Installation of machine after delivery & Resite of machine

Kindly refer the below process u2013
1. Scenario u2013
u2022     Customer has one machine installed in one location and he requests to relocate the machine from one location to another 
It could be from one branch to another branch ( Both branch are in different cities )
u2022     The relocation of machine can happen within one city (e.g destination location and the current location of machine is in same city and under one branch)
u2022     Sometimes client charges for its service and sometimes it does not charge ( e.g If relocation to be happen is in same building )  
2. After delivery of machine to customer premises client sends his service engineer to install the machine and after the successful installation only client raises the bill to customer .
How could i capture this installation process in SAP
Kindly provide your inputs
Regards,

Hi Ravi,
This Scenario is related to Customer Services module in SAP, Please fallow these steps.
1, you need to maintain all SD relevant data along with Customer master data and material master (Create also a service material for billing on installation) for the machine as well.
2, Under Plant maintenance & Customer Services Menu in SAP configure the following:
     a), Define the Functional locations of the customer where you have to install the machine.
     b), Define machine or Equipment as per your requirement. Also work centre if required.
     c), for service processing (External) configure the service order types I.e. u201CSM02u201D.
Also ref. the link: http://help.sap.com/saphelp_46c/helpdata/en/e6/4a903f9e0311d189b70000e829fbbd/frameset.htm
3, for Billing please ref. Resource related billing, here you need to maintain a DIP Profile using u201CODP1u201D and check the consistency with u201CODP2Au2019.
Also maintain copy controls for order type (DR) to billing type.
     Maintain Cost elements for the service material in the DIP profile in material determination view.
Further you follow the Service processing through service order creation till billing (Broadly) :
Service notification (IW51) -> Service order creation- > Entry of equipment, SP, components-etc>,service order confirmation (IW41) - >, Debit memo request - > Billing
Once you create service order only you can send the service technician to the customer site, and do resource related billing. Any doubts please get back.
Please try all the best.
Regards
DSR

Similar Messages

  • Having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we did

    having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

    Hey robr72339266,
    With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
    But, you cannot use Acrobat on both the machines simultaneously.
    You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
    Please Contact | Adobe to seek help on the same.
    Regards,
    Anubha

  • How to re-activate 'Mail' after complete successful Time machine re-installation except 'Mail' backup keeps getting stuck?

    How to re-activate 'Mail' after complete successful Time machine re-installation except 'Mail' backup keeps getting stuck?

    Trying to re-instal my email history the 'Mail Message Import' dialogue screen says: 'Mail needs to import your messages. This might take a few minutes. You won't be able to use Mail until the import is finished'.
    The problem is: after importing 5,000 messages it stops and the 'Time remaining' only keeps adding up to many hours (17 hours). There are almost 80,000 email messages in my Time machine backup.
    How to get this working? I am even prepared to give up my email history if i can only get my 'Mail' application working again.

  • Restore Mac from Time Machine, after grey screen

    I'm working with an iMac running Mountain Lion from 2011 with Intel chip
    The computer keeps loading up to grey screen. I was able to get to the screen where I get to choose
    Restore from Time Machine
    Reintsall OSX
    Get help online
    Disk Utility
    I try to restore from Time Machine but after i " select a backup" date it keeps seacrhing for disk and stays stuck on page that says Select a Destination.
    This is my fathers Mac and I'm trying to help him fix it. Any help would be greatley appericated
    Thanks

    Most likely, some folders were inadvertently excluded from your backups, and as a result you can't restore your data in Recovery, Setup Assistant, or Migration Assistant.
    Starting from a fresh installation of OS X, set up a new administrator account and log in. You should now be able to enter Time Machine and restore your user data from a snapshot.* I suggest you do this in two stages. Quit all applications except the Finder before you begin.
    Restore all the visible items at the top level of your home folder.
    Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
    Any other invisible folders or files at the top level of your home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
    You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
    You'll have another problem if this is a new computer, or if you erased the startup volume: Time Machine won't continue your previous snapshot series, but will instead try to begin a new one, starting with a full copy of all files. There might not be enough space on your backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set your backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
    *If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
    Browse Other Backup Disks...
    from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of your computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
    Show Time Machine in menu bar

  • C309g disappeared from Windows 7 machine after HP update ran

    We have had a c309g attached via the LAN to a Cisco-LinkSys E3000 since December. Several computers have the printer installed, including a Dell desktop running XP SP3 (connects via LAN), a Dell laptop running Vista Business SP2 (connects wirelessly) and a Dell laptop running Windows 7 (connects wirelessly).
    Last week we got a popup advising HP updates were available and applied them (this occurred on the Windows 7 and Vista machines; not sure aboit the XP machine). After doing so, the printer was no longer accessible from the Win7 machine, and the HP Solution Center on that machine indicated the installation was not complete. The other computers were OK.
    I corrected the problem on the Windows 7 machine by going to
             All Programs -> HP -> PhotoSmart Premium c309g-m -> Add a Device
    then completing the wizard.
    The first question is, why did applying the HP updates corrupt the installation, and only on the Windows 7 machine? Have others had this problem?
    A second question is, how can I view the update history? I have no idea what got updated - was it the Solution Center or the driver (on each individual machine), or the software on the C309G itself? The web interface shows version numbers but no history information, and Solution Center doesn't even have a Help -> About option - you have to re-launch it and write the version down "real quick like a bunny" as my first COBOL instructor used to say way back when Hector was a pup (yes, he used to say that, too).

    +You can always rewrite the internal BIOS regardless which version you have now. Just make sure you checked all the settings in this program.
    Go back into the BIOS settings, then find the optical drive. Make sure it is not disabled there, select IDE-ATA or maybe SATA. Don't forget to save the settings on exit.
    After you will start the Windows, go to the Device Manager, right-click on your PC name, and select Scan for hardware changes.+
    I have tried to rewrite it with the .exe BIOS file, which I got from the official link. But when I start that file it stops, saying that the version I try to install is not newer than the actual one. If there is any other way I could use this .exe BIOS file to rewrite my BIOS, please let me know. I couldn't figure it out so far. In the old times I just made a bootable floppy disc with the BIOS files on it and it worked, never told me not to install an older version or anything like that. But now this InsydeFlash doesn't let me do that.
    I can't find the optical drive in the BIOS. Anyway, there is a setting there, so I tried to change that setting from AHCI to IDE(Compatibility), but no result.
    The Device Manager in Windows still not able to find it.
    By the way, what could that yellow light on the DVD drive mean? It turns on as soon as I switch my laptop on.
    Edit: I managed to extract the individual files from the 7-Zip .exe, I changed the flag, so it didn't check the BIOS versions anymore, then I did rewrite the BIOS to the original version (which was active when I bought the laptop), the DVD drive is not visible anywhere, everything else is fine. So I guess it is a hardware problem afterall, it wasn't a BIOS, so it has to go and get repaired.
    Message was edited by: tdquasar

  • I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

    Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant.  If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

  • IPod touch no longer playing on Sony dream machine after updating iOS

    Can not get my daughters iPod touch 4th gen to play on Sony dream machine after updating the iOS to 6.1.3. Looking for suggestions on how to fix this?!

    First go to Sony's support site. and see if there is a firmware update or other information for your dock.
    Sometimes this works:
    Reset the dock
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    Sometimes an iOS update breaks compatibility and y will hae to wait for an update to fix the problem

  • Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox

    Firefox no longer connects to internet on my mac, and windows machines, after v18. I've tried several solutions from Mozilla support and nothing works. Firefox can't even connect to Mozilla for updates. Firefox just sits on the default search page and attempts to connect to websites by typing URLs, or by clicking on the links on the default search page don't work.

    You could try the following:
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
    Let us know if this fixed your problem!

  • How can I fix repetitive 'fontd' crashes after recovery from time machine backup?

    After recovery from time machine backup (Disk Utility told me to reformat my internal hard drive) i got annoying repetitive prompts from crashing 'fontd'. How can I fix it? Anyone suffering from the same disease?

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.
    Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.

  • FaceTime won't launch after recovery from time machine backup

    I cannot get FaceTime to launch after I recovered my machine from a Time Machine backup. I keep getting the following error:
    9/3/14 7:57:13.688 PM xpcd[2535]: FaceTime[33694]: registration request failed: (0x11, 0x0) NSCocoaErrorDomain:513 You don’t have permission to save the file “com.apple.logging.08E5E277-0C04-57A1-B16A-FB9E89747C91.plist” in the folder “ByHost”. createSymbolicLinkAtPath:withDestinationPath:error: WR/DST: ~/Library/Containers/com.apple.FaceTime/Data/Library/Preferences/ByHost/com.app le.logging.08E5E277-0C04-57A1-B16A-FB9E89747C91.plist 0 stat: 13 -1 o:Root m:040700 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000 -2 o:User m:040700 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000 -3 o:User m:040700 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000 -4 o:User m:040700 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000 -5 <CONTAINER> o:User m:040700 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000 -6 o:User m:040700 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000 -7 <LIBRARY> o:User m:040700 f:hidden fs: hfs, fsid: 1000002/11, mf: 0480d000 !#acl 1 group:ABCDEFAB-CDEF-ABCD-EFAB-CDEF0000000C:everyone:12:deny:delete -8 <HOME> o:User m:040755 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000 !#acl 1 group:ABCDEFAB-CDEF-ABCD-EFAB-CDEF0000000C:everyone:12:deny:delete -9 o:Root m:040755 f:() fs: hfs, fsid: 1000002/11, mf: 0480d000
    Anyone know what this is about?
    I'm running OS X on a 2.7GHz i5 with 16GB of RAM on a iMac platform.
    I've tried to re-instal OS X, but that didn't help me at all. It didn't even change the error message.
    Thanks for the help apple community - Take care.

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Folders locked in Time Machine after changing hard drive

    2008 iMac running Lion 10.7.5
    I have had a larger hard drive installed on my iMac and all the data migrated to the new drive.
    Time Machine has done a complete new backup but I can't access any of the older backups on Time Machine from the old hard drive.
    The error I get trying to open any folder in TM prior to today is (Movies is an example)
    The folder “Movies” can’t be opened because you don’t have permission to see its contents.
    My local Apple expert states that - "The backups get protected using the Hardware UUID of the hard drive. In your case, your old backups are protected using the UUID from the old hard drive. OS X is supposed to 'adopt' the old backup once it confirms that the data is the same as what is on the new drive. However, it doesn't always work."
    I have since found a workaround on techsurvivors - by changing the permissions in Finder/Get Info on the Time Machine Drive ie
    Open Time Machine drive in Finder
    Do get info on any locked folder for specific backup date.
    Unlock it but do not close the Get Info window.
    Click on the black plus sign in the lower left corner of the Get Info window.
    Click on the administrators or your account if it is bolded, then the Select blue button.
    Click on the little arrows to select "Read and Write" for the account.
    After doing this on one folder - Movies - for one backup ie June 11 2013 I was able to restore some movie files using Time Machine as normal.
    I don't really want to have to repeat this for all the locked folders for every backup.
    Is there an easier way to change the protection of the backups on the Time Machine drive? Or am I stuck with this workaround.
    Thanks

    Uhhh...
    The "Family Pack" is not for sharing among friends. It is for family members in the same physical household. Read the license agreement.
    You need the DVD. This might be a great opportunity to go buy one for yourself, and to get legitimate, and stop stealing software.

  • Problems w/Time Machine after logic board replaced

    Early January 2013 Apple replaced my logic board in my MacBook Pro.  Just the other day I had a reason to go the first of February 2013 to find something in My Documents.  There was NOTHING in Time Machine after January 3rd!  When I got my computer back I noticed My Passport icon was yellow.  Didn't know what that meant--but now I see probably something! 
    In trying to fix this problem I followed an Apple instruction which backed up SOMETHING ... but not in Time Machine because now there is nothing in it!  The instruction was under the heading "Attempt to repair your Time Machine's backup - using an external hard drive to store backups."
    I would very much appreciate some direction to try to fix this.  THANK YOU!

    Hello again:  Following the link above, I didn't see the examples that were shown so I put "Migration Assistant" in spotlight, it appeared and I followed what looked to be like what I should be doing .  It took about a half hour.  I really don't know what it was doing, other than Time Machine seems to be working again.  But where are all the things it was transferring for a half hour?  I am totally confused but just hope My Passport is still okay -- and that I don't really have to have anything from the past!
    Thank you.

  • How to restore files from Time Machine after Clean Install of Mavericks

    How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?

    Hi Linc,
    my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
    When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD.  February 7th  2014 was the date of the clean install.
    These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
    Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
    Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
    I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
    Sigi

  • Adobe PDF Preview Handler Issue in WIndows 8 64 Bit Machine - After installing Adobe Pro 11.0.10

    Hi Guys ,
    We are facing a serious issue with Windows 8 and Adobe PDF Preview Handler . We are using the PDFPrevHndlr.dll from Adobe to show PDF Previews in our application. It is working fine in Windows 7 and Vista and for some reason it is not working in Windows 8.1 64 bit machines after upgrading to Adobe Pro 10.0.10 .  Please help us figure out what is the root cause of this issue .
    During a close analysis we have found that the PrevHost.exe( Windows component ) is failing soon after it is being invoked . Any help in this is much appreciated.
    Regards
    Sree

    Hi Sree,
    According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
    https://forums.adobe.com/community/adobe_reader_forums
    By the way, after do some search, it seems not working for 64bit machine,
    >> It is working fine in Windows 7 and Vista
    Also work fine in win7/vista 64bit????
    If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this?

    I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this? It keeps telling me that there are missing files, too. If I upgrade to Elements 12 or beyond, will this fix the problem?

    You can't sign in because there is nothing to sign in to. For PSE 10 the only sign in was to photoshop.com, which has been dead and gone for a year and half. Just skip the sign in. Reinstalling will not change this.
    PSE 8, 9, 10 Can’t Sign In, Error 404 | Barbara's Sort-of-Tech Blog
    PSE is locking up because it's looking interminably for the non-existent photoshop.com server.

Maybe you are looking for