Installation PSE7 in Vista 32bit?

I successful installed PSE7 (German) in XP, but in Vista it blocks the start of Vista in standard mode. I have to start Vista in a lower mode and deinstall PSE7 in order to run the OS again in standard mode.The same is with Premiere Elements 7.
The computer is big and fast enough.
Who has an idea about the error?
Thank you in advance.
rafael_005

According to windows compatibility list Photoshop 7 is not compatible with Vista 64. Mine is preloaded on the Dell computer I just received and Editor will not work at all and Organizer will not import photos from my camera. Neither Dell nor Adobe techs have been able to help me and Dell will not give me a refund for the unusable software.

Similar Messages

Satellite L300D-21P - Installation of Windows Vista 32bit failed

Hi!
I have recently bought a Toshiba Satellite L300D-21P and now I wanted to install Windows Vista Business 32bit.
But the installation always stops at the point where the screen says "Completing installation ... ".
Do you have any idea what I have to do to solve this problem?
Thank you very much for your answers!
Greetz
Stefan

If you are using the Toshiba Recovery disk then you dont need to install SATA drivers.
If you are using Microsoft disk then you will need the SATA drivers.
But if the error message says that the installation is complete then the HDD has been recognized properly and you should not need the SATA drivers in such case.
> From where do I get the SATA-drivers?
It looks like your notebook supports AMD CPU and ATI chipset.
Graphic card driver contains the chipset driver and the necessary SATA drivers.
The graphic card driver contains the different folder and the drivers are placed in folder:
Packages\Drivers\SBDrv\Filter\NB

Post installation problems in vista 32bit

Sir
i am newbie.i installed 10gr2 in my vista,but sometimes its starting perfectly and sometimes not.Then i need to restart my machine and then only i am getting access in sql*plus.i have posted it here but the problem is still the same.[post installation problem its not solved yet|http://forums.oracle.com/forums/thread.jspa?threadID=930824&tstart=0] .
when the command maintained bellow is leaving no output at all.
emctl start dbconsoleIN the service panel is showing dbconsole status as server starting only.
what to do?
regards
Sayantan

Hans F wrote:
1) Vista is not an operating system. It is a family of operating systems. Which operating system within that family are you using?windows 7.
>
2) Oracle Database is designed to work on a server. It should have a static IP address and host name, or at least use a loopback adapter as a workaround. How is the IP address and host name on your Vista-xyz assigned?
using it for local machine in laptop.
HOST = FAXCOOLWAREZ037)(PORT = 1521)
>
Hopefully you are not using DHCP to assign the IP address, or you were sharp enough to install the loopback adapter first.

Error when installing itunes version 9 on Windows Vista 32bit

When trying to install itunes version 9 an error has come up before the installation is complete.
The error reads -
An error occurred during the installation of assembly
'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
HRESULT.0x800736133
Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
Thanks

Thanks Emma!
Ox800736B3
Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

Is OBI 11g is supported on Vista 32bit?

I am sorry I should have addressed this in a new thread, so here it is
I am having problems configuring OBI-11g on Vista Enterprise - SP1 - 32bit. The installation, however is successful.
The link provided is for: Release 10.1.3.2.1 for Microsoft Windows (http://download.oracle.com/docs/cd/E10352_01/doc/bi.1013/e10270/toc.htm#CEGGGCEG
) and it seems Vista is not supported in 10.1.x
Can anybody advise if OBI 11g is supported on Vista 32bit and if they have it running successfuly?
Thanks.

Hi,
I have the following confirmation from Oracle:
'From the certification Matrix, http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls#'Current System Certification'!A1
Only having OBIEE client is supported on Vista but not the server and that can be the reason that you are having issue. You need to choose from one of the supported Operating Systems for having the server installed.
As I am configuring OBIEE for server <-- it is currently recommended that vista will not support it.
Thanks.

MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
I’m asking you for a new superstructure on bios update .

Beta 2 or RC1 candidate???? RC1 should support..........
Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

ITunes crashes on startup (7.4.3.1 and previous versions on Vista 32Bit)

Deleting/moving the itunes library files (iTunes Music Library.xml and iTunes Library.itl) makes it work fine which leads me to believe it crashes when loading the playlist. But not always!
iTunes crashes on startup on my vista 32bit.
Even after I upgraded to 7.4.3.1 and reinstalled iTunes several times.
I've also tried reinstalling quicktime and selecting "Repair" to no avail.
Running it in XP2 compatibility mode doesn't help.
Disabling Aero doesn't help.
Whether or not my iPhone is plugged in or not seems to make no difference.
This is the error msg.
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 7.4.3.1
Application Timestamp: 46f9e539
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 00062613
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
Additional Information 1: 3121
Additional Information 2: cd54b1815dd1a98f8c82cbbbae6b50f8
Additional Information 3: cfbc
Additional Information 4: 4370a065bc45e009ac3228b1173ce35a

Crashes on windows xp pro sp2 as well.
A whole night wasted trying to trouble-shoot this bogus software.
Ipod touch returns to best-buy tomorrow.
Never to buy another apple product.
Love & Kisses.

Will OWB 10g Release 2 (10.2.0.3) for Vista 32bit work 100% on XP Pro

All,
I have a problem with installing Oracle Warehouse Builder 10g Release 2 (10.2.0.1), after the install i cannot run the design center. So I removed this software and installed the newest version (see title). But there is "Vista 32bit" in the download title. Now I installed this and it seems to be working but I don't want to see my future work become invalid after a while. I can't find in the documentation anything about this new version working on XP.
Anyone who can help me out pls.

Tash wrote:
It is not that I wnat Vista version but I couldn't get 10..2.0.3 XP version. If there is this version available for XP, I don't want vista but if it;s not available I am wondering if vista version works on XP like other softwares which latest alys works on previous version OS.Not in oracle. For oracle, you should use the correct version for the right o/s only.
Thank you for info. Can I get a XP version of 10.2.0.3 without having to patch from previous version?AFAIK, I don't think its possible. You have to install 10201 and than apply the patch to it to make it 10203.
HTH
Aman....

SAP WAS J2EE server installation on Windows Vista

Hi Experts,
Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
Is there SAP J2EE server also available with Vista compatibility ?
Regards,
Yomesh

> Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
>
> Is there SAP J2EE server also available with Vista compatibility ?
The problem with J2EE is the support status of the used JDK. Sun does not support 1.4.2 under Vista/Windows 2008, technically it works.
Markus

ERROR 1002 WHILE ROCOVERY DISK HP G60-441 US WINDOWS VISTA 32BIT

I HAVE HP G60-441US MODEL WITH WINDOWS VISTA 32BITS, PRODUCT NUMBER NW142UA. I TRY TO MAKE ROCOVERY DVD DISK WITH RECOVERY MANAGER BUT IT IS FIALED ON 2ND DVD. THEN I TRY TO RECOVERY WITH RECOVERY MANAGER IT SHOWS ME ERROR 1002 WHILE I PRESS OK ; COMPUTER IS RESTARTED AND BOOTMGR IS MISSING PRESS CLT+ALT+DEL FOR RESTART. AFTER THAT I CHECK HARD DRIVED MEMEROY IT IS ALSO FAILED. AND WHILE STATING COMPUTER IT SHOWS ME TO REPALCE BATTERY.
I DID ORDER RECOVERY DISK FROM HP SUPPORT AND REPLACEMENT BATTERY. IT TAKES ONE WEEK TO GET IT.
NOW I WANT TO KNOW THIS IS HARD DISK PROBLEM OR JUST SOFTWARE PROBLEM. I TRY TO DO FORMAT MY COMPUTER DUE TO BAD PROFORMANCE, TAKES TOO LONG TIME WHILE STARTING COMPUTER AND IT IS FIALED ON WINDOWS UPGARDING AND CONFIGURING.
THANKING YOU.

Hello kmdavis. I have read the issue you are experiencing. Your computer is experiencing a hardware failure, and you should contact HP technical support for further assistance. Their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition. For some odd reason, it seems my ethernet has not yet been installed to my operating system and I do not know how to do that even with the internet, I have the LAN cable hooked up to my computer but I do not know exactly what to do about it. Is there some sort of driver I need to install, or what? How do I do that without the internet?
This operating system is on a separate partition to my other operating system that is connected to internet already (Windows Vista Premium) that I do not wish to use anymore because of it's corruption. I tell you this because you may know a way of finding the driver files on my previous operating system that I may be able to transfer to the other.

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Windows Vista 32bit or 64bit?

Which is better for my new mac book pro, Windows Vista 32bit or 64bit Ultimate? All I care about is all of my programs and games working properly. And what does 86x mean? Will one version of the bits work faster than the other?

Hi Konnexion,
There is another more important limit with 32-bit versions of Windows, and that is the limit of 2 GBS of RAM per process. Unless some tricks and tweaks are used (which can result in reduced stability), no matter how much physical RAM is installed, a single application can't use more than 2 GBs. This is important for applications that can use large amounts of RAM like video and picture rendering apps, and even some games these days (particularly in Vista).
On the other hand, the 64-bit version of Vista has a number of additional security enhancements over the 32-bit version, such as address-space layout randomization, mandatory driver signing. If you have the RAM (at least 4GBs) and games are not a priority, I would actually recommend using the 64-bit version. Of course, why would you be using Boot Camp, if it weren't for games LOL?
Rich

Treo 750 syncing w/ Windows Vista 32bit

I have a Treo 750 that I had synced with windows xp. Ever since I "upgraded" to windows vista I have not been able to sync. The computer won't even recognize the phone as connected. Here is what I have and what I have tried already. I have, as mentioned, the Treo 750 running windows mobile 5.0/ the laptop was running xp which I had no problems setting up and syncing. I now have window vista 32bit I guess since when I tried downloading WMDC 64bit it wouldn't support the download, so I have WMDC 32bit. When I downloaded WMDC the treo was connected through a usb cable. I have uninstalled and re-installed WMDC several times. Sometimes the device manager will not recognize the usb cable and sometimes it does. When it does recognize the cable it shows a bluetooth symbol and says everything is working properly but when I open up WMDC I am not connected, if I push the sync button nothing happens, if I unplug the usb cable and replug the device manager then will no longer recognize the usb cable. I have also tried everything on the support boards, help forums, you name it I have tried it except a hard reset which I don't want to do until I sync all my info first. Oh yeah the whole reason I am so desperate to sync my phone after such a long time is because my phone constantly freezes up as if I have to much going on which I don't. I have cleaned out every program not necessary so I have tons of memory, so that is not slowing down or freezing my phone. I basically have to soft reset my phone after I do or run 3-4 different applications including phone calls. ANYONE PLEASE HELP EITHER OF THESE TWO PROBLEMS BEFORE MY GIRLFRIEND DUMPS ME FOR SPENDING SO MUCH TIME ON THE COMPUTER TRYING TO FIGURE THIS STUPID THING OUT. THANKS DAVE
Post relates to: Treo 750 (AT&T)

Yeah I have tried that already no luck. Here are some other things that I forgot to mention. I have another laptop that is running windows xp, this laptop has never been synced to anything. I downloaded Microsoft Activesync but it will not connect to that either. The difference with this computer is that when I plug it into the USB port it makes a sound and when I push the usb sync button it makes a beep followed by another beep. Lastly I have another Treo (my girlfriends) that when I first tried to sync to WMDC it did not connect but after running troubleshoots I got it to work on both computers. It is so frustrating.
Post relates to: Treo 750 (AT&T)

Dv6-2018ax Original BIOS for Windows Vista 32bit

I have tried for hours to find the original BIOS for the DV6-2018AX (windows vista 32bit) with no luck. I know there is no BIOS update... I am not interested in that, just the bios it came out of the factory with. If anyone could help me I would be much appreciated. This is for a USB flash... As I cannot recover the BIOS by normal means. Thanks.
This question was solved.
View Solution.

All BIOS versions for your model are posted here:
http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-83686-1&cc=us&dlc=en&lc=en&os=40...=
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

OCCI 10.2.0.3.0 Patch 13 cause crash ntdll.dll on vista 32bit

hi,
I ceated an application using VC++ 2005 and OCCI 10.2.0.3.0 (update patch 13). the application run smoothly on 2000/XP. But if it is run on vista (32bit, tested on several computer), it ocassionally creates crash (not always) when trying to connect to oracle server (also when trying to connect to non existance server, sometimes crash and sometimes successfully displaying time out message),
The crash message is as follows:
Problem Event Name:     APPCRASH
Application Name:     myapp.exe
Application Version:     0.0.0.0
Application Timestamp:     473ad65c
Fault Module Name:     ntdll.dll
Fault Module Version:     6.0.6000.16386
Fault Module Timestamp:     4549bdc9
Exception Code:     c0000005
Exception Offset:     0006278d
OS Version:     6.0.6000.2.0.0.256.6
Locale ID:     1041
Additional Information 1:     97d2
Additional Information 2:     aae4dc92551b959656fcd53b4bc6e928
Additional Information 3:     0701
Additional Information 4:     257a6a00f5b8f65db312588a0172a174
here's the code snippet:
try
     Environment* m_occiEnv;
     Connection* m_occiCon;
     m_occiEnv = Environment::createEnvironment();
     if (m_occiEnv != NULL)
          m_occiCon = m_occiEnv->createConnection(user, pass, constr);
          if (m_occiCon != NULL) return SUCCESS;
catch (SQLException ea)
     m_strLastErr = _T(ea.what());
     return FAILED;
I then tried to upgrade the OCCI using OCCI 11.1.0.7.0 (using the same source code). It also creates random crash but on OraOCIEI11.dll (not ntdll.dll) as follows:
Problem Event Name:     APPCRASH
Application Name:     myapp.exe
Application Version:     0.0.0.0
Application Timestamp:     494c1430
Fault Module Name:     OraOCIEI11.dll
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     48e3389a
Exception Code:     c0000005
Exception Offset:     00103991
OS Version:     6.0.6000.2.0.0.256.6
Locale ID:     1041
Additional Information 1:     298d
Additional Information 2:     d9ff73d6b133e41e5ad025e8ab5a02eb
Additional Information 3:     3eb8
Additional Information 4:     aa3992fb7f26e9ad1e018c76d9dcdb5a
any suggestion?
thank you
Edited by: chn on Dec 19, 2008 3:19 AM

hi again,
I tried to change the createEnvironment into the following:
m_occiEnv = Environment::createEnvironment(Environment::THREADED_MUTEXED);
and somehow, using the latest OCCI 11.1.0.7.0 with the above code, the application seems running well. Tested around 40 times, haven't got any crashed.
When using the OCCI 10.2.0.30 patch 13 with the above code, the application occasionally is still crashed.

Installation PSE7 in Vista 32bit?

Similar Messages

Maybe you are looking for