Installation of Oracle 8.1.17 on Redhat Linux Enterprise Edition 2.4
dear all
I have tried to Oracle 8.1.17 on Redhat Linux Enterprise Edition 2.4 but it gives an error "Error in invoking target make file .."
I tried using retries it failed each time to prorceed.
I checked for my binutils ( binutils-2.14.90.0.4-26 ) but mine are higher than binutils-2.11.90.0.8-13.i386.rpm required ..
do i need to down grade my binutils for 8.1.7
abhi
Hi Abhi!
If I remember correctly (817 is stone age) the binutils used a strange debug flag in the 2.11.90.0.8-13 (something with -z).
If this is not present in your newer version of the binutils the make will fail.
Try downgrading the binutils during the installation.
cu
Andreas
Similar Messages
-
Problems in Pro*C installation for Oracle 8.1.7 on Redhat Linux 6.2
Hello,
I have installed Oracle 8.1.7 on Redhat Linux 6.2. After installing Proc and doing necessary changes in pcscfg.cfg file. I tried to compile demo programs. But I am getting following error while compiling.
Syntax error at line 368, column 19, file /usr/include/libio.h:
Error at line 368, column 19 in file /usr/include/libio.h
extern IOsize_t IOsgetn __P ((_IO_FILE *, void *, IOsize_t));
..................1
PCC-S-02201, Encountered the symbol "_IO_sgetn" when expecting one of the follow
ing:
; , = ( [
The symbol ";" was substituted for "_IO_sgetn" to continue.
I have tried changing paths, but still the error persists. If I do following change in sample file. The program is getting compiled.
#ifndef ORA_PROC
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <sqlda.h>
#include <sqlcpr.h>
#endif
Can anyone suggest how can I get successful compilation without ORA_PROC usage.
Thanks & Best Regards,
Swati Deval.Hello,
I tried to install Oracle 8.1.7 on Redhat Linux WS 2.1 and here is the make.log
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome1
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome1/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome1/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome1/lib ;\
/usr/bin/ar rv /home/oracle/OraHome1/lib/libn8.a /home/oracle/OraHome1/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
Any idea? -
Redhat Linux Enterprise edition 6.4
Hi folks,
please can one suggest me where can i download redhat linux 6.4 for training purpose.thanks
Regards.AmitGargOCE wrote:
There are lots of Torrent Download available for redhat linux 6. Just search in google. Agree with Dude! to use OEL6 for learning. It is almost same.
Thanks
Amit
And they are each and every one illegal.
Use OL6 (the 'E' was dropped years ago), which is current and free for any purpose. -
Installation of Oracle 8.1.6 on RedHat Linux 7.1
Hello,
How are you?
I am facing some problem to install Oracle 8.1.6 on my own pc on
os Linux 7.1.
I can start installer.Its installing but after 72% installation
complited than its gives following errors.
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/sqlplus/lib/ins_sqlplus.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/network/lib/ins_net_client.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/precomp/lib/ins_precomp.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/ldap/lib/ins_ldap.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/network/lib/ins_net_server.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/network/lib/ins_oemagent.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/odg/lib/ins_odg.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/otrace/lib/ins_otrace.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/plsql/lib/ins_plsql.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/rdbms/lib/ins_rdbms.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/rdbms/lib/ins_rdbms.mk
error in invoking target install of makefile
/u01/app/oracle/product/8.1.6/ctx/lib/ins_ctx.mk
After that it shows INSTALLATION COMPLETE SUCCESSFULLY.And
Network Configuration Assistant
has start. Its hang the computer
In log shows error this
Error loading native library libnjni8.so
java.lang unsatisfied ink error:jniGetOracleHome
I stop the same.Than Database Assistant and Creation of database
start.It is complete without
any error.
But when I tried to start svrmgrl its show following error
svrmgrl:error while loading shared libraries:libwtc8.so;cann't
load shared object
Please sir,
Lets give me right direction for these difficulties.I am so much
interested to install same on
my pc.Please do needful.If you are interested to give me direct
answer than my mailid is
[email protected]
Thanking you in advance
Yours truly,
Gitesh Trivedi.Hi Gitesh,
I face exactly the same problems as you face....
no whatsoever difference...and i am completely stuck as i dont
know what to do...
i have heard from some people (on the oracle discussion groups)
that they have successfully installed oracle8.1.6
how i dont know... but very much eager if any of you all could
help me out.
if you do find a way out and solve the problem ...do plz. let me
know....
akshay. -
Install of oracle 8.1.6 on redhat linux
i installed oracle 8.1.6 on redhat linux 7.0
after installation while creating a default
database it is taking lot of time,
i tried to create one more database using database assistant it is also taking lot of time initialize i don't know how to set virtual memaory which we will set in win-nt
please write me anyone who know the problem...
nullDear:
My English is bad, but I think you will understand me what I
saying.I show what i did in my computer system.
First: I download i386-glibc-2.1-linux.tar.bz2,
readme.oracle8i from
ftp://ftp.ca.kernel.org/pub/software/libs/glibc/hjl/sdk/2.1
and
Second : I read the file readme.oracle8i,and do what it
said.
It's ok to solve the problem.
Good Luck. -
Is Oracle 8 EE available for REdhat Linux 6.0
Would anyone know whether Oracle 8 EE available
for REdhat Linux 6.0 ? Also, what is the fundamental
difference between the standard edition, Oracle 8 and Oracle 8i
for Linux (briefly).
Thanks
Eashwer
nullEashwer Iyer (guest) wrote:
: Would anyone know whether Oracle 8 EE available
: for REdhat Linux 6.0 ? Also, what is the fundamental
: difference between the standard edition, Oracle 8 and Oracle 8i
: for Linux (briefly).
: Thanks
: Eashwer
Oracle 8i for Linux 2.2 kernels (using glibc 2.1) is supposed to
be out the first part of June. I don't know what they will do
about 8SE and 8EE. Maybe supply patches? Anyway, Oracle is
aware of the problems associated with glibc 2.1 and is working on
it.
I installed Caldera Openlinux 2.2 and used a previously installed
Oracle 8EE installation. So far, it is working. I believe they
have said that it should work, but you may encounter a few
errors.
I believe that Oracle 8EE adds Partitioning and Objects. 8i is
made for use with the internet and allows you to create stored
procedures in Java. I have never used the product, but that is
my understanding of it.
I hope this helps.
null -
Installing Oracle 8.1.7 on RedHat Linux WS 2.1
Hello,
I am trying to install Oracle 8.1.7 on Linux WS 2.1 and I am getting an error saying Error in invoking target ´ntcontab.o´ of makefile
and if I try to ignore I am getting a whole of error along these lines .. Please let me know how to resolve this issue. see below for my make.log file
Your help is highly appreciated!
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennfgt > nnfgt.c ;\
cc -c nnfgt.c ;\
rm -f /home/oracle/OraHome2/lib/nnfgt.o ;\
mv nnfgt.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/nnfgt.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `nnfgt.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [nnfgt.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_precomp.mk links
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLCA.H)
(cd /home/oracle/OraHome2/precomp/public ; rm -f ORACA.H)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLDA.H)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLCA.COB)
(cd /home/oracle/OraHome2/precomp/public ; rm -f ORACA.COB)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLCA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; rm -f ORACA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; rm -f BNDDSC.FOR)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SELDSC.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlca.h SQLCA.H)
(cd /home/oracle/OraHome2/precomp/public ; ln -s oraca.h ORACA.H)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlda.h SQLDA.H)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlca.cob SQLCA.COB)
(cd /home/oracle/OraHome2/precomp/public ; ln -s oraca.cob ORACA.COB)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlca.for SQLCA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s oraca.for ORACA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s bnddsc.for BNDDSC.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s seldsc.for SELDSC.FOR)
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennfgt > nnfgt.c ;\
cc -c nnfgt.c ;\
rm -f /home/oracle/OraHome2/lib/nnfgt.o ;\
mv nnfgt.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/nnfgt.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `nnfgt.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [nnfgt.o] Error 127
/usr/bin/make -f ins_nau.mk nautab.o ORACLE_HOME=/home/oracle/OraHome2 NAU_ADAPTERS="KERBEROS5 IDENTIX SECURID RADIUS "
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/genautab "KERBEROS5 IDENTIX SECURID RADIUS " > nautab.c ;\
cc -c nautab.c ;\
rm -f /home/oracle/OraHome2/lib/nautab.o ;\
mv nautab.o /home/oracle/OraHome2/lib ; fi)
/bin/sh: cc: command not found
mv: cannot stat `nautab.o': No such file or directory
make: *** [nautab.o] Error 1
/usr/bin/make -f ins_rdbms.mk part_on ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: /usr/bin/ar: No such file or directory
/usr/bin/ar cr /home/oracle/OraHome2/rdbms/lib/libknlopt.a /home/oracle/OraHome2/rdbms/lib/kkpoban.o
make: /usr/bin/ar: Command not found
make: *** [part_on] Error 127
/usr/bin/make -f ins_rdbms.mk sdo_on ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: /usr/bin/ar: No such file or directory
/usr/bin/ar cr /home/oracle/OraHome2/rdbms/lib/libknlopt.a /home/oracle/OraHome2/rdbms/lib/kxmwsd.o
make: /usr/bin/ar: Command not found
make: *** [sdo_on] Error 127
/usr/bin/make -f ins_rdbms.mk ctx_on ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: /usr/bin/ar: No such file or directory
/usr/bin/ar cr /home/oracle/OraHome2/rdbms/lib/libknlopt.a /home/oracle/OraHome2/rdbms/lib/kciwcx.o
make: /usr/bin/ar: Command not found
make: *** [ctx_on] Error 127
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/home/oracle/OraHome2
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/home/oracle/OraHome2
/home/oracle/OraHome2/bin/genclntsh
/home/oracle/OraHome2/bin/genclntsh: ld: command not found
genclntst: error: could not locate /home/oracle/OraHome2/lib/clntsh.map
please generate the client shared library first
/home/oracle/OraHome2/bin/genagtsh /home/oracle/OraHome2/lib/libagtsh.so 1.0
/home/oracle/OraHome2/bin/genagtsh: ld: command not found
/usr/bin/make -f ins_sqlplus.mk install ORACLE_HOME=/home/oracle/OraHome2
rm -f sqlplus
Linking sqlplus
rm -f sqlplus
gcc -o sqlplus -L/home/oracle/OraHome2/sqlplus/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/sqlplus/lib/s0afimai.o -lsqlplus -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm -lpthread `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lpthread
/bin/sh: gcc: command not found
make: *** [sqlplus] Error 127
/usr/bin/make -f ins_oemagent.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -o dbsnmp s0nmi.o -lclntsh -lvppdc \
-lnmi -lnmd -lnms -lnmsp -lpeer \
/home/oracle/OraHome2/network/lib/libtcl.a /home/oracle/OraHome2/rdbms/lib/defopt.o /home/oracle/OraHome2/rdbms/lib/ssdbaed.o -lclient8 \
-ltrace8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lcrypt -ldl -lm -lm
/bin/sh: gcc: command not found
make: *** [dbsnmp] Error 127
/usr/bin/make -f ins_precomp.mk relink ORACLE_HOME=/home/oracle/OraHome2 EXENAME=ott
Linking ott
/bin/sh: gcc: command not found
/bin/chmod: getting attributes of `ott': No such file or directory
make: *** [ott] Error 1
/usr/bin/make -f ins_net_client.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
/home/oracle/OraHome2/bin/echodo gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -o trcasst /home/oracle/OraHome2/network/lib/s0nue.o -lntal8 \
-lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib /home/oracle/OraHome2/rdbms/lib/defopt.o
gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -o trcasst /home/oracle/OraHome2/network/lib/s0nue.o -lntal8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -ldl -lm -lpthread -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib /home/oracle/OraHome2/rdbms/lib/defopt.o
/home/oracle/OraHome2/bin/echodo: gcc: command not found
make: *** [trcasst] Error 127
/usr/bin/make -f ins_plsql.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
rm -f wrap
Linking wrap
gcc -o wrap -L/home/oracle/OraHome2/plsql/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/plsql/lib/s0plsw.o -lpsa8 -lpls8 -lplp8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm /home/oracle/OraHome2/lib/libplc8.a -lpls8 -lclient8 -lnl8 -lnro8 -ln8 /home/oracle/OraHome2/rdbms/lib/kpudfo.o -lmm -ltrace8 -lgeneric8 -lcommon8 -lslax8 -lcore8 -lnls8 -ldbicx8 -lcore8 -lsql8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm
/bin/sh: gcc: command not found
make: *** [wrap] Error 127
/usr/bin/make -f ins_ldap.mk toolsinstall ORACLE_HOME=/home/oracle/OraHome2
rm -f ldapadd ldapbind ldapcompare ldapdelete ldapmodify ldapsearch ldapmoddn ldifwrite oidpasswd oidreconcile ldapaddmt ldapmodifymt
rm -f datagen bulkmodify
Building client shared library libclntsh.so ...
Call script /home/oracle/OraHome2/bin/genclntsh ...
/home/oracle/OraHome2/bin/genclntsh
/home/oracle/OraHome2/bin/genclntsh: ld: command not found
genclntst: error: could not locate /home/oracle/OraHome2/lib/clntsh.map
please generate the client shared library first
Built /home/oracle/OraHome2/lib/libclntsh.so ... DONE
gcc -o ldapadd -L/home/oracle/OraHome2/ldap/lib/ -L/home/oracle/OraHome2/lib/ -o ldapadd -L/home/oracle/OraHome2/ldap/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/ldap/lib/s0gslmod.o -lncrypt8 -lldapclnt8 -lncrypt8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/bin/sh: gcc: command not found
make: *** [ldapadd] Error 127
/usr/bin/make -f ins_net_server.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
/home/oracle/OraHome2/bin/echodo gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -Wl,-rpath,/home/oracle/OraHome2/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -o tnslsnr /home/oracle/OraHome2/network/lib/s0nsgl.o /home/oracle/OraHome2/network/lib/snsglp.o \
-lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -lpeer -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -Wl,-rpath,/home/oracle/OraHome2/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -o tnslsnr /home/oracle/OraHome2/network/lib/s0nsgl.o /home/oracle/OraHome2/network/lib/snsglp.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -ldl -lm -lpthread -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -lpeer -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/home/oracle/OraHome2/bin/echodo: gcc: command not found
make: *** [tnslsnr] Error 127
/usr/bin/make -f ins_rdbms.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
rm -f oracle mig dbv tstshm maxmem orapwd dbfsize cursize svrmgrl extproc hsalloci hsots hsdepxa osh sbttest imp exp sqlldr rman kgmgr loadpsp /home/oracle/OraHome2/rdbms/lib/ksms.s /home/oracle/OraHome2/rdbms/lib/ksms.o
rm -f /home/oracle/OraHome2/rdbms/lib/nmliblist
/bin/sh: /usr/bin/ar: No such file or directory
/bin/sh: cc: command not found
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [home/oracle/OraHome2/rdbms/lib/config.o] Error 127
/usr/bin/make -f ins_nau.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
rm -f oklist okinit okdstry
/home/oracle/OraHome2/bin/echodo gcc -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist snauk5pt.o s0nauk5l.o nauk5zl.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
gcc -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist snauk5pt.o s0nauk5l.o nauk5zl.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -ldl -lm -lpthread -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/home/oracle/OraHome2/bin/echodo: gcc: command not found
make: *** [oklist] Error 127
/usr/bin/make -f ins_otrace.mk install ORACLE_HOME=/home/oracle/OraHome2
- Linking otrcfmt
rm -f otrcfmt;
gcc -o otrcfmt -L/home/oracle/OraHome2/otrace/lib/ -L/home/oracle/OraHome2/lib/ -o otrcfmt -L/home/oracle/OraHome2/otrace/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/otrace/lib/otrcfmt.o -ltracefe8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 \
`cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -ltracept8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 /home/oracle/OraHome2/rdbms/lib/defopt.o \
-lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm /home/oracle/OraHome2/rdbms/lib/libknlopt.a -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/bin/sh: gcc: command not found
make: *** [otrcfmt] Error 127
/usr/bin/make -f ins_rdbms.mk utilities ORACLE_HOME=/home/oracle/OraHome2
- Linking Import utility (imp)
rm -f /home/oracle/OraHome2/rdbms/lib/imp
gcc -o /home/oracle/OraHome2/rdbms/lib/imp -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/rdbms/lib/impdrv.o /home/oracle/OraHome2/rdbms/lib/ssdbaed.o /home/oracle/OraHome2/rdbms/lib/defopt.o /home/oracle/OraHome2/rdbms/lib/libdbtools8.a -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` `if [ -f /usr/lib/libsched.so ] ; then echo -lsched ; else true; fi` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` `if [ -f /usr/lib/libsched.so ] ; then echo -lsched ; else true; fi` -ldl -lm -ldl `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lsql8 -lsql8
/bin/sh: gcc: command not found
make: *** [home/oracle/OraHome2/rdbms/lib/imp] Error 127
/usr/bin/make -f ins_rdbms.mk ioracle ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: cc: command not found
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [home/oracle/OraHome2/rdbms/lib/config.o] Error 127
/usr/bin/make -f ins_ctx.mk install ORACLE_HOME=/home/oracle/OraHome2
gcc -o ctxload -L/home/oracle/OraHome2/ctx/lib/ -L/home/oracle/OraHome2/lib/ -o ctxload -L/home/oracle/OraHome2/ctx/lib/ -L/home/oracle/OraHome2/lib/ drz.o -lctxs8 -lctx8 -lzx8 -lgx8 -lctx8 -lzx8 -lgx8 /home/oracle/OraHome2/rdbms/lib/defopt.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/bin/sh: gcc: command not found
make: *** [ctxload] Error 127Hello,
I tried to install Oracle 8.1.7 on Redhat Linux WS 2.1 and here is the make.log
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome1
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome1/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome1/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome1/lib ;\
/usr/bin/ar rv /home/oracle/OraHome1/lib/libn8.a /home/oracle/OraHome1/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
Any idea? -
Silent installation of oracle 10.2.0.5 on Linux 5
Please anyone guide me for the steps of silent installation of oracle 10.2.0.5 on Linux 5. Please provide me the link if any.
Hi;
Please anyone guide me for the steps of silent installation of oracle 10.2.0.5 on Linux 5. Please provide me the link if any.You mention to install oracle 10.2.0.5 client or patch on Linux?(What is linux5? version,its 32 bit or 64 bit)
If yes than its mean you are already on 10.2.0.x level. Because 10.2.0.5 is a patch check
10.2.0.5 Patch Set - Availability and Known Is [ID 1087991.1 ]
For installation you need to check readme part of patch
If you mention client installation than check:
10.2.0.5 client
Re: Oracle 10g 10.2.0.5 Installation
Regard
Helios -
How compile OCCI Demo of Oracle 9i with gcc on Redhat Linux 9?
How compile OCCI Demo of Oracle 9i with gcc on Redhat Linux 9?
When I use gcc-3.22 compile,error:undefined reference to 'typeinfo for oracle:occi:SQLException'.
Reputedly gcc-2.95 or gcc-2.96 is the official supported version , did you try it?
Can you help me compile it successfully?
Thank you!
Alex ClarkFor details
compile cmd:make -f demo_rdbms.mk occipool
compile result:
make -f /opt/oracle/product/9.2.0/rdbms/demo/demo_rdbms.mk buildocci
EXE=occipoo
l OBJS=occipool.o
make[1]: Entering directory `/opt/oracle/product/9.2.0/rdbms/demo'
/usr/bin/g++ -L/opt/oracle/product/9.2.0/lib/
-L/opt/oracle/product/9.2.0/rdbms/
lib/ -o occipool occipool.o -locci -lclntsh `cat
/opt/oracle/product/9.2.0/lib
/sysliblist` -ldl -lm
occipool.o(.gcc_except_table+0xe8): undefined reference to `typeinfo for
oracle:
:occi::SQLException'
occipool.o(.gnu.linkonce.t._ZN8occipoolC1Ev+0x18): In function
`occipool::occipo
ol[in-charge]()':
: undefined reference to
`oracle::occi::Environment::createEnvironment(oracle::o
cci::Environment::Mode, void*, void* (*)(void*, unsigned), void* (*)(void*,
void
*, unsigned), void (*)(void*, void*))'
occipool.o(.gnu.linkonce.t._ZN8occipoolD1Ev+0xf): In function
`occipool::~occipo
ol [in-charge]()':
: undefined reference to
`oracle::occi::Environment::terminateEnvironment(oracle
::occi::Environment*)'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x355): In function
`occipool::
select()':
: undefined reference to
`oracle::occi::SQLException::SQLException[in-charge](or
acle::occi::SQLException const&)'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x395): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::getErrorCode() const'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x3db): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::getMessage() const'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x44f): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::~SQLException
[in-charge]()'
occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x466): In function
`occipool::
select()':
: undefined reference to `oracle::occi::SQLException::~SQLException
[in-charge]()'
collect2: ld returned 1 exit status
make[1]: *** [buildocci] Error 1
make[1]: Leaving directory `/opt/oracle/product/9.2.0/rdbms/demo'
make: *** [occipool] Error 2 -
Hi All,
I've successfully installed Oracle8i EE version 8.1.7 on RedHat
Linux 7.2. However, I have NOT had much luck installing Oracle
9i version 9.0.1 on RedHat Linux 7.2. I am wondering if anyone
in this forum has any luck installing Oracle 9i on RedHat Linux
7.2. I am running Linux kernel 2.4.7-10.
Now I am not trying to start a shouting match here; however, it
seems to me that a person with any common sense would not run
Oracle database on a Windows platform. Instead of running it
on Windows platform, one would be much better off running it on
Linux platform. I am currently Oracle EE 8.1.7 on an dual-Intel
processor 266MHZ with 512MB of RAM with Linux as the Operating
System. I have to say that the performance of the box is really
solid. At the same time, I am also running Oracle EE 8.1.7 on
an identical hardware system with Win2K server and I have to say
that the performance system is really pitiful on this Win2k server.
The windows box can only 1 instance at a time. If I try to have
two instances running at the same time, the windows box just comes
to a screeching halt. In contrast, the Linux box really rocks. In
a testing environment, I have 3 instances running at the same time
and the linux is barely breaking a sweat. I am getting maximum
performance out of the linux box because I recompile the linux kernel
to optimize the box to run Oracle database.
Having said that, as an Oracle DBA newbie (with less than six months
of Oracle DBA experience, the last ten years as a Cisco/Unix Engineer),
I find it fascinating that Oracle is only certified to run on SUSE (may
be I am wrong and someone can correct me on this one) when RedHat is
probably the dominant Linux distro. It took three days to get Oracle 8i
version 8.1.7 to install on RedHat Linux 7.2. Why Oracle is slowed to
support Linux RedHat is something I just don't understand.
OK, enough of venting my frustration, if anyone has successfully installed
Oracle 9i EE version 9.0.1 on RedHat Linux 7.2, please share your knowledge.
In the mean time, if anyone interested in obtaining instructions on howto
install Oracle 8i version 8.1.7 on Redhat Linux 7.1/7.2, send me an email
at [email protected] and I will send the instructions. The instructions
are written specifically for "windows dummies" so it is very to read and
follow. If you have been Unix for a long time, there will be instructions
in there that are so easy some of you may ask why put those in there in the
first place. My response would be: "windows dummies".
Regards,
Michael (david)I very much agree with you Oracle is working very much better on Unix/Linux than Windows BUT in many cases you are obliged to use windows ( in Case that My company high managment enforce it ) , I have installed 9i on Windows and Linux , I am herunder including the full details :
========================================================================
Installing Oracle 9i on Linux
Linux : Redhat 7.2
Oracle : 9i Server EE 9.0.1.0.0
RAM Used : 256 M Ram
Hard Disk : IDE RAID
Linux Kernel : 2.4.4-10
JDK : Blackdown jdk118_v3 => downloaded from www.blackdown.org
All shell here is the Bash shell ( Bourne again shell )
1. To run a shell script over Linux , just drag the shell file from the file manager and drop it to a shell window
Be sure to have swap space of 400 M or more
If the systems stop responding for some time , leave it , it will continue
Be sure to make a stage area for the CDs # 2 , 3 only because you will start from the CD 1 but after going in the installation the CDROM freezes and refuses to open door to replace CD ,, in this case you will switch to the last 2 CDs from the stage area
Make sure you have the following executables at /usr/bin : MAKE , AR , LD , NM , C for Unix that is installed during Linux installation from the distribution media
Steps ( Root User ) :
1. be sure to have to have your server domain is like hostess.com.eg and you can be able to ping it
 open /etc/hosts
 add a line as follows ( for instance ) :
 192.168.0.11 hostess.com.eg hostess
 ping hostess.com.eg
 ping hostess
 ping 192.168.0.11
 be sure to have a replay for all of them
2. install JDK inside the /usr/local directory => after downloading the JDK you can easily decompress it but just clicking at it using the GUI
3. get to the / prompt
4. type ln s /usr/local/jdk118_v3 /usr/local/java
5. download binutil RBM from Redhat for version 7 of Linux to downgrade binutils for Linux 7.2 or you will encounter an error at the third CD set
6. download it from : ftp://ftp.redhat.com/pub/redhat/linux/7.0/en/os/i386/redhat/rpms/binutils-2.10.0.18-1.i386.rpm
7. run it as follows : rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
8. change to /proc/sys/kernel
9. type cat sem
10. you will get : 250 32000 32 128
 250 => SEMMSL
 32000 => SEMMNS
 32 => SEMOPM
 128 => SEMMNI
11. you need to have the SEMOPM to be 128 , to do so , locate the file called sem open it replace the value of 32 with 128
12. type again cat sem to be sure of taking the required effect
13. after the installation ends just re-install the 7.2 utils again as follows :
14. rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
15. you can find the last RPM at the 7.2 CD set
16. after downloading the Oracle files from the net you need to decompress it as follows (one step) :
 zcat linux9i_disk1.cpio.gz | cpio idmv
 zcat linux9i_disk2.cpio.gz | cpio idmv
 zcat linux9i_disk3.cpio.gz | cpio idmv
17. you can decompress them at 2 steps as follows :
 gunzip linux9i_disk1.cpio.gz
 gunzip linux9i_disk2.cpio.gz
 gunzip linux9i_disk3.cpio.gz
 cpio idmv < linux9i_disk1.cpio
 cpio idmv < linux9i_disk2.cpio
 cpio idmv < linux9i_disk3.cpio
18. Now you have 3 directories , have care when Burning them to CD because you need to take care of paths
19. if you have downloaded the files via a Windows machine and have a MKS installed over it you can easily invoke Visual Pax and decompress the files at one go using the GUI program
20. log on to Linux as Root and run commands in the file commands.txt
21. log on as user Oracle to be sure that its created
22. log on as root again
23. get to the directory of /home/oracle
24. enable showing the system files
25. open the file of .bash_profile
26. add the accompanied bash file contents at the end of it to set the environment variables
27. log on as user Oracle
28. open shell and type set and be sure that environment variables are set correctly
29. open shell and change to the cdrom by typing cd /mnt/cdrom => Linux 7.2 is an auto mounting OS so you at no need to mount the CD drive prior to using it and if you need to mount it just type : AS ROOT
 mount t iso9660 /mnt/cdrom /cdrom
 this is surly after creating a directory at / called cdrom
30. Start the installer ( as Oracle User ) by typing ./runinstaller
31. the installer will ask you to run a started script as root , you may open a shell and type su then open Nautilus ( if using Gnome or File manager as super user if using KDE ) and drag the noted file to the shell screen and press enter ,, after it is ended continue with the installer
32. if asked to supply JDK home directory then it is /usr/local/java
33. Unix group Name ( to update Oracle software ) : oinstall
34. Oracle home is : /oracle/9.0.1
35. base directory : /oracle/orainventory
Hisham Nagia
IT Manager / OCP DBA
Hostess Egypt / EFG-Hermes - CIIC -
Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?
According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?
Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported. -
Patch for Oracle 8.0.5 on RedHat Linux
I cannot find the glibcpatch.tgz under ftp://ftp.oracle.com/pub/www/otn/linux. Please let us know where we can find this patch.
Install the rpms!!!! You obviously haven't learned how to use
rpm. Type "man rpm " and that will help. To install the packages:
rpm -Uvh compat-?????.rpm
(replace ??? with the actual words)
John Salvo
Way (guest) wrote:
: I was trying to install Oracle 8.0.5 on RedHat 6.0.
: I know I need some kind of patch. So I downloaded it, read the
: readme file, then I was lost. What I don't understand is the
: following:
: 1> Download the following compatibility RPMS to link
: Oracle8.0.5 executables on a glibc 2.1 system from
: ftp://ftp.redhat.com/pub/redhat/redhat-6.0/i386/RedHat/RPMS
: or from one of the mirror sites located at
: http://www.redhat.com/mirrors.html.
: compat-binutils-5.2-2.9.1.0.23.1.i386.rpm
: compat-egcs-5.2-1.0.3a.1.i386.rpm
: compat-egcs-c++-5.2-1.0.3a.1.i386.rpm
: compat-glibc-5.2-2.0.7.1.i386.rpm
: compat-libs-5.2-1.i386.rpm
: I have downloaded these RPMs. Then what should I do next? How
: should I link them or install them?
: Any help or suggestion would be appreciated.
: Thanks in advance.
null -
Redhat Linux Enterprise 6 On T520
Hi
I have installed Redhat Enterprise 6 on my Lenovo T520 everything works fine except wireless i have copied
iwlwifi-6000g2a-ucode-17.168.5.3 into the /lib/firmware and rebooted ... nothing wireless is not working.
Please any advise.
thanksHi
Thank for the reply, i am very sorry i was busy during the holidays.
here is the output of what you requested :
#lspci
00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation Cougar Point KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b4)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 1057 (rev a1)
03:00.0 Network controller: Intel Corporation 6000 Series Gen2 (rev 34)
0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 05)
0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd Device e832 (rev 04)
#lsmod
Module Size Used by
vfat 10646 1
fat 55086 1 vfat
usb_storage 49386 1
fuse 66138 2
ebtable_nat 1975 0
ebtables 18101 1 ebtable_nat
xt_CHECKSUM 1269 1
iptable_mangle 3283 1
ipt_MASQUERADE 2400 3
iptable_nat 6124 1
nf_nat 22788 2 ipt_MASQUERADE,iptable_nat
bridge 74113 0
stp 2107 1 bridge
llc 5608 2 bridge,stp
autofs4 27683 3
sunrpc 241630 1
cpufreq_ondemand 10382 4
acpi_cpufreq 8593 1
freq_table 4847 2 cpufreq_ondemand,acpi_cpufreq
xt_physdev 1707 1
ipt_REJECT 2349 4
nf_conntrack_ipv4 9440 6 iptable_nat,nf_nat
nf_defrag_ipv4 1449 1 nf_conntrack_ipv4
iptable_filter 2759 1
ip_tables 17733 3 iptable_mangle,iptable_nat,iptable_filter
ip6t_REJECT 4562 2
nf_conntrack_ipv6 19655 2
xt_state 1458 5
nf_conntrack 79643 6 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
ip6table_filter 2855 1
ip6_tables 19392 1 ip6table_filter
ipv6 321209 46 ip6t_REJECT,nf_conntrack_ipv6
dm_mirror 14003 0
dm_region_hash 12200 1 dm_mirror
dm_log 10088 2 dm_mirror,dm_region_hash
kvm_intel 45674 0
kvm 291811 1 kvm_intel
uinput 8182 0
wmi 6221 0
sg 30186 0
uvcvideo 61644 0
videodev 38980 1 uvcvideo
v4l2_compat_ioctl32 7145 1 videodev
i2c_i801 11190 0
iTCO_wdt 11708 0
iTCO_vendor_support 3022 1 iTCO_wdt
snd_hda_intel 25194 2
snd_hda_codec 82097 1 snd_hda_intel
snd_hwdep 6746 1 snd_hda_codec
snd_seq 56557 0
snd_seq_device 6626 1 snd_seq
snd_pcm 84700 2 snd_hda_intel,snd_hda_codec
snd_timer 23087 2 snd_seq,snd_pcm
snd 70021 11 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore 8052 1 snd
snd_page_alloc 8628 2 snd_hda_intel,snd_pcm
e1000e 140051 0
ext4 353979 3
mbcache 7918 1 ext4
jbd2 89033 1 ext4
sr_mod 16162 0
cdrom 39769 1 sr_mod
sd_mod 37221 5
crc_t10dif 1507 1 sd_mod
ahci 39105 2
firewire_ohci 24867 0
firewire_core 50853 1 firewire_ohci
crc_itu_t 1683 1 firewire_core
nouveau 537914 0
ttm 46942 1 nouveau
drm_kms_helper 32113 1 nouveau
drm 200778 3 nouveau,ttm,drm_kms_helper
i2c_algo_bit 5664 1 nouveau
video 20966 1 nouveau
output 2471 1 video
i2c_core 31274 6 videodev,i2c_i801,nou
# rpm -qa wireless-tools
wireless-tools-29-5.1.1.el6.x86_64
# /etc/sysconfig/network-scripts/ifup-wireless
#!/bin/bash
# Network Interface Configuration System
# Copyright (c) 1996-2009 Red Hat, Inc. all rights reserved.
# Based on PCMCIA wireless script by (David Hinds/Jean Tourrilhes)
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License, version 2,
# as published by the Free Software Foundation.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
# Configure wireless network device options. See iwconfig(8) for more info.
# Valid variables:
# MODE: Ad-Hoc, Managed, etc.
# ESSID: Name of the wireless network
# NWID: Name of this machine on the network. Hostname is default
# FREQ: Frequency to operate on. See CHANNEL
# CHANNEL: Numbered frequency to operate on. See FREQ
# SENS: Sensitivity threshold for packet rejection.
# RATE: Transfer rate. Usually one of Auto, 11, 5, 2, or 1.
# KEY: Encryption key for WEP.
# RTS: Explicit RTS handshake. Usually not specified (auto)
# FRAG: Fragmentation threshold to split packets. Usually not specified.
# SPYIPS: List of IP addresses to "spy" on for link performance stats.
# IWCONFIG: Extra parameters to pass directly to IWCONFIG
# SECURITYMODE: Security mode, e.g: 'open' or 'restricted'
# IWPRIV: Extra parameters to pass directly to IWPRIV
# Only meant to be called from ifup.
# Mode need to be first : some settings apply only in a specific mode !
if [ -n "$MODE" ] ; then
iwconfig $DEVICE mode $MODE
fi
# Set link up (some cards require this.)
/sbin/ip link set dev ${DEVICE} up
# This is a bit hackish, but should do the job right...
if [ -n "$ESSID" -o -n "$MODE" ] ; then
NICKNAME=$(/bin/hostname)
iwconfig $DEVICE nick "$NICKNAME" >/dev/null 2>&1
fi
# Regular stuff...
if [ -n "$NWID" ] ; then
iwconfig $DEVICE nwid $NWID
fi
if [ -n "$FREQ" -a "$MODE" != "Managed" ] ; then
iwconfig $DEVICE freq $FREQ
elif [ -n "$CHANNEL" -a "$MODE" != "Managed" ] ; then
iwconfig $DEVICE channel $CHANNEL
fi
if [ -n "$SENS" ] ; then
iwconfig $DEVICE sens $SENS
fi
if [ -n "$RATE" ] ; then
iwconfig $DEVICE rate "$RATE"
fi
if [ -n "$KEY" -o -n "$KEY1" -o -n "$KEY2" -o -n "$KEY3" -o -n "$KEY4" ] ; then
[ -n "$KEY1" ] && iwconfig $DEVICE key "[1]" $KEY1
[ -n "$KEY2" ] && iwconfig $DEVICE key "[2]" $KEY2
[ -n "$KEY3" ] && iwconfig $DEVICE key "[3]" $KEY3
[ -n "$KEY4" ] && iwconfig $DEVICE key "[4]" $KEY4
[ -n "$DEFAULTKEY" ] && iwconfig $DEVICE key "[${DEFAULTKEY}]"
[ -n "$KEY" ] && iwconfig $DEVICE key $KEY
else
iwconfig $DEVICE key off
fi
if [ -n "$SECURITYMODE" ]; then
iwconfig $DEVICE enc $SECURITYMODE
fi
if [ -n "$RTS" ] ; then
iwconfig $DEVICE rts $RTS
fi
if [ -n "$FRAG" ] ; then
iwconfig $DEVICE frag $FRAG
fi
# More specific parameters passed directly to IWCONFIG
if [ -n "$IWCONFIG" ] ; then
iwconfig $DEVICE $IWCONFIG
fi
if [ -n "$SPYIPS" ] ; then
for IP in $SPYIPS; do
iwspy $DEVICE + $IP
done
fi
if [ -n "$IWPRIV" ] ; then
iwpriv $DEVICE $IWPRIV
fi
# ESSID need to be last : most device re-perform the scanning/discovery
# when this is set, and things like encryption keys are better be
# defined if we want to discover the right set of APs/nodes.
if [ -n "$ESSID" ] ; then
iwconfig $DEVICE essid "$ESSID"
else
# use any essid
iwconfig $DEVICE essid any >/dev/null 2>&1
fi
If you do have a switch/button to enable the WLAN, what is dumped to /var/log/messages when you press the button?
No changes in the /var/messages..
I have the machine is dual booting for windows 7 and redhat linux 6 64bit. -
Successful installation of Oracle 8.1.7 on RedHat 7.2!
Finaly! I did it! Here's how:
Didn't work out of the box, but it was relatively easy.
Generally, go to www.thomasfly.com/Oranux/ and follow the
instructions, paying attention to the dots especially ;) (you'll
understand in a while). Although the title says "Oracle 8i on RH
7.1", it worked with RH 7.2 for me (as usual -- YMMV).
Kudos go to Thomas Flyer (for the web page above) -- thanks.
Short summary:
1. I've got an Athlon PC (800MHz/256MB/30GB), a decent one. Full
install of RH7.2 (just because I'm lazy + I've got a largish HDD).
2. IBM's JDK 1.1.8 installed.
3. compat-glibc, compat-libs, compat-egcs installed
4. CRITICAL -- make sure the following gets executed before you
install (place it in .bash_profile or profile for your shell):
export LD_ASSUME_KERNEL=2.2.5
. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
Did I mention the dot? :))) I didn't notice it at first (I like
fonts pretty small), and it cost me two hours of useless
installation. Having the script SOURCED is crucial!
5. Check whether you have the following env. variables:
$ echo $LD_ASSUME_KERNEL
2.2.5
$ echo $LDEMULATION
elf_i386_glibc21
Then safely run the 'runInstall' script.
6. I also had the error with ins_ctx.mk -- I applied the
workaround from the Thomas' web page and it worked.
7. Strangely enough, I didn't have to apply the 'glibc-stubs'
patch; everything worked fine without it.
8. Then I changed the sys password, created a user, imported my
database, checked it -- everything is fine!
Good luck in your struggle!
Best regards,
GregFinaly! I did it! Here's how:
Didn't work out of the box, but it was relatively easy.
Generally, go to www.thomasfly.com/Oranux/ and follow the
instructions, paying attention to the dots especially ;) (you'll
understand in a while). Although the title says "Oracle 8i on RH
7.1", it worked with RH 7.2 for me (as usual -- YMMV).
Kudos go to Thomas Flyer (for the web page above) -- thanks.
Short summary:
1. I've got an Athlon PC (800MHz/256MB/30GB), a decent one. Full
install of RH7.2 (just because I'm lazy + I've got a largish HDD).
2. IBM's JDK 1.1.8 installed.
3. compat-glibc, compat-libs, compat-egcs installed
4. CRITICAL -- make sure the following gets executed before you
install (place it in .bash_profile or profile for your shell):
export LD_ASSUME_KERNEL=2.2.5
. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
Did I mention the dot? :))) I didn't notice it at first (I like
fonts pretty small), and it cost me two hours of useless
installation. Having the script SOURCED is crucial!
5. Check whether you have the following env. variables:
$ echo $LD_ASSUME_KERNEL
2.2.5
$ echo $LDEMULATION
elf_i386_glibc21
Then safely run the 'runInstall' script.
6. I also had the error with ins_ctx.mk -- I applied the
workaround from the Thomas' web page and it worked.
7. Strangely enough, I didn't have to apply the 'glibc-stubs'
patch; everything worked fine without it.
8. Then I changed the sys password, created a user, imported my
database, checked it -- everything is fine!
Good luck in your struggle!
Best regards,
Greg -
Please , Help me for installing Oracle 8.1.5 on Redhat Linux 7.0
Hi every body
when I run ./runInstaller from cdrom
I get this messages :
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.Please wait ...
Error in CreateOUIProcess ():-1
: Bad Address
I use JDK-1-1-6.
Thx
nullI have done some oracle installations over RedHat 7.0 (not certificated):
Let's check some things:
1- You must have changed very few parameters on your shm.h sem.h files which are in /usr/include/linux directory.
2- You need to upgrade the glibc and libstdc libraries (.rpm)
3- You must have installed the jre116_v5 on /usr/jre and made a symbolic link like this
ln -s /usr/jre/jre116_v5 /usr/local/jre
4- You must include in the CLASSPATH parameter the jre116_v5 directory. It should look something like this
CLASSPATH=/usr/jre/jre116_v5:$ORACLE_HOME/jlib
5- Be sure to create and export all the parameters in your .bash_profile.
6- Run the ./runInstaller.sh in a terminal window inside the Xwindow.
You can find the jre116_v5 in www.backdown.org
I hope these tips help you
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by xx:
Hi every body
when I run ./runInstaller from cdrom
I get this messages :
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.Please wait ...
Error in CreateOUIProcess ():-1
: Bad Address
I use JDK-1-1-6.
Thx<HR></BLOCKQUOTE>
null
Maybe you are looking for
-
I had the Firefox but O2 asked to update so to print my PDF bill and so I did. Surprisingly after following everything I have got the icon on my desktop but it doesnot work. I cannot open it. Now I do not have the Firefox and already lost 35 mins try
-
Continual updating of previews and thumbnails. Why and how to stop it?
I am switching over to Aperture after having manually managed my files in order to see if there is any benefit for me as my photo collection is getting a bit out of control. I have imported as projects all my folders of images. Now Aperture runs very
-
CIC0 - asks for user name and password on CRM
Hi folks, I am a BASIS gui am facing a peculiar problem with our production CRM system. It is a CRM 5.0 system and we have no java stack . The customer service users have reported on a daily basis when they are logged into CRM system and working w
-
Login settings not saved on client
Dear All When Running the SAP Business One application from a client PC, set all connection details ( server name, server user name and password) and connect to a certain company. After successfully logging on to SAP Business One, close the applicati
-
Using iphone as a wireless router connected to imac??
Silly question here, Okay is there a way to use the AT&T Edge network, via my iphone as my conduit to the internet, Yeah, i know its slow, but if I cancelled my DSL, that would pay for my monthly plan. In other words Plugging in my iphone to my imac