Installation problem on Windows 2003
Hi All,
I have installed the saprfc extension on my laptop for testing purposes.
Definitions of my laptop: Windows XP, IIS 6, PHP 4.4.2, SAP GUI 640
Everything works fine and I can access the SAP through the web server on my laptop without any problem.
Now, after finishing my tests I installed my web application on a real production server with the following definitions: Windows 2003 server, IIS 6, PHP 4.4.2
As you can see the two differences are the operating system and the fact that I do not have a complete SAP GUI installation on the server I only located the librfc32.dll under the windows library.
My problem is that I get the message that the php_saprfc.dll extension cannot be loaded (I edited the php.ini).
Doe anyone have any idea why?
Thanks,
Roy
Hi,
I have an installation with my laptop WIN2003 server with apache web server instead of IIS, without problems.
Are you sure that in your php.ini is all OK?
Have you tried to copy the WIN2003 php.ini on your laptop and try to load saprfc.dll?
Lorenzo
Similar Messages
-
Xp_logininfo "Installation problem on windows 2003 with Sql 2005"
Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
SohailHi All,
This would solve your problem
First of all this error is <b>MSSQL error</b>.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason -
N1 SPS 6.0 Installation problem on windows 2003
Hello,
I have tried to install N1 SPS 6.0 on windows 2003. I was able to finish installlation successfully. But When I try to access tool from http://localhost:8080 , It is not working. I am new to tool , I am installing first time so not able to figure out. I have checked the service for master server is starting under windows services. What else do I need to check? Are there any prerequisite to install N1 SPS 6.0 Master Server on windows?
Thanks. Any help will be appreciated.
Thanks
Bhavika1. While installation did you configured http or https for UI ? I configured http
2. If https, did you provided the keystore file as part of installation or not? No
3. If https and opted to provide the keystore file after the installation? No
4. if you run 'netstat -an | more' can you find port 8080 in the list? I cannot see
5. are you finding any error messages in {install-dir}\server\bin\cr_server.out file? if so, can you share that error message
I cannot see cr_server.out file under C:\Program Files\N1 Service Provisioning System\6.0\server\bin that is my install directory
6. Related to N1 SPS, are you finding any errors in windows event log? if so, can you share the error message
7. From DOS command prompt, when you run "net start crserver60" or "net start postmaster60" or "net start crprepdb60" are you getting the following error? *
The requested service has already been started.
I see following message
C:\Documents and Settings\Administrator>net start crserver60
The N1 Service Provisioning System 6.0 Server service is starting.
The N1 Service Provisioning System 6.0 Server service was started successfully.
8. Do you have the local user postgres in your system What do u mean by local user ? I have installed postgres on my system with postgres user.
9. instead of using "http://localhost:8080", if you try to access the UI admin through "http://{windows-host-name}:8080", does it work? * I tried both way , it does not work * -
10g R2 Client Installation Problem on Windows 2003 64 bit itanium
Hi,
When I click on the setup.exe, i am getting the following..and not getting setup screen
Using paramFile: E:\oracle_client\10g_winIA_client_102010\client\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The commandline for unzip:
E:\oracle_client\10g_winIA_client_102010\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\DOCUME~1\SBOLLI~1\LOCALS~1\Temp\1\OraInstall2008-04-22_03-44-38PM"
The number of files bootstrapped for the jre is 528.
The number of files bootstrapped for the oui is 98.
what might be the problem, is this due to not having unzip software in the server.
Please help meJust check this link:
Oracle Installer crashes in Windows XP attempting to install 10g database
May be useful...
Amardeep Sidhu
http://www.amardeepsidhu.com -
Oracle EBS R12 installation problem in Windows 2003
Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AMI have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein -
Oracle 8 installation problem on windows 2003 server
Hi!everyone
while installing i'm getting the message "could not delete the windows nt services". The error is coming for the service "OracleTNSListener".
any solution?...
any info whether oracle 8 support has been stopped for all platforms/specific ones ?...where do i get that info ?....
plz help..Hi!
Is there any work around to that? Basically I have to test an upgrade from 8i to 10g on a Windows Server 2003 w/ SP1. I am not sure on what platform that 8i database is running on because is at a third-party location. -
Installation problem on windows server 2008 r2 datacenter edition 64bit
hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus -
Oracle database 11g release 2 installation problem on windows 7 (64-bit)
First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges -
Lightroom 3.2 Installation Problem on Windows 7 64-bit
Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets. -
Add-on installation problem in Windows Server 2003
Hi guys,
I have a problem when i want to install my add-on in the Windows Server 2003. The server gives me error :
Unable to load AddOnInstallAPI.dll
and when i try install using the same installer at the client station, everything is ok.
Does anybody have suggestion about that problem? I suspect the problem is the Windows' security that did not allowed me to load the .dll. Does anybody know how to set the security?
Thanks you,
Harianto NgI've found an answer on the similar question here, on the forum, saying that Windows 2003 is not a supported SAPBO Client OS.
In my experience I could not even set a reference to SAPbouicom.exe with a message "cannot load DLL"...
Natalya -
Installing problem on Windows 2003 Server 64 bit
Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
MatthiasHi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias -
Netweaver 2004s installation problem on Windows: Oracle 10G
Hi Friends,
I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
The server has 6GB RAM and has 5GB of free space on C: and a free sapce of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver 2004 S installation???
I am installing a central system.
First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
I chose Install MCOD and proceeded further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
Have any of you faced this problem ? Please let me know how you have proceeded further.
Before starting the installation one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system and even then i proceeded with the installation.
Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
Thanks
DiwakarHello Diwakar,
If you are just installing NW2004s then it is not mandatory to install Solution manager.
To increase the swap space --
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
you canIncrease swap space/page file here.
Do not install the system as MCOD, make the seperate database.
Do revert for further doubt.
Best Regards,
Sachin. -
ERP 6 installation Problem on windows clustring
i am installing SAP ERP 6 EHP4 on windows 2003 with clustering 2 nodes only and DB as MS SQL 2005. i have Domain controller on one node and other is member of it , i want ACTIVE/ACTIVE clustering , so i installed MS SQL on one node and on other node i installed ASCS from SAP High Availability environment, and now i am configuring the first NODE on MSCS step ,here after accepting the password of the two domain user , it gives the problem:- ****************************
Number value 0x-3f580000 is bigger than 0xFFFFFFFF *******************************
the last lines of sapinst.log files are like this :- *******************************
INFO 2010-08-18 14:13:31.984
Execute step dAskForKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
INFO 2010-08-18 14:14:01.298
Execute step dAskForSecondKernelDVD of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
INFO 2010-08-18 14:14:01.314
Execute step dAskForuserDomain of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
INFO 2010-08-18 14:14:03.126
Execute step dBuildAccountInformation of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
INFO 2010-08-18 14:14:03.142
Execute step dAskForUserPAsswords of component |MSCS_A|windows|ind|ind|ind|0|0|UserDialogs|windows |ind|ind|ind|2|0
INFO 2010-08-18 14:14:32.143
Execute step dCollectMSCSNodesInformations of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0
INFO 2010-08-18 14:14:32.174
Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0
WARNING[E] 2010-08-18 14:14:32.174
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
ERROR 2010-08-18 14:14:32.268
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
INFO 2010-08-18 14:14:44.237
An error occured and the user decided to retry the current step: "|MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters" .
WARNING[E] 2010-08-18 14:14:44.253
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
ERROR 2010-08-18 14:14:44.268
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
INFO 2010-08-18 14:14:44.878
An error occured and the user decided to retry the current step: "|MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParam eters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters" .
WARNING[E] 2010-08-18 14:14:44.893
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
Help Me if you can thank you in advance>> i am installing SAP ERP 6 EHP4 on windows 2003 with clustering 2 nodes only and DB as MS SQL 2005. i have Domain controller on one node and other is member of it
Installations on domain controllers are not supported:
Installation guide "2.2.4 Requirements for a High-Availability System":
<...>
You cannot use a host with a domain controller as an MSCS cluster node.
<...>
It's pretty clear why: If the first node, the domain controller, fails, the second node can't authenticate any more and hence the system won't start/run.
Markus -
[b]Error in installation database in Windows 2003 server[/b]
Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 10.1.0.2.0 in a machine that has Windows 2003 Server. On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
the following messages appear:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
In the alert.log appear:
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified O/S-Error: (OS 1) Incorrect function. !
I install in local mode, not remote and using Administrator user.
Help me, please!
Regards
CarlosHello,
There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
http://www.oracle.com/technology/tech/windows/faq.html#x86-64
Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
I hope that this costs(suits) us to solve our problems
A greeting -
Error in installation database in Windows 2003 server 64 bits
Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 9.2.6 in a machine that has Windows 2003 Server 64 bits
. On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
the following messages appear:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
I see the note 722966 and my procesador is EM64T
I install in local mode, not remote and using Administrator user.
Help me, please!Hello,
There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
http://www.oracle.com/technology/tech/windows/faq.html#x86-64
Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
I hope that this costs(suits) us to solve our problems
A greeting
Maybe you are looking for
-
How do I convert email and all attachments into pdf?
I have multiple emails with attachments that need to be converted to PDF. Using Adobe Pro 11 I can create an email that is pdf with the attachments embedded in their original format, but not as pdf. I can "un-embed" the attachments and convert to p
-
Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.
-
Hi, there was 2 things that I had to ignore during installing for being able to install and now my Iphone cannot be connected to my computer with Itune ???
-
My 20 gig iPod color display has been working fine for the past two years. Today, while playing music, my iPod suddenly froze. After resetting it, it asked what language to use on the interface. After choosing English, I realized that all my music wa
-
HP t5740e Installing XP instead of W7 embedded
Hi to all, I was wondering if it is possible to install Windows XP instead of W7 on my HP t5740e? I realise that it doesn't have a CD rom, but I know how to install XP via USB, so that's not a problem. The only problem could be the lack of drivers si