Installation of ODTwithODAC1110621 fails on Windows Vista

In order to get a Oracle OLE DB provider for .Net, I installed downloaded ODTwithODAC1110621.zip from the Oracle.com website. It installs fine on Windows XP, but when I try an install in Vista, it ends just a minute after the start with a message box entitled Java Virtual Machine launcher
"Cannot find main class. The program will now exit".
(This is at the point of preparing the installation - it shows a command prompt (DOS) window and says wait ...., then it says cannot find xxx something or other and gives the above message).
The Oracle database 11g is supposed to run on Vista, even 10g does, and the above data provider should run on Vista too.
I do need to install it on Vista. Any help appreciated.
Peter

Hello Friends,
I have been unable to download the patch for developer 10g forms as I am not a metalink registered user. But I have downloaded other browsers such as firefox2 and netscape 9.0.0.6. I am trying to run my forms 10g rel2 with these browsers. But on netscape it says Java is not enabled, even though I have enabled Java. And it shows me a grey page. On firefox 2, it says 'click here to download plugin'. After you click on it, it says 'No suitable plugins were found', 'Unknown plugin(application x/jinit-applet; version 1.3.1.22) and a text box is beside it labelled 'Manual Install'. When you click on this manual install button, it takes me to this page :
http://ajayia-pc:8889/forms/jinitiator/us/jinit_download.htm.
Please can anyone help with advice as to what direction to go. I am stuck with my installation. I am using Windows Vista Operating System.
Many Thanks.
Cheers
Aj

Similar Messages

Installation failed with Windows Vista and JDK1.602

Hi All,
Appreciate any help to resolve the following installation error on my Windows Vista system with JDK1.602
Pop-up Error Message:
The installer is unable to run graphical mode. Please check the value of the DISPLAY environment varibale.
Thanks,
CP

JSE8.1 (based on NetBeans 5.0) is not supported on Vista. You may want to consider using the latest NetBeans 5.5.1. (NetBeans is where all future development is planned for).
http://forum.java.sun.com/thread.jspa?threadID=5192837
From the release notes of NB551:
# Issue #85361: NetBeans 5.5 installer does not start on Windows Vista.
    Description: On systems running Windows Vista, the NetBeans 5.5 installer fails to start
and a message suggesting running with the "silent" or "console" flag appears.
    Workaround: To correct this, run the installer on JDK 6.0 build 96 or newer.
    If you encounter further difficulties, disable Compatibility Mode manually. You can do
this by right-clicking the .exe installer file and choosing Properties from the pop-up menu,
then deselecting Compatibility Mode in the Compatibility tab of the File Properties dialog.
Note that if Compatibility Mode was turned on automatically, it is necessary to disable it
for both the current user AND all users. To do so, click the "Show Settings for All Users"
button, then deselect the Compatibility Mode checkbox in the "Compatibility for All Users"
dialog.You can try the same workaround for installing jse8.1, to see if that works. But, it is an older version that is not supported on vista and hence my suggestion to consider a later version of NB.

Installation of Forms 10g on Windows Vista

Hello All
I am also looking for the patch 7047034 and the OPatch as I am not a registered metalink user. Pls help by anyone will be highly appreciated.My email address is [email protected] I reside in UK, London and my forms rel2 10.1.2.0.2 installation is stuck without these patches, i need to upgrade to 10.1.2.3 pls help, anybody. I am stuck! Thanks in advance.
Cheers
Aj
Edited by: user9925154 on 02-Mar-2010 15:40

Hello Friends,
I have been unable to download the patch for developer 10g forms as I am not a metalink registered user. But I have downloaded other browsers such as firefox2 and netscape 9.0.0.6. I am trying to run my forms 10g rel2 with these browsers. But on netscape it says Java is not enabled, even though I have enabled Java. And it shows me a grey page. On firefox 2, it says 'click here to download plugin'. After you click on it, it says 'No suitable plugins were found', 'Unknown plugin(application x/jinit-applet; version 1.3.1.22) and a text box is beside it labelled 'Manual Install'. When you click on this manual install button, it takes me to this page :
http://ajayia-pc:8889/forms/jinitiator/us/jinit_download.htm.
Please can anyone help with advice as to what direction to go. I am stuck with my installation. I am using Windows Vista Operating System.
Many Thanks.
Cheers
Aj

Mac OS X Leopard installation disc after I install Windows Vista

Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!

Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!
Yes you will need to install the apple drivers for win vista. When you boot from a cold start, have you tried holding down the option key to choose which OS to boot from? If you have then, you could try going into startup options from the mac side and choose win vista if it appears. That could be risky though, as you mentioned you do not have the mac install disk. If problems arise you may need the mac install disk to undo the changes.

HT4796 Does anybody know why migration assistant fails in windows vista?

Does anybody know why migration assistant fails in windows vista?

rank2, welcome to the forum,
PS: Is Europe/Germany as location ok? The rules don't mention how location should look like
That's great, thanks.
"Country Location - Members should denote their country location in their personal profile. Location is important when offering advice, as sales, service, and product options may not be consistent country to country."
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Itunes install fails on windows vista

I had done an update to iTunes some time ago. It failed. I tried all the methods to fix it and in the end removed iTunes, Quicktime, etc. I have removed the programs. deleted the directories and cleaned the registries of the misc entries (using RegCure) rebooting in between each step.
the exact message is "Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services.
I only have one user made on the machine - which is of course admin. I have tried changing ownership and permissions on the iPod directory after it is created all to no avail.
Please just don't link the the "remove iTunes from a windows vista machine" thread. I have run the MS cleanup utility also. I have tried all kinds of things people have suggested and so far none have worked. PLEASE help me.

I had used msconfig and aggressively turned off startups and services. I had not done it after a fresh uninstall and cleanup and reboot though. Just the reboot as part of applying the changes made and trying to reinstall iTunes. I had just completed that to no avail.
So what I just tried was as follows:
1. Uninstalled all Apple software including QuickTime, Bonjour, Software Updater and Mobile Device Support using the Apple guide.
2. Rebooted.
3. Ran RegCure to remove misc registry entries no longer associated with iTunes, etc.
4. Ran MS Installer Cleanup Wizard.
5. Deleted any remaining Apple directories in c:\Program Files.
6. Rebooted.
7. Ran msconfig and aggressively deselected startups and services. Ensured iTunes and iPod where selected. Ensured selective startup was selected.
8. Rebooted.
9. Downloaded and reinstalled iTunes.
10. Received the same failure notices - the failed to start one and if i tried to start the iPod service manually through the service manager, failed to respond in a timely manner message. The events log for the iTunes install error is "A timeout was reached (30000 milliseconds) while waiting for the iPod Service service to connect." and the event log for the manual start from the service manager attempt is: "The iPod Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
11. Changed permissions for all entries in the permissions list to full control.
12. Tried reinstall - failure.
13. Took ownership of c:\program files\ipod directories and files.
14. Tried reinstall - failure.
15. To make sure I tried the install two times - once with my iPod connected and once without.
16. Wrote this entry in the forums.
Previously I had tried the new admin user you had suggested.

Installation problem in 10g on windows vista

my system's OS is window vista. when i installed oracle 10 g then it is install easily and also working , but after reopen the system then it(oracle 10 g) is not working. gives different type error
just like
"listener does not currently know of service requested in connect descriptor"
i checked all service " those are working"

installation oracle 10g

Sap b1 setup failed on Windows Vista -Home edition

Hi experts,
I installed SQL-2005 on windows vista home edition and also installed SAP B1-2007B-PL09 but it shows error connection with License server failed and SAP B1 service manager-License Manager 2007 are also disable .so my question is it SAP b1 support Windows vista-home edition.pl suggest me solution.
Regards,
Sudhir pawar

Sudhir,
Windows Vista home edition is not a supported Operating system.
That being said, the reason that your license manager is not enabled is more than likely not due to this fact.
Close the server tools, and relaunch but this time right-click and 'run as administrator' this should enable all the options and allow the license server to start.
You may also want to view the system requirements PDF available in the SAP B1 document resource center, this should give you some insight into supported platforms.
I hope this helps,
Lucas

Live Update 3 will fail on Windows Vista Home Premium

Hi,
I have a P6N Diamond motherboard with BIOS 1.0, in a Windows Vista Home Premium system
I have downloaded Live Update 3 and tried to run it. I get various error messages one after another: "driver not valid", "Flash_MMIO_MAP DeviceIoControl error", etc, and then I have to close down Internet Explorer to be able to get back to a normal situation in the system.
Can you please let me know how to update the BIOS?
Thanks.

Go in BIOS and make sure USB Legacy Support is Enabled(can be named USB KB/Storage Support), re-try to boot from your USB key again.
If no change:
Use HP Formatter(http://www.pctipp.ch/downloads/dl/32594.asp) to change USB key geometry, format the USB key in FAT32 via HP Tool.
/* some USB keys are picky, and they need a special conditional to boot from it, Forum Tool is using the existing drive parameters */
Then re-run Forum Tool, when its done reboot PC and boot again from it.

Installation of oracle 10gR2 on Windows Vista Home Premium 64 bit OS

can we install oracle 10gR2 on Windows Vista Home Premium 64 bit OS ???
While doing sqlplus from command prompt,
it's giving error like
'SP2-1503 Unable to initialise Oracle Call interface'
'SP2-0152 Oracle may not be functioning Properly'
How to troubleshoot the above errors,
Has anybody tried it ???
Plz assist.

No Oracle product is certified against any Windows Home OS.
As Vista was released after Oracle 10gR2, 10gR2 is not certified against any edition of Vista.
You need to downgrade to XP, or install Linux.
Sybrand Bakker
Senior Oracle DBA

Query regarding installation of SOA Suite on Windows Vista 64 Bit

Hi,
I would like to setup a development enviroment having Oracle SOA Suite 10g and Oracle Database Server 10g on my laptop. Please can anyone clarify whether these softwares are compatible with a laptop of below mentioned configuration:
===========================================================HP Pavilion dv9700t Notebook PC
Windows Vista Home Premium with Service Pack 1 (64-bit)
Intel(R) Core(TM) 2 Duo Processor T5750 (2.0 GHz)
17.0" diagonal WSXGA+ High-Definition HP BrightView Widescreen Display (1680 x 1050)
3GB DDR2 System Memory (2 Dimm)
256MB NVIDIA GeForce 8400M GS
320GB 5400RPM SATA Hard Drive
===========================================================
I have gone through the compatibility matrix. However, the compatibility matrix mentions that Oracle software is compatible with EM64T processor.
Request clarification on whether an Intel(R) Core(TM) 2 Duo Processor T5750
(2.0 GHz) belongs to EM64T family or not.
Thank you.
Regards,
Balu

Didn't you read the posts in your other thread? Several people told you what needed to be done.

Reader v11 Update fails on Windows Vista (entire network) with error 1310

Tried to run the Reader v11 updater after installing v11. It fails comsistently with error 1310, although the file in the error message is different each time. The file is usually, but not always, in the folder config.msi.
We had this problem in the Reader v10 updaters as well, however we traced it to a race condition in file handling. We could get it to install by running other programs concurently or disabling anti-virus, to alter the timing of the install. Usually it took 3 to 6 attempts for it to complete successfully.
With the v11 updater, no amount of iterations will get it to install. We've tried upwards of 20 times. We've also tried re-installing v11 and then applying the update over a fresh copy. That does not work either. The usual tricks that worked with v10 also do not work with v11.
This problem could be solved easily if the updater would prompt the user for a retry on error, instead of automatically rolling back. For the main installer, the user is prompted to retry, but not for the updater. We run plenty of installers in the school without problems, but the Reader updates are always difficult.
We have wasted dozens of hours on this in our school. We are supposed to keep the Reader patched to avoid the significant vulnerabilities it introduces, but we cannot get the updater to run. If anyone else has solved this problem please let us know.

Lorraine, I posted a question in the Adobe Reader forums about the
problems we have with the updaters. I got back this response, they
are blaming it on other software and the Windows Installer. I think
that can't be true, we install all kinds of stuff without problems.
So I think the truth is they've done a crappy job on their updaters.
The latest update is for an extremely serious vulnerability, it's
active in the wild and has made the national news. So if we can't
install the update, then I think we have to move away from Adobe
altogether, to another reader.
Can you think of any reason not to do this?

"Corrupt Installation Detected" Nidaq693.exe on windows vista

I'm having problems running Nidaq693.exe on vista (labview 8.2). I have the only account on the machine and therefore everything have privilige to install whatever I like. I've tried running it in compatibility mode and using the "run as admin" option to no avail. I ran it on a different pc including the associated LV61Eng.exe then copied it across to this machine. The installer then returns the following error "Error 1335. The cabinet file 'daqdriver.cab" required for this installation is corrupt and cannot be used. This couldindicate a network error, an error reading from the CD-ROM, or a problem with this package." Any ideas or solutions would be appreciated.
Thanks,
Matt

As you can see on the download page, 6.9.3 is not supported on Vista. None of the traditional DAQ drivers are supported under Vista. Vista required vendors to rewrite their drivers and since the traditional DAQ drivers are obsolete, NI made the decision not to spend the time porting them over to Vista. If you have a card supported with DAQmx, then you can use that. Otherwise, you will have to change your OS or get a DAQ board that is supported with DAQmx.

Installation error - photoshop CS4 on windows vista 64 bit

Hi guys
after doing all the ideas in my previous post , I'm now with this error messege while installing the trial version of Adobe photoshop CS4
then after finishing the installation I've tried to start the software so I've get another msg
please tell me what to do

Didn't you read the posts in your other thread? Several people told you what needed to be done.

Help with installation of Illustrator (CS3 on Windows Vista)

I downloaded Illustrator onto my laptop, but when I go and try and nstall it, it gives a message saying: installation cannot continue until the following applications are closed: internet explorer.
Please close the applications listed above and click 'try again' to continue the installation.
The thing is that I do close IE!! I've tried re-starting, pressing CTRL + ALT + DEL, but nothing works! I am seriously desperate. What is the problem and how do I go about fixing it? I need Illustrator installed.
Mere

I do not know your exact problem and I do not know if this is going to do the job but for what it is worth. Uninstall IE restart your computer then install AI. Then reinstall IE.
As I say I do not know if this would work but it might be worth a try.

Installation of ODTwithODAC1110621 fails on Windows Vista

Similar Messages

Maybe you are looking for