Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p.  It came with Windows 8, and I installed it on my corporate domain.  I was trying to do some Windows updates so  I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them.  It has about 18 updates it needs from security updates to a .net framework update.  I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do.  It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one.  I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail.  Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information  pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922  error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3)   Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for  x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error  CBS    Startup: Failed to process advanced operation queue, startupPhase: 0.  A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts. 
Phil   

Similar Messages

  • Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

    Hello,
    I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
    I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
    Failed to install the new preview build, please try again later. 0x80246007
    What could be the problem?
    Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
    for this VM. Now that I have this 80246007 error code.
    When looking up System log, the following error messages are listed multiple times:
    Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
    The errors are returned for the Event ID 20 by WindowsUpdateClient
    in task category Windows Update Agent..
    I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
    registry key as suggested in Windows
    Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
    "BranchName"="fbl_awesome1501"
    "ThresholdRiskLevel"="low"
    "ThresholdOptedin"=dword:00000001
    Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
    However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.  
    Looks like Setup is having problems installing in a Hyper-V virtual machine.
    Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
    Any clue why installing under VM causes 9926 to fail?
    Thank you in advance.
    Well this is the world we live in And these are the hands we're given...

    Hi,
    According to the error message, this problem seems like update package installation failed during system upgrade.
    You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
    On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
    Roger Lu
    TechNet Community Support

  • Windows failed to install the following update with error 0x80070005

    Hi,
    We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
    fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
    computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
    on one machine?
    Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
    KB Article Followed : http://support.microsoft.com/kb/968003/en-us

    Okay, good. The SURT shows no errors.
    So now we can blame the problem exclusively on the update itself.
    And yes... there are still known, ongoing issues with KB2862330.
    Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
    less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • I fail to start the sap server with error:Operating system call recv failed

    I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
    R/3 Basis System: Operating system call           recv failed (error no. 10053)
    Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

    trc file: "dev_disp", trc level: 1, release: "620"
    Sun May 07 13:14:30 2000
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        3628
    ***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    Sun May 07 13:14:32 2000
    WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
    Sun May 07 13:14:37 2000
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3212]
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          12784     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
    DpShMCreate: allocated sys_adm at 001E0040
    DpShMCreate: allocated wp_adm at 001E0560
    DpShMCreate: allocated tm_adm_list at 001E3750
    DpShMCreate: allocated tm_adm at 001E3778
    DpShMCreate: allocated wp_ca_adm at 00380438
    DpShMCreate: allocated appc_ca_adm at 00384A88
    DpShMCreate: allocated comm_adm_list at 003861F8
    DpShMCreate: allocated comm_adm at 00386210
    DpShMCreate: allocated ca_info at 003B5010
    DpShMCreate: allocated wall_adm at 003B5018
    MBUF state OFF
    Sun May 07 13:14:38 2000
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
    <ES> 2457 blocks reserved for free list.
    ES initialized.
    ***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6200, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
    DpMsgAdmin: Set patchno for this platform to 674
    Release check o.K.
    Sun May 07 13:15:18 2000
    ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    Sun May 07 13:15:38 2000
    ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W13
    my types changed after wp death/restart 0xbf --> 0xb7
    Sun May 07 13:15:58 2000
    ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W15
    Sun May 07 13:16:18 2000
    ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    my types changed after wp death/restart 0xb7 --> 0xb5
    Sun May 07 13:16:38 2000
    ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W14
    ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W16
    my types changed after wp death/restart 0xb5 --> 0x80
    DP_FATAL_ERROR => DpEnvCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    DpModState: change server state from STARTING to SHUTDOWN
    Sun May 07 13:16:42 2000
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
    MBUF state OFF
    MBUF component DOWN
    ***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

  • Failed to install the new preview build, please try again later. 0xC1900107

    I'm trying to upgrade Windows 10 TP for Enterprise to the new build 8460, but I keep getting the error message
    Failed to install the new preview build, please try again later. 0xC1900107
    I don't find any reference to that error code. I've seen similar reports in the forum, but with different error codes and with the message "Failed to upgrade" rather than "Failed to install". I haven't played with the reg keys on this
    system.
    The event viewer shows the following event:
    Installation Failure: Windows failed to install the following update with error 0xC1900107: fbl_release 9860 Enterprise.
    The upgrade to a non-Enterprise device started at the same time went through without problems.
    Alberto

    Hi Russell,
    What’s the situation now?
    There would be a cause that the upgrade is running background, so a retry would fail in this situation.
    You can check the action log  in C:\$Windows.~BT\source\panther\setupact.log
    Check the time line to see if it is running for upgrade.
    Alex Zhao
    TechNet Community Support

  • Multiple servers hung on reboot after installing the following April 2014 Updates. Anyone else?

    We installed the following updates last night via WSUS.  All of our Windows 2012 R2 servers rebooted but then stuck with the swirling logo and never booted back in to Windows.  We had to power them off and back on again.
    Anyone else find issues with these patches and experience this?  This was consistent.  We are running Vsphere 5.5 u1.
    - Security Update for Windows Server 2012 R2 (KB2922229)  
    - Update for Windows Server 2012 R2 (KB2939087)  
    - Windows Malicious Software Removal Tool for Windows 8, 8.1 and Windows Server 2012, 2012 R2 x64 Edition - April 2014 (KB890830)
    - Rules Update for RRAS Best Practice Analyzer for Windows Server 2012 R2 (KB2928193)
    - Security Update for Internet Explorer 11 for Windows Server 2012 R2 (KB2936068)

    Hi,
    Thank you for posting in Windows Server Forum.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Regards.
    Vivian Wang
    Hello and thank you.  I was able to narrow this down to KB2939087 and reproduce.
    Only our IIS servers, and domain controllers had the problem.  Vanilla 2012 R2 servers did not hang on boot up.
    We installed VIA WSUS and the servers automatically rebooted OK and installed OK but upon boot up they got stuck at the swirling logo and stayed their indefinately until we hard reset them and powered them back up.  There no nothing in the event whatsoever
    to indicate a problem.
    Kind of a big deal to have to babysit all of these servers and hard reset them after installing this update via WSUS.

  • I'm attempting to install cs6 and after hitting install the following message appeared: installer failed to initialize. please download adobe support advisor to detect the problem. well that has been discontinued...

    i'm attempting to install cs6 and after hitting install the following message appeared: installer failed to initialize. please download adobe support advisor to detect the problem. well that has been discontinued...

    rename OOBE Folder to OOBE.old.
    to find OOBE:
    64 bit OS: Program Files x86\Common Files\Adobe\OOBE
    32 bit OS: Program Files \Common Files\Adobe\OOBE

  • Trying to install itunes on windows vista and get the following error message:

    Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.

    A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
    First, I'd strongly suggest setting up a system restore point.
    Now try the Scenario III treatment from the following document:
    Windows Update Error 80070424 in Vista
    Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
    Windows Update error 8000FFFF
    If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
    After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
    Now try another iTunes install. Does it go through without the 0x80070424 this time?

  • Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

    I have the latest 64-bit version of iTunes on Windows 7 Ultimate.  Everything was fine until recently.  Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message:  "This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"  I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities.  Same message appears when I plug in my iPod.  Any help would be greatly appreciated.

    Did you try removing and reinstalling all the Apple software using these instructions:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • When installing itunes 10 uding windows xp I get the following error: "There is a problem with this Windows Installerpackage. A program run as part of the setup did not finish as expected. Contact your sipport personnel or package vendor." - any ideas?

    When downloading itunes 10 in windows xp, I get the following error "There is a problem with this Windoes Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor." - any ideas on how to proceed?

    using MSICUU2.exe didn't help me.  But,  the new replacement app did:
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    I fixed my problem like this:
    Here's the deal - 
    1.  can you install itunes via the APPLE SOFTWARE updater?
    I couldn't  so I downloaded ITUNES and tried to install it that way.   Hence  I got the same error hang as you.  Nothing worked,  (Multiple attempts at uninstall reinstall,  stopping of Services,  Reg cleaners  etc..)
    2.  If answer is NO to #1 you must fixe the APPLE SOFTWARE UPDATE Program. 
    OK  so I couldn't find a Download for this.   But:  if you have WINRAR,  open the ITUNES.EXE and extract the APPLESOFTWAREUPDATE.MSI file.  Execute the APPLESOFTWAREUPDATE.MSI separately.   And you will not be able to install it and have a similar issue as per your Itunes install.   This of course leads you to believe that the Itunes.exe  install is also installing all of these components including the applesoftwareupdate silently.   It must BOMB at that portion of the install and you are done. 
    3.  Your goal now is to get the applesoftwareupdate installed.   How do you do this.  Well -  here is what I did.
      a.  downloaded and RUN a PC  Installer FIX it tool from Microsoft.  This is a replacement for the older MSI fixer they used to use.
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    b. It will list programs to attempt to fix.
      choose  AppleSoftwareUpdate.msi
    c. Once it is done,  then reinstall apple program updater using
    AppleSoftwareUpdate.msi
    Finally it should install since the Microsoft tool appraently fixed corrupted installation files in your registry for this application.
    (Please note:  that I also disabled any apple related services such as BONJOUR or IPOD DEvice RUN:  services.msc to get there -  although this man not be necesarry.)
    Hence Launch this APPLE UPDATE SOFTWARE (Click the ICON in your Start menu)  it should list ITUNES
    select ITUNES from here and it will update.
    KEY HERE is to ONLY UPDATE APPLE Stuff via the APPLE SOFTWARE UPDATE program.  If that program is not working fix it.  Then Bingo.
    I am sorry to see folks having this problem for weeks.  
    APPLE,   Spread the word.  PC's can get corruption in the registry on your product should the update be stopped or computer shut off during an update.  etc...   Please improve your software updater program to check for invalid registry upon launching the app.  This will prevent people thinking it is an APPLE issue.  It appears to be a problem on your PC's registry settings for the APPLE Software update.
    Bruno Ricci

  • HT1926 I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll.  error 7 (windows error 126)

    I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll.  error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can't continue: unexpected failure during app

    I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can’t continue: unexpected failure during application startup  I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

    I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
    I'm baffled....
    Ben

  • I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

    I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

    Have you opened Acrobat and gone to Help>Updates to get an updated install?

  • When installing iMS 5.1 I get the following fatal JRE error near the end of the installation:

    When installing iMS 5.1 I get the following fatal JRE error near the end of the installation:
    The application command "jre -cp "/opt/iplanet/ims5/bin/msg/imta/classes/imtaconfig.jar" com.iplanet.msg.imta.config.InitConfig -d thc-tsg.com -r thc-tsg.com -h development.thc-tsg.com -c /opt/iplanet/ims5/msg-development/imta/config" could not be run.
    OS - Solaris 8
    iDS 4.13

    The IMS installer currently hardcodes the path to a JRE that it wants to run. This JRE is the one that is included in the kit, so you <i>must</i> install the JRE that comes with it.
    The only way around this is to use the embedded JRE during installation and not to set the JAVA_HOME environment variable. Check if you have it defined by issuing the command 'echo $JAVA_HOME'.

  • Disable prompt for "This Website wants to install the following Add-on: Java on Windows 7 x64 SP1 IE 10

    Sorry if this is the wrong place to post this-Didnt see any forum or I missed it for Internet Explorer.
    Here is my problem,  We have uses that are running a webpage that is trying to install an older version of Java, The workstation has the latest version of Java, BUT the webpage seems not to care, and wants to put a older version.
    Is there a way I can disable this:
    "This website wants to install the following add-on: 'Java SE Runtime Environment.....'.
    We have uses that will click on the Install button, and thus compromising the workstation.
    Thanks.

    Hi usgrcm,
    This is a security feature if IE and is not tied to whether or not you have a sight “allowed” to use an add-on.  It behaves in this manor to help protect you against malware. Disabling this notification is not a good choice .
    Have you tried to reinstall the Java software to have a check ?
    There is a possibility the present installation has corrupted .Please restart the machine after reinstalling the software.
    "BUT the webpage seems not to care, and wants to put a older version."
    We can try to install the old version to have a check.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Open and Close Dataset problem

    Hi All, I am facing a weird problem in transferring data to application server. I have used Open dataset to write my file in text format to the application server. Now everything works fine when small amount of data is there.When the number of record

  • How do I update preloaded software?

    Just recently purchased a new Macbook Pro, and opted to have iWork preloaded on it. That's all fine and dandy, and it works great, but since the iWork programs don't show as installed or purchased in the App Store, how do I get updates for them? Is t

  • How to compile package which contain class outside the package

    I am writing a JDBC driver. I have the following package structure in the folder: MyDriver     |_manager.jar     |_com            |_ jdbc                    |_ HXDriver                    |_ HXConnection                    |_ HXResultSet             

  • What do you think of this PSU?: Enermax EG651P-VE 550w

    http://www.enerpoint.com/eg651pvefm24P.htm  Enermax EG651P-VE 550w 36Amps on 3.3/5/12 sounds far better than my current Thermaltake 420watt psu which is only 18amps on 12volt i believe. Because I tend to get a lot of bluescreens/crashes while playing

  • Patch 2510196 on OEM

    Hi, I'm going to apply this patch on OEM 9.2.0 on a Win XP Pro server. in readme of this patch it is said : 1. Shut down the Enterprise Manager 9.2 Oracle Management Server on each machine. would it be enough just to stop the program or I should also