Installation issue with a mounted cluster resource

Hello
given: SC 3.1 9/04 on Solaris 9 sparc
we run RSA Authentication Manager 6.0 on a 2 node cluster.
This is installed into /opt/ace - which is a storage cluster resource.
It's the fact that if I install the ACE into /opt/ace, then I take the storage cluster offline, I still can see all of the underlying ACE directories.
Under normal circumstances the directory should be empty, but it is not.
I don't know why.
ok, step by step
the directory is empty, and the resource is Online -
# scstat -g | grep ace
Resources: ace-rg              ace-stor-res
     Group: ace-rg              pixtest1            Online
     Group: ace-rg              pixtest2            Offline
Resource: ace-stor-res        pixtest1            Online    Online
Resource: ace-stor-res        pixtest2            Offline   Offline
# ls -la /opt/ace
total 2
drwxrwx--x 2 ppark ppark 512 Oct 14 15:39 .
drwxr-xr-x 44 root sys   1024 Oct 14 12:51 ..The ace resource properties are defined like -
# scrgadm -pv |grep ace
Res Group name:                                    ace-rg
(ace-rg) Res Group RG_description:               <NULL>
(ace-rg) Res Group mode:                         Failover
(ace-rg) Res Group management state:             Managed
(ace-rg) Res Group RG_project_name:              default
(ace-rg) Res Group RG_affinities:                <NULL>
(ace-rg) Res Group Auto_start_on_new_cluster:    True
(ace-rg) Res Group Failback:                     False
(ace-rg) Res Group Nodelist:                     pixtest1 pixtest2
(ace-rg) Res Group Maximum_primaries:            1
(ace-rg) Res Group Desired_primaries:            1
(ace-rg) Res Group RG_dependencies:              <NULL>
(ace-rg) Res Group network dependencies:         True
(ace-rg) Res Group Global_resources_used:        <All>
(ace-rg) Res Group Pingpong_interval:            3600
(ace-rg) Res Group Pathprefix:                   <NULL>
(ace-rg) Res Group system:                       False
(ace-rg) Res name:                               ace-stor-res
    (ace-rg:ace-stor-res) Res R_description:
    (ace-rg:ace-stor-res) Res resource type:       SUNW.HAStoragePlus:2
    (ace-rg:ace-stor-res) Res type version:        2
    (ace-rg:ace-stor-res) Res resource group name: ace-rg
    (ace-rg:ace-stor-res) Res resource project name: default
    (ace-rg:ace-stor-res) Res enabled:             True
    (ace-rg:ace-stor-res) Res monitor enabled:     TrueThen I install the ACE server into /opt/ace -
# /var/spool/software/ace6.0/aceserv/sol/sdsetup -primary -f ppark -p /opt -r no
(output omitted)
...The installation creates a few directories in the proper position -
# ls -l /opt/ace
total 9
drwxrwx--x 6 ppark ppark 1024 Oct 14 15:41 data
drwxrwx--x 2 ppark ppark 512 Oct 14 15:41 doc
drwxrwx--x 5 ppark ppark 4608 Oct 14 15:41 prog
drwxrwx--x 3 ppark ppark 512 Oct 14 15:41 rdbms
drwxrwx--x 8 ppark ppark 1024 Oct 14 15:41 utilsNow I take the resource offline, and to my surprise, I see the same directories beneath -
# scswitch -F -g ace-rg
# scstat -g |grep ace
Resources: ace-rg              ace-stor-res
     Group: ace-rg              pixtest1            Offline
     Group: ace-rg              pixtest2            Offline
Resource: ace-stor-res        pixtest1            Offline   Offline
Resource: ace-stor-res        pixtest2            Offline   Offline
# ls -l /opt/ace
total 9
drwxrwx--x 6 ppark ppark 1024 Oct 14 15:41 data
drwxrwx--x 2 ppark ppark 512 Oct 14 15:41 doc
drwxrwx--x 5 ppark ppark 4608 Oct 14 15:41 prog
drwxrwx--x 3 ppark ppark 512 Oct 14 15:41 rdbms
drwxrwx--x 8 ppark ppark 1024 Oct 14 15:41 utils
# df -h
Filesystem            Size Used Avail Use% Mounted on
/dev/md/dsk/d100      5.6G 4.4G 1.2G 80% /
/dev/md/dsk/d105       41G   23G   18G 58% /var
swap                  2.0G 176K 2.0G   1% /var/run
swap                  2.0G 440K 2.0G   1% /tmp
/dev/md/dsk/d104      3.9G 1.3G 2.6G 35% /opt
/dev/md/dsk/d107       15G 208M   15G   2% /opt/oracle
/dev/md/dsk/d106      963M   23M 883M   3% /global/.devices/node@1
/dev/md/log-set/dsk/d6
                       12G 6.6G 5.2G 57% /var/tmp/log
/dev/md/car-set/dsk/d5
                      9.9G 7.9G 1.9G 82% /opt/carConnect
/dev/md/jboss-set/dsk/d7
                      6.9G 377M 6.5G   6% /opt/jboss
/dev/md/ppark-set/dsk/d4
                      7.9G 5.8G 2.1G 74% /opt/ppark
/dev/md/dsk/d206      943M   23M 865M   3% /global/.devices/node@2
#* why that * ??
-- Nick

a more detailed output of the ace resource property -
# scrgadm -pvv |grep ace
      (SUNW.gds:5:Log_level) Res Type param description: Determines the log level for event based traces
      (ppark-rg:bankd-res:Log_level) Res property description: Determines the log level for event based traces
      (ppark-rg:oadm-res:Log_level) Res property description: Determines the log level for event based traces
      (ppark-rg:ebox-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-ws-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-3beg-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-btv-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-bks-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:jboss-obk-res:Log_level) Res property description: Determines the log level for event based traces
      (jboss-rg:apache-res:Log_level) Res property description: Determines the log level for event based traces
      (squid-rg:squid-res:Log_level) Res property description: Determines the log level for event based traces
Res Group name:                                    ace-rg
(ace-rg) Res Group RG_description:               <NULL>
(ace-rg) Res Group mode:                         Failover
(ace-rg) Res Group management state:             Managed
(ace-rg) Res Group RG_project_name:              default
(ace-rg) Res Group RG_affinities:                <NULL>
(ace-rg) Res Group Auto_start_on_new_cluster:    True
(ace-rg) Res Group Failback:                     False
(ace-rg) Res Group Nodelist:                     pixtest1 pixtest2
(ace-rg) Res Group Maximum_primaries:            1
(ace-rg) Res Group Desired_primaries:            1
(ace-rg) Res Group RG_dependencies:              <NULL>
(ace-rg) Res Group network dependencies:         True
(ace-rg) Res Group Global_resources_used:        <All>
(ace-rg) Res Group Pingpong_interval:            3600
(ace-rg) Res Group Pathprefix:                   <NULL>
(ace-rg) Res Group system:                       False
(ace-rg) Res name:                               ace-stor-res
    (ace-rg:ace-stor-res) Res R_description:
    (ace-rg:ace-stor-res) Res resource type:       SUNW.HAStoragePlus:2
    (ace-rg:ace-stor-res) Res type version:        2
    (ace-rg:ace-stor-res) Res resource group name: ace-rg
    (ace-rg:ace-stor-res) Res resource project name: default
    (ace-rg:ace-stor-res) Res enabled:             True
    (ace-rg:ace-stor-res) Res monitor enabled:     True
    (ace-rg:ace-stor-res) Res strong dependencies: <NULL>
    (ace-rg:ace-stor-res) Res weak dependencies:   <NULL>
    (ace-rg:ace-stor-res) Res restart dependencies: <NULL>
    (ace-rg:ace-stor-res) Res property name:       Retry_interval
      (ace-rg:ace-stor-res:Retry_interval) Res property class: standard
      (ace-rg:ace-stor-res:Retry_interval) Res property type: int
      (ace-rg:ace-stor-res:Retry_interval) Res property value: 300
    (ace-rg:ace-stor-res) Res property name:       Retry_count
      (ace-rg:ace-stor-res:Retry_count) Res property class: standard
      (ace-rg:ace-stor-res:Retry_count) Res property type: int
      (ace-rg:ace-stor-res:Retry_count) Res property value: 2
    (ace-rg:ace-stor-res) Res property name:       Failover_mode
      (ace-rg:ace-stor-res:Failover_mode) Res property class: standard
      (ace-rg:ace-stor-res:Failover_mode) Res property type: enum
      (ace-rg:ace-stor-res:Failover_mode) Res property value: SOFT
    (ace-rg:ace-stor-res) Res property name:       MONITOR_CHECK_TIMEOUT
      (ace-rg:ace-stor-res:MONITOR_CHECK_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:MONITOR_CHECK_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:MONITOR_CHECK_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       MONITOR_STOP_TIMEOUT
      (ace-rg:ace-stor-res:MONITOR_STOP_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:MONITOR_STOP_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:MONITOR_STOP_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       MONITOR_START_TIMEOUT
      (ace-rg:ace-stor-res:MONITOR_START_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:MONITOR_START_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:MONITOR_START_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       UPDATE_TIMEOUT
      (ace-rg:ace-stor-res:UPDATE_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:UPDATE_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:UPDATE_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       VALIDATE_TIMEOUT
      (ace-rg:ace-stor-res:VALIDATE_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:VALIDATE_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:VALIDATE_TIMEOUT) Res property value: 1800
    (ace-rg:ace-stor-res) Res property name:       STOP_TIMEOUT
      (ace-rg:ace-stor-res:STOP_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:STOP_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:STOP_TIMEOUT) Res property value: 1800
    (ace-rg:ace-stor-res) Res property name:       START_TIMEOUT
      (ace-rg:ace-stor-res:START_TIMEOUT) Res property class: standard
      (ace-rg:ace-stor-res:START_TIMEOUT) Res property type: int
      (ace-rg:ace-stor-res:START_TIMEOUT) Res property value: 90
    (ace-rg:ace-stor-res) Res property name:       FilesystemCheckCommand
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property class: extension
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property description: Command string to be executed for file system checks
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property type: stringarray
      (ace-rg:ace-stor-res:FilesystemCheckCommand) Res property value: <NULL>
    (ace-rg:ace-stor-res) Res property name:       GlobalDevicePaths
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property class: extension
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property description: The list of HA global device paths
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property type: stringarray
      (ace-rg:ace-stor-res:GlobalDevicePaths) Res property value: <NULL>
    (ace-rg:ace-stor-res) Res property name:       FilesystemMountPoints
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property class: extension
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property description: The list of file system mountpoints
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property type: stringarray
      (ace-rg:ace-stor-res:FilesystemMountPoints) Res property value: /opt/ace
    (ace-rg:ace-stor-res) Res property name:       AffinityOn
      (ace-rg:ace-stor-res:AffinityOn) Res property class: extension
      (ace-rg:ace-stor-res:AffinityOn) Res property description: For specifying affinity switchover
      (ace-rg:ace-stor-res:AffinityOn) Res property type: boolean
      (ace-rg:ace-stor-res:AffinityOn) Res property value: TRUE

Similar Messages

Installation Issues with Win XP

Hi, how are all of you? I am having installation issues with
Windows XP. Every time I double click the Adobe Air installer, it
says, "Installer encounters an error and need to be close"
I have tried on three different PC. All giving same error. I
downloaded the installer many time from adobe site but nothing
works.
Windows XP SP2
512MB RAM
Pentium IV 2.4 GHz Processor
Any suggestion or help will be greatly appreciated.
Thanks,
.:.WAHAB

Hello Tzeng, thank you for your reply. I could not get to the
log file you mentioned in your reply but here is file generated
when I get the error:
FILE LOCATION
F:\DOCUME~1\DUR-E-~1\LOCALS~1\Temp\c022_appcompat.txt
<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="Adobe AIR Installer.exe"
FILTER="GRABMI_FILTER_PRIVACY">
<MATCHING_FILE NAME="Adobe AIR Installer.exe"
SIZE="42304" CHECKSUM="0xAC3BF086" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="setup.exe" INTERNAL_NAME="setup.exe"
LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x13891"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:35:52" UPTO_LINK_DATE="02/12/2009 19:35:52" />
<MATCHING_FILE NAME="AdobeAIRInstaller.exe"
SIZE="15739760" CHECKSUM="0xA9D06949" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="Adobe AIR Installer.exe" INTERNAL_NAME="Adobe
AIR Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems
Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0xF1128F"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:35:39" UPTO_LINK_DATE="02/12/2009 19:35:39" />
<MATCHING_FILE NAME="flashplayer_9_plugin_debug.exe"
SIZE="1786846" CHECKSUM="0x2FE8A8E1" BIN_FILE_VERSION="9.0.159.0"
BIN_PRODUCT_VERSION="9.0.159.0" PRODUCT_VERSION="9.0.159.0"
FILE_DESCRIPTION="Adobe® Flash® Player Plugin Installer"
COMPANY_NAME="Adobe Systems Incorporated" PRODUCT_NAME="Adobe®
Flash® Player Plugin" FILE_VERSION="1.0.20"
LEGAL_COPYRIGHT="Copyright © 1996-2009 Adobe Systems
Incorporated and its licensors. All Rights Reserved."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x18FD8B"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="9.0.159.0"
UPTO_BIN_PRODUCT_VERSION="9.0.159.0" LINK_DATE="01/13/2007
18:28:10" UPTO_LINK_DATE="01/13/2007 18:28:10"
VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="setup.msi" SIZE="30720"
CHECKSUM="0xF9521F1C" />
<MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe AIR
Application Installer.exe" SIZE="67392" CHECKSUM="0x78783101"
BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR Application
Installer" COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe
AIR 1.5.1" FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR
Application Installer.exe" INTERNAL_NAME="Adobe AIR Application
Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x145F9"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:34:43" UPTO_LINK_DATE="02/12/2009 19:34:43" />
<MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe
AIR.dll" SIZE="7876928" CHECKSUM="0x7F6C1C4D"
BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR"
COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe AIR 1.5.1"
FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR.dll"
INTERNAL_NAME="Adobe AIR.dll" LEGAL_COPYRIGHT="Copyright 2009,
Adobe Systems Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0"
VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32"
PE_CHECKSUM="0x789021" LINKER_VERSION="0x0"
UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
<MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
CS3\Setup.exe" SIZE="2685104" CHECKSUM="0x7309F0C8"
BIN_FILE_VERSION="1.0.135.0" BIN_PRODUCT_VERSION="1.0.135.0"
PRODUCT_VERSION="1,0,135,0" FILE_DESCRIPTION="Adobe Setup"
COMPANY_NAME="Adobe Systems, Copyright 2005-2007"
PRODUCT_NAME="Adobe Setup" FILE_VERSION="1,0,135,0"
ORIGINAL_FILENAME="Setup.exe" INTERNAL_NAME="Setup.exe"
LEGAL_COPYRIGHT="Adobe Systems, Copyright 2005-2007. All rights
reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x298CDB"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.0.135.0"
UPTO_BIN_PRODUCT_VERSION="1.0.135.0" LINK_DATE="03/16/2007
23:30:15" UPTO_LINK_DATE="03/16/2007 23:30:15"
VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
CS3\WinBootstrapper.msi" SIZE="1823744" CHECKSUM="0x88506662" />
</EXE>
<EXE NAME="Adobe AIR.dll"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="Adobe AIR.dll" SIZE="7876928"
CHECKSUM="0x7F6C1C4D" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR" COMPANY_NAME="Adobe Systems Inc."
PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="Adobe AIR.dll" INTERNAL_NAME="Adobe AIR.dll"
LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x789021"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
</EXE>
<EXE NAME="kernel32.dll"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="983552"
CHECKSUM="0x4CE79457" BIN_FILE_VERSION="5.1.2600.2180"
BIN_PRODUCT_VERSION="5.1.2600.2180" PRODUCT_VERSION="5.1.2600.2180"
FILE_DESCRIPTION="Windows NT BASE API Client DLL"
COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft®
Windows® Operating System" FILE_VERSION="5.1.2600.2180
(xpsp_sp2_rtm.040803-2158)" ORIGINAL_FILENAME="kernel32"
INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft
Corporation. All rights reserved." VERFILEDATEHI="0x0"
VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2"
MODULE_TYPE="WIN32" PE_CHECKSUM="0xFF848" LINKER_VERSION="0x50001"
UPTO_BIN_FILE_VERSION="5.1.2600.2180"
UPTO_BIN_PRODUCT_VERSION="5.1.2600.2180" LINK_DATE="08/04/2004
07:56:36" UPTO_LINK_DATE="08/04/2004 07:56:36"
VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
</DATABASE>
Seems like an XML doc.
I tried by extracting all the file with WinRAR but nothing
worked
Please let me know if you need more information.
Thanks
.:.WAHAB

Issue with AFP Mounts

I am migrating the user homes from a Linux server to a 10.5.8 Xserve.
The users are all setup in an LDAP environment.
The homes are currently on an NFS server running Linux. All users login to network accounts and are automatically connected to their NFS homes upon login.
I would like to start only migrating the files and thereby changed the users homes to something like this:
/Network/Servers/<afs server>/Volumes/NetworkFolder/testuser
The user testuser has the same uid, user, pwd in the LDAP as on the new Xserve. The Xserve volume is finally mounted and I can login with my network home as testuser. However, the files are all read only. I cannot change anything in the new home files.
The access log on the AFS server says I'm logged in as Guest
I'm sure its a simple option I'm forgetting either in the LDAP config or on the AFS - I just seem to be stuck.
Any idea on how to get this to work would be greatly appreciated.
- Thanks, Peter

I was looking for something like this. I have just bought a WD My Book World NAS drive. I connected it to my old router (G) and discovered it was too slow to wirelessly stream high bitrate music or movies. I then bought a Belkin N+ router which resolved this issue. However I have trouble with the mounts. When I wake my MacBook from sleep I can normally see the drive under Shares in Finder, but after some minutes it disappears. If I Go -> Network in Finder it turns up, but will not connect. The funny thing is I can be streaming music from the darn thing without interruption! The network shares on the desktop also turns on/off erratically. I can still access the folder contents from these even that the drive is not visible in Finder.
The NAS is set up for AFP on all shares which should be ok. I have tried both dynamic and fixed IP address on the NAS, but my Mac gets it dynamically. I'll try a fixed IP for this.
People are talking about automatic mount of network resources on start up. I came from Windblows and do not know all the fancy Unix commands and config files stuff. So how do you folks do this?
Will be much appreciated, thanks!

Bootcamp windows 8.0 pro installation issue with early 2015 Macbook Pro

I am having this issue with installing Windows 8.0 pro (and 8.1 pro) on my early 2015 MacBook pro vs. Bootcamp. I have tried different method for multiple times and all failed. Any help is appreciated.
Hardware: (1) early 2015 MacBook Pro with 128GB (13 inches) , (2) Sony USB DVD burner. (3) Two 16 gb flash drive 2.0 version from two different manufactures
Software: (1) 8.0 Pro ISO on flash drive from Microsoft (I have two copies) (2) 8.1 Pro downloaded from Microsoft website.
Note - I was able to download the bootcamp supporting files successfully and copy to a USB flash drive.
Method 1 - Create the installation disk from ISO on flash drive and also tried copying ISO on hard drive (desktop)- failed.
I have a 16 GB flash drive (2.0V) connected
ISO is a valid 8.0 pro copy from Microsoft came on a flash drive.
I have the windows 8.0 pro ISO on a flash drive and plugged in.
Issue - It gets to around 50% of "Copying Windows files..." and then doesn't go any further. 8 hours later, still stuck at around 50%. I also tried to do the copy ISO from desktop. failed as well.
Method 2 - I repeat the above steps with Windows 8.1 ISO downloaded Microsoft website - failed. Stuck at 50% copying windows file for 9 hours.
Method 3 - I burned the Windows 8.0 pro ISO to a DVD and try to do the installation through a DVD instead. DVD was successfully created.
I was able to perform the partition. When the computer reboots, it starts the window installation. However, it got stuck at 7% forever. I tried this multiple times and failed.
Method 4 - I download a 8.1 Pro ISO from Microsoft website, I burned it to a DVD. Repeat method 3, Again, windows installation stuck at 7%.
Method 5 - I called Apple. - What they told me is pretty much repeat the above steps. Still failed.

The ISO file(s) being downloaded seem to be corrupted. Can you use Microsoft FCIV tool - https://support.microsoft.com/en-us/kb/841290?wa=wsignin1.0 ?
The DVDs should be burnt at the recommended rate for the physical media. DU should be used for burning the DVDs.
Reference Disk Utility 12.x: Burn a disk image to a CD or DVD and Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support.

SAP R/3 4.6 Installation issue with SAPMMC

Hi ALL,
Hi ,
We are installing SAP 4.6 C SR2 on AIX and Window environment.
Both CI and DB Instances are in AIX box and DI is on Windows env.
we completed our SAP R/3 4.6 c sr2 CI and DB Installations with all the Patch levels on AIX 5.3 p570.
Now we are working on SAP Application Server Installation, We Configured SAMBA on AIX Boxes and able to communicate with AIX from Windows application servers.
During the Application Installations , we followed the domain install , we got some minor issues and we fixed those, finally the installation went fine and successfully.
Now we are facing one Issue with SAPMMC- When we try to start the sap from SAPMMC the status remains in "YELLOW" with "Running but dialog Queue info unavailable" Error, Even r3trans -d working fine and we are able to logon to the SAP system through Application Server and run
transactions .
we applied note #72248 . but we still running the same problem.
I would really appreciate If any one provide some sugessions , on this issue.
Thanks in advance
Nara.
[email protected]

Hi.
I've just carried out this architecture. You have to check 2 things:
1- Are your DB software levels the same? (AIX + Windows)
2- Have you checked connectivity from client to DB server?
Regards,
Fatih Erten

Any Invalid Serial Number Installation Issue With PSE 12 - PE 12 Windows or Mac ?

http://forums.adobe.com/message/5711110#5711110
Today I went from Photoshop Elements 12 and Premiere Elements 12 tryouts to the purchased boxed versions that came with two installation discs. One of the discs was for Photoshop Elements 12 and Premiere Elements 12 Windows and the other for these versions on Mac.
On Windows 7 Professional SP1 64 bit desktop computer, I was hit with Invalid Serial Number for the installation of Photoshop Elements 12 which I did first. Tried 4X, double and triple checking to make sure this was not "user error". It was not. On the 5th try, the purchased serial number was accepted and the installation went to a successful completion.
Tonight a friend alerted me to reports of similar happening for a lot of Photoshop Elements 12 Mac users. See the link posted at the top of my post.
At no time did I see this problem with Premiere Elements 12 installation from the same disc as for Photoshop Elements 12 installation.
Afterward, I installed these programs with the same installation disc on my laptop computer Windows 8 64 bit, I did not have any problems with either installation.
At this time, I do not know if this Invalid Serial Number is elusive to Photoshop Elements 12 or not.
If anyone is experiencing this problem with Premiere Elements, please let us know.
From the link above, it would appear that Adobe is working on the issue.
Thanks.
ATR

shikha
Thanks for the reply.
In my case, I had the network firewalls and anti-virus disabled when I did the installs of Photoshop Elements 12 and Premiere Elements 12 on Windows 7 64 bit as well as Windows 8 64 bit.
I was fortunate in that a 5th try of the serial number entry for the Photoshop Elements 12 install on Windows 7 64 bit was successful, so I did not have to do the computer restart and retry of the install with the purchased serial number. But, good to keep in mind, just in case.
It is ironic...last time around I got caught up in the Shared Technologies issues with Photoshop Elements 11 and Premiere Elements 11 on Windows 8 64 bit, not Windows 7 64 bit. But, in that case, I did find my way eventually to a successful install on Windows 8 64 bit. This time around it was Windows 7 64 bit where the glitch occurred, but, for me, only for Photoshop Elements 12.
But, could you clarify...are you generalizing that Photoshop Elements 12 Mac Invalid Serial Number is due to server issues and Invalid Serial Number encountered by Photoshop Elements 12 Windows is "online - due to some firewall or network issues"?
Just getting prepared for if and when more questions on Invalid Serial Number might pop up in this forum.
Thanks.
ATR

A weird installer issue with xcode

This is a new macbookpro i bought only a few weeks ago. I installed xcode on it, then removed it due to the fact that i needed to put some really huge hd video files, which needed all the hard disk space i could muster. After moving the videos from my mbp to my external hd, i tried to install xcode again. However, xcode's mpkg won't open, no matter how many times i open it with installer. Other mpkgs and pkgs work fine. What's the problem?

Hi rhonnywhoop, and welcome to the Dev Forum!
rhonnywhoop wrote:
I installed xcode on it, then removed it ... i tried to install xcode again.
There's no such thing as a weird issue with Xcode after an uninstall-install again cycle. Almost anything can go wrong and weird is the rule, not the exception. But yes, most of the strange problems show up after the installation (e.g., Xcode won't open, Xcode starts up but gcc always fails, Interface builder won't read nib files, etc., etc.). If I needed disk space for a video, I'd probably get another drive before I'd uninstall Xcode, but then I use Xcode all the time. Plus it's too late for that advice, so I'll try my best to point you in the right direction.
A few questions:
1) Was there any message when the mpkg failed to open? Please post any such message for us;
2) Did you install from the DVD that came with your MacBook, or did you download a dmg from the Mac or iPhone Dev Center? If you haven't tried downloading the latest Xcode version yet, that might be worth trying;
3) Did you uninstall from Terminal, using the command given in the Xcode doc (e.g. /Developer/"About Xcode Tools.pdf"? If not, how did you uninstall the prior Dev Tools?
4) Is any entry made in one of your logs at the time of the failure? E.g., open Console.app (in /Applications/Utilities) and look for the most recent entries in install.log and system.log. If you find anything like that, please post it for us;
5) Have you tried any additional cleanup besides the recommended uninstall (question 3, above)? Based on case histories in this and other forums, the most powerful trick is to rename /Developer (e.g. to /OldDev). Other tips will be found by searching on terms like "uninstall" or "clean" in this forum.
In general, we can assume that since your previous installation was successful, the game is to restore your system to its past condition. This may seem like a no-brainer, but it might help to rule out irrelevant conditions as you try one thing after another. In fact, some developers have cleaned up by re-installing the entire system (needless to say, be sure to try restarting your system before resorting to anything that drastic!). On the other hand, some developers have reported that installing a more recent version of the Dev Tools (if any), can clean up a problem when repeated installs of the same system fail.
I hope something above will lead you to a solution. Several other developers who regularly contribute to this forum know much more than I do about installation problems. For example, if etresoft joins this thread, be sure to follow his instructions completely and before any others.
\- Ray

[SOLVED] Post installation issues with KDE 4.7.0

I reinstalled my machine (DELL Studio 540 PC) with Arch Linux 64 bit. I did an install using LVM2 and RAID (have 2 500 GB drives in my machine). Everything went fine with the installation and bootloader (grub2) but I'm having a few issues with KDE and grub2.
1. When booting my machine grub2 gives an error saying "error: fd0 not found" (twice). My machine does not have a floppy drive and has never had one. There is no option in the BIOS to turn floppy off. So why is grub2 complaining about it?
2. With KDE 4.7.0 thumbnails of pdf files are not generated anymore, they were with previous versions of KDE4. Anybody else have that issue with 4.7?
3. I have and Brother DCP-7045n printer in my network and when try to print from a KDE program (Koffice, Kate, Kwrite, Kile etc.), the margins are completely messed up. The print preview on the screens looks right but the actual print everything shift upwards to the right. So things on top of a page are cut off for example. Printing from Gnome/GTK apps (Acrobat Reader, Libreoffice etc.) do not show this behaviour. I 've had this issue with KDE4 since KDE 4.3. Here is the original ustream bug:
https://bugs.kde.org/show_bug.cgi?id=196590
Anybody got an idea how to fix this?
4. Skype is crashing on me on startup constantly several times before it finally runs. I've had this problem since the 2.2.x series got released? Anybody got a fix for that. I was hoping a reinstall would fix that problem (same with the printing issue) but no luck.
5. I'm using KDE's microblogging plasma app to check my twitter account but I can't get to remember my password. Everytime I log into I have to manually login to my twitter and kdewallet is running and has my password stored and everything. This one really pusles me.
6. The final issue I having and issue was also the reason why I wanted to reinstall my machine in the first place. I originally used KDEmod as my desktop but they stopped making KDEmod some time ago when they started working on Chakra. So I removed KDEmod and installed KDE from Arch directly. A nice feature of KDE4 is its ability to generate previews on folders containing images and videos. When I switched to KDE that feature stopped working. So I was expecting that with a fresh install that this work and it does except for folders containing jpeg files. If I have a folder containing only jpeg files no previews/thumbnails are generated on the folder but previews the jpeg files themselves are generated. Does anybody else have that problem with jpegs and folder previews?
Hope somebody can help me with these few issues...
Last edited by fettouhi (2012-04-05 06:00:06)

benny_kenobi wrote:
fettouhi wrote:1. When booting my machine grub2 gives an error saying "error: fd0 not found" (twice). My machine does not have a floppy drive and has never had one. There is no option in the BIOS to turn floppy off. So why is grub2 complaining about it?
Have you installed grub2 with that --no-floppy flag as described in:
https://wiki.archlinux.org/index.php/Grub2#BIOS_systems?
fettouhi wrote:2. With KDE 4.7.0 thumbnails of pdf files are not generated anymore, they were with previous versions of KDE4. Anybody else have that issue with 4.7?
fettouhi wrote:Does anybody else have that problem with jpegs and folder previews?
Nope. Is it selected in dolphin>settings>general>previews.
fettouhi wrote:5. I'm using KDE's microblogging plasma app to check my twitter account but I can't get to remember my password.
Well that won't be a solution, but you might use choqok instead - at least it stores the password.
To answer your first answer, yes I installed grub2 with the --no-floppy option as mentioned in the wiki. Regarding 2 I don't understand why that works for you then? I have all things turned on under previews (folder, video, jpeg etc.) but as mentioned in my first post I have no previews with pdf files and jpegs do generate on folder previews. Finally regarding 5 the microblogging plasma app worked fine on my old installation even after I updated to KDE 4.7.0. The password issue I'm having is on my fresh install.

3rd party app Installation issues with Leopard

I recently purchased a new MacBook Pro with Leopard installed. I have been trying to install (from original media) a number of applications (such as Office:mac 2004) that install and run well on my old G4 running Tiger. On Leopard the installer won't even open the package. I have checked permissions, am in an admin account, etc but nothing seems out of place. I also recognize that these installation packages are pre-Leopard but I can't imagine all my software is now obsolete. Anyone have any suggestions?
Thanks,
Doug

Yes I have checked selected applications that I am having issues with. Office:mac 2004 is being used by others on Leopard and Intel based platforms. Not sure if 100% of these users migrated the installation from a prior machine or were upgrading the OS so already had it installed but that is highly unlikely. A demo copy of this even came with my machine. Per advice from other discussion groups this was completely removed prior to trying to install my bought copy of the software. I had believed that Rosetta would allow most (all) apps that ran on a PowerPC under Tiger to work. Since I can't get the installer to even run, I can't tell if the app itself will work.
BTW, I am about to go back and reinstall Leopard to see if that solves the problem.

Installation Issue with Secure Enterprise Search 11.2.2.2

Hi,
I'm facing an issue with Oracle SES 11.2.2.2.
I have installed this on 11.1.1.6 middleware softwares and weblogic 10.3.6 and the installation is successful. The admin UI opens up in the browser. (http://localhost:13102/search/admin/index.jsp)
However, when I install it in another environment where 11.1.1.8 versions of middleware softwares are present with weblogic 10.3.6 (performing exactly same steps as above). The admin UI does not open up. When I click on the login button nothing happens.
Has anybody faced this problem before?
Thanks,
Rohan

I would suggest that you open an SR with Support on this issue
HTH
Srini

After installation: issues with TOC subchapters

Hi all,
I noticed that after installation on a device there were two issues with subchapters in the TOC (i.e. what would be books in a classic Webhelp or HTML Help).
1. Wrong jumps
When jumping into the submenu of the TOC and when returning using the 'back' button at the top of the submenu, there is often a wrong jump to an arbitrary topic of the project. This was consistent in a particular output, but if I simply generate and install the apk again then it is usually gone or a different submenu show this problem.
2. System default styles applied
Instead of using the hover and active colors defined for toc nodes in the Screen Layout (e.g. brown in the iPhone layout), the default highlight colors of the mobile device (e.g. green) are applied. This is only the case when jumping into a submenu or back, not for other actions of the apk's UI. It seems that perhaps a CSS definition is missing in the mobile.css?
I tested this using the Android phone and iPhone layouts. None of these problems occur when viewing the HTML 5 output in the browser. Does anybody else encounter these problems / know a solution?
Robert

Solved: the mystery of the erratic jumps.
The reason is an inaccurate control. If I touch the display with my finger tip at the vertical middle of a TOC entry and with the lower part of my finger tip also touching into the next TOC entry, then the app highlights the first entry but jumps to the second target.
Maby an issue of the HTML5 code, maby an issue of my device..
Addition: I tested it on two other devices and they show this issue too, although to a varying extent depending on screen resolution. The problem remains that if the user touches the fields inaccurately then the software sometimes highlight one TOC entry but jumps to the next entry's target.

Installation issues with mavericks

I have an early 2011 - 15" Macbook Pro which I have recently tried to upgrade to OS X 10.9 Mavericks. The installer grey's out the only hard drive on the system despite having 349.0 GB free on the drive. I have looked at the permissions, I have checked the format and even done the CMD + R on reboot but to no avail. Does anyone have any ideas? There appears to be no partition on the drive so I am stumped. Funnily enough my 2008 Mac Pro had no issue with the upgrade. Any thoughts or ideas welcome.

Hi mikeallan35!
I have an article that may help you resolve this issue with installing Mavericks on your computer:
Firmware updates for Intel-based Macs require a GUID partition scheme
http://support.apple.com/kb/ht2434
Thanks for using the Apple Support Communities. Have a good one!
-Braden

World of Warcraft installer issue with WRT110

I have a strange issue with runnnig the initial install for World of Warcraft. I have three computers on my network using a WRT110 router. None of them (Windows Vista 32-bit and WIndows 7 64-bit) would run the installer.exe correctly. Meaning once I ran the InstallWOW.exe program it would download some files and than automatically run installer.exe. This program would just sit at "Downloading new installer..." and never go the the screen where you would then click on INSTALL. I beat myself up for awhile on this. I added entries for the WOW forward ports and tested them with pfportchecker.exe to make sure they were open both inside and out but none of the PC's would run installer.exe correctly. I even forwarded all the tcp/udp ports for 1 - 9999 to a PC with a static IP. Nothing. Finally, I removed the router and connected my PC direclty into the Cable modem and it worked. The INSTALL screen popped right up. Once I installed the normal game I reconnected the router and successfully downloaded and installed all the patches wihtout the port forwarding setup. Go figure.
I'm confused as to what involvement the router has for the installer.exe program versus the patches. It makes no sense to me to have to removed the router from the equation just to get the initial install to run yet patches ran fine even WITHOUT the forwarding setup. I have the latest firmware 1.0.07 as well. Anyone have any clues? WIth all 3 PC's having the same issue and with them running two different WIndows versions it seems the router is the problem. Is there a setting I'm missing or is this a bug??? Thanks,

I can try this. My understanding is the WRT110 default is auto which in essence is 1500. What value should I try? I've read setting this to 1492 for PPPoE and 1460 for PPTP, but I don't think these apply to WoW. I also read where DHCP, which is what I'm using with Comcast, uses a 1500 MTU, which is the default. I will try this messing with this setting and see if my other PC's can than run the WoW installer correctly. Would be nice to figure this out so I don't have to directly connect the the Cable modem in the future to get around whatever this issue is. Thanks for your response.

Any suggestions on how to fix installation issues with iPhoto & iMovie on used Mac mini?

I bought a used, mid 2011, mac min. The selller deauthorized all his applications and resotred it to factory settings for me. When I received it, I added myself as an administrator and deleted the dummy user the seller had created after restoring the OS. The first thing I wanted to do was install applications I already have on my iMac (also running OSX Lion). It would not install iPhoto or iMovie. It said these applications were assigned to a different apple id, the previous owner. I decided to erase the hard drive and reinstall Lion myself. I ran into some snags (due to my internet connection) and had to use recovery thumb drive, but it worked.
I successfully re-installed Lion on the newly formatted hard drive.
I still cannot install iPhoto and iMovie. It just give me an error now. Couriously, it installed Garage Band just fine. I haven't had any other issues with other applications I purchased on my other iMac.
Anyone have any suggestions, besides purchasing iPhoto and iMovie on the mac mini?

Ethernet cord connected to the router solved it. This is exactly what I had to do when I reinstalled the operating system. For some reason my wireless internet is highly inreliable. It drops out constantly. I've always had my iMac hard wired to the router, but I'll have to figure out a fix for this Mac mini. I can't have a 30ft ethernet cord running through the middle of my basement. Thanks.

Consistent windows errors and installation issues with win 7

I am experiencing repeated blue screen errors (bad pool error and failed to clock interrupt among others) and now have issues with enabling windows firewall (error 8007042c) among various other windows errors also windows restore is not working would appreciate
any advice thank you.

Hi,
Please refer to this KB to troubleshoot the windows firewall (error 8007042c), begin with scanning for malware.
http://support.microsoft.com/kb/2530126
Regarding to the blue screen, I sugegst you keep Windows up-to-date, install latest drivers, if this doesn't help, please upload the latest dump files to a public location like OneDrive, then paste the downlaod link here for further analysis. (default location:
%SystemRoot%\MEMORY.DMP or minidump)
http://windows.microsoft.com/en-in/onedrive/share-file-folder
Yolanda Zhu
TechNet Community Support

Installation issue with a mounted cluster resource

Similar Messages

Maybe you are looking for