Installation /Download of xMII 11.5 from SMP
Dear all,
We want to install xMII 11.5 (as 12.0 will be available after Sept.2007).
We want to install demo version with apprppriate license obligations .
May I request to help on following ?
1. On SMP SAP site, where I can look for xMII 11.5 download ?
2. If download is not possible , to whom in SAP India's office, we can contact, to get CD for xMII 11.5 alongwith mandatory lincense obligations ?
With best regards.
Datta
Message was edited by:
Dattasaheb Kadam
Message was edited by:
Dattasaheb Kadam
You should be able to use a "super-user" account to login into SMP.
Once you're there just look for the software download link which should be somewhere near the top of the page under the SAP Support Portal heading.
Follow the navigation tree on the left until you get the option to Search for Installations and Upgrades. Just enter SAP xMII into the search field and you should get the link for the download.
As for who to contact for info on downloading, i doubt anyone can answer that for you here. This is a public forums and personal contact details are not a common practice to be posted. You should have a contact, a sales person, etc. from SAP that could help you with this.
Hope this helps!
Similar Messages
-
I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.
Hold down the option key and select
▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown? -
I have an installation CD Adobe Acrobat 9 Pro with teh Serial No/key. Now I bought a tablet that has now CD drive. So I tried to download the Acrobat 9 Pro from the Adobe hoempage, but failed. I can only find the link to something like an extended version. So how do I have to proceed , where can I find the proper link. My system has W 8.1 32 Bit.
Try the download below...
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html -
Installation advice for xMII V12.0
Hi all,
xMII is my first foray into the SAP experience. We are planning a POC using xMII to build a simple MES system with communication to existing SAP ECC/ERP, various PLCs and Proficy iHistorian and printing to Zebra label printers. We have a sandbox xMII V11.5 installed and working with ECC via RFCs/JCO.
It makes sense to use xMII V12 for the POC as we will not be going live for a year and the work we are doing now is discovery work. We are planning a new installation as the requirement for NetWeaver changes requirements quite dramatically.
I have been looking through the mountain of documents on Wikis, document sites, and Blogs and have found Master guides, Installation Guides, Upgrade Guides, Release Notes, Config Guides, SAP Notes... Then there is JCO, SAP JRA, UDSs of various types, Netweaver (UME, WebAS, CCMS, ...), JRE, database, Windows... I am attempting to make a list of what needs to be installed and in what order for the POC. I have not found a definitive source of information on the installation of an xMII server. -Does one exist?-
Here is my current list of what to install on the xMII server, in the order they must be installed. I could use some feedback!
The server: Dell Optiplex GX620 - 1G RAM - 2.8Ghz - 40Gb HD -Is this adequate? More RAM? More Disk?-
Windows Server 2003
MS SQL Server 2005
Sun JRE 1.4.2_16 (When will this be upgraded to 1.6, or even 1.5!)
Is JAVA_HOME required? Does it matter which JRE is in the Windows PATH environment variable?
SAPCAR 7.0
NetWeaver 7.0 (2004s) SR2 Usage Selection - Application Server Java - and configure JRA
xMII V12.0 SR3 - and configure users
XMII 12.0 Migration Tool SP02 XMIIMIGRATION02_0-10004466.SCA
JCOlibs for XMII 12.0 JCOLIBS00_0-10004406.SAR
XMII Framework UDS SP00 XMIIFRAMEWORK_0-20001475.zip
XMII OPC UDS SP00 XMIIOPCUDS_0-10005336.ZIP
XMII OPC HDA UDS SP00 XMIIOPCHDAUDS_0-10005335.ZIP
XMII iHistorian3 UDS SP00 XMIIIHISTORIAN3_0-20001465.zip
Label printing - TBD
What did I miss? Is everything in the correct order?
Thanks all,
--Amy Smith
P.S. I have been impressed by the quality of the posts on this forum. I look forward to joining the community!Amy,
This is probably not what you want to hear but the guide will most likely not be updated since the JDBC driver and it's configuration is specific to the vendor and not SAP. This is the reason for all of the various configuration fields you see in the xMII Data Server configuration screen. It allows the xMII system to support a connection via any JDBC driver. The MS site where you downloaded the 2005 driver from has the Server URL defined there and there are plenty of supplementary sites on configuring the URL properly for your system. If you still think it should be added then please create a CSN/CSS message requesting the change.
To cover some previous comments on the NW installation, plan for approx 2-4 days in installing and configuring Solution Manager; if you don't already have it in your corporate landscape. The actual installation took me 20hrs on a 2GB RAM Dual-DualCore 2 GHz CPU machine and took approx 45 GBs of space (This is now required by SAP and last I checked was free). You'll need this because it will help you maintain/manage your various systems corporate wide. Also it is needed to generate "Solution Manager Keys" which are required for NW installations and to download NW support package updates from Service Marketplace.
Once that's done it's about 3 hours for each successive NW AS Java installation and about 5 minutes for the xMII v12 deployment and finished off at around 5GBs of space.
This is all in the guide I am putting together along with a "High-Availability" section which is adding some extra time to it's release but I can guarantee it's worth the wait!
It's nice to see that you've done your homework on this, hope this helps to explain and clarify...
Sam -
I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help
There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
Problem:
You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
You get a couple of error messages, which you click through.
You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
Solution:
BEFORE you restart, and with the installer package still open -
1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
Applications : Canon Utilities
Applications : Canoscan Toolbox
and remove the prefix Into_ from each folder
2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
Library : CFMSupport
and if it didn't, move it there yourself
THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know. -
I have a PowerBook 145B but something is wrong with the systemfolder so it wont boot. I've downloaded System 7.0.1 from Apple and put it on Floppys with my Macintosh Classic. The PowerBook boots from the floppy but after a minute it just comes up a window thats completely white.
I've tried a lot of things, but my Macintosh classic (with original floppys) runs 7.0.0. And the PowerBook needs atleast 7.0.1 and did run 7.1.0 as original OS.
How do I fix this?Because your PowerBook 145B shipped with OS 7.1, it can't run an earlier version of the Mac OS, such as 7.0.1. Unfortunately, Apple never made OS 7.1 available for download. You can run OS 7.5.1, 7.5.3, and 7.5.5 on your PowerBook, but I'd recommend doing so with the maximum amount of supported memory - 8 MBs. The 19-part download of OS 7.5.3 is segmented, so that each one will fit on a 1.44 MB floppy disk. The problem is that the 19-diskette set isn't an installer set as such, having no bootable disk. It's solely intended to be used to transfer the individual segments to the resident hard drive in the computer. Once that's done, double-clicking the first .smi segment creates the OS 7.5.3 installer disk image on the desktop, which you drag onto the hard drive icon. This produces a folder with the OS 7.5.3 installer in it. I've done this before with an old Mac LC and it works. You can also download the 3-diskette OS 7.5.5 Update and run that. These downloads can be found on the same page where you found the OS 7.0.1 download: Older Software Downloads.
-
I have downloaded OS X Mountain Lion from the App Store. It took two hours to download but now its not running and I have no idea how to make it run!
Download was complete and I accepted everything and restarted computer but its still running 10.7.5
Any idea how to get OS X Mountain Lion to run?What you donwloaded was the OS installer. You still have to do the installation.
To get started, double click on the download, then double click again and follow instructions. -
I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing. After letting it run for 3-4 minutes I kill the task. What can I do to get the reader installed on this machine? I've tried using chrome, firefox and explorer and get the same results with each.
Try the offline installer from http://get.adobe.com/reader/enterprise/
-
I still have my serial number but no software can I download my version of InDesign from your servers.
You can find links to the installers at the bottom of this page: Download and Installation Help
-
I am trying to download cs6 with web prem from my old dead computer to my new one.
i am trying to download cs6 with web prem from my old dead computer to my new one but a down load promt isnt appearing. the info is still in the my products tab. how do i get a human to help me
If you mean you are trying to transfer the programs from one machine to another that will not work. You need to install the application using installations files. You can find the installation files thru the page linked below.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
Downloading Oracle R12 for windows from edelivery
Hi,
I would like to Download Oracle R12 for windows from edelivery.oracle.com
I am selecting Oracle 12 for windows. Then i get about 25 options to Download.
How many should i Download for complete Oracle R12 software and
do i need to create Directory structure manually or will it be created at time of Downloading from edelivery.com.
regards
KrithikaHow many should i Download for complete Oracle R12
software and Download media ..
From: Oracle Applications Release 12.0 Rapid Install Start Here (Part 1 of 5) - B42431-01 Part 1 of 5
To: Oracle Applications Release 12.0 for Microsoft Windows Rapid Install APPL_TOP - Disk 1 (Part 3 of 3) - V10281-01 Part 3 of 3
do i need to create Directory structure manually or
will it be created at time of Downloading from
edelivery.com.Just unzip the files into one directory (Stage area) and use it to start the installation. -
Mavericks Installer Downloads, but will not run.
I am currently running Mountain Lion, I am trying to install Mavericks, but I am having strange issues.
The Installer downloads from the App Store, runs for a few minutes then returns the error: "This copy of the Install OS X Mavericks application can't be verified. It may have been corrupted or tampered with during downloading."
I checked my date and time prefences, and did everything in http://support.apple.com/kb/TS5307, still no luck.
Now I finally threw in the towel and decided to do a CLEAN INSTALL, I created a USB Recovery disk from another Mavericks Mac and booted from it on this Mac. I deleted the hard drive, and proceeded to do the clean install, after the system completly downloads is simply takes me back to the main menu from the boot disk (where I can choose disk utility, time machiene, install Mac OS X....).
The system will download the installer, but I cannot get the actual installer to run, even when booting from a Recovery Disk.
HELP!!!!!!!!!!Deathknive you are welcome to review the installation logs for the Creative Cloud Desktop application for specific errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors which you discover.
-
Trying to download itunes onto new PC from browser, it comes up with thanks for downloading but it is not !
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I can't download any video or software from Firefox, or play any video and has reinstalled Firefox. I have upgraded to FF 23 and still have the same problems.
Did you remove both older Flash plugins and installed the latest version of the Flash plugin.
# Shockwave Flash 11.7 r700
# Shockwave Flash 11.6 r602
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32).
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
You can find the latest Flash player versions for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting -
Hello Everybody,
I would like to know if some special license is required to download SAP xMII 12 from SAP Service MarKetPlace.
I'm looking for this files but it doesn't appears with my OSS user.
Thanks,Yes, it is a purchased product.
Check with your service marketplace super-user to see if perhaps you don't have the proper download authorization tied to your S#. If you are a customer or a partner then perhaps inquire with your associated account representative.
Maybe you are looking for
-
Question regarding ipad 3 replacement via warrentee.
I have a question, basically my ipad 3 is glitching. It is a 64gb ipad 3, I am fairly positive apple will replace it for me. Considering I purchased the two year warranty. However I am wondering, Will they replace it with a newer ipad model? Or will
-
Hi Experts, I want to develop one Remittance Advice form. So i want to know is there any standard form for Remittance advice. And also please let me know what is meant by "Remittance Advice". Thanks & Regards, Ramana
-
GUYS FIX THIS OUTLOOK , IT DRIVERS ME CRAZY, I CANT SEND EMAIL.
-
How do you group connected objects?
Is there a way you can group objects (in my case text boxes) that have been connected? When I try to the "Group" button is greyed out, and if I group them first, I'm unable to connect them (greyed out).
-
I have a new rewquirement from the client wherein I have to link wbs elements to work orders. Please explain me from scratch what is wbs with necessary examples and the settings required?