Installation error solaris 8
when i installed solaris 8 , i had got the following error
error : assertion failure : "bp != 0","devdb.c" line 788
The root filesystem is not mounted and the configuration assistant has existed prematurely. Boot is unlikely to succeed.
anybody has experience to fix this error
Are you booting using the DCA boot floppy? Or are you booting
directly from CDROM?
"devdb.c" could be read as a hint at the file "/boot/solaris/devicedb/master", a
file that is sometimes modified when third party hardware drivers are
added to solaris. Did you try to add such a third party driver?
Anyway, if you're booting using the floppy, the message <i>might</i>
be a hint at some mangled files under the devicedb subdirectory of
the diskette. In that case prepare a fresh copy of the DCA diskette;
or boot directly from the "Installation" or "Software 1 of 2" cdrom.
Similar Messages
-
Installation error Solaris 10-u6-ga1
I must be missing something really obvious on the installation of Solaris 10 U6. I've come up against the error message upon manually partitioning, and using UFS. After the install the error is:
Solaris 10 10 software installation partially failed
Solaris 10 packages partially installed
SUNWlur
Then at reboot it loops and loops
If I install using ZFS no problem. Unfortunately I have to use UFS for this install.
I pulled down the sol-10-u6-x86-ga1 dvd and installed on an Vmware to see what I'd get. If I manually setup the drive, it fails to with the same error.
Here is my drive layout both sparc server and vmware(x86)
/ = 10 Gb
swap = 10 Gb
/etc = 10 Gb
/usr = 10 Gb
/var = 10 Gb
/export=remaining drive space.
I'm I missing something obvious?
thanks
billThere should be more information in the install log about why the one package failed. If you search for the package name in the log you should be able find it. Then that might help determine whether the package can be installed on its own, possibly fixing your reboot issue.
-- Alan -
Installation Errors on Solaris 8
Hello.I am attempting to install weblogic server 6.0 on a Solaris 8 system. I have successfully used the installer on Solaris 7, but when I run the 'weblogic600_sol.bin' file on the Solaris 8 machine, I get the error "Error: Cant' find libjava.so.". I searched for libjava.so, and sure enough, I didn't find it, BUT, I already have Java2 SDK version 1.2 as well as 1.3 installed and working fine. Any suggestions? Has anyone else run into this previously?Thanks,Kaile
There is a bug in install anywhere. Could you try to remove your existing
JDK? Or, at least make it unaccesible from the command line?
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Kaile Riser" <[email protected]> wrote in message
news:3a70c70e$[email protected]..
Hello.I am attempting to install weblogic server 6.0 on a Solaris 8system. I have successfully used the installer on Solaris 7, but when I run
the 'weblogic600_sol.bin' file on the Solaris 8 machine, I get the error
"Error: Cant' find libjava.so.". I searched for libjava.so, and sure enough,
I didn't find it, BUT, I already have Java2 SDK version 1.2 as well as 1.3
installed and working fine. Any suggestions? Has anyone else run into this
previously?Thanks,Kaile -
Flash installation - fatal error. solaris installation program exited
Not very helpful to say the least. Seems to read the flar file and go through the upgrade and then come up with this error.
Any ideas?paulfoel wrote:
Any ideas?http://www.unix.com/solaris/217675-solaris-10-flash-installation-fatal-error-solaris-installation-program-exited.html
You could have mentioned you were cross-posting this to other sites. -
Problem with ana 3.6 Installation on solaris 10
Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advanceI've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521 -
How to Add a Physical Interface After Installation in Solaris 10
How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
JackHi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do. -
Need Agent Installer for Solaris (SPARC)
Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
SumathiMost commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren -
Access manager installation on solaris zone
Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapdThanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid -
11gR2 installation on Solaris failed with prereuisite 124861-15
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.Hi,
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
thanks,
X A H E E R -
Oracle 11gR2 Installation Error "Invalid Entry Size"
Hi Gurus,
I am getting this error **"invalid entry size (expected 3486269263 but got 19496 bytes) "** during Oracle 11gR2 installation on Solaris 5.10.
Here is the config log
INFO: Extracting files to '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1'.
INFO: Extracting files to '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: invalid entry size (expected 3486269263 but got 19496 bytes)
SEVERE: oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: invalid entry size (expected 3486269263 but got 19496 bytes)
at oracle.sysman.oii.oiic.OiicInstallAPISession.doOperation(OiicInstallAPISession.java:453)
at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:973)
at oracle.sysman.oii.oiic.OiicAPIInstaller.doOperation(OiicAPIInstaller.java:936)
at oracle.install.driver.oui.OUISetupDriver.setup(OUISetupDriver.java:459)
at oracle.install.driver.oui.SetupJob.call(SetupJob.java:166)
at oracle.install.driver.oui.SetupJob.call(SetupJob.java:47)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
INFO: Update the state machine to STATE_READY
INFO: isSuccessfullInstallation: false
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Shutting down OUISetupDriver.JobExecutorThread
SEVERE: [FATAL] invalid entry size (expected 3486269263 but got 19496 bytes)
CAUSE: No additional information available.
ACTION: Refer to the logs or contact Oracle Support Services
SUMMARY:
- invalid entry size (expected 3486269263 but got 19496 bytes).
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:5850
INFO: Advice is ABORT
SEVERE: Unconditional Exit
INFO: Adding ExitStatus FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Database 11g Release 2 Installer
Please help me to solve this issueHi Hans,
Thanks for your reply, after downloading the new installer "invalid entry size" error is gone now.
but once the installer reaches to 68% then its giving the error " Error in invoking target 'mkldflags ntcontab.o' of makefile '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'
Here is the log info:
INFO: (if [ "assemble" = "assemble" ] ; then \
/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/bin/gennttab > ntcontab.s ;\
/usr/ccs/bin/as -P -m64 -o ntcontab.o ntcontab.s ;\
rm -f /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/lib/ntcontab.o ;\
mv ntcontab.o /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/lib/ ;\
/usr/ccs/bin/ar rv /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/lib/libn11.a /export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1
INFO: /lib/ntcontab.o ; fi)
INFO: /usr/ccs/bin/as: error: unknown option '6'
/usr/ccs/bin/as: error: unknown option '4'
usage: /usr/ccs/bin/as [-V] [-Q{y,n}] [-q] [-s]
[-S] [-K {pic,PIC}] [-o objfile] [-L] [-T]
[-P [[-Yc,path] [-Ipath] [-Dname] [-Dname=def] [-Uname]]...]
[-m [-Ym,path]] [-n] [-ul] [-xF] [-xarch={v7,v8,v8a,v8plus,v8plusa,v8plusb,v9,v9a,v9b}] [-xcode={pic13,pic32}] file.s...
INFO: *** Error code 1
INFO: make: Fatal error: Command failed for target `ntcontab.o'
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/export/home/perfuser/app/perfuser/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'. See '/export/home/oemora/logs/installActions2010-03-08_08-42-39PM.log' for details.
Exception Severity: 1
INFO: Adding ExitStatus STOP_INSTALL to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -4
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
Thanks
Krishna -
hi,
i am totally new to this technology.
i had created 3 Zone's on X86 Sun Fire X4270 M2 Hardware (OS - Solaris 10 update 9)
& during OS Installation i had selected Software installations using the Entire Distribution.
every thing worked fine but during zone installation steps, got some package installation error (refer the below output)
bash-3.00# zoneadm -z OFSMU-PWM-zone1 install
Preparing to install zone <OFSMU-PWM-zone1>.
Creating list of files to copy from the global zone.
Copying <158400> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1240> packages on the zone.
Initialized <1240> packages on zone.
Zone <OFSMU-PWM-zone1> is initialized.
Installation of these packages generated errors: <SUNWpostgr-82-libs SUNWpostgr-82-devel SUNWpostgr-83-server-data-root SUNWpostgr-82-server SUNWpostgr-82-contrib SUNWpostgr-82-client SUNWpostgr-82-server-data-root>
The file </zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
i checked the log file "/zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log"
its show below error's
*** package <SUNWpostgr-82-libs> failed to install with fatal errors:
*** package <SUNWpostgr-82-devel> failed to install with fatal errors:
need your help my friends..
thanks in advance....
Edited by: Raja Kondar on Dec 9, 2010 11:59 AMhi DR,
thnks for reply..
but i can see that "postgres" already exist in the system as user &l group.
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh
also the failed packages duirng zone creation steps are already installed in the global zone..
is thr any other way to resolve this issue....
Edited by: Raja Kondar on Dec 16, 2010 11:00 AM -
Adobe creative cloud installation error 201
adobe creative cloud installation error 201
How to solve this problem?Install Adobe application manager and try updating to CC desktop application.
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager : Thank You -
I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!tools is at the top of the apple updater but dont get your hopes up
-
Software Update, 10.6.6 installation error!!
Hi all, hope someone can help.
I have a Mac Pro running 10.6.5. I upgraded to 10.6.5 recently and had problems with this. When using Software Update, it would download, log out and install only to get an error at the end saying it couldn't install, with no explanation of why. I did some investigation and it boiled down to Safari (one of the updates in the list to install along with 10.6.5) wasn't being replaced. I had to delete Safari from my applications folder before updating. I tried rebuilding permissions and even installed from the installers from the apple download page. but until I deleted Safari from my apps folder it would fail every time.
Since I assumed that it was a corrupt copy of safari and all other update went ok I assumed I had fixed the problem.
Now I'm trying to install the update of 10.6.6 via Software Update. and I'm getting the same problems. It downloads, reboots, installs then at the end says that it was not installed because of an error and promps me to restart.
I have downloaded the update and run it from the desktop and it goes through the install as follows:-
Installing
optimizing system
Moving files
installation failed.
It seems that it isn't able to replace existing files on my system with new ones therefore fails the install.
Has anyone got any ideas? I have repaired permissions with disk utility and tried repairing them while booting from the 10.6.3 system disc, still no joy
Many thanksWorse problem here. I get the installation error then the computer attempts to reboot and I get locked at the gray background apple screen. Tried safe boot power on +SHIFT a status bar comes up and goes 3/4 away across and locks. Running permissions repair from Mac OEM disk set was no help. Had to do a time machine restore. Seems my install error is catastrophic. On the upside time machine works very well.. A bit disappointed with my Windows-esque crash
-
== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsersMark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders
Maybe you are looking for
-
Getting no such method error when calling getEnvelope()
I getting this error java.lang.NoSuchMethodError: org.apache.xerces.dom.ElementNSImpl.<init>(Lorg/apache/xerces/dom/CoreDocumentImpl;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)V at com.sun.xml.messaging.saaj.soap.impl.ElementImpl.<in
-
Hi We are not using Tax codes for Service tax as we dont have the scenario CENVAT credit set off. We have assigned WHT codes in vendor master for TDS deduction only. In that case is it possible to post FI entries through FB60 without considering TDS
-
Software update error while connecting to internet
Hi I have a problem with my 3 computer (all mac) They cannot get sofware update while connecting to the server... it worked last week and now it don't on 3 computer!! It seem that they have a problem on the apple server maybe?... That's the message :
-
I have done my webpage with iweb and loaded the site onto the .mac account. if I would do my page under joomla, could I host the page on my apple account too? hope I expressed my question correctly thanks for response
-
Help mov files can not be viewed, created with digital camera
My vacation vids where made with a panasonic lumix z7 camera. the files sizes are 158000, 175000,168000,225457. they all are named my the camera and end with .mov. quicktime does not know what theses files are. windows does not see these files as qui