Installation on a Macbook Air, with sounds on separate drive
Is there a way to install Logic Studio on a Macbook Air so that all the sound libraries and the recordings (and as much of anything else as possible) are on an external HD drive? Space is tight.
No, you got it. One USB port for Audio interface and the other for the streaming support files. I keep thinking of the 1st gen Macbook Airs with the one USB, sorry. The install is a very lengthy process made longer with the I/O limitations of the Air and USB 2.0 for the external support files. After you start the installer it will make sense with drop down menus for where and what get's copied.
Similar Messages
-
I have a new MacBook Air with a USB super drive. I put in a DVD and I get nothing. No Icon on the desk top, no help from DVD player. How do I get it to play and how to eject it now that it's in?
There's a defect. The computer is in warranty so take it in for repair.
-
I am trying to watch a DVD on my Macbook Air using the Apple super drive but it will not play. I can view CDs but not watch movies. Can someone give me instructions on how to watch a DVD?
-
Need help exporting from lightroom 4 on my Macbook Air with an external hard drive.
After importing photos to my new Macbook Air (2014) from external drive, it made me reformat my external drive. After reformatting, I tried to export edited images back to my external drive and it says "photos missing or offline", even when external drive is connected. How do I get my edited images back onto my reformatted external drive?
Ok, so at least you haven't lost the images.
The catalog knows "about" the images but not where they currently are. You cannot import them again because they have already been cataloged.
If the images are on the external drive in the location you want, the the procedure to re-connect is as follows.
Select one of the thumbnails. It should have an "!" or "?" on it (upper right). Click whichever it is and you will be asked to Locate the file. Navigate to the file to re locate it and make sure the check box "Find nearby images" is checked.
Lightroom will now relink all the images.
Note:
I usually just import from my external hard drive and then export them back to the external hard drive when I finish editing them.
this is not a "correct" workflow when working with catalogs. The files remain on the external drive. The act of importing is only necessary once to catalog where the files are and to allow quick access to them via the Library. Editing them either in or outside of Lightroom via Photoshop does not require you to move the file. -
i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support. -
Migrating to new macbook air with Lion, entourage 2008 doesn't work
I bought a new macbook air with lion installed. trying to migrate data from my old macbook with snow leopard. Got most data across, and installed my most frequently used applications:
- office 2008: most office apps 2008 work, if buggily. entourage not, see below.
- firefox (hangs up when downloading updates)
- dropbox (ditto)
<these two problems may have something to do with internet proxy settings, will try to sort that out later>
MAIN ISSUE:
entourage wont open at all. so for now i'm using my old comp for e-mail and the new for the rest.
MY OPTIONS:
please advise (1) what you think is the most time & nerve-saving option (2) how to do it smoothly:
A) try to get office 2008 to work.
when trying to open entourage, it tells me this version (office 2008 12.0) cannot open this entourage database (12.3)
error for other apps says there is a problem with database, and rebuilding several times did not fix it.
would have to start with updating to the version i used last (office 2008 12.3). Problem is the ms office updater does not seem to work on lion. the first update does not open, says it does not support powermac.
B) buying office 2011, and migrating entourage 2008 to outlook.
I suppose the best way to do this is to install office 2011 on the old mac first, then on the new one, then move database, right?
C) migrating from entourage 2008 to lion mail.
best way to do this would be to import entourage email to leopard mail, then move those files to the new mac? and move entourage addresses into the mac addressbook. my major concern is that i have a lot of mailing rules, and a fair bunch of notes. a lot. i;d rather not have to recreate those by hand. Is there a way to import rules from entourage to mail?
i also habe a huge backstock of mail, over 10,000, and a correspondigly huge addressbook (within entourage). i'm ready to abandon entourage at last (though i used it for a decade), but i want to have my addresses, my rules, and at least the last 3 yrs of emails. i get about 130 mails a day so i need plenty of automatic organizing capability.
i never had issues my old mac/snow leopard, i just ran out of ram and the one usb broke, so i figured it's time. kinda sorry i did not just get the usb repaired and extra ram. what a hassle these migrations always are.
cheers!
maediKappy wrote:
Yes, repairing first is a sound idea. In my experience I've only moved from Entourage to the OS X applications or from one version of Entourage to another. In the latter I've been able to just copy over the Microsoft User Data folder. But I have not used Entourage for quite some time.
Microsoft don't make it quite that easy to migrate to their own applications, but the import from a 'tidy' .rge file works well, I had a lot of issues with the first few I migrated but after performing a database repair prior to import all proceeded smoothly. -
Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!
Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit -
I have a new MacBook Air with Yosemite (no CD/DVD capacity). I want to install Photoshop Elements 6. Can I do this with the serial number? If pse 6 is not compatible, can I upgrade to pse 7. I do not need pse 12 or 13
I cannot answer regarding compatibility, but there is no download available for PSE6 if you would need one for this. You might be able to copy the installation files from a disk to some other removable media that the machine accepts. Upgrading to PSE7 would not be possible mainly because Adobe does not sell older versions of their software.
-
where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.
How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it. -
Macbook Air with no OSX (Mid 2011) ... cannot install Lion nor Snow Leopard
I have a Macbook Air with no OSX (Mid 2011) ... and I cannot install Lion nor Snow Leopard.
I purchased this Macbook Air 13" and found that the OS had been wiped off. Since then I've been able to get the Recovery Disk Assistant to get me into the Recovery Partition on the MBA... but when I try the "Reinstall Mac OS X" from within Mac OS X Utilities, the download fails after 30 sec. and I get the error message, "Could not find installation information for this machine. Contact Apple Care". This MBA is still covered under Apple's Applecare, but the nearest Apple Store is 3 hrs away and from what I've read, they may not be able to help me.
I know all about Build 11A2063 but cannot figure out where or how to get that.
Also, I've tried making a bootable Lion Drive from my Mac Mini onto a flashdrive, but this too did not work on the MBA (I assume because it isn't Build 11A2063).
I have a huge expensive paper weight with no idea of where to go from here. Any help would be much appreciated.Where did you buy an MBA without an operating system? Was this from another individual who took the liberty to remove the Mac OS X before selling it to you?
You might try calling Apple customer support and have them walk you through the process, as they can figure out just what version of the OS should be on that machine.
http://www.apple.com/contact -
I have a Macbook Air with Lion and have downloaded for the Pico Pix 2055 which I am unable to run. How do I override the security. I have followed the Mac procedure but to no avail :-(.
See the heading "How to open an app from a unidentified developer" on this support page. The instructions apply to installer packages as well as applications.
-
title self askes.
macbook air: i dont want my friend to hear what i am hearing on the computer while calling.
i have newest version macbook air with Lion.
and while calling someone via skype, i dont want them to hear what im hearing on the computer such as Itunes, youtube, or whatever comes out of speaker.
samething happends when im using headphones.
i wanna listen to the music or watch youtube video during the call,
but it is almost impossible b/c my gf can hear the sound coming off the computer much louder than my actual voice.
this is not fun.You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one. -
When I try to login to the website of my bank, I get the following error message:
403 - Forbidden: Access is denied.
You do not have permission to view this directory or page using the credentials that you supplied.
I have a new MacBook Air with OS Yosemite installed.
What is the problem and how can I solve it?Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
Back up all data.
Double-click anywhere in the line below on this page to select it:
com.apple.idms.appleid.prd
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
Credit for this idea to Christian Braukmueller of SAP. -
Hi All,
I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now. In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want. TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme. -
I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way? I appreciate that it is a different computer but I am now the end user of both devices and I was just wondering if it was possible.
Thanks,
SeanThe answer would be in your software license agreement for Aperture. However if you cannot locate it you can ask in the Aperture forum, the link for that is:
https://discussions.apple.com/community/professional_applications/aperture
However I believe you can have Aperture installed on two machines however only one may be using it at a time.
On the new iMac launch the Mac App Store - Purchased - look for Aperture and download to your new machine.
Maybe you are looking for
-
ESA scanning for a file inside of a zip inside of another zip.
There is a new file-encrypting ransomware called CTB-Locker going around that places a malicious .cab file inside of a .zip file inside of another .zip file. Two questions: 1) How far will an ESA scan depth wise into zips inside of zips. 2) Is a .ca
-
Import function doesnt recognize pictures
Hello, i just started using PSE yesterday and imported my 6000 Pictures. Everything worked fine except for one folder. PSE just doesnt import the pictures in there. I tried removing the folders inside the specific folder or renaming the folder but ev
-
Ever since I upgraded to CS6 (3 months ago) I am having crashes all the time with actions. I have tried to remake the actions, reinstall Illustrator, disable font embedding, nothing works. I have posted the crash to Adobe many times but no fix, obvio
-
Hi, I have a powerpoint presentation (will call it A.PPTX) which has an embedded spreadsheet object (B.XLSX). I was able to double click the object in "A" and open "B.XLSX" as and when necessary. today, i opened B from the A and inserted another spre
-
DSC software using 100 percent of CPU time.
nicitidl5.exe running even after shutdown.