Installation of oracle8i on windows 2003 64 bit

Hi,
We have oracle 8.1.7 on windows 2003 32 bit, now we want to migrate our system to 64 bit windows with oracle 10.2.0.4.
But when we we are trying to install oracle 8.1.7 on windows 2003 with 64 bit we receive below error.
ORA-12546 tns permission denied.
Kindly help us to resolve the same. as after installation of 8.1.7 we can be able to migrate the database to 10g.
It is not possible to use import export due to application dependency.
Kindly advice
Abhay.

ahk wrote:
Hi,
Thanks for the reply,
After doing import of the production schema on the 64bit server with 10g.
users are not able to log in into the application as password encryption description is not at all happening, as a result users are not able to log in to the application.What sort of password encryption? Did it have anything to do with the character set by any chance?
Is it ok if we apply 8.1.7.4 patch on production server, move that backup on 64 bit server & directly migrate it to 10g 64bit. (While doing the testing we have applied the 8.1.7.4 patch on the 8.1.7.0 database on 32 bit & application worked fine with no problem)As you have indicated that there were problems getting the 8i installation to work on a 64 bit server, I would again advise to upgrade to 10g on the same server and then migrate to 64 bit edition on 64 bit server.

Similar Messages

  • Issue with two SID installation in a Single Windows 2003 Server.

    Hi,
    When I install second installation in a same single machine where already One SID installed, first one is goes down.
    But Database is working fine.....
    Disp+Work.exe status first it goes to Yellow then goes down..
    Kernal of First installation is already updated.
    Disp+Work.exe ---> Develeoper_Trc detail is following..
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        TRN
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    159
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        6360
    Thu Oct 30 16:22:26 2008
    kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 6360) [dpxxdisp.c   1254]
         shared lib "dw_xml.dll" version 159 successfully loaded
         shared lib "dw_xtc.dll" version 159 successfully loaded
         shared lib "dw_stl.dll" version 159 successfully loaded
         shared lib "dw_gui.dll" version 159 successfully loaded
         shared lib "dw_mdm.dll" version 159 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Thu Oct 30 16:22:31 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5403]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ides_TRN_01                             <
    DpShMCreate: sizeof(wp_adm)          21008     (1616)
    DpShMCreate: sizeof(tm_adm)          5912624     (29416)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EF60050, size: 6604928)
    DpShMCreate: allocated sys_adm at 000000000EF60050
    DpShMCreate: allocated wp_adm at 000000000EF62150
    DpShMCreate: allocated tm_adm_list at 000000000EF67360
    DpShMCreate: allocated tm_adm at 000000000EF673C0
    DpShMCreate: allocated wp_ca_adm at 000000000F50ABF0
    DpShMCreate: allocated appc_ca_adm at 000000000F5109B0
    DpShMCreate: allocated comm_adm at 000000000F5128F0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F599580
    DpShMCreate: allocated gw_adm at 000000000F599600
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F599630
    DpShMCreate: allocated wall_adm at 000000000F599640
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    rdisp/queue_size_check_value :  -> off
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 6764
      argv[0] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
      argv[1] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
      argv[2] = pf=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=64999
      argv[5] = -DSAPSYSTEM=01
      argv[6] = -DSAPSYSTEMNAME=TRN
      argv[7] = -DSAPMYNAME=ides_TRN_01
      argv[8] = -DSAPPROFILE=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
    ***LOG Q0K=> DpMsAttach, mscon ( ides) [dpxxdisp.c   11937]
    DpStartStopMsg: send start message (myname is >ides_TRN_01                             <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 159
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Thu Oct 30 16:22:36 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 5 / sock 292
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4516) [nixxi.cpp    4424]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6764)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Thu Oct 30 16:23:11 2008
    my types changed after wp death/restart 0xbf --> 0xbe
    my types changed after wp death/restart 0xbe --> 0xbc
    my types changed after wp death/restart 0xbc --> 0xb8
    my types changed after wp death/restart 0xb8 --> 0xb0
    my types changed after wp death/restart 0xb0 --> 0xa0
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:21 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Oct 30 10:53:21 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     6800 Ended         no      1   0        0                                                                         
    1 DIA     6796 Ended         no      1   0        0                                                                         
    2 DIA     6760 Ended         no      1   0        0                                                                         
    3 DIA     6772 Ended         no      1   0        0                                                                         
    4 DIA     6896 Ended         no      1   0        0                                                                         
    5 DIA     6848 Ended         no      1   0        0                                                                         
    6 UPD     6860 Ended         no      1   0        0                                                                         
    7 ENQ     6784 Ended         no      1   0        0                                                                         
    8 BTC     6864 Ended         no      1   0        0                                                                         
    9 BTC     6892 Ended         no      1   0        0                                                                         
    10 BTC     6924 Ended         no      1   0        0                                                                         
    11 SPO     6928 Ended         no      1   0        0                                                                         
    12 UP2     6908 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Thu Oct 30 10:53:21 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    5
    5
    --------++++--
    +
    DIA
    6
    6
    2000
    6
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          13
    wake_evt_udp_now     0
    wake events           total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    since last update     total     8,  udp     6 ( 75%),  shm     2 ( 25%)
    Dump of tm_adm structure:               Thu Oct 30 10:53:21 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    RM-T13, U14,                 , gokul_ggn, 16:22:40, M0, W-1,     , 1/0
    Workprocess Comm. Area Blocks               Thu Oct 30 10:53:21 2008
    =============================
    Slots: 300, Used: 2, Max: 1
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    1
    DISPATCHER
    -1
    WPCAAD001
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:26 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ides_TRN_01                             < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (6752) (SOFT_KILL)
    Stop icman
    killing process (6700) (SOFT_KILL)
    Terminate gui connections
    send SHUTDOWN to REM TM 13
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
    LOCK WP ca_blk 2
    return errno (-17) to T13
    errormsg without overhead: take mode 0
    NiBufIAlloc: malloc NiBufadm, to 0 bytes
    try to send 14 to M0
    NiBufSend starting
    NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
    REL WP ca_blk 2
    set status of T13 to TM_DISCONNECTED
    NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
    SiSelNSet: set events of sock 292 to: ---
    NiBufISelRemove: remove hdl 5 from set0
    SiSelNRemove: removed sock 292 (pos=2)
    SiSelNRemove: removed sock 292
    NiSelIRemove: removed hdl 5
    DpDelSocketInfo: del info for socket 5 (type=3)
    NiICloseHandle: shutdown and close hdl 5 / sock 292
    NiBufIClose: clear extension for hdl 5
    dp_tm_adm[13].stat = DP_SLOT_FREE
    DpGetSchedule: next schedule 1225364011/669000
    DpGetSchedule: no schedule found
    DpITmSlotRelease: release slot 13
    DpListInsert: insert elem 13 into tmadm_free_list (at begin)
    DpListInsert: 188 elems in tmadm_free_list
    DpListRemove: remove elem 13 from tmadm_inuse_list
    DpListRemove: 13 elems in tmadm_inuse_list
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:6752  HANDLE:404)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:27 2008
    NiISelect: TIMEOUT occured (1000ms)
    Thu Oct 30 16:23:28 2008
    [DpProcDied] Process died  (PID:6752  HANDLE:404)
    wait for end of icman
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:29 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:30 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:31 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:32 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:33 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:34 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:35 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:36 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:37 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:6700  HANDLE:412)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=437
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Oct 30 16:23:38 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:6700  HANDLE:412)
    [DpProcDied] Process died  (PID:6764  HANDLE:388)
    DpStartStopMsg: send stop message (myname is >ides_TRN_01                             <)
    NiIMyHostName: hostname = 'ides'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Thu Oct 30 16:23:39 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12283]
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 332 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 332 (pos=3)
    SiSelNRemove: removed sock 332
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
    LOCK WP ca_blk 2
    make DISP owner of wp_ca_blk 2
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 332
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 6360) [dpxxdisp.c   10484]
    Good Bye .....
    Please help out.
    Thanks in Advance.
    Regards,
    Gokul Cahndola

    Yes Finally I Got the solution.
    please check
    >r3trans -d   To Check Conectivity between Apps and DB Server.
    If 000 then its OK- mean connectivity is OK, in this case all work.
    when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed.  DUE to that reasion First one goes down.
    Solution:-  Both system entry should be Listner and tnsname file. Then Both server will work.
    **********THANKS TO "AC"**************
    Regards,
    Gokul Chandola

  • Need to reinstall CF9 Enterprise - Windows 64-bit

    Can anyone point me to an installer file for CF9 windows, 64-bit?  I am upgrading servers and need to reinstall ColdFusion 9 Enterprise.  I can't find the CF9 installers anywhere.
    Cheers.

    See the links here:
    http://www.dcepler.net/post.cfm/last-day-to-download-cf-8-and-9-from-adobe-with-verity
    http://tinyurl.com/cfdownloads

  • Datagurad on Windows 2003

    Hi ,
    Can someone help me with the installation of datagurad on Windows 2003 , Does any1 have the doc for the same.

    Hi, you will must check the next address, the manual explain all concepts and methodology for implement Oracle Dataguard on various platforms, on metalink you can find other technical articles.
    http://www.oracle.com/pls/db102/to_toc?pathname=server.102%2Fb14239%2Ftoc.htm&remark=portal+%28Books%29
    Luck
    Have a good day.
    Regards.

  • I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I ended up putting it in DFU mode.  It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
    Itunes still didn't recognize the device for whatever reason.
    So I used redsn0w.  I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
    Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

  • Installation of SAP NetWeaver on Windows 2003 Server ( 32 Bit )

    Hello Gurus,
    I am planning installation of SAP Net Weaver - SR2 on Windows Server 2003 ( 32 Bit ) and oracle 10g is my database.
    can anybody guide me from where I can install the software coz in the market place SAP N/W-SR3 is available.
    Is SAP N/W - SR3 is recommeded for Windows 2003 Server ( 32 Bit ).
    Can any body guide me the process & my qurey.
    Thanks & Regards
    Shishir

    Read SAp note Note 1108852 - SAP NetWeaver 7.0 / Business Suite 2005 SR3: Windows
    it says:
    21/MAY/08
    SAP system installation only supported on 64-bit operating systems, except for  dialog instances
    As of SAP NetWeaver 7.0 SR3 and Business Suite 2005 SR3, SAP only supports to install dialog instances on 32-bit operating systems. All remaining SAP system instances (central instance, database instance, central services instance (SCS), ABAP central services instance (ASCS)) must be installed on 64-bit operating systems. Therefore the folder "SAP Systems" is not available on the "Welcome screen", when you start the installation from a installation master DVD for 32-bit.
    You might need to install dialog instances on 32-bit if you want to use 32-bit SAP NetWeaver components, such as Adobe document services. We recommend, however, to first check whether these 32-bit components can run on 64-bit operating systems. If so, we recommend to also use 64-bit systems for these components, including the dialog instance.
    If you want to install a non-productive SAP NetWeaver 7.0 SR3 based system (test systems or development are normally productive systems)  on 32-bit, proceed as follows:
          1. Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2 SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
          2. Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3).

  • XMII installation on Windows 2003 Server ( 64- Bit)

    Hello,
    Can we install xMII 11.5 SR01 on Win 2003 server ( 64 -Bit ) ??? When i am trying to download xMII software from SAP market place , under xMII downloads
    -> i can see only win32 link.
    Thanks
    Sharat

    Sharat,
    Did you try installation? I think that hasn't problem. The Windows 2003 Server has the full compabillity with x86 (32 bits) softwares.
    Post here your issues, I will try to help you. I'm very interested in this results.
    Regards,
    Vinicius Martins
    Neoris/Konitech
    Brasil

  • EPMA(Hyperion 11.1.1.3) installation Errors - on Windows 2003 64 Bit Server

    Hi,
    We trying to install Hyperion 11.1.1.3 components with Hyperion Strategic Finance and EPMA on 64 Bit Windows 2003 R2 Server. We are installing all components on a single server. In the installation process while checking the components, we are getting this below error message.
    "component strategic finance web services cannot be installed
    hfm and epma 64-bit componentscannot co-exist with 32-bit component for hsf/fdm
    component performence architect dimension server services cannot be installed
    hfm and epma 64-bit components cannot co-exist with 32-bit component for hsf/fdm"
    Please share your valuable suggestions to go ahead with this installation,
    Thanks in advance for your earliest replies
    ***Chinna***
    Edited by: Hyperion Chinna on Jul 22, 2010 5:10 AM

    Srikanth,
    The New Atlanta ServletExec portion of the xMII 11.5 installation is not fully compatible with 64 bit windows.  Here is a good reference for you:  http://www.newatlanta.com/c/support/servletexec/self_help/faq/detail?faqId=296
    Regards,
    Jeremy

  • Error in Netweaver installation with MaxDB on a 64-bit IA windows 2003

    Hello all,
    I am installing Netweaver CE 7.1 in Windows 2003. Out of the 35 phases , i am getting an error in the 13th phase. The name of the Phase is " Create Database Instance" . An error log is created and the details are as below :
    Subprocess starts at 20091014155346
    Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n SGPSRV011 -d SMD -u CONTROL,******** db_start
    Execute Session Command : exit
    Subprocess stops at 20091014155349
    Subprocess call failedERR
    -24994,ERR_RTE: Runtime environment error
    1,'SMD' has stopped unexpectedly, (view 'Application Event Log') (OS error code 11000)
    This is the text of the error being displayed :
    An error occurred while processing service SAP NetWeaver CE Productive Edition > Installation Options > Standard System > Standard System. You may now
    choose Retry to repeat the current step.
    choose View Log to get more information about the error.
    stop the task and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/CE71_PROD_ADA/INSTALL/ADA/STD/AS.
    I feel that this error has something to do with the settings in the MaxDB database. Can you please help which setting needs to be changed ? Both the Netweaver and the MaxDB are on the same 64-bit Itanium server and the OS is Windows 2003.
    Thanks and Regards
    Vijay

    Check your max db database build, [https://service.sap.com/pam] and apply a patch if available. Also, you may want to log a problem on SMP.

  • Error in installation database in Windows 2003 server 64 bits

    Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 9.2.6 in a machine that has Windows 2003 Server 64 bits
    . On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
    the following messages appear:
    TNS-12500: TNS:listener failed to start a dedicated server process
    TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    32-bit Windows Error: 5: Input/output error
    I see the note 722966 and my procesador is EM64T
    I install in local mode, not remote and using Administrator user.
    Help me, please!

    Hello,
    There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
    http://www.oracle.com/technology/tech/windows/faq.html#x86-64
    Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
    And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
    I hope that this costs(suits) us to solve our problems
    A greeting

  • Need installation document for OEM 11G on windows 2003(32 bit).

    Hi,
    As a part of my project, i need to install the OEM 11G on windows 2003(32 bit) machines and targets also windows 2003. there i need to install again agent 11g(11.1.0.1) and target DB is 10.2.0.4.
    I have done the installation of OMS successfully and installed the agent 11g on target as well. i am facing challeges in configuring the database from OMS. i tried couple of options but nothing is working out. Finally i decided to cross check the installation procedure once again with the previously completed ones. could any body share the same.
    in breif i have done following.
    1) installed RDBMS 11G on OMS server.
    2) insalled java 1.6.18.
    3) installed WLS 10.3.2
    4) installed the OMS 11G(11.1.0.1)
    On agent side i installed agent 11g(11.1.0.1) to monitor a database which is of 10.2.0.4 version.
    agent,listeners are reflecting on OMS with up status but DB is showing as "metric collection error". i tried all the possible options like removing and reconfiguring and agent clearing and agent restart etc...but no use. also i in the Oracle installation document, they mentioned as we need to set user equavelence between OMS and agent server but not sure of this, which i have not done. is this compulsary?
    Sorry for putting all the things in one single thread.
    Thanks in-advance.
    Regards
    DBA.

    Did you check if the database is configured in GC?
    If you can't connect using sqlplus to the user dbsnmp make a connection to the database: alter user dbsnmp identified by <password> account unlock;
    In GC go to Targets, All Targets select the DB concerned and hit Configure. Enter the dbsnmp user password etc. After a while you will see the result: DB shows Up (I hope)
    Eric

  • IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

    Dear all,
    we are just trying to install IDES 4.7:
    IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
    But the installation break with error Message:
    Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
    MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
    FJs-00012 Error when excuting script....
    Any experience or help from your side?
    Thanks in advance
    HanseAtik

    Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
    adn execute "R3trans -d"  Tell what result .
    About documentation read -->
    service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
    in left corner chek your release like :
    "SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
    After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
    Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle 
    Regards.
    Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

  • Problem on installation of windows 2003 Standard Ed. 64 bit with 10 GB RAM

    Hi,
    I'm trying to install the Oracle 10G R2 on Windows 2003 Server Standard Edition 64 bit on HP machine 64 bit.
    My problem is that the Oracle is seeing just 4GB of RAM.
    I found some Oracle notes that explain this problem for machine and OS with 32 bit.
    Any idea?
    Thanks,
    Sergio

    Are you installing Oracle 32-bit?
    (In that case, the process virtual memory addressing is limited to 2^32 = 4GB. Note also it is virtual, not physical memory)
    64-bit editions (e.g. for X64) are available from:
    http://www.oracle.com/technology/software/products/database/oracle10g/index.html
    Message was edited by:
    orafad

  • Installation issues on Windows 2003, Xeon processor and Oracle 9.2 (64 bit)

    Hi all,
    I am using a xeon 4 CPU machine with Windows 2003 (64 bit). I just downloaded Oracle 9.2 (64 bit) and found that it needs Itanium processor. Is this an absolute requirement? Can I still run it on xeon? What are the problems?
    Mahendra

    Re: 64 bit Oracle on Windows: which one to use?

  • Installation of OBIEE 11.1.1.6 in Windows 2003 32-bit

    Hi friends,
    Im going to install OBIEE 11.1.1.6 latest version in my windows system.
    I need to know the exact softwares that i need to download inorder to accomplish it.
    Im not sure only the following is needed to install OBIEE 11.1.1.6, but correct me if im wrong.
    <li> Database 11g Release 2(11.2.0.1.0)
    <li> RCU(11.1.1.6)
    <li> OBIEE for windows 32-bit(11.1.1.6)
    Can you friends, propose me the exact links of where to download all the above softwares. And also is there any step by step document is available for installing OBIEE 11.1.1.6 along with a screenshot in it.
    If so, can anyone help me to a start of latest version of OBIEE 11.1.1.6
    Thanks in advance,
    Regards,
    Saro.

    Hi,
    Its not only upgrading purpose .its used to install obiee also(without configuration), let say if your going to practice/POC/Personal kind then just go for "Simple" installation ..otherwise just go for Software only installation (Devlopment/Production) Server its just installation there is no configuration.if you want to specify several more configuration settings than go for enterprise install
    More about -->obiee11g installation tyeps:
    http://gerardnico.com/wiki/dat/obiee/installation_11.1
    Simple
    Installation with the default settings.
    Software Only Install:
    The “Software Only Install” requires the configuration done in different phase after the enterprise wide installation is over.
    Enterprise
    Enterprise installation is mostly required in Scalable system having the configuration required across multiple Weblogic domain or joining a existing domain to existing Weblogic Server .
    Thanks
    Deva

Maybe you are looking for

  • Just wanted to say I love OS4, its like having a new phone!

    I usually dont post on forums, but I thought I would comment on OS4 that we all got today. I think its great (could of been much better, but better than nothing), I love the new features and the "look", seems like my battery life is a little better b

  • How to archive old log files

    Hi, our OS is AIX and DB is DB2. there are no of files present in sapmnt/<SID>/global/<client no.>JOBLG directory, which are more than 1 week old. could you please help me to archive the list of files either from SAP Level or from OS level Thanks, Mo

  • Lumia 1020 - No Speed Dial

    Having just moved from Android SGS4 I am shocked to find that the Lumia 1020 (possibly the most expensive mobile phone on the market) does not have speed dial under the phone pad keys. Forget about the inconvenient pinning of a contact to the home wi

  • Digikam with f-spot like folders [solved]

    okay, so I did open my photo collection with f-spot, too see where it is these days. Bad thing is, I let it copy over the photo collection while importing, resulting in a folder structure year/month/date. I kinda liked this structure and deleted the

  • Time Machine will not see USB drive attaced to AEBS

    I am having some difficulty getting Time Machine to see a USB attached Lacie drive. I can get it to mount through the finder, but Time Machine will not see it. It also works fine through a direct firewire connection. I have all of the current updates