Installation problem on AIX ( SAP4.7, Oracle-9i)

Hello Gurus,
We are installaing SAP4.7 on AIX with oracle-9i as an database
we have completed central instance successfully, while database instance we are facing error
I am attaching error log for your referenec
error log
You entered: /sapcd/oracle9/51030360/ORA92_1
Found the label ORACLE:9.2:RDBMS(1/4):Oracle RDBMS AIX5 CD:CD51018585_1 but need
the label ORACLE:9.2.0:RDBMS(1::
Can any body help me regarding this error.
Thanks & regards
Shishir

> You entered: /sapcd/oracle9/51030360/ORA92_1
> Found the label ORACLE:9.2:RDBMS(1/4):Oracle RDBMS AIX5 CD:CD51018585_1 but need
> the label ORACLE:9.2.0:RDBMS(1::
Are the CDs numbers matching to your installation master CD?
Markus

Similar Messages

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Installation problem of ISSUE_TRACKER_1.6 on Oracle Express XE

Sorry, but I'm new to HTMLDB, and have seen similar problems listed on the forum, but they have not given me insight into my problem.
I am running Oracle XE beta on Windows. I only have one workspace and user at the moment. I imported the application, and had it load into my workspace. The 3 tables are in the database, and the data is loaded.
Unfortunately, when I try to run the Issue Tracker I get:
Error Unable to fetch authentication_scheme in application 100.
The Debug output:
0.00: S H O W: application="100" page="1" workspace="" request="" session="13190102205862944177"
0.00: ...Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.00: alter session set nls_language="AMERICAN"
0.00: alter session set nls_territory="AMERICA"
0.00: NLS: CSV charset=WE8MSWIN1252
0.00: ...Setting NLS Decimal separator="."
0.00: ...Setting NLS Group separator=","
0.00: ...Setting NLS date format="DD-MON-RR"
0.00: NLS: Language=en-us
0.00: Application 100, Authentication: CUSTOM2, Page Template: 8088318536817124
0.02: Show ERROR page...
0.02: Fetch session state from database
0.02: Processing point: AFTER_ERROR_HEADER
ORA-0000: normal, successful completion
Error Unable to fetch authentication_scheme in application 100.
OK
0.02: Processing point: BEFORE_ERROR_FOOTER
0.02: ...Determine if user MRO with SGID 702411932698381 can develop application 100 in workspace 702411932698381
I'm sure it is something simple, but will await your reply.
Thanks!
<<Martin Farber>>

SQL> select id||':'||security_group_id from wwv_flow_custom_auth_setups where fl
ow_id=100
2 /
no rows selected
SQL> select custom_authentication_process||':'||security_group_id from wwv_flows
where id=100
2 /
CUSTOM_AUTHENTICATION_PROCESS||':'||SECURITY_GROUP_ID
.8095935619817161.:702411932698381

Installation problem under AIX 5.3 with Oracle 10g

Hello,
I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
In ImportMonitor.Console.Log i have the following errors:
Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
Loading of 'SAPSSEXC_4' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
Inside SAPSSEXC_4.log i have the following errors:
/usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: T512CLU deleted/truncated #20071130102908
myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
myCluster (63.20.Imp): 656: return code received from nametab is 2
myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
Under SAPPOOL i have:
usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
/usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
/usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
Compiled Oct 20 2007 02:05:46
/usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: ATAB deleted/truncated #20071130102908
failed to read short nametab of table AT01 (rc=2)
(CNVPOOL) conversion failed for row 0 of table VARKEY = ã ±ã ±ã °â â â â â â â â â â â â â â â â â â â â â â
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: disconnected from DB
/usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
Do you have any idea how can i procceed with the errors?
Thank you in advance
Thanasis Porpodas

Hi,
look at sap note 921593 and search for myCluster ,
read that section following is a part of that note.
Symptom:
During the import into a UNICODE system the following error occurs
(for example in the SAPCLUST.log):
myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC .
myCluster (63.2.Imp): 1927: logic table is canonical.
myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC .
myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC .
myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
myCluster: CLU4 *00001*
myCluster (63.2.Imp): 319: error during conversion of cluster item.
myCluster (63.2.Imp): 322: affected physical table is CLU4.
(CNV) ERROR: code page conversion failed rc = 2
|
| RSCP - Error
| Error from: Codepage handling (RSCP)
| code: 128 RSCPENOOBJ No such object
| Dummy module without real rscpmc[34]
| module: rscpmm no: 2 line: 75 T100: TS008
| TSL01: CPV p3: Dummy-IPC p4: rscpmc4_init
`----
Cause:
This problem is caused by incorrect data which should have been removed from the source system before the export.
Solution:
There are two possible workarounds:
 1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
 search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
 2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
 search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

Oracle 9i DB Installation Problem on AIX 4.3.3

Hi,
I tried to install Oracle 9i DB on AIX 4.3.3 with Maintainence Level 9. However, I got the following error:
Calling action unixActions2.0.1.4.0 make
installMakePath = /usr/ccs/bin/make
installMakeFileName = /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
installTarget = ioracle
undoMakeFileName =
installArguments = ORACLE_HOME=/usr/opt/oracle/product/9.0.1,
logFile = /usr/opt/oracle/product/9.0.1/install/make.log
undoTarget =
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target ioracle of makefile /usr/opt/oracle/product/9.0.1/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
Can anyone know what is the problem here?
Thanks and hope to hear from you soon.
Nelson

Hi,
we have noticed the same error !!!!!!! :-(
doing the makefile statement by consolle we have:
"$ make -f rdbms/lib/ins_rdbms.mk ioracle
- Linking Oracle
rm -f /usr/oracle/product/9.0.1/rdbms/lib/oracle
ld -b64 -o /usr/oracle/product/9.0.1/rdbms/lib/oracle -L/usr/oracle/product/9.0.1/rdbms/lib/ -L/usr/oracle/product/9.0.1/lib/ -bbigtoc /usr/oracle/product/9.0.1/rdbms/lib/opimai.o /usr/oracle/product/9.0.1/rdbms/lib/ssoraed.o /usr/oracle/product/9.0.1/rdbms/lib/ttcsoi.o /usr/oracle/product/9.0.1/lib/nautab.o /usr/oracle/product/9.0.1/lib/naeet.o /usr/oracle/product/9.0.1/lib/naect.o /usr/oracle/product/9.0.1/lib/naedhs.o /usr/oracle/product/9.0.1/rdbms/lib/config.o -lserver9 -lodm9 -lskgxp9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 /usr/oracle/product/9.0.1/rdbms/lib/defopt.o -lknlopt -lslax9 -lpls9 -lplp9 -bE:/usr/oracle/product/9.0.1/rdbms/lib/plsqlncomp.exp -lserver9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lknlopt -lslax9 -lpls9 -lplp9 `cat /usr/oracle/product/9.0.1/rdbms/lib/nmliblist` /usr/oracle/product/9.0.1/rdbms/lib//jox.o -laurora -bE:/usr/oracle/product/9.0.1/rdbms/lib//oracle.exp -lwwg9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lnro9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lwtcserver9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lnro9 `sed -e 's/-ljava//g' /usr/oracle/product/9.0.1/lib/ldflags` -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnzjs9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lpls9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lserver9 `if /bin/ar -X64 tv /usr/oracle/product/9.0.1/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo9"; fi` -lctxc9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 -lordimt9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lsnls9 -lunls9 -lld -lm `cat /usr/oracle/product/9.0.1/lib/sysliblist` -lm -bI:/usr/oracle/product/9.0.1/lib/pw-syscall.exp -bI:/usr/oracle/product/9.0.1/lib/ksms.imp
ld: 0711-317 ERROR: Undefined symbol: ksbdpt_
ld: 0711-317 ERROR: Undefined symbol: ksmsgl_
ld: 0711-317 ERROR: Undefined symbol: ktswh196_
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
make: The error code from the last command is 8."
We hope in a fast solution.......
Thanks,
Daniele Tinti
Valerio Balbi

ODI Lightweight Designer Installation Problem on AIX

Hi guys,
I have installed oracledilwd on OAS 10.1.3.1.0 and encountered a problem while accessing the same.
The installation for ODI 10.1.3.5 has been done on IBM AIX 5.2 and the deployement of oracledilwd.war on the OAS instance.
the master and work repositories have been crated as weel as the data sources.
I have got the metadata navigator working but although the Lightweight designer got successfully deployed the .war file for the same yet when i test the lwd application i am returned "HTTP 500 - Internal server error" and on checking the ascontrol.log file
This is what i get..
*WARN jmx.JMXUserManager _store.319 - Exception received during persist user info.*
com.phaos.ASN1.ASN1FormatException: java.lang.ArrayIndexOutOfBoundsException
at com.phaos.cert.PKCS12Safe.input(PKCS12Safe)
at com.phaos.cert.PKCS12Safe.<init>(PKCS12Safe)
at com.phaos.cert.PKCS12.input(PKCS12)
at com.phaos.cert.PKCS12.<init>(PKCS12)
at oracle.security.pki.OracleKeyStoreSpi.b(OracleKeyStoreSpi)
at oracle.security.pki.OracleSecretStore.setStoreInWallet(OracleSecretStore)
at oracle.security.pki.OracleWallet.setSecretStore(OracleWallet)
at oracle.sysman.ias.studio.jmx.SecureWalletManager.setEntry(SecureWalletManager.java:129)
at oracle.sysman.ias.studio.jmx.JMXUserManager._store(JMXUserManager.java:307)
at oracle.sysman.ias.studio.jmx.JMXUserManager.setCredential(JMXUserManager.java:250)
Can you guys give any insight regards to the same, am not having any clue.
Cheers
Dhrubo
Edited by: Dhrubo C on Aug 28, 2009 8:02 PM

Hi Dhrubo,
May be this is an issue with the JVM(IBM).Check Once.
Thanks,
katukota

Installation problem: Central Instance 6.40 Oracle on Linux 32

Hi everybody, I ran into some basic problems with an installation on Redhat EL4 with SUN SDK 1.4.2_12
here is where sapinst stops after selecting the java dvd:
somehow the getting the right Java home seems to be the problem, although environment variables are set...
SAPinst component stack:
========================
Preinstall|ind|ind|ind|ind|ind|0
Current script:
===============
if (!context.getBool("ci") && !context.getBool("di") && !installer.onWindows()) {
// we are running on Unix. We need JAVA_HOME for the user creation only.
WebAS.restore(context.get("WebASDump"));
var webas = new WebAS({sid:context.get("SID"), j2eeStandalone:context.getBool("standalone")});
if (webas.getAccountData(WebAS.SIDAdm).exists) {
 return;
if (context.get("JAVA_HOME") == "") {
if (installer.onOS400()) {
 installer.getCD("J2EE");
 context.set( "JAVA_HOME", os400_getJavaHome() );
} else {
 var versions = Java.readVersionFile(installer.getCD("J2EE"));
 context.set("JAVA_HOME", Java.getBestHome(versions.minVersion, versions.maxVersion));
here the sapinst_dev.log:
TRACE [sapinst.cpp:285]
 CSapInst::initMessaging()
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE[E] [syxxcfsmgt.cpp:269]
 CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE [iaxxccontrolfile.cpp:344]
 CControlFile::getMessageFilePath()
Running with messages from /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
TRACE [sapinst.cpp:306]
 CSapInst::initMessaging()
This is SAPinst, version 642, build 703609
compiled on Nov 21 2004, 20:12:45
TRACE [sapinst.cpp:311]
 CSapInst::initMessaging()
Gui connected by user root from host localhost
TRACE [syuxcgroup.cpp:528]
 bool CSyUserImpl::isExistingOnOS()
checking existence of account group="root" gid="0" succeeded with true.
TRACE [syxxccache.cpp:208]
 CSyAccountCache::getGroupImpl(name="", sid="0", create=false, ISyProgressObserver* )
inserted account (root, 0, GROUP) into the accountcache.
TRACE [syxxsyshlp.cpp:133]
 syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
SSH_AGENT_PID = 3137
HOSTNAME = localhost
TERM = xterm
SHELL = /bin/bash
DESKTOP_STARTUP_ID =
HISTSIZE = 1000
GTK_RC_FILES = /etc/gtk/gtkrc:/root/.gtkrc-1.2-gnome2
WINDOWID = 35655351
SAPINST_EXEDIR_CD = .
QTDIR = /usr/lib/qt-3.3
USER = root
JRE_HOME = /usr/java/j2sdk1.4.2_12/jre
LD_LIBRARY_PATH = /tmp/sapinst_exe.3669.1153729381
LS_COLORS = no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
SSH_AUTH_SOCK = /tmp/ssh-WtPWyH3136/agent.3136
GNOME_KEYRING_SOCKET = /tmp/keyring-MMmk9C/socket
KDEDIR = /usr
SESSION_MANAGER = local/localhost:/tmp/.ICE-unix/3109
PATH = /usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/usr/java/j2sdk1.4.2_12/bin:/root/bin
DESKTOP_SESSION = default
MAIL = /var/spool/mail/root
JAVA_BINDIR = /usr/java/j2sdk1.4.2_12/bin
PWD = /root/backupmnt/temp/SAPWAS640LinuxOracle/32bitInstall/DVD_NW_04_SR1_Installation_Master/IM09_LINUX_32/SAPINST/UNIX/LINUX_32
INPUTRC = /etc/inputrc
JAVA_HOME = /usr/java/j2sdk1.4.2_12
LANG = en_US.UTF-8
SAPINST_EXE_DIR = /tmp/sapinst_exe.3669.1153729381
JAVA_VERSION = 1.4.2_12
GDMSESSION = default
SSH_ASKPASS = /usr/libexec/openssh/gnome-ssh-askpass
SHLVL = 2
HOME = /root
JDK_HOME = /usr/java/j2sdk1.4.2_12
GNOME_DESKTOP_SESSION_ID = Default
LOGNAME = root
DBUS_SESSION_BUS_ADDRESS = unix:abstract=/tmp/dbus-KeIbVNuZM7
LESSOPEN = |/usr/bin/lesspipe.sh %s
DISPLAY = :0.0
G_BROKEN_FILENAMES = 1
XAUTHORITY = /root/.Xauthority
COLORTERM = gnome-terminal
User: root, Id: 0
Effective user: root, Id: 0
Group: root, Id: 0
Effective group: root, Id: 0
Umask: 022
Resource Limits
===============
RLIMIT_CPU: maximum amount of CPU time in seconds current: unlimited maximum: unlimited
RLIMIT_FSIZE: maximum size of a file in bytes that may be created by a process current: unlimited maximum: unlimited
RLIMIT_DATA: maximum size of a process's heap in bytes current: unlimited maximum: unlimited
RLIMIT_STACK: maximum size of a process's stack in bytes current: 10485760 maximum: unlimited
RLIMIT_CORE: maximum size of a core file in bytes current: unlimited maximum: unlimited
RLIMIT_MEMLOCK: Locked-in-memory addess space. current: 32768 maximum: 32768
RLIMIT_NOFILE: one more than the maximum value that the system may assign to a newly created descriptor current: 1024 maximum: 1024
RLIMIT_OFILE: one more than the maximum value that the system may assign to a newly created descriptor current: 1024 maximum: 1024
RLIMIT_NPROC: maximum number of child processes per real user ID current: 13184 maximum: 13184
RLIMIT_RSS: maximum resident set size in bytes current: unlimited maximum: unlimited
RLIMIT_AS: maximum size of a process's total available memory, in bytes current: unlimited maximum: unlimited
Working directory: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
TRACE [syuxctask.cpp:1242]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 3705
TRACE [syxxsyshlp.cpp:143]
 syslib::logSystemState()
System information
==================
uname: Linux localhost 2.6.9-11.EL #1 Fri May 20 18:17:57 EDT 2005 i686 i686 i386 GNU/Linux
RAM size (MB): 813.152
Swap size (MB): 258.852
Kernel Parameters:
==================
dev.cdrom.autoclose = 1
dev.cdrom.autoeject = 0
dev.cdrom.check_media = 0
dev.cdrom.debug = 0
dev.cdrom.info = CD-ROM information, Id: cdrom.c 3.20 2003/12/17
dev.cdrom.lock = 1
dev.parport.default.spintime = 500
dev.parport.default.timeslice = 200
dev.parport.parport0.autoprobe =
dev.parport.parport0.autoprobe0 =
dev.parport.parport0.autoprobe1 =
dev.parport.parport0.autoprobe2 =
dev.parport.parport0.autoprobe3 =
dev.parport.parport0.base-addr = 888 1912
dev.parport.parport0.devices.active = none
dev.parport.parport0.devices.lp.timeslice = 200
dev.parport.parport0.dma = -1
dev.parport.parport0.irq = -1
dev.parport.parport0.modes = PCSPP,TRISTATE
dev.parport.parport0.spintime = 500
dev.raid.speed_limit_max = 200000
dev.raid.speed_limit_min = 1000
dev.rtc.max-user-freq = 64
dev.scsi.logging_level = 0
fs.aio-max-nr = 65536
fs.aio-nr = 0
fs.binfmt_misc.register =
fs.binfmt_misc.status = enabled
fs.dentry-state = 22755 20214 45 0 0 0
fs.dir-notify-enable = 1
fs.file-max = 82562
fs.file-nr = 2480 0 82562
fs.inode-nr = 17270 1015
fs.inode-state = 17270 1015 0 0 0 0 0
fs.lease-break-time = 45
fs.leases-enable = 1
fs.mqueue.msg_max = 10
fs.mqueue.msgsize_max = 8192
fs.mqueue.queues_max = 256
fs.overflowgid = 65534
fs.overflowuid = 65534
fs.quota.allocated_dquots = 0
fs.quota.cache_hits = 0
fs.quota.drops = 0
fs.quota.free_dquots = 0
fs.quota.lookups = 0
fs.quota.reads = 0
fs.quota.syncs = 20
fs.quota.writes = 0
kernel.acct = 4 2 30
kernel.cad_pid = 1
kernel.cap-bound = -257
kernel.core_pattern = core
kernel.core_uses_pid = 1
kernel.ctrl-alt-del = 0
kernel.domainname = (none)
kernel.exec-shield = 1
kernel.exec-shield-randomize = 1
kernel.hostname = localhost
kernel.hotplug = /sbin/hotplug
kernel.modprobe = /sbin/modprobe
kernel.msgmax = 8192
kernel.msgmnb = 16384
kernel.msgmni = 16
kernel.ngroups_max = 65536
kernel.osrelease = 2.6.9-11.EL
kernel.ostype = Linux
kernel.overflowgid = 65534
kernel.overflowuid = 65534
kernel.panic = 0
kernel.panic_on_oops = 1
kernel.pid_max = 32768
kernel.print-fatal-signals = 0
kernel.printk = 6 4 1 7
kernel.printk_ratelimit = 5
kernel.printk_ratelimit_burst = 10
kernel.pty.max = 4096
kernel.pty.nr = 3
kernel.random.boot_id = 906671fa-2e46-4253-b860-368e36266a3a
kernel.random.entropy_avail = 3968
kernel.random.poolsize = 512
kernel.random.read_wakeup_threshold = 64
kernel.random.uuid = 32d988a2-1496-4f14-93ac-ff43f88ff37d
kernel.random.write_wakeup_threshold = 128
kernel.real-root-dev = 0
kernel.sem = 250 32000 32 128
kernel.shmall = 2097152
kernel.shmmax = 33554432
kernel.shmmni = 4096
kernel.suid_dumpable = 0
kernel.sysrq = 0
kernel.tainted = 1
kernel.threads-max = 26368
kernel.vdso = 0
kernel.version = #1 Fri May 20 18:17:57 EDT 2005
net.core.dev_weight = 64
net.core.divert_version = 0.46
net.core.lo_cong = 100
net.core.message_burst = 10
net.core.message_cost = 5
net.core.mod_cong = 290
net.core.netdev_max_backlog = 300
net.core.no_cong = 20
net.core.no_cong_thresh = 10
net.core.optmem_max = 10240
net.core.rmem_default = 110592
net.core.rmem_max = 131071
net.core.somaxconn = 128
net.core.wmem_default = 110592
net.core.wmem_max = 131071
net.ipv4.conf.all.accept_redirects = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.arp_announce = 0
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.arp_ignore = 0
net.ipv4.conf.all.bootp_relay = 0
net.ipv4.conf.all.disable_policy = 0
net.ipv4.conf.all.disable_xfrm = 0
net.ipv4.conf.all.force_igmp_version = 0
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.all.mc_forwarding = 0
net.ipv4.conf.all.medium_id = 0
net.ipv4.conf.all.proxy_arp = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.secure_redirects = 1
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.all.shared_media = 1
net.ipv4.conf.all.tag = 0
net.ipv4.conf.default.accept_redirects = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.default.arp_announce = 0
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.arp_ignore = 0
net.ipv4.conf.default.bootp_relay = 0
net.ipv4.conf.default.disable_policy = 0
net.ipv4.conf.default.disable_xfrm = 0
net.ipv4.conf.default.force_igmp_version = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.default.log_martians = 0
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.medium_id = 0
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.secure_redirects = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.default.shared_media = 1
net.ipv4.conf.default.tag = 0
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.accept_source_route = 0
net.ipv4.conf.eth0.arp_announce = 0
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.arp_ignore = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.disable_policy = 0
net.ipv4.conf.eth0.disable_xfrm = 0
net.ipv4.conf.eth0.force_igmp_version = 0
net.ipv4.conf.eth0.forwarding = 0
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.eth0.secure_redirects = 1
net.ipv4.conf.eth0.send_redirects = 1
net.ipv4.conf.eth0.shared_media = 1
net.ipv4.conf.eth0.tag = 0
net.ipv4.conf.lo.accept_redirects = 1
net.ipv4.conf.lo.accept_source_route = 1
net.ipv4.conf.lo.arp_announce = 0
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.arp_ignore = 0
net.ipv4.conf.lo.bootp_relay = 0
net.ipv4.conf.lo.disable_policy = 1
net.ipv4.conf.lo.disable_xfrm = 1
net.ipv4.conf.lo.force_igmp_version = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.medium_id = 0
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.lo.secure_redirects = 1
net.ipv4.conf.lo.send_redirects = 1
net.ipv4.conf.lo.shared_media = 1
net.ipv4.conf.lo.tag = 0
net.ipv4.icmp_echo_ignore_all = 0
net.ipv4.icmp_echo_ignore_broadcasts = 0
net.ipv4.icmp_ignore_bogus_error_responses = 0
net.ipv4.icmp_ratelimit = 1000
net.ipv4.icmp_ratemask = 6168
net.ipv4.igmp_max_memberships = 20
net.ipv4.igmp_max_msf = 10
net.ipv4.inet_peer_gc_maxtime = 120
net.ipv4.inet_peer_gc_mintime = 10
net.ipv4.inet_peer_maxttl = 600
net.ipv4.inet_peer_minttl = 120
net.ipv4.inet_peer_threshold = 65664
net.ipv4.ip_autoconfig = 0
net.ipv4.ip_default_ttl = 64
net.ipv4.ip_dynaddr = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_local_port_range = 32768 61000
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.ip_nonlocal_bind = 0
net.ipv4.ipfrag_high_thresh = 262144
net.ipv4.ipfrag_low_thresh = 196608
net.ipv4.ipfrag_secret_interval = 600
net.ipv4.ipfrag_time = 30
net.ipv4.neigh.default.anycast_delay = 99
net.ipv4.neigh.default.app_solicit = 0
net.ipv4.neigh.default.base_reachable_time = 30
net.ipv4.neigh.default.delay_first_probe_time = 5
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.gc_stale_time = 60
net.ipv4.neigh.default.gc_thresh1 = 128
net.ipv4.neigh.default.gc_thresh2 = 512
net.ipv4.neigh.default.gc_thresh3 = 1024
net.ipv4.neigh.default.locktime = 99
net.ipv4.neigh.default.mcast_solicit = 3
net.ipv4.neigh.default.proxy_delay = 79
net.ipv4.neigh.default.proxy_qlen = 64
net.ipv4.neigh.default.retrans_time = 99
net.ipv4.neigh.default.ucast_solicit = 3
net.ipv4.neigh.default.unres_qlen = 3
net.ipv4.neigh.eth0.anycast_delay = 99
net.ipv4.neigh.eth0.app_solicit = 0
net.ipv4.neigh.eth0.base_reachable_time = 30
net.ipv4.neigh.eth0.delay_first_probe_time = 5
net.ipv4.neigh.eth0.gc_stale_time = 60
net.ipv4.neigh.eth0.locktime = 99
net.ipv4.neigh.eth0.mcast_solicit = 3
net.ipv4.neigh.eth0.proxy_delay = 79
net.ipv4.neigh.eth0.proxy_qlen = 64
net.ipv4.neigh.eth0.retrans_time = 99
net.ipv4.neigh.eth0.ucast_solicit = 3
net.ipv4.neigh.eth0.unres_qlen = 3
net.ipv4.neigh.lo.anycast_delay = 99
net.ipv4.neigh.lo.app_solicit = 0
net.ipv4.neigh.lo.base_reachable_time = 30
net.ipv4.neigh.lo.delay_first_probe_time = 5
net.ipv4.neigh.lo.gc_stale_time = 60
net.ipv4.neigh.lo.locktime = 99
net.ipv4.neigh.lo.mcast_solicit = 3
net.ipv4.neigh.lo.proxy_delay = 79
net.ipv4.neigh.lo.proxy_qlen = 64
net.ipv4.neigh.lo.retrans_time = 99
net.ipv4.neigh.lo.ucast_solicit = 3
net.ipv4.neigh.lo.unres_qlen = 3
net.ipv4.route.error_burst = 5000
net.ipv4.route.error_cost = 1000
net.ipv4.route.flush =
net.ipv4.route.gc_elasticity = 8
net.ipv4.route.gc_interval = 60
net.ipv4.route.gc_min_interval = 0
net.ipv4.route.gc_thresh = 2048
net.ipv4.route.gc_timeout = 300
net.ipv4.route.max_delay = 10
net.ipv4.route.max_size = 32768
net.ipv4.route.min_adv_mss = 256
net.ipv4.route.min_delay = 2
net.ipv4.route.min_pmtu = 552
net.ipv4.route.mtu_expires = 600
net.ipv4.route.redirect_load = 20
net.ipv4.route.redirect_number = 9
net.ipv4.route.redirect_silence = 20480
net.ipv4.route.secret_interval = 600
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_adv_win_scale = 2
net.ipv4.tcp_app_win = 31
net.ipv4.tcp_bic = 1
net.ipv4.tcp_bic_beta = 819
net.ipv4.tcp_bic_fast_convergence = 1
net.ipv4.tcp_bic_low_window = 14
net.ipv4.tcp_dsack = 1
net.ipv4.tcp_ecn = 0
net.ipv4.tcp_fack = 1
net.ipv4.tcp_fin_timeout = 60
net.ipv4.tcp_frto = 0
net.ipv4.tcp_keepalive_intvl = 75
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_time = 7200
net.ipv4.tcp_low_latency = 0
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_max_syn_backlog = 1024
net.ipv4.tcp_max_tw_buckets = 180000
net.ipv4.tcp_mem = 196608 262144 393216
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_no_metrics_save = 0
net.ipv4.tcp_orphan_retries = 0
net.ipv4.tcp_reordering = 3
net.ipv4.tcp_retrans_collapse = 1
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_rmem = 4096 87380 174760
net.ipv4.tcp_sack = 1
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_syn_retries = 5
net.ipv4.tcp_synack_retries = 5
net.ipv4.tcp_syncookies = 0
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tso_win_divisor = 8
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_tw_reuse = 0
net.ipv4.tcp_vegas_alpha = 2
net.ipv4.tcp_vegas_beta = 6
net.ipv4.tcp_vegas_cong_avoid = 0
net.ipv4.tcp_vegas_gamma = 2
net.ipv4.tcp_westwood = 0
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_wmem = 4096 16384 131072
net.ipv6.bindv6only = 0
net.ipv6.conf.all.accept_ra = 1
net.ipv6.conf.all.accept_redirects = 1
net.ipv6.conf.all.autoconf = 1
net.ipv6.conf.all.dad_transmits = 1
net.ipv6.conf.all.force_mld_version = 0
net.ipv6.conf.all.forwarding = 0
net.ipv6.conf.all.hop_limit = 64
net.ipv6.conf.all.max_addresses = 16
net.ipv6.conf.all.max_desync_factor = 600
net.ipv6.conf.all.mtu = 1280
net.ipv6.conf.all.regen_max_retry = 5
net.ipv6.conf.all.router_solicitation_delay = 1
net.ipv6.conf.all.router_solicitation_interval = 4
net.ipv6.conf.all.router_solicitations = 3
net.ipv6.conf.all.temp_prefered_lft = 86400
net.ipv6.conf.all.temp_valid_lft = 604800
net.ipv6.conf.all.use_tempaddr = 0
net.ipv6.conf.default.accept_ra = 1
net.ipv6.conf.default.accept_redirects = 1
net.ipv6.conf.default.autoconf = 1
net.ipv6.conf.default.dad_transmits = 1
net.ipv6.conf.default.force_mld_version = 0
net.ipv6.conf.default.forwarding = 0
net.ipv6.conf.default.hop_limit = 64
net.ipv6.conf.default.max_addresses = 16
net.ipv6.conf.default.max_desync_factor = 600
net.ipv6.conf.default.mtu = 1280
net.ipv6.conf.default.regen_max_retry = 5
net.ipv6.conf.default.router_solicitation_delay = 1
net.ipv6.conf.default.router_solicitation_interval = 4
net.ipv6.conf.default.router_solicitations = 3
net.ipv6.conf.default.temp_prefered_lft = 86400
net.ipv6.conf.default.temp_valid_lft = 604800
net.ipv6.conf.default.use_tempaddr = 0
net.ipv6.conf.eth0.accept_ra = 1
net.ipv6.conf.eth0.accept_redirects = 1
net.ipv6.conf.eth0.autoconf = 1
net.ipv6.conf.eth0.dad_transmits = 1
net.ipv6.conf.eth0.force_mld_version = 0
net.ipv6.conf.eth0.forwarding = 0
net.ipv6.conf.eth0.hop_limit = 64
net.ipv6.conf.eth0.max_addresses = 16
net.ipv6.conf.eth0.max_desync_factor = 600
net.ipv6.conf.eth0.mtu = 1500
net.ipv6.conf.eth0.regen_max_retry = 5
net.ipv6.conf.eth0.router_solicitation_delay = 1
net.ipv6.conf.eth0.router_solicitation_interval = 4
net.ipv6.conf.eth0.router_solicitations = 3
net.ipv6.conf.eth0.temp_prefered_lft = 86400
net.ipv6.conf.eth0.temp_valid_lft = 604800
net.ipv6.conf.eth0.use_tempaddr = 0
net.ipv6.conf.lo.accept_ra = 1
net.ipv6.conf.lo.accept_redirects = 1
net.ipv6.conf.lo.autoconf = 1
net.ipv6.conf.lo.dad_transmits = 1
net.ipv6.conf.lo.force_mld_version = 0
net.ipv6.conf.lo.forwarding = 0
net.ipv6.conf.lo.hop_limit = 64
net.ipv6.conf.lo.max_addresses = 16
net.ipv6.conf.lo.max_desync_factor = 600
net.ipv6.conf.lo.mtu = 16436
net.ipv6.conf.lo.regen_max_retry = 5
net.ipv6.conf.lo.router_solicitation_delay = 1
net.ipv6.conf.lo.router_solicitation_interval = 4
net.ipv6.conf.lo.router_solicitations = 3
net.ipv6.conf.lo.temp_prefered_lft = 86400
net.ipv6.conf.lo.temp_valid_lft = 604800
net.ipv6.conf.lo.use_tempaddr = -1
net.ipv6.icmp.ratelimit = 1000
net.ipv6.ip6frag_high_thresh = 262144
net.ipv6.ip6frag_low_thresh = 196608
net.ipv6.ip6frag_secret_interval = 600
net.ipv6.ip6frag_time = 60
net.ipv6.mld_max_msf = 10
net.ipv6.neigh.default.anycast_delay = 99
net.ipv6.neigh.default.app_solicit = 0
net.ipv6.neigh.default.base_reachable_time = 30
net.ipv6.neigh.default.delay_first_probe_time = 5
net.ipv6.neigh.default.gc_interval = 30
net.ipv6.neigh.default.gc_stale_time = 60
net.ipv6.neigh.default.gc_thresh1 = 128
net.ipv6.neigh.default.gc_thresh2 = 512
net.ipv6.neigh.default.gc_thresh3 = 1024
net.ipv6.neigh.default.locktime = 0
net.ipv6.neigh.default.mcast_solicit = 3
net.ipv6.neigh.default.proxy_delay = 79
net.ipv6.neigh.default.proxy_qlen = 64
net.ipv6.neigh.default.retrans_time = 1000
net.ipv6.neigh.default.ucast_solicit = 3
net.ipv6.neigh.default.unres_qlen = 3
net.ipv6.neigh.eth0.anycast_delay = 99
net.ipv6.neigh.eth0.app_solicit = 0
net.ipv6.neigh.eth0.base_reachable_time = 30
net.ipv6.neigh.eth0.delay_first_probe_time = 5
net.ipv6.neigh.eth0.gc_stale_time = 60
net.ipv6.neigh.eth0.locktime = 0
net.ipv6.neigh.eth0.mcast_solicit = 3
net.ipv6.neigh.eth0.proxy_delay = 79
net.ipv6.neigh.eth0.proxy_qlen = 64
net.ipv6.neigh.eth0.retrans_time = 1000
net.ipv6.neigh.eth0.ucast_solicit = 3
net.ipv6.neigh.eth0.unres_qlen = 3
net.ipv6.neigh.lo.anycast_delay = 99
net.ipv6.neigh.lo.app_solicit = 0
net.ipv6.neigh.lo.base_reachable_time = 30
net.ipv6.neigh.lo.delay_first_probe_time = 5
net.ipv6.neigh.lo.gc_stale_time = 60
net.ipv6.neigh.lo.locktime = 0
net.ipv6.neigh.lo.mcast_solicit = 3
net.ipv6.neigh.lo.proxy_delay = 79
net.ipv6.neigh.lo.proxy_qlen = 64
net.ipv6.neigh.lo.retrans_time = 1000
net.ipv6.neigh.lo.ucast_solicit = 3
net.ipv6.neigh.lo.unres_qlen = 3
net.ipv6.route.flush =
net.ipv6.route.gc_elasticity = 0
net.ipv6.route.gc_interval = 30
net.ipv6.route.gc_min_interval = 0
net.ipv6.route.gc_thresh = 1024
net.ipv6.route.gc_timeout = 60
net.ipv6.route.max_size = 4096
net.ipv6.route.min_adv_mss = 1
net.ipv6.route.mtu_expires = 600
net.token-ring.rif_timeout = 600000
net.unix.max_dgram_qlen = 10
sunrpc.nfs_debug = 0
sunrpc.nfsd_debug = 0
sunrpc.nlm_debug = 0
sunrpc.rpc_debug = 0
sunrpc.tcp_slot_table_entries = 16
sunrpc.udp_slot_table_entries = 16
vm.block_dump = 0
vm.dirty_background_ratio = 10
vm.dirty_expire_centisecs = 3000
vm.dirty_ratio = 40
vm.dirty_writeback_centisecs = 500
vm.hugetlb_shm_group = 0
vm.laptop_mode = 0
vm.legacy_va_layout = 0
vm.lower_zone_protection = 0
vm.max_map_count = 65536
vm.min_free_kbytes = 918
vm.nr_hugepages = 0
vm.nr_pdflush_threads = 2
vm.overcommit_memory = 0
vm.overcommit_ratio = 50
vm.page-cluster = 3
vm.swappiness = 60
vm.vfs_cache_pressure = 100
TRACE
Running with control file control.xml version 642 and changelist 703273
TRACE[E] [syxxcfsmgt.cpp:269]
 CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE [iaxxccontrolfile.cpp:142]
 CControlFile::getKeydbControlFileName()
Running with keydb file keydb.xml
TRACE[E] [syxxcfsmgt.cpp:269]
 CSyFileSystemMgtImpl::getNode(const CSyPath &product.catalog) const
Node product.catalog does not exist.
TRACE [iaxxccontrolfile.cpp:235]
 CControlFile::getDialogControlFileName()
Running with dialog control file dialog.xml
TRACE [iaxxccontrolfile.cpp:184]
 CControlFile::getResourecFileName()
Running with resource file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/helppool.xml
INFO 2006-07-24 10:23:29 [syxxcfile.cpp:446]
 CSyFileImpl::copy(const CSyPath & q0w9e9r8t7.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2006-07-24 10:23:29 [syuxcpath.cpp:369]
 CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/q0w9e9r8t7.1.xml.
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:83]
 load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
 load()
Opened iaccdlib.so
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:108]
 load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|checkRuntimeSystem
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:83]
 load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
 load()
Opened iamodos.so
INFO 2006-07-24 10:23:30 [iaxxclib.cpp:108]
 load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step checkRuntimeSystem with key Preinstall|ind|ind|ind|ind|ind|0|checkRuntimeSystem has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|SetDefaults
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step SetDefaults with key Preinstall|ind|ind|ind|ind|ind|0|SetDefaults has been executed successfully.
INFO 2006-07-24 10:23:31 [syxxcfile.cpp:446]
 CSyFileImpl::copy(const CSyPath & /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml, ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.xml to: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
INFO 2006-07-24 10:23:31 [syuxcpath.cpp:369]
 CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/keydb.1.xml.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diSummarize
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step diSummarize with key Preinstall|ind|ind|ind|ind|ind|0|diSummarize has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step Preinstall|ind|ind|ind|ind|ind|0|diProgress
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step diProgress with key Preinstall|ind|ind|ind|ind|ind|0|diProgress has been executed successfully.
INFO 2006-07-24 10:23:32 [syuxcpath.cpp:369]
 CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/summary.html.
PHASE 2006-07-24 10:23:32 [iaxxcwalker.cpp:416]
 CDomWalker::printPhaseInfo()
Prepare the installation program.
INFO 2006-07-24 10:23:48 [iaxxcwalker.cpp:59]
 CDomWalker::walk()
Installation start: Monday, 24 July 2006, 10:23:26; installation directory: /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST; product to be installed: SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System
TRACE [iaxxclib.cpp:83]
 load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
 load()
Opened iamodora.so
TRACE [iaxxclib.cpp:108]
 load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:398]
 CController::activateEvaluator()
The controller registered the module COraInputChecker
TRACE [iaxxclib.cpp:83]
 load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
 load()
Opened iamodada.so
TRACE [iaxxclib.cpp:108]
 load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:398]
 CController::activateEvaluator()
The controller registered the module CIaSdbActor
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|fillContext
INFO 2006-07-24 10:23:48 [iaxxclib.cpp:83]
 load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
 load()
Opened iajsmod.so
INFO 2006-07-24 10:23:48 [iaxxclib.cpp:108]
 load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
t_J2EE_Dialogs.remove(WHERE 1=1)
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
t_J2EE_Dialogs.insertRow({
di:false
oneHost:true
}), inserting
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step fillContext with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|fillContext has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|readProductXml
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
Reading additional shipment information from product.xml...
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
tProductInfo.updateRow({
Name:WebAs
Version:640
}, WHERE ROWNUM=0), updating
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
IA_CONTR_DBPLATFORM.updateRow({
DBPLATFORM:ORA
}, WHERE ROWNUM=0), updating
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
Table: tWhat
Name:What
Value:INST
Name:InstanceType
Value:DI
Name:DbType
Value:NEWDB
Name:DataType
Value:SAP
Name:MigType
Value:STD
Name:INQMY
Value:NO
Name:IsCluster
Value:NO
Name:IsClusterA
Value:NO
Name:IsClusterB
Value:NO
Name:UNICODE
Value:YES
Name:Db6Engine
Value:EE
Name:IGS
Value:YES
Name:CCM4X
Value:NO
Name:HETFS
Value:false
Name:LCCLIENT
Value:false
Name:J2EE630
Value:false
Name:DB2Connectivity
Value:DRDA
Name:SDM_JDBCDRIVER_DB4
Value:engine
Name:LCUSERDATAADMIN
Value:false
Name:SeparateSCS
Value:false
Name:EEENodeNumber
Value:EEENode0
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step readProductXml with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|readProductXml has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
t_systems.remove(WHERE 1=1)
INFO 2006-07-24 10:23:49
 CJSlibModule::writeInfo_impl()
Looking for SAP system instances installed on this host...
INFO 2006-07-24 10:23:49
 CJSlibModule::writeInfo_impl()
No installed instances found!
TRACE [syxxcnamrs.cpp:278]
 PSyHostsEntry CSyIPNameResolverImpl::getHostByName(const iastring& hostName) const
IP name localhost resolves to IP address(es): 127.0.0.1
TRACE [syxxcnamrs.cpp:208]
 PSyHostsEntry CSyIPNameResolverImpl::getHostByAddress(const iastring& ipAddress) const
IP address 127.0.0.1 resolves to IP name(s): localhost
TRACE [iaxxbhosts.cpp:674]
 CIaOsHosts::resolveHostName()
hostname after reverse lookup is: localhost
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
shells.updateRow({
shell:/bin/bash
}, WHERE shell='/bin/bash'), inserting
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step setDefaults with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|DNSCheck
INFO 2006-07-24 10:23:50
 CJSlibModule::writeInfo_impl()
DNS is configured correctly.
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step DNSCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|DNSCheck has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|MemoryCheck
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step MemoryCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|MemoryCheck has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|virtualHostCheck
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step virtualHostCheck with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|virtualHostCheck has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askWhat
INFO 2006-07-24 10:23:51 [iaxxclib.cpp:83]
 load()
Working directory changed to /tmp/sapinst_exe.3669.1153729381.
TRACE [iaxxclib.cpp:165]
 load()
Opened iamodutl.so
INFO 2006-07-24 10:23:51 [iaxxclib.cpp:108]
 load()
Working directory changed to /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step askWhat with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askWhat has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askPrep
TRACE [iaxxgenimp.cpp:189]
 showDialog()
showing dlg d_webas630_prepare_ci_unix
TRACE [iaxxgenimp.cpp:205]
 showDialog()
<dialog sid="d_webas630_prepare_ci_unix">
<dialog/>
TRACE [iaxxgenimp.cpp:845]
 showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:98]
 CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE [iaxxejsexp.cpp:208]
 EJS_Installer::writeTraceToLogBook()
profile directory '/sapmnt/J2E/profile' does not exist. Returning undefined.
TRACE [iaxxgenimp.cpp:212]
 showDialog()
<dialog sid="d_webas630_prepare_ci_unix">
<dialog/>
TRACE [iaxxccntrl.cpp:493]
 CController::stepExecuted()
The step askPrep with key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|askPrep has been executed successfully.
TRACE [iaxxcdgprc.cpp:635]
 CDialogProcessor::processDialogs()
Executing dialog step J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|getJavaHome
TRACE [iaxxgenimp.cpp:189]
 showDialog()
showing dlg diCdServerMissingPackageWithCdName
TRACE [iaxxgenimp.cpp:205]
 showDialog()
<dialog sid="diCdServerMissingPackageWithCdName">
<dialog/>
TRACE [iaxxgenimp.cpp:845]
 showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:98]
 CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE [iaxxgenimp.cpp:212]
 showDialog()
<dialog sid="diCdServerMissingPackageWithCdName">
<dialog/>
INFO 2006-07-24 10:24:17 [syxxcfile.cpp:446]
 CSyFileImpl::copy(const CSyPath & ., ISyNode::eCopyMode 3, ISyProgressObserver*) const
Copying file /root/backupmnt/temp/51030724_2/DVD_NW_04_SR1_SAP_Web_AS_JAVA/J2EE_OSINDEP/JDKVersion.xml to: ..
INFO 2006-07-24 10:24:17 [syuxcpath.cpp:369]
 CSyPath::createFile()
Creating file /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/JDKVersion.xml.
TRACE [syuxctask.cpp:1242]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 3706
ERROR 2006-07-24 10:24:17 [iaxxbprocess.cpp:927]
 CIaOsProcess::getReturnCode_impl()
FSL-04005 Unable to wait for process with ID 3706. No child processes
ERROR 2006-07-24 10:24:17 [iaxxbprocess.cpp:948]
 CIaOsProcess::getReturnCode_impl()
FSL-04006 A system call failed due to unknown reasons: A process could not be waited for. No child processes.
TRACE [iaxxejsbas.hpp:270]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::ESyException: A process could not be waited for. No child processes
WARNING 2006-07-24 10:24:17 [iaxxccntrl.cpp:477]
 CController::stepExecuted()
The step getJavaHome with step key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|getJavaHome was executed with status ERROR.
TRACE [iaxxcsihlp.hpp:301]
 main()
An error occurred during the installation of component SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System. Press the log view button to get extended error information or press OK to terminate the installation. Log files are written to SAP NetWeaver '04 Support Release 1> Java System> Oracle> Central System> Custom Installation - Java System.
TRACE [iaxxgenimp.cpp:845]
 showDialog()
waiting for an answer from gui
TRACE [iaxxdlghnd.cpp:180]
 CDialogHandler::doHandleDoc()
ACTION_OK received
WARNING 2006-07-24 10:24:41 [iaxxcsihlp.hpp:250]
 main()
An error occurred during the installation.
Has anybody an idea whats wrong here?
thanx

Thanx Jeff!
and sorry for replying so late
like with many other things, reading notes carefully can help a lot
problem was solved by setting
LD_ASSUME_KERNEL=2.4.1
for sapinst as described in sap note 722273

OWB Installation problem on AIX 5.2

Hi,
We are trying to install OWB 9.2.0.2.8 on IBM AIX 5.2 using the download version from OTN. Following installation instructions, we have removed all references to existing ORACLE_HOME in the environment variables: CLASSPATH, PATH, LIBPATH and LD_LIBRARY_PATH.
When we try to run installer from owb92aix/Disk1/runInstaller
following error message appears: Can't find libjvm.a
and the installation aborts.
Any help is appreciated.
Thanks,
Aravind

Yes, we do have the java virtual machine installed in /usr/java131/jre/bin and it is referenced in PATH variable.
When we extracted the downloaded tar file for AIX, the file libjvm.a exists in the extracted directory. We do not know why the installer is unable to find it.
Thanks,
Aravind

Sun Directory Server 5.2 installation problem on AIX 5.2

Hi,
Am newbie to sun ds5.2 and I got stuck during installation for last 2 days. Could you pls guide to resolve this issue. Please error msg below
Checking disk space...
The following items for the product Directory Server will be installed:
Product: Directory Server
Location: /Sun/mps
Space Required: 141.70 MB
Sun ONE Directory Suite
Sun ONE Directory Server
Sun ONE Directory Console Support
Sun ONE Administration Services
Sun ONE Administration Server
Sun ONE Administration Console
Sun ONE Server Console
Sun ONE Server Console Core
Java Runtime Environment
Sun ONE Server Basic Libraries
Ready to Install
1. Install Now
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}? 1
Installing Directory Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
[slapd-bmpdev4]: starting up server ...
error:server:The server could not be started due to invalid command syntax or
operating system resource limits.
system_errno:2
Configuration of the Directory Server failed.
Warning creating dbswitch.conf
Warning creating ssusers.conf
Error Directory Server configuration failure
Checking connection to the Configuration Directory Server... failed.
The Admininistration Server cannot be configured.
Error Administration Server configuration failure
Error Configuration of the server(s) failed.
Installation Details:
Product Result More Information
1. Directory Server Partially Installed. Refer to "Details..." for more
information. Available
2. Done
Enter the number corresponding to the desired selection for more
information, or enter 2 to continue [2] {"!" exits}: 2
thanks
Bala

You are correct. Dir 5.2 is not certified for AIX 5.2. It does install though. Like a previous reponse stated. Check the permissions for the user you are installing with and the file system you are installing to. Make certain you have enough disk space. My install took 150 MB of disk space. Finally, Dir 5.2 creates the file "/var/adm/sw/productregistry" during install. If you do not have permissions to /var/adm/sw, you may have troubles.
Tim
Computer Systems Engineer
Komatsu Canada Limited

Installation Problem in SAPNW7.0 with Oracle on RHEL5.4

Hi Everyone,
I am installing SAP NETWEAVER7.0 SR3 with ORACLE 10.2.0.4 on RHEL5.4 Operating System. I have installed the java
and i have install the ORACLE 10.2.0.4 Successfully. I set the environment variable in vi .bash_profile and i set the kernal parameters with their values in vi /etc/sysctl.conf file then run the command sysctl -p. Later i run the ./sapinst script the cd /NW7.0/
BS_Installation Master_2005/ IM_LINUX_x86_64. It went fine up to the 24th phase. At the 24th phase "start instance" i got the error.
The error message is
" ERROR 2010-10-10 12:03:03.542
CJS-20022 Could not start instance 'DVEBMGS00' of SAP system QAS"
I did try my level best to resolve it. Can any one tell me what could be the issue and how to resolve it.
Thanks

startdb.log
Sun Oct 10 16:45:11 IST 2010
LOGFILE FOR STARTING ORACLE
Trying to start QAS database ...
Sun Oct 10 16:45:11 IST 2010
checking required environment variables
ORACLE_HOME is >/oracle/QAS/102_64<
ORACLE_SID is >QAS<
Sun Oct 10 16:45:11 IST 2010
check initora
Sun Oct 10 16:45:11 IST 2010
check initora
Sun Oct 10 16:45:11 IST 2010
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 10-OCT-2010 16:45:11
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/usr/sap/QAS/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = quality) (PORT = 1527))) (CONNECT_DATA = (SID = QAS) (GLOBAL_NAME = QAS.WORLD)))
OK (10 msec)
tnsping: V2 connect to QAS
Sun Oct 10 16:45:11 IST 2010
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Sun Oct 10 16:45:11 IST 2010
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Sun Oct 10 16:45:12 IST 2010
starting database
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Oct 10 16:45:12 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-09925: Unable to create audit trail file
Linux-x86_64 Error: 13: Permission denied

Solution Manager 4.0 Installation Error AIX 5.3 / Oracle 10.2.0.1

Hi All,
I am facing an error in the installation step of Solution Manager 4.0 on AIX 5.3 / Oracle 10.2.0.1
Hostname : INXXXXSAPIDES
The ABAP instance is not coming up and the Installation failed.I tried to bring up the instance manually.But was not successful.
Workprocess traces :
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fa070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fa470
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 0x7000001e0000000, size 150000K)
A abap/pxa = shared unprotect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x113a1f5c0
=> Stack address = 0xfffffffffffded0
=> Stack low = 0xfffffffffffb5e0
=> Stack high = 0xffffffffffff810
=> Stack Trace:
 pthread_kill() at 0x900000000490650
 praise() at 0x900000000490070
 raise() at 0x900000000059624
 abort() at 0x900000000084a90
TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T0/M0 [thxxhead.c 10721]

DEV_DISP 
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Sat Jul 28 22:41:18 2007
ERROR => W0 (pid 442462) died [dpxxdisp.c 14319]
ERROR => W2 (pid 635048) died [dpxxdisp.c 14319]
ERROR => W3 (pid 598164) died [dpxxdisp.c 14319]
ERROR => W4 (pid 770084) died [dpxxdisp.c 14319]
ERROR => W5 (pid 815142) died [dpxxdisp.c 14319]
ERROR => W6 (pid 761862) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W7 (pid 671804) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W8 (pid 630958) died [dpxxdisp.c 14319]
ERROR => W9 (pid 622786) died [dpxxdisp.c 14319]
ERROR => W10 (pid 549070) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W11 (pid 544802) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W12 (pid 508062) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa1 --> 0x81
Sat Jul 28 22:41:55 2007
ERROR => W1 (pid 802934) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
stderr1
Command: dw.sapSM4_DVEBMGS10
 pf=/usr/sap/SM4/SYS/profile/SM4_DVEBMGS10_INSISCSAPIDES
ICM up and operational (pid: 675892) ***
timezone value meaningless. BSD libraries linked?
work process W1 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W2 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W12 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
.timezone value meaningless. BSD libraries linked?
work process W4 died => ThSigHandler: signal
work process W8 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
Can someone please help me in this.
Thanks
Siva
Message was edited by:
 siva sakthi

I found the solution..
There was a a problem in the timezone setting for the server.After changing it and rebooting it worked perfectely.

Java instance installation fails for EP 6.0 SR1 on AIX 5.1/Oracle 9.2

Hi Friends
I am currently installing EP 6.0 SR1 on NW04 on AIX 5.2 & Oracle 9.2.0.1, last few steps of installation I applied Oracle patchset 9.2.0.5. I am using the option SAPNW SR1-> Java system -> Central system ->custom installation-> Java system, the installation stops at step 30(Load Java database content) of 36 giving the message "java.sql.SQLException:Ioexception: The Network adapter could not establish the connection.
I am also attaching the contents of log jload.log & jload.java.log. Really appreciate if somebody who has faced similar problem or knows the solution can provide a tip, thanks in advance.
CDBAXD08:oraepd 27> more jload.log
11.03.05 20:05 com.sap.inst.jload.Jload main
INFO: Jload -sec
EPD,jdbc/pool/EPD,/sapmnt/EPD/global/security/data/SecStore.properties,/
sapmnt/EPD/global/
security/data/SecStore.key -dataDir /epinst/was_java/J2EE_OSINDEP/J2EE-
ENG/JDMP -job /tmp/sapinst_instdir/N
W04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/IMPORT.XML -
log /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
/jload.log
11.03.05 20:05 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
java.sql.SQLException: Io exception: The Network Adapter could not
establish the connection
CDBAXD08:oraepd 28> more jload.java.log
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
ClassicVM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM)
build caix64142ifx-20041126 (JIT en
abled: jitc))
Mar 11, 2005 8:05:10 PM com.sap.inst.jload.Jload main
INFO: Jload -sec
EPD,jdbc/pool/EPD,/sapmnt/EPD/global/security/data/SecStore.properties,/
sapmnt/EPD/global/
security/data/SecStore.key -dataDir /epinst/was_java/J2EE_OSINDEP/J2EE-
ENG/JDMP -job /tmp/sapinst_instdir/N
W04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/IMPORT.XML -
log /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
/jload.log
Mar 11, 2005 8:05:15 PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
java.sql.SQLException: Io exception: The Network Adapter could not
establish the connection
FYI the SID name given to the Java instance is EPD & the output of
java -version of the 3 id's root, epdadm & oraepd is as attached.
CDBAXD08:epdadm 1> java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM)
build caix64142ifx-20041126 (JIT enabled: jitc))
Thanks & Rgds,
Abhishek

Hi Abhishek,
I'm trying to install EP 6.0 SR1 on Aix and DB2. I'm having problems with Secure Store installation step (Encryption: JCE and Crypto Toolkit).
Did you have any problems with this ? From which place did you get the JCE file ?
Thanks for your help, I really appreciate it !
Regards from Mexico,
Diego

Installation problem on Linux Slackware 7.1 (Oracle 8i)

I try install Oracle 8i Enterprise in Linux Slackware 7.1 (kernel 2.2.16), but the runInstaller don't work.
I read the installation manuals and make all steps, but the runInstaller don't work.
I get this message:
./runInstaller
The Java RunTime Environment was not found at bin/jre. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.1.8 or higher and try again.
: No such file or directory
I try --> ln -s /usr/local/jre118_v3 /usr/local/java
and --> ln -s /usr/local/jre118_v3 /usr/local/jre
and put in PATH --> /usr/local/jre/bin
Nothing work's.
Somebody can help me ?????
Thank's ....

Hello!
I also tried to install Oracle 8.1.6.1 (after giving up the 8.0.5 installation due to segmentation faults all over..), it also failed.
After trying to install Oracle 8.1.6.1 on RedHat 7.0 and it still crashed, i sent a mail to some guru that wrote the oracle-how-to document for redhat, here is what he replied.
My guess is that this also applies to the newest slackware version, because i presume that slackware 7.0 also use the newest glibc libraries;
Thanks for the feedback.
Oracle 8.1.6 does not work under Red Hat >Linux 7. Yes, that's the problem
that I mentioned in the doc--you get to 80% >and the DBCA crashes and the
Oracle executables die.
I've heard, but I haven't tried it myself, >that if you install the latest
glibc errata (2.1.94) then the DBCA >completes but the Oracle executables
still die. The DBCA problem was apparently >a Java issue that is fixed in
the errata. But you're still out of luck >since the exes won't work.
It might appear that this is a problem with >Red Hat Linux 7. But it appears
that it is a problem with some assumptions >that Oracle made, assumptions
that worked with glibc 2.1.3 (the C library >included with RHL 6.2) but which
prove false with later glibc versions. As >other Linux distributions adopt
the new glibc Oracle will fail to work on >them as well.
The best advice I can give at this point is >to install and run Oracle on
Red Hat Linux 6.2. Hopefully Oracle will >address the glibc issues with the
8.1.7 release.
ChrisI then installed Orace on RedHat 6.1 and it worked like a dream.
Maybe you guys should try your luck on an earier version of slackware?
Hope that helped...
null

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Oracle 8.1.6 on HP-UX 11.0 - installation problem

We have been trying to install ORACLE 8i (8.1.6) release 2 on a HP_UX 11.0 Server, and faced errors when we started installation.`
As per the install notes, we had to mount the CD media using pfs_mount with file system type set to rrip(i.e.iso9660 format with Rockridge extensions). Instructions are as follows.
1.Use a system editor to add the following line to the /etc/pfs_fstab file.
/dev/dsk/c5t2d0 /SD_CDROM pfs-rrip xlat=unix 0 0
2.Run the following file.
# nohup /usr/sbin/pfs_mountd &
3.Run the following file.
# nohup /usr/sbin/pfsd &
4.Insert the CD-ROM into the tray and run the following to mount the CD-ROM:
# /usr/sbin/pfs_mount /SD_CDROM
But we are not able to mount the CD with this option. It is giving an error "not rrip"
We are able to mount it with the type set to only iso9660. But after it is mounted thus, the install script in
./install/hpunix/runinst~6. is failing with the foll. message:
The Java Runtime Environment was not found at
../stage/components/oracle.swd.jre/1.1.8.0.1/DataFiles/Expanded/jre/hpun ix/bin/jre.
Hence the Oracle Universal Installer cannot be run.
Where as the above mentioned files are available on the CD but with a different name structure
./stage/compon~9/orac~214/1.1.8.~6/1/datafi~9/expanded/jre.
We need your help in resolving the problem.
We are contacting Oracle for support.
Thanks & regards,
Sujatha

Sorry - OTN has never had the HP version of 8i available for download from OTN. We just started posting HP versions with 9i: http://otn.oracle.com/tech/hp/content.html
Regards,
OTN
All, trying to download a copy of Oracle 8.1.7 for HP-UX 11.0. This download seems no longer to be available (just 9i) and judging by the other posts on this topic, Oracle dont seem to care either - this is not exactly good customer service!
***ORACLE - where have the 8.1.7 downloads gone, and when can we expect them back? *****
Seb Gevers
Director, IT Services
SVi (Galway)

Installation problem on AIX ( SAP4.7, Oracle-9i)

Similar Messages

Maybe you are looking for