Installation Oracle10g Release - 2 RAC (2 Node) on HP-UX 11.23 using OCFS-2

Hi All,
I want to install Oracle 10g Release - 2 RAC (2 Node) on HP-UX 11.23 using OCFS-2. Please send me a link or docs which describes about step by step instruction of OCFS-2 and RAC on HP-UX 11.23.
Thanks,
Subhankar

Subhankar,
Check this link out
http://download.oracle.com/docs/cd/B19306_01/install.102/b14202/toc.htm
and make sure you have met all the pre-requisites (patches to install oracle on hp-ux 11- you can refer to oracle domentation for the required patches.
Aslo, if you have access to metalink you can refer to this Doc ID: Note:182177.1 Step-By-Step Installation of RAC on HP-UX. Actually this was created for 9i but it will give you a general idea.

Similar Messages

  • Oracle RAC one node

    why Oracle introduced Oracle RAC one node in 11gR2?
    I have gone through oracle documents on oracle rac one node, but i couldn't find much added advantage than instance failover. We have already some technologies like datagaurd and some third party softwares for instance failover.
    Then why oracle introduced this RAC one node in the new release i.e 11gR2?
    What exactly oracle wants to provide from oracle RAC one node?
    Thanks...
    Bharath

    Why RAC one node?
    Oracle RAC one node is a single instance of Oracle RAC that runs on the node in a cluster. The benefit of the RAC one node option is that it allows you to consolidate many databases into one cluster without a lot of overhead, while also providing high availbilty benefits of failover protection, as well as for Online rolling patch application and rolling upgrades for the Oracle clusterware.
    Another aspect of RAC one node allows you to limit th CPU utilization of individual database instances within the cluster through a feature called resource manager instance caging, which gives you the ability to dynamilcally change the limit as required.
    Furhtermore , with RAC one node there is no limitation for server scalabilty such that if applications outgrow the current resources than a single node can supply, you can then upgrade the applications online to Oracle RAC.
    In tthe event that the node which is runnig Oracle RAc one node becomes saturated and out of resources, you can migrate the instance to another node in the cluster using Oracle rac one node and another new utilty called OMOTION feature.OMOTION feature for Oracle RAC 11g R2 rac allows you to migrate a running instance to another server without downtime or distrubtion in service for your enviornment.
    Hope you're understand.

  • Oracle Applications 11i Load Balancing does not work with RAC one Node

    Hi all,
    Could you help me to resolve this issue.
    Architecture environment is :
    - One APPS tier node
    - Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
    - The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
    We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
    When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
    The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
    During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
    Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
    Thank you for your advice.
    Moussa

    This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
    What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
    One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

  • Rac One Node on Rac Servers

    Hi Xperts
    We have this environment:
    2 Rac Nodes 11.2.0.3 Enterprise on Oracle Linux 5.9 . 
    We have one production Database on this Rac and the users ask to create two single instance on each node, something like this:
    Node1 -> Rac Prod1,  Single Test
    Node2-> Rac Prod2,  Single Dev
    I want to create Rac One node for those Database (Dev, Test) and create New Diskgroups for ech database.
    Can I install a Rac One node on those Server  with DBCA?
    Do I nedd to Install new Database Software ?
    Does the installed Rac have some affectation ?
    I just want to be sure about this procedure, before to do anything.
    Thank you
    J.A.

    Hi J.A.
    Yes you can! However you need to install Grid Infrastructure (GI) in cluster on both nodes, then install database software. Either during software installation or after that, DBCA would allow you to create 1) Single instance, 2) RAC database, 3) RAC One Node database. Keep in mind that RAC One Node is an option (additional license) to the Enterprise Edition of Oracle Database.
    I've talked on that topic at the Bulgarian Oracle Users Group at 2011, here is the link to the presentation, you may find it useful. I might upload the videos as well if you need to have something like a proof of concept of just for your own:
    http://sve.to/download/1112/
    Also I would go with one disk group for both databases, as long as they share the same physical disks I don't see the point of doing that ? Having one diskgroup would allow you to utilize better you disk/space resources.
    The procedure would be:
    1. Install GI in cluster.
    2. Install software libraries.
    3. Patch up to 11.2.0.4.
    4. Create RAC One Node database using either command line or using Custom Template of DBCA.
    At the end of the day, if you have standard edition license you can still install GI in cluster and create single instance databases on each server. The downside of doing that is that you need to manually failover the database to remaining node in case of disaster.
    Regards,
    Sve

  • Patch 9004119 to use Oracle RAC One Node Utilities

    Hi all,
    I am installing Oracle Grid Infrastructure (11.2.0.3), I am following DOC ug-raconenode-2009-130760.pdf, about RAC One Node installation, as Oracle recomendation, and this DOC talk about install patch 9004119 to use Oracle RAC One Node Utilities (such as Omotion). If I am using 11.2.0.3, is it necessary install patch 9004119 ?
    Thanks in advance.
    Leonardo.

    user10674190 wrote:
    Hi all,
    I am installing Oracle Grid Infrastructure (11.2.0.3), I am following DOC ug-raconenode-2009-130760.pdf, about RAC One Node installation, as Oracle recomendation, and this DOC talk about install patch 9004119 to use Oracle RAC One Node Utilities (such as Omotion). If I am using 11.2.0.3, is it necessary install patch 9004119 ?
    Thanks in advance.
    Leonardo.9004119:PATCH FOR RAC ONE NODE SCRIPTS can applied only on 11.2.0.1 , As you are in 11.2.0.3 so no need of it.

  • 11g R2 and RAC One Node

    Hi,
    what is realy the advantage and difference between RAC and RAC One Node, since finaly we should switch to another server if a node/instance crashes.
    On IT Tips by Burleson Consulting it is said :
    What makes Oracle RAC One Node special is that it performs quick clone of the instance to a new node.
    Which for me means switch to another server on the RAC.
    Thanks for the explanations.

    - can be easily extended to multiple nodes.
    - you can use "Oracle Restart" which restarts your resources automatically
    - suppose you have several rac installation among your single databases you can manage a single node like you do with rac installations
    Edited by: Ronny Egner on Sep 28, 2009 4:29 PM

  • Can RAC and RAC One Node share the same servers ?

    Does anyone know if it is possible for RAC and the new 11gR2 RAC One Node to share the same set of physical servers i.e. in effect having 2 clusters sharing the same set of servers ( though you could argue RAC One node is a different type of clustering or even that it is not real clustering at all - more instance transporting ).
    Or does standard RAC always require exlusive use of the physical servers it is using as its nodes ?
    Any thoughts appreciated
    Jim

    Jimbo wrote:
    Does anyone know if it is possible for RAC and the new 11gR2 RAC One Node to share the same set of physical servers i.e. in effect having 2 clusters sharing the same set of servers ( though you could argue RAC One node is a different type of clustering or even that it is not real clustering at all - more instance transporting ).
    Or does standard RAC always require exlusive use of the physical servers it is using as its nodes ?
    Hi Jim,
    To deploy RAC we need Oracle Grid Infrastructure for a cluster (aka Oracle Clusterware) on top.
    What determine if it's Single /RAC /RAC one Node is the Installation of Oracle Database.
    So, Oracle Clusterware support on Same Cluster ( RAC/ RAC one Node / Single).
    You will need one installation for each Feature.
    e.g on Same Cluster
    ---> Grid Infrastructure GRID_HOME=/u01/app/11.2.0/grid
    --->> RAC one Node /ORACLE_HOME = /u01/app/oracle/product/11.2.0/racone_11203
    --->> RAC /ORACLE_HOME = /u01/app/oracle/product/11.2.0/rac_11203
    --->> SINGLE /ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_11203
    For me make no sense RAC ONE NODE and RAC on same cluster.
    Because RAC ONE NODE is a RAC with less feature.
    Regards,
    Levi Pereira

  • Trying out RAC one node on Windows

    Hi all,
    I have the Grid infrastructure software installed on a 64 bit windows server (standalone - not clustered). Was trying to install an 11g RAC enabled database on said server and it won't install as complains it is not a cluster.
    Is it possible to install a RAC enabled Database on a One node grid server that is not clustered to another node?
    Any help would be much appreciated as trying to get knowledge with GRID and RAC enabled instances.
    Edited by: user13735858 on 10-Feb-2011 06:26

    Hi,
    Thanks I installed "Real Application Clusters without Oracle Clusterware" for single standalone server - and it installed without issues.Have you installed Oracle RAC without Clusterware?
    There is some misunderstanding or you did not install Oracle RAC because Oracle Clusterware is a requirement for using Oracle RAC and it is the only clusterware that you need for most platforms on which Oracle RAC operates.
    Although Oracle RAC continues to support select third-party clusterware products on specific platforms, you must also install and use Oracle Clusterware.
    Oracle grid infrastructure for a standalone server does not support RAC.
    GI Standalone Server is intended to use feature Oracle Restart and Automatic Storage Management (ASM).
    The Oracle grid infrastructure for a standalone server is the Oracle software that provides system support for an Oracle database including volume management, file system, and automatic restart capabilities. If you plan to use Oracle Restart or Automatic Storage Management, you must install the grid infrastructure before installing your database.
    The grid infrastructure for a standalone server is the software that includes Oracle Restart and Automatic Storage Management. Oracle combined the two infrastructure products into a single set of binaries that is installed as the grid infrastructure home. The grid infrastructure should be installed before installing Oracle Database 11g Release 2.
    My question is does the server for one node have to be part of a cluster before you can install a RAC instance, even if you intend the instance to remain as one node RAC?1- You must Install and Configure Oracle Clusterware, even if it is only one node.
    2 - Install Oracle Software Database (RAC)
    3 - Create your RAC Database.
    RAC or RAC One Node must be configured on Oracle Clusterware.
    Regards,
    Levi Pereira
    Edited by: Levi Pereira on Feb 11, 2011 1:15 PM

  • Rac One node

    Dear all
    can i use ClusterWare 11.1 with DB 11.2 as i can't find Clusterware until now ?
    can i make one node RAC using Clusterware & DB R11.1 or i have to use 11.2 ?
    thanks.

    Hi,
    for question 1: No, Clusterware has to be of the same or higher version than the DBs it's managing. So, 11g Rel. 1 Clusterware cannot be used to run an 11g Release 2 database. The other way round would work: 11g Rel. 2 Clusterware works perfectly with any DB 10.1 - 11.2
    For question 2: Oracle RAC One Node is an 11.2 feature.
    Hope that helps. Thanks,
    Markus

  • FRA on NFS Oracle RAC One Node

    Hi all,
    we installed Oracle RAC One Node on Oracle Linux. Everything seems to work fine except one little thing: we are trying to change the database to archivelog mode, but when we are trying to relocate the database, we are getting ORA-19816 "WARNING: Files may exist in ... that are not known to database." and "Linux-x86_64 Error: 37: No locks available"
    The FRA is mounted as NFS Share with follwing options: "rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,noac,vers=3,suid"
    I searched a lot on the Internet but couldn't find any hint. Can anybody point me to the right installation guide?
    Thanks in advanced

    Hi,
    user10191672 wrote:
    Hi all,
    we installed Oracle RAC One Node on Oracle Linux. Everything seems to work fine except one little thing: we are trying to change the database to archivelog mode, but when we are trying to relocate the database, we are getting ORA-19816 "WARNING: Files may exist in ... that are not known to database." and "Linux-x86_64 Error: 37: No locks available"
    The FRA is mounted as NFS Share with follwing options: "rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,noac,vers=3,suid"
    I searched a lot on the Internet but couldn't find any hint. Can anybody point me to the right installation guide?Check if NFSLOCK service is running... if not start it.
    # service nfslock status*Mount Options for Oracle files when used with NAS devices [ID 359515.1]*
    Mount options for Oracle Datafiles
    rw,bg,hard,nointr,rsize=32768, wsize=32768,tcp,actimeo=0, vers=3,timeo=600For RMAN backup sets, image copies, and Data Pump dump files, the "NOAC" mount option should not be specified - that is because RMAN and Data Pump do not check this option and specifying this can adversely affect performance.
    The following NFS options must be specified for 11.2.0.2 RMAN disk backup directory:
    opts="-fstype=nfs,rsize=65536,wsize=65536,hard,actime=0,intr,nodev,nosuid"Hope this helps,
    Levi Pereira
    Edited by: Levi Pereira on Aug 18, 2011 1:20 PM

  • Oracle RAC one node-11.2.0.1 with patch 9004119

    Hi,
    I'm slightly stuck here. I have successfully converted 11.2.0.1 2 node RAC to RAC one node with patch *9004119*(which has scripts required for racone). My single instances are up and running, relocation of databases go fine
    As i launch my OEM, it pops with +"ORA-12505:TNS:listener does not currently know of SID given in connect descriptor".+ . Obviously, ./Raconeinit renames the DB instances, but doesn't get changed in OEM. It still lists my old instances.
    I manually change ORACLE_SID to new instances in all my nodes, so i'm able to connect through sql, but how do i configure it in DB control so that the change is seen universally. Any application i run with the new instance gives me the above mentioned error.
    Please respond!

    Hi,
    In continuation with my above query, i did some search and looked at 'raconeinit' script. It's basically trying to run certain commands to see the current server, free server, current running DB , stores the value in a variable and validates against the input I provide, which is not happening.
    When i manually try to run the commands mentioned in script, it gives me invalid -i and -f options errors.
    to see DB up:
    +./crsctl status resource ora.$LOWER_DB_NAME.db | $GREP -i "^STATE" | $GREP -i "ONLINE" | $WC -l+
    to see current server
    +./crsctl status resource ora.$LOWER_DB_NAME.db | $GREP -i "STATE" | $AWK -F'ONLINE on ' '{print $2}'+
    to see free servers
    +./crsctl stat serverpool Free -v|$GREP -i active_servers|$AWK -F'=' '{print $2}'+
    It is not accepting my input (free server) and hence exiting. :(
    Need help badly

  • Installation of  oracle 10g rac on open solaris  for X86 Machine

    Hi
    Can you please let me know the advantages of installation of oracle 10g rac on open solaris on x86 machine.And also let me know the detail steps involved in instatllation of oracle 10g rac on open solaris on x86. please suggest the recommdendation for the installation
    Thanks
    Saiprasath

    If by "advantages of installation of oracle 10g rac on open solaris on x86 machine" you mean advantages over RAC on Linux or AIX or HP/UX there aren't any.
    If you want to know the advantages of RAC over stand-alone they generally relate to:
    1. Eliminating the server as a single point of failure
    2. Transparent fail-over
    2. Incremental horizontal scalability

  • Database upgrade - Oracle 10g r2 ,RAC(2 Nodes with ASM) upgrade from HP-UX to RHEL 5.9

    Hi All
    I am planning to upgrade our RAC database 2 nodes with ASM from HP-UX to RHEL 5.9.
    Following is our setup
    Current setup:
    Oracle Database 10g r2 (10.2.0.5.0) RAC database.
    Nodes: 2
    Storage: ASM
    OS: HP-UX ia64
    Database Size: 1.2 TB
    New Setup:
    Oracle Database 10g r2(10.2.0.5.0) RAC database
    Nodes: 2
    Storage: ASM
    OS: RHEL 5.9 x86 64
    Since we are moving from a big endian format to a small endian format(HP-UX to RHEL 5.9) the same ASM cannot be used.
    Kindly help me with process and other important documents to be followed.
    Thanks.

    Hi...
    If it was a standlone database concepts like transportable tablespaces, rman would have been convenient.
    Since we are using a RAC database with ASM as storage how do we use these techniques specified in NOTE:733205.1
    Due to endianness issue we cannot use the same ASM instance.
    Along with the new RAC node install a new ASM instance would have to be created.
    Kindly help me with migration for RAC with existing ASM to new Hardware
    Thanks and Regards

  • ORA-24544 When Creating a Standby From RAC One Node

    I have a RAC One Node database running on node A and am attempting to create a Data Guard standby on node B using the following RMAN command -
    duplicate target database for standby from active database
    Error returned is -
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 03/10/2015 11:11:06
    RMAN-05501: aborting duplication of target database
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04014: startup failed: ORA-24544: Oracle RAC One Node instance is already running.
    Can anyone advise ?
    Thanks in advance

    Hi,
    ORA-24544: Oracle RAC One Node instance is already running.
    Cause: An instance startup failed because an instance of the Oracle RAC One Node database was already running on one of the cluster nodes.
    Action: In Oracle RAC One Node, avoid any attempt to start a second instance by any means while the instance is already running.
    I have never used One Node RAC, but it looks like RMAN trying to start an offline instance of current One Node RAC on Node B.
    HTH,
    Pradeep

  • RAC One Node: downtime after HW-outage?

    Hi ,
    RAC One Node seems to be a good alternative compared to a "regular" RAC.
    Since we don't have any experience with RAC One Node we are currently going through the available documentaion and try to get a picture of the advantages/disadvantages.
    One major point is the question "what will exactly happen when an HW-failure or outage occurs?". It's my understanding - and what Oracle has documented - that the Oracle Clusterware provides failover protection to Oracle RAC One Node. If the node fails, Oracle Clusterware will automatically detect the failure and restart the Oracle RAC One Node database on another server in the pool.
    In our case we would have the active node in Datacenter 1, the passive node in Datacenter 2. Therefore if the node in Datacenter 1 fails, the database should then get started on the node in Datacenter 2.
    My questions now are:
    - will that really automatically be done?
    - what happens to the sessions which were connected to the database before the HW-failure?
    - is it possible to determine how long this failover will take?
    I'm sure that somebody has already tested this situation - any help will be appreciated.
    Rgds
    JH
    Edited by: VivaLaVida on 05.12.2012 08:57

    Hi,
    My questions now are:
    - will that really automatically be done?Yes, automatically and transparent
    - what happens to the sessions which were connected to the database before the HW-failure?Depend if you are using Omotion the connection will be redirected to another node, if you are cold failover the client will be have a short downtime.
    - is it possible to determine how long this failover will take?Depend of failure, but normal (could failover) is on range from 1 to 3 minutes, using (omotion- hot failover) no downtime.
    Read it :
    http://www.oracle.com/technetwork/products/clustering/overview/ug-raconenode-2009-130760.pdf?ssSourceSiteId=otncn
    Maybe this can clarify your issues.
    Any question just ask.
    Regards,
    Levi Pereira
    Edited by: Levi Pereira on Dec 5, 2012 11:58 AM
    PS: Ignore use of Omotion if you have "downtime after HW-outage". Consider only cold failover.

Maybe you are looking for

  • Print 3D PDF document with white background

    Hi! Is it possible to print a view from 3D PDF document with white background? I could not find any possibilty to change the grey background color, neither in the standard preferences nor in the print options... Thanks for your help! Kind regards, Ma

  • Adding a Print button to a Flash movie

    Hi. I've created a Flash movie and now want to add a simple print button to it - one that will just bring up the users default print dialog box. I've created a new layer, highlighted the first frame and dragged a print button in from the library. Whe

  • Thumbnail not displaying when attaching image to email

    Suddenly my Mac is not displaying a thumbnail image when I go to attach an image to an email. I have fixed permissions, restarted and relaunched Finder, but it's still not displaying. I've also unchecked and rechecked "show icon preview" in View Opti

  • Logitech MX550 Revolution Keyboard and mouse combo

    I've been searching forever to find a solution, a driver for the keyboard and mouse. I've found pay for solutions such as, steermouse but only for the mouse. I would really like to find some software that would enable me to use my Keyboard and mouse

  • HT2905 iphone music library is mixed up....normal in itunes

    my music is all messed up, some songs show two...one will play and one wont...and when it does play its the wrong song.  Can anyone help?