010, imported and then converted using VS 2012.
    The msi has installed the assemblies as per usual and they do exist in the .net 4 gac
    There is a reference to a shared resource in a different application, this application is installed and imported ok.
    I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something that VS2012 didn’t handle too gracefully
    when converting the project.  I could move the functionality into a helper class and forget about using dynamic sends, rather not go down that route.  I'm still suspecting this is small difference in setup
    of the group between QAS and PROD but I can't see anything jumping out.
    Any comments are most welcome.

    The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
    C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
    I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something
    that VS2012 didn’t handle too gracefully when converting the project. 
    Two things.
    1. That's what I would do first, recreate (really just change and reset the properties) the Orchestration Ports in Visual Studio.
    2. Probably not related but, Custom Pipeline Components should not be placed in the Pipeline Components folder.  All Custom Pipeline Components should be in the GAC only.  The Pipeline Components folder
    is a compatibility vestige from BizTalk Server 2004.

  • Looking for microsoft press book on C# programming for Biztalk server 2013 and also one for WWF 4.5

    Is there any microsoft pressbook available for Biztalk server 2013?
    Also is there one for WWF 4.5.
    Please send me the URL where I can view the book contwnta nad buy.
    Rajesh S Harwani

    The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
    C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
    I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something
    that VS2012 didn’t handle too gracefully when converting the project. 
    Two things.
    1. That's what I would do first, recreate (really just change and reset the properties) the Orchestration Ports in Visual Studio.
    2. Probably not related but, Custom Pipeline Components should not be placed in the Pipeline Components folder.  All Custom Pipeline Components should be in the GAC only.  The Pipeline Components folder
    is a compatibility vestige from BizTalk Server 2004.

  • "Windows Authentication Mode" when SQL Server 200 and CF on different machines?

    Hi All,
    I am playing for two days with following problem. And still I
    did not able to get rid of it.
    I have installed SQL Server 2000 on machine which is my
    server (windows 2003 server) and this machine is my domain
    controller. I have user “ABC” user and I have added
    this user in administrator group.
    I have another machine where OS is Windows XP and CF 7 is
    installed. I create an ODBC Connection from Administrative Tool to
    my Database (windows 2003 server) successfully.
    Now when I create Data Socket in Coldfusion Administrator and
    when I select the my ODBC that I had created and when I Submit it
    then CF admin throughs the following message.
    Connection verification failed for data source: myTest
    java.sql.SQLException: [Macromedia][SequeLink JDBC
    Driver][ODBC Socket][Microsoft][ODBC SQL Server Driver][SQL
    Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
    Please Brother, I don’t have any Clue to solve it,
    Please help.
    One Important thing, All this working fine if my CF, and SQL
    Server are on same machine.
    Best regards,
    Shahid

    Hi Phil Thanks,
    Finally i able to configure it out..... following are the
    steps...
    I assume domain controller is properly configure.
    Following are the steps for the machine where SQL SERVER 2000
    is installed
    1- We need to create Login account for your domain account in
    SQL Server 2000 using Enterprise Manager.
    • Right Click -> New Login
    • Click to load the domain users, select any user from
    your domain that will connect to your SQL Server from LAN.
    Following are the steps for the machine where ColdFusion and
    IIS are installed.
    Step No. 1
    Stop ColdFusion MX.
    Backup your existing macromedia_drivers.jar file.
    Unzip macromedia_drivers.zip into the same directory,
    overwriting the previous
    macromedia_drivers.jar.
    You can download “macromedia_drivers.zip” from
    following URL
    http://kb.adobe.com/support/coldfusion/ts/documents/1a3c2ad0/macromedia_drivers.zip
    A new file, DDJDBCAuth03.dll, which is required for Windows
    Authentication, is also included in the zip file replacing the
    older DDJDBCAuth.DLL.
    Restart ColdFusion MX.
    ColdFusion MX loads the JDBC drivers inmacromedia_drivers.jar
    in the directory cf_root/lib. For example, with ColdFusion MX 7
    Server Configuration on Windows installed on drive C:, this would
    beC:\CFusionMX7\lib\macromedia_drivers.jar.
    Then restart Machine
    Step No. 2
    Configure all the ColdFusion Services to “Log On
    As” using the Domain User Account configured in SQL Server in
    the above mentioned step.
    Change the “Log On As” similar for the all other
    Cold fusion services (ColdFusion MX 7 ODBC Agent, ColdFusion MX 7
    ODBC Server, ColdFusion MX 7 Search Server).
    Step No. 3
    Restart the services; for the safe side reboot the system.
    Step No. 4
    Create ODBC (Control Panel -> Administrative Tool ->
    Data Sources (ODBC)) using the windows NT Authentication option to
    connect to database.
    Step No. 5
    Create Data Socket and Select the created ODBC connection in
    the Drop down (ColdFusion-> Admin)
    Thanks to all who participated in this discussion...
    With lots of Thanks to All particular to Phil who guided me
    in right direction,
    Shahid

  • BAM Portal configuration error in BizTalk Server 2013 R2

    I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
    give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
    to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!

    " I need to know what the experts need to see in order to give me an answer."
    Experts needs:
    1) Little background of the issue you are facing.
    2) The log file generated.
    3) The configuration of your server.
    "now I have enough evidence to go back to our project manager and explain why you do not install every
    feature on a server."
    Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
    only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
    Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
    Review the Hardware
    and Software Requirements for BizTalk Server 2013 and 2013 R2.
    Understand the Considerations
    Before Installing BizTalk Server 2013 and 2013 R2.
    Prepare Your Computer for Installation.
    Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
    Planning for the BAM Portal
    I would advice you to refer this post by Sandro . BAM Portal configuration error
    Rachit

  • BAM Activity and view issue on BizTalk server 2013 R2 machine.

    Hello all,
    I am trying to make BAM portal work since couple of days but no luck yet...
    I ma using BizTalk server 2013 R2.
    I am trying to deploy the activity and view from my Development server to Test server ( it's working fine on Developemnt).
    I have gone through one post and found this and followed steps here is the output for that :
    First confirm that you can see the name of the activity in the list of deployed activity by executing this command:
    bm.exe get-activities
    --> I can see the activity name in  there so I belive that activity is got created.
    While creating the BAM activity you must have created/deployed a view get the name of the view by using this command:
    bm.exe get-views -Activity:<activity name>
    --> I can see the view name in  there so I belive that view is exist.
    You need to provide permission to the account you are using to access the BAM portal on this view by using this command.
    bm.exe add-account -AccountName:”<AccountName>” -View:<viewname>
    --> while executing this command is got error as :
    Using 'BAMPrimaryImport' BAM Primary Import database on server 'TESTSERVER'...
    ERROR: Security management of the BAM view failed.
    The SQL role for the specified view is missing.
    Note : My BAMAlert service is running and running using
    GROUP\~biztalkservice account I am logged on Test Server using "NitinUser" account with administrator rights.
    What does this mean - if this mean that I needs to give rights to my user (NitinUser) on SQL Database please tell me how to do that ? with command....
    Thanks and Regards, Nitin.

    Hi Nitin,
    Can you try the solution as suggested by Thiago Almeida.
    http://connectedthoughts.wordpress.com/2008/06/16/bam-deployment-gotchas/
    His solution for this problem is to remove the view and re-add it, which worked for him. Obviously I didn't encounter this error, so have to suggest the solution from community.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
    Hello Ashwin,
    As per that post the author was having issue that view was not created ...
    also have noticed one thing that by executing following command in sql management studio.
    use
    BamPrimaryImport
    SELECT
    SUSER_SNAME(owner_sid),nameFROMsys.DATABASES
    on my development box it's showing my user GROUP\nitinUser and Name = CustomBizTalkDB
    but when I execute this on TEST server, entry for GROUP\nitinUser is not in database
    Thanks and Regards, Nitin.

  • SharePoint 2013 and SQL Server AlwaysOn - HA

    Hi guys,
    Please help!
    I need to setup SP13 server on SQL 2012 AlwaysOn (on sql01 and sql02). The HA AlwaysOn group already configured by DB team on these 2 replica with and called SP_AOAG  alias
    My question is can I use this alias to setup SharePoint  or I need to configure the HA AlwaysOn group for SgharePoint  as suggested in the article below:
    http://blogs.msdn.com/b/sambetts/archive/2013/04/24/sharepoint-2013-and-sql-server-alwayson-high-availability-sharepoint.aspx
    Any advice greatly appreciated . 
    BalaiP

    You do not want to use a SQL Alias with an AG Listener. Just point SharePoint straight at the AG Listener. You will need to manually add any accounts to non-primary instances. You do not need to add them to individual databases, of course. You will also
    need to manually set MAXDOP to 1 on non-primary instances.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

    i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

    Please follow below technet article :
    http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
    Installing and Configuring Workflow Manager 1.0 (Step by Step)
    Note: The steps in this article apply to SharePoint Server 2013.
    The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • Upgrade DTSX packages from VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014

    Hello everyone,
    I’m very new to SSIS world. I’ve been assigned a task to upgrade the existing packages running in VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014. And then submit the migration report to my client.
    On very quick search at Google, I've found the following link. It seems like I just need to open the existing SSIS project in VS 2013 and follow the wizard.
    https://msdn.microsoft.com/en-us/library/cc280547.aspx
    Can anybody please advise, are there any other things need to be taken care while doing this up gradation process?
    Please share your experience.
    Any help would be much appreciated.
    Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

    Hello Arthur,
    Thank you for the response.
    I just got an access of the packages. They are of VS 2008 and not 2010.
    Do you know how to upgrade VS 2008 packaged to VS 2013?
    When I tried to open the solution file in VS 2013, it says "incompatible".
    Any help would be much appreciated.
    Thanks,
    Ankit
    Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com

  • Which Laptop is good for VS 2012/2013 and SQL SERVER 2008 R2 /2012 ?

    Hi,
    I am planing to buy a laptop.
    I am gonna be using mostly for Visual sStudio 2013 and Sql Server 2012 .
    my budget is $1000.
    confuse between DELL/ HP / LENOVO..!!!
    please help.

    This is only a personal taste of mine:
    I prefer to work in Virtual Machines. In fact I did set up a VM just for my programming. This has the advantage that games and other stuff are not slowed down by SQL Server Services and similiar stuff.
    This also allows me to quickly make a small virtual networks with multiple clients if I need to test some client/server stuff.
    Plus I am also a bit of an adminstrator and prefer to test stuff in VM's before I try them in the real world.
    I prefer using Virtual Box for Virtual Machines, so one thing of big importance was support for VT-X/AMD-V. Without them Virtual Box cannot run x64 guests even on a x64 host system.
    Otherwise I wanted Windows 8 (so I could finally learn to live with it/learn programming for it's UI). And of big importance was an upgrade of gaming ability (my old one had difficulty/impossibility to run most current games).
    So I bought a x64, Win8 Gaming Laptop with 8 GiB RAM (so I can run 3-6 Windows 7 hosts in paralell) and looked that the CPU supported Hardware Virtualsiation.
    Otherwise pretty much every current laptop will work. x64 OS might be prefereable, as .NET has some limitations under x32/x86 OS (like the
    2 GiB limit). Multicore (2 or more) is pretty much the state of the art (are there still any single core CPU's out there?).
    It of course needs to be a Windows (7 or 8) to support VS. New Laptops should have UEFI (all that are sold with Windows 8 have).
    If you do not need a lot of storage, using a SSD instead of a HDD will propably speed up startups (Windows, Programms) and compilation times a lot (those are disk-heavy operations) - but I only know that it should and heard of people who have them.
    Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

  • SQL server 2014 and Sql 2012 installation on VMWare machine

    Hi ,
    Please let me know Can we Install SQL Server 2014 RTM version and SQL Server 2012 SP1 On Vmare machine version 9.
    Does it Supports on VMware 9 . If yes please give me the links .
    Thanks a lot

    Hello,
    You can find that on VMware Web site for their high end products only as you can see in the following URL. For VMware
    9 you won't find it.
    http://www.vmware.com/resources/compatibility/sim/interop_matrix.php
    VMware 9 is a PC product that basically allows to install any product that works on Windows 8 and Windows Server 2012 or earlier. VMware 9 introduces support for Windows 8 and Windows 2012.
    So, SQL Server 2012 and SQL Server 2012 should install on Windows 8/Windows 2012 RTM with no issues on a VMware 9 virtual machine. Earlier operating systems may require installation of service packs and updates as explained on the following URLs.
    https://msdn.microsoft.com/en-us/library/ms143506(v=sql.120).aspx
    https://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Lync 2013 and SQL 2012 on the same server

    Hi,
    I'm in the process of migrating Lync 2010 to Lync 2013.  I have a clean install of Windows Server 2012 R2.  Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
    Thanks
    P

    Configure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
    Also you can refer below link
    http://technet.microsoft.com/en-us/library/gg425848.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Migrating From BizTalk 2009 To Biztalk server 2013

    Hi All,
            My current solution is on BizTalk 2009 and my client is thinking of migrating to BizTalk 2013 . Please suggest me is it a good idea to migrate to BizTalk 2013.
    Please provide me a difference between 2009 to 2013
    Difference between 2009 to 2013 and main features.
    Thanks and Regards
    Dhanavel S 

    Hi Dhanavel,
    Why don’t you think about migrating to BizTalk 2013 R2 which is available now. Anyway
    First and foremost thing, BizTalk Server 2009’s mainstream support from Microsoft has ended on 08-July-2014. After mainstream support, customer will get extended support until
    09-July-2019. So you're are in extended support phase now. Find out the following blogpost where you will know more about what you can get and what you’re going to miss from Microsoft support for BizTalk Server 2009. And also about what you have to do next.
    Why you have to migrate to the latest version.
    BizTalk Server 2009 mainstream support ends.What to do next?
    Apart from losing the benefits of mainstream support against the extended support and apart from getting the benefits of latest offering/features of the newer version of the
    product, BizTalk server 2009 is closely dependent on its underlying platforms like Windows Server 2008 (or Window server 2003/Windows XP-SP3/Windows Visa SP1), SQL Server 2008 (or SQL Server 2005 SP2) and Visual Studio 2008. So its high time to migrate.
    BizTalk Server 2009 mainstream support ends. What to do next?
    Some of the benefits of migrating from BizTalk 2009 to BizTalk 2013.
    Platform upgrades:
    BizTalk 2013 uses following, so when you upgrade from BizTalk 2009 to 2013, you will get the benefits by upgrading your platforms.
    Windows Server 2012 (BizTalk 2009 uses Windows Server 2009)
    Visual Studio 2012(BizTalk 2009 uses Visual Studio2008)
    .NET Framework 4.5 (BizTalk 2009 uses .NET 3.5)
    SQL Server 2012(BizTalk 2009 uses SQL 2008)
    Virtualization support for Hyper-V (this feature is available from BizTalk 2010 onwards)
    Some of the other benefits include
    Better support to could
    Azure Service Bus. And support for
    BizTalk Server running on Azure IaaS
    BizTalk Server 2013 Support for RESTful Services
    More support towards WCF-based adpaters.
    Secure FTP with new FTPS Adapter and an improved FTP Adapter
    Out-of-box support to SFTP Adapter
    Enhancements to the IBM Hosts Systems adapters
    Update to BizTalk mapper
    Updated Trading Partner Management (TPM) Capabilities.
    Updates to industry schemas like HIPPA, HL7, SWIFT and SWIFTNet
    Seamless ability to leverage BizTalk capabilities from SharePoint 2010 Business Connectivity Service to Line-of-Business systems
    BizTalk Server setting dashboard for setting to
    configuring the key performance, throttling, and tracking settings of your entire BizTalk group while offering fine grained control all the way down to the Host
    Instance level.
    ESB toolkit part of BizTalk installation.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • How to apply hotfix 3000847 to Windows Server 2012 & BizTalk Server 2013 R2

    Hi
    I have a environment get the same issue as:
    http://support.microsoft.com/en-us/kb/3000847. But this hotfix can't be used in my environment.
    The environment information:
    We are using Windows Server 2012 Standard, BizTalk Server 2013 R2 Enterprise Edition. And the Version of Microsoft Enterprise Single Sign-On is 9.0.2096. It's the same as the article.
    Here is the article content:
    Prerequisites
    To apply this hotfix, you must have Enterprise Single Sign-On V5 (9.0.2096) installed.
    Best regards,
    Glen Qu (Fareast\v-zuqu)

    Have you tried installing it? Are you getting any error?
    Ideally you should not face any issue while installing this hotfix.
    Pre-requisites-
    1) User account should be member BizTalk Server Administrators Group and have SydAdmin privileges on SQL Server
    2) Stop all the host instances
    3) Stop SQL Agent
    4)  Stop App Pools if any webservices is posting messages in BizTalk
    Please refer the below article Information about BizTalk hotfixes and Cumulative Update support(Uninstall and rollback if required).
    http://support.microsoft.com/kb/2003907
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

Maybe you are looking for

  • Error creating instances in Business Process Workspace

    i have the following error: oracle.bpm.web.exception.WapiOperationException: Error creating instance for target process Serv_M/Proj_V!76.0*/EV. Caused by: BPM-70204 Exception exception.70204.type: error exception.70204.severity: 2 exception.70204.nam

  • Trapping AF errors using Alert framework in XI 3.0 SP13

    Hi    I am trying to setup alert categories and rules to trap AF related errors - like a SOAP receiver adapter failing to call a webservice etc... I came across earlier threads that mentioned, alerts will not be triggered involving AF in SP13 - in ot

  • What's the best approach to resetting Calendar data on Server?

    I have a database format error in a calendar that I only noticed after the migration to Server on Yosemite.  I'll paste a snippet from the Error Log in at the bottom that shows the error - I've highlighted the description of the problem in red. I fou

  • What is the 2.0 version number if downloaded directly from iTunes?

    If you are one of the lucky ones to get the download from iTunes, can you please tell me what the version number is? Just fire up your phone and go to settings/about. Scroll down and you will see Version 2.0 (xxxxx). I am one of those that probably v

  • Digital Mixing board recommendations?

    I've had Logic Express 7 for about a year. I've been using my 4-track as a mixing board up till this point. My 4-track just got stolen so I want to replace it with a digital board that I can use to record multiple tracks independently and then mix th